Allocation of resources to the Department not generating INSERT event in PersonHasQERResource

Similar Questions

• Allocation of resources to the virtual computer

  Hello

  I wonder if anyone can shed some light on what follows.

  When I create a new virtual machine and go the tab of the allocation of resources.  There are two different areas of the reservation.  One that we can configure other seems to be the maintained system.

  When the system is off the reserve which is managed by the system is listed as 126MB.  Once the system is powered on it goes down to about 90 MB and then slowly climbs back up to 126 MB.

  Can someone explain this.

  Thank you
  Mamadou Moustapha

  I assume you mean the memory overhead.

  Take a look at the memory overhead on the Virtual Machines in the documentation.

  If this isn't what you asked, please attach a screenshot of what you are looking for.

  André

• Allocation of resources to the virtual machine over time

  I took trying to graph on the planning capacity in time for our clusters.

  Allowance only for the time being, use maybe later. Try trend how we allocate vms (spikes).

  I care about the elements are:

  Physics: Amount of processors in cluster, physical amount of RAM in the cluster - Total (at some point? don't think it's possible, but it would be nice)

  This part is less of a problem, I have something that works for this.

  Virtual: amount of virtual processors, RAM allocated - Total for each month

  The code has been changed on this topic (thanks, LucD!) and even more of various other segemnts.

  This makes me a nice referential list created of the time to work with:

  $SQLSERVER="MYSQLSERVER"
  $Database="VCDB"
   
  $SqlConnection = New-Object System.Data.SqlClient.SqlConnection
  $SqlConnection.ConnectionString = "Server=$SQLSERVER;Database=$DATABASE;Integrated Security=True"
   
  $SqlCmd = New-Object System.Data.SqlClient.SqlCommand
   
  $SqlCmd.CommandText = "select distinct lower(vm_name) AS vm_name, max(create_time) as create_time " +
                           "from VPX_EVENT " +
                           "where     (event_type like '%.VmCreatedEvent' or " +
                           "          event_type like '%.VMClonedEvent' or " +
                           "          event_type like '%.VMRegisteredEvent') " +
                           "group by vm_name"
  $SqlCmd.Connection = $SqlConnection
   
  $SqlAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
  $SqlAdapter.SelectCommand = $SqlCmd
   
  $DataSet = New-Object System.Data.DataSet
  $SqlAdapter.Fill($DataSet)
  $SqlConnection.Close()
  $DataSet.Tables[0] | Export-Csv c:\vm_create-list.csv -NoTypeInformation
  

  Now that there is a file with the dates, I can use to reach the given date to an allocation of resources aspect:

  $creationtimes = Import-Csv 'c:\vm_create-list.csv'
  
  $realvms = Get-View -ViewType "VirtualMachine"
  
  $myCol = @()
  
  foreach ($item in $realvms) {
       
       $Row = "" | Select-Object CreationTime, NumCPU, MemoryMB
       
       $Row.NumCpu = $item.Config.Hardware.NumCPU
       $Row.MemoryMB = $item.Config.Hardware.MemoryMB
       
       $createtime = $creationtimes | ? {$_.vm_name -match $item.Name} | Select-Object create_time
       if ( $createtime.create_time -eq $null ) {
            # for VMs that exists but db has pruned data, lump into single date
            $Row.CreationTime = [datetime]'12/01/2007 00:00:00 AM'
       } else {
            $Row.CreationTime = [datetime]$createtime.create_time
       }
       
       $myCol += $Row
       }
  
  $myCol = $myCol | Sort CreationTime
  

  This leaves me with a picture of the beautiful collection of dates, number of cpu and the size of the ram.

  I am stuck now trying this summary by calendar month - output something like:

  month,numcpu,memorymb,numOfVMs
  2009-10,2,8192,1
  2009-11,3,12228,2
  2009-12,1,4096,1
  

  In order ultimate spill in tables and graphics with ceilings determined at the time of the first

  I realize that there is probably a way to bind the SQL query method as well and pull it all together in a script. No idea how to transform the DataSet that is returned to a Collection of usable objects.

  Unless someone out there has a great way to draw growth VM distribution over time?

  The Group-Object cmdlet can take more than 1 property group

  Something like that

  $mReport = @()
  $groups = $myCol | Group-Object -Property {$_.Date.Year, $_.Date.Month}
  ...
  

• ESC, space, then enter not generating an event KEY_RELEASED

  There is no event generated for esc, space and enter keys for KEY_RELEASED events. An event is generated for KEY_TYPED well. Is - this intentional or a bug? Are there workarounds?
  
  Thank you

  On my system, I see the key to entry very well with your code. The space key does not record because the button itself captures this event (and it spread like an action event) and it consumes before your event handler.

  If you replace primaryStage.addEventHandler (this) with primaryStage.addEventFilter (this), the key event will be taken during the event capture phase (before the Treaty of the button).

• Provide the Webservice not generating corresponding WSDL URL link based on the service operation.

  Hi all

  The webservice to provide link generates the corresponding WSDL URL based on the Service operation.

  For example, we currently have two service operations namely creating and updating. We use the e-mail of lines. Provide the Webservice correct WSDL URL generated link to the create operation, but it provides the same URL for the update operation as well. kindly share your knowledge if you guys ever faced similar problem.

  Concerning

  Lherault

  Hakan,

  I agree with you that service operations are childs of Services. I am trying to create URLS for the operations of specific service because of the requirement. So if this is the case, then the URL must be different, I think. I tried your logic of selection of all service operations and generate a unique URL for this service. But when I tried to open the URL in Internet explorer all I could find under the label of operation name is a Service operation and not any other selected. I went and checked under the UTILITIES SERVICE--> Service of Directors. Under the WSDL of the Service operation generaed I deleted the existing generated WSDL and then recreated the URL of the web service to provide and the problem is solved. Thanks for your time and effort Hakan... Very much appreciated.

  Concerning

  Lherault

• Delete the rule not generated by DDL

  Hello
  
  I use SQL Developer Data Model (Version 3.1.1.703) and experience the following issue:
  
  I have a table with a foreign key and a delete rule 'SET NULL'. However if I generate the DDL for "SQL Server 2005" then the rule is not there. Only if I change the rule of "CASCADE" then it is generated correctly. Is this a bug or am I missing something?
  
  Thanks in advance for your help,
  Michael

  Hi Michael,

  Thanks for your comments. I logged on that bug.

  Philippe

• Allocation of resources for ESXi v5.1 host host-level default system?

  Someone could you please do me a favor and let me know what that the settings default for a host of v5.1 ESXi for Allocation of resources for the system at the host level? I messed them up and am not sure of the default values.

  Thank you!

  The default settings system resource allocation for a host in ESXi 5.1 are:

  CPU: 280 MHz

  RAM memory: 0 MB

  For more information, see the screenshot.

• value of property not generating a signal event node

  I have a sample program that uses a property node > Value (Signaling) to generate an event.  The property looks like this:

  When I create a VI to do the same thing, the property node looks like this:

  I click with the right button on the Boolean control, create, node, value property (Signaling) to create the node.

  My VI does not generate an event when a value of TRUE is passed to the property node.  Is it possible to change the Boolean Data Type?  What is the problem?

  shall12 wrote:

  My VI does not generate an event when a value of TRUE is passed to the property node.  Is it possible to change the Boolean Data Type?  What is the problem?

  If the data type of the property value node does not resemble boolean (i.e. purple instead of green), you must change the mechanical action of the Boolean because it is currently latch action. Change the mechanical action to switch the action and you should be OK.

  Also note that a value property (sgnl) fires the event to change value unconditionally, even if a new value of the former are the same.

  (If you want to be able to raise Boolean lock action events as you describe here, consider a vote for this idea. )

• vSphere PowerCLI - of different values on the Allocation of resources and 5.1

  Hello

  I have a situation where I was trying to follow in one of our virtual machines that could miss the unlimited check mark on the allocation of memory to the title resources. In doing so, I was in a situation where powerCLI shows values different vsphere for memory and cpu shares until I removed and add the check unlimted box and clicked on OK.

  I guess my question is double.

  1. How will I know if the virtual machine variety is actually being allocated resources properly when there is this difference.

  2. If it's just a property not being pulled to the PowerCLI correctly I presume I can ignore it? If this isn't the case, you know another way to have it acknowledged correctly so I must not go through a hundred servers again and manually perform this procedure.

  Finally, if there is a real problem with the assigned resources hurt if I go through this process and now everything gets double maybe will we have problems with guests not being is not able to manage the new distributions?

  That's what it looks like, top is a bad server and down is a server has been fixed.

  Name: Server01

  MemoryMB: 4096

  NumCpu: 2

  VMResourceConfiguration: CPUShares: Normal / 1000 MemShares: Normal / 25600

  Name: Server02

  MemoryMB: 4096

  NumCpu: 2

  VMResourceConfiguration: CPUShares: Normal / 2000 MemShares: Normal / 40960

  Hope it makes sense.

  Thanks for any idea you may have.

  Shane

  PS... is it just me (IE11) or can't you copy and paste in the editor on this community?

  There is indeed a minor flaw in the value of the shares shows PowerCLI.

  To begin with, what you get for fixed levels are well documented.

  See the distributions of resources

  Which can be seen in the vSphere for a VM client

  

  It is a virtual machine that has 2 vCPU (2 x 1000)

  The cmdlet Get-VMResourceConfiguration to the PowerCLI returns the value that is actually in the VirtualMachine object.

  This value does not seem to take into account the fact that the virtual machine has 2 vCPU, while the vSphere client does not seem to take into account of the # of vCPU.

  

  You can check by doing

  Get - VM MyVM | Select the Name,@{N="CPU actions; E={$_. ExtensionData.Config.CpuAllocation.Shares.Shares}}

  However, if the level of shares is not personalized, the SDK Reference tells us "that if the level is not set to custom, this value is ignored."

  See SharesInfo

  In conclusion, the cmdlet PowerCLI is correct, it returns the value that is there, but this value is irrelevant unless the level is set to Custom.

  PS: I seem to have no problem to copy and paste in the editor.

  Have you tried with another browser?

• Windows Network Diagnostics error message: "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  Everyone,

  I'm trying to configure the WIndows server.  I am running the following: Windows Server 2012 R2 Foundation.

  I did the following:

  1. I crossed the Config Wizard on domain Active Services and installed it.

  2 then I joined the field.  When I reboot the server, I get the following error:

  A. "your computer seems to be configured correctly, but the unit or".

  "resources (DNS server) is not responding.

  A1.  When I put a static IP address on DNS, I can't go to the Internet.  Even if

  I can go to the tank and the PING of the IP address and everything is good.

  A2.  The I change the DNS to get the IP address automatically.  Then I can get to

  the fine of the internet, but I still get the same message about a problem with the

  DNS server.

  Can someone guide me please what the issue is here?  Thanks in advance.

  3. Furthermore, I can't see the new server name/information when I go into Windows Explorer

  as part of the network.

  A. I'll go in Windows Explorer and see the other machines when I look at the network level.  Yet,.

  for the that set up simply, I can't find it, please help.

  Thanks in advance.

  Jerry

  Hi Jerry,

  I would like you to post your question in the forums TechNet for assistance:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  I hope this helps.

• I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

  George in San Diego

  Assuming that Windows XP has been reinstalled just for some reason any...

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• \\mycomputername is not accessible. you might not have permission to use this network resource. comtact the administrator of this server to find out if you have access permissions.

  \\mycomputername is not accessible. you might not have permission to use this network resource. comtact the administrator of this server to find out if you have access permissions.

  Hello

  Thank you for giving us the opportunity to help you with the query.

  I understand the inconvenience caused, now that you have me with you I would take care of that.

  I suggest you refer to the steps suggested byJack MVP (replied on August 29, 2010)

  In the next thread that speaks of a possible solution to the related question.

  PC is not accessible. You might not have permission to use this network resource. Contact the editable from this server to find out if you have access permissions.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/PC-is-not-accessible-you-might-not-have-permission/26a1a479-8BA5-4213-9181-02364c884937

  It will be useful.

  Let us know the status, we are happy to help you further.

• The device or resource (web proxy) is not configured to accept connections on port "8080".

  I move my windows pc to windows 7 10 but its many problems.

  can I roll back to windows 7, my internet connection is always troubleshoot 'device or resource (web proxy) is not configured to accept connections on port "8080".

  First of all, I say I have windows 7 os in the office and we are connected to the network with BSNL Modem LAN cable. Its saying connected and access to the Internet but cannot able to access to any browser.

  I can using only Mozilla Fire Fox his work but other browser do not work.

  Hi Dhyan Singh Talodiya,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. Are all the device drivers and Windows updates are updated?
  2. You have security software installed?

  According to the description of the computer problem is cannot connect web proxy. The device or resource is not set to accept the connection on port 8080. The question might be if there is a corruption of parameters network or security software is limiting. Then, I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1: Resolution of network performance problems.

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Method 2: Are looking for connection settings:

  1. start Internet Explorer.
  2. click on the Tools menu and then click Internet Options.
  3. click on the Connections tab.
  4. by dial and VPN settings, click the broadband connection, click settings, and then click on automatically detect settings.
  5. click on OK.

  Method 3:

  Temporarily disable the software security and user account control exit ramp when connecting.

  Follow the steps described in the article below to temporarily turn off the ramp of user account control and security software.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows/turn-user-account-control-on-off#1TC=Windows-7

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  I hope this helps. Please let us know the results. Feel free to write us again for any further assistance. We will be happy to help you.

  Kind regards

• The computer seems to be configured correctly, the device or resource (DNS server) does not

  When I tried to fix this using other threads, none worked any other suggestions?

  Original title: your computer seems to be configured correctly, but the device or resource (DNS server) is not responding. I tried all of the solutions none works

  Hello

   
  
  This problem is limited to a specific Web site or with everyone?
   

  You can approach this problem in two ways: first by simply disabling the cache, but also by restarting DNS client service, which manages the cached DNS queries.

  
   
  Method 1: Clear DNS Cache

  a. click Startand type cmd in the Start search box.

  b. right click on cmd in the list programs, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. at the command prompt, type the following line and press ENTER:

  ipconfig/flushdns

  Usually, it clears up any issue that may occur.

  
   
  Method 2: Restart the Service DNS Services

  a. Click Start and run, type services.msc, and then click OK.

  b. double-click the DNS Client service. If you receive a Configuration Manager message, click OK.

  c. in the Startup Type list, click on restart and then click OK.

  d. close Services.
  
  e. restart the computer.

  
   
  Method 3: Configure the connection to obtain an IP address automatically

  a. click on 'Start', enter "NCPA. CPL' (without the quotes) in the search bar and press "Enter."

  b. right-click on the network connection, and then click on 'Properties'. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click on select 'Internet Version 6 (TCP/IPv6) Protocol' and then click 'Properties' of .
  
  d. Select "obtain an IP automatically" and "DNS server automatically get an address.

  e. click 'OK'.

  f. highlight "Protocol Version 4 (TCP/IPv4) Internet" and click on "Properties". "" "

  g. Select "obtain an IP automatically" and "DNS server automatically get an address.

  h. click on 'OK'.

  i. restart the computer.

  See also:

  Why I can't connect to the Internet? http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet