ALLOW ALL using list DACL on IP phone

Similar Questions

• I have 30 messages of my Web site users. How can I (1) Replay at ALL using an email. I can't reply to all allows me to respond to each person INDIVIDUALLY.

  I have 30 messages of my Web site users. How can I (1) Replay at ALL using an email. I can't answer all allows me to respond to each person INDIVIDUALLY, and (2) how can I get all the addresses of electronic mail from senders AFTER I FILTER my mails for a list of emails which can only from my site.

  I get tons of mail from my site, and I need an easier way to manage the workflow. each email open and copy the email address for 50 emails would be a lot of work. I just want 'select' all emails, do a right-click and enter all e-mail addresses from senders.

  And, as stated above... Send an email to all by a RESPONSE/option button.

  I found a solution. Updated my Thunderbird, and the app worked. I used v.11.

• Can I use family safety to allow all Web sites in the "public interest" and to block some specified Web sites?

  I use Windows 8 and I want to create an account for the kids to use for homework.

  It seems reasonable to allowing all Web sites in the category 'general interest '. I also want to block specific Web sites that I know can be distracting.

  It seems that this should be easy. I just select the category of the "general interest" and also add sites to the blocked list. However, it gives me not the behavior I expect. I find that in the list of the blocked websites are accessible as usual.

  Shouldn't this approach do I want? In the affirmative, please can you give some advice on why I see this problem.

  Thank you

  Ben

  I found the answer to my original problem - some products McAfee has also installed and was interfering with parental control.

  Ben

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.

• How can I allow all sites to use THE SESSION cookies?

  How can I allow all sites to use cookies for THE SESSION?

  Yes, Firefox keeps cookies allowed unless you use to remove the navigation, search and download history on Firefox to delete cookies.
  You can easily check that yourself.

• I keep getting these messages that do not allow to use a file. What should I change to have privileges for all functions?

  Original title: administrator Win7

  I have win7 and IE11 running on a HP 8540p.  I'm the only person authorized to use the laptop - I am the administrator.

  I keep getting these messages that do not allow to use a file.  What should I change to have privileges for all functions?

  The second file is not cooperating and was not deleted.

  "Not cooperating" can mean many different things. A real verbatim error message would be more useful. In the case of locked files, it is often possible to remove safe mode.

• Am I allowed to use the educational version of the creative cloud to earn money by all means?

  I am a student of the Germany and I all certificates to order a copy of the creative cloud for students. To save money, I want to create YouTube videos and monetize them and I want to start my own Web design startup. Of course, I would also use the creative cloud my studies.  Is it allowed to use the software for this purpose, as long as I am a student?

  Best wishes

  Patrick

  Please visit the FAQ of the teaching Creative Cloud for business / training FAQ

  Can I use Student and Teacher Edition products in trade?

  Yes, Student and Teacher Edition products can be used commercially on your private computer. They cannot be resold.

• iOS 10.0.1 "not allowed to use the restricted network port.

  I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:

  Safari cannot open the page.

  The error was: "not allowed to use the restricted network port.

  On iOS 9.3 using Safari 9, the same URL opens fine without this error.

  Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.

  I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.

  It seems I was looking at the wrong source code.

  I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.

  https://trac.WebKit.org/browser/releases/Apple/Safari%20Technology%20Preview%201 3/WebCore/platform/URL.cpp

  It seems port got 4190 recently added to the list of blockedPortList

  2306	2049, / / NFS
  220V	3659, / / apple-sasl / PasswordServer [addition of Apple]
  2308	4045, / / lockd
  2309	4190, / / ManageSieve [Apple adding]
  2310	6000, / / X 11
  2311	6665, / / alternate IRC [addition of Apple]
  2312	6666, / / alternate IRC [addition of Apple]
  2313	6667, / / standard IRC [addition of Apple]
  2314	6668, / / alternate IRC [addition of Apple]
  2315	6669, / / alternate IRC [addition of Apple]
  2316	invalidPortNumber, / / used to block all the invalid port numbers
  2317	};
  2318	const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);

• How can I put the Windows XP firewall in a port configuration 'allow all' and only block some ports?

  Without going into the details of why I need to do this, I'm putting the firewall of Windows XP in one allow all the configuration of ports and only refuse some ports I have in a list.

  I train this script via the command-line batch with the netsh firewall add portopening command.  From what I've read, if enabled the firewall denies all traffic and only allows ports with exceptions, so through batch scripts, I opened all the 65 000 + ports TCP and UDP, essentially with the firewall turned on but in a configuration of "allow all the»  I don't deny the 100 or so ports to my list that I want blocked after they are all open.

  This strategy seems to work, but the problem I waited and I now see is that svchost.exe takes 50% of my CPU time, have to deal with constantly these firewall rules.

  "From what I've seen on Windows XP, there is no way to have the firewall ON, and in a configuration of" allow all the "" because the XP firewall may not have defined port ranges, they must be defined one by one.  It looks like Windows Vista or 7 would be much easier because the firewall has got a re vamp of advanced features.

  Does anyone have a suggestion on how to realize this "allow all", deny some' strategy?  I know it's a strange use of the Windows Firewall, so let's please jump in front of a 'why would you do this incredibly stupid thing?"messages.

  Also, if it was the wrong forum (or website) to post on for this kind of question, I'd appreciate a recommendation of a more appropriate forum.

  Hello

  See the steps in the following article.

  How to manually open ports in Internet Connection Firewall in Windows XP?

  http://support.Microsoft.com/kb/308127

• Amtrak Train map tracking: not allowed to use Google Maps Client ID

  Amtrak introduced a card to follow up on their Web site at http://www.amtrak.com/train-routes.

  To access this feature by clicking on the "Get followed now > > >" link (Javascript required), a Google with Amtrak routes map begins to display, and then stops. A dialog box error including 'this site is not allowed to use the Google Maps provided client ID,' is displayed.

  This feature to function correctly on Internet Explorer 10 and even own Google browser Chrome. The only browser in which it fails is Firefox. I upgraded FF23 FF24 without change. I tried a restart of the FF24 in Mode safe... no change. I disabled and enabled Java, Flash, Silverlight without change.

  Firefox 24.0 on Windows 7 64 bit.

  Hello GP49,.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• What is the use of the keyboard of phone numbering alphabet

  What is the use of the keyboard of phone numbering alphabet

  I could be misunderstanding your question, but if you mean the letters below the numbers on the keyboard of the phone (for example the ' ABC' below the 2), use only one of them is for companies of advertising with easier to remember numbers. For example, Apple Announces the number (800) MY-APPLE which is composed as (800) 692-7753 words are easier to remember and the numbers on the keyboard allow to translate the letters to numbers that you dial.

• I want my pictures to download on my iCloud but I don't want all my previous photos on my phone because there are just a lot of space and I have run out of space. Can I disable sharing photos, but let it download photo stream to make it happen, or how I c

  I want my pictures to download on my iCloud but I don't want all my previous photos on my phone because there are just a lot of space and I have run out of space. Can I disable the download of photo sharing but allow for photo streams to make this or how can I make this happen? I just want to still my photos go to my Mac and iCloud so I can have my photos without danger...

  Thank you

  N °

  iCloud is a synchronization service, NOT off of storage of the unit.

  You could cut the phone out of sync from your library. Just move them to your Mac and synchronize your Mac with iCloud. Now, you'll have plenty of space on your phone, but no pictures.

  From your Mac, you can then make an album with photos that you want to access from your phone. This will require ongoing work, but will keep your clear phone in most of the time.

• Any store allowed to use some of the real apple for repair in Australia?

  Hello

  I wonder if repair in Australia are allowed to use the authentic part of Apple for a replacement of the screen.

  I heard somewhere that repairers of all third parties are not allowed to use the real part, but when I called a store near my house (Foneking) they said they use a real part and it costs $129.

  Someone who works at Apple ever heard talking? If not, could you please let me know if it's true?

  Thank you in advance.

  Only Apple or Apple authorized service providers are a legitimate source for original spare parts. Apple doesn't sell parts. Independent repair shops use used parts, counterfeit or stolen. One such independent repair shop owner admitted to buying parts that were "misappropriated" (i.e. stolen) factories under contract to Apple. Then, I seriously question the ethics of the repair shop you've talked about.

• Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

  \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
  I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
  There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
  What I've tried so far on my pc (XP Pro):
  1. click on start, run, type regedit, and then click OK.
  2. Locate and double-click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. on the right side, double-click restrictanonymous setting.
  4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
  5. close the registry editor.
  6. restart the computer.
  I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
  File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

  The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

  Hello

  Please visit the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7

• "All programs" list empty

  Yesterday, I noticed that when I click on "All programs" in the Start Menu, there are all the programs listed. I can still access all of C:\Program Files, so I know that I've accidentally deleted all the programs. Is it possible to restore them to "all programs"? Attached is a link to my "All programs" list look like now.

  Hi LisaEB,

  1. you remember to make changes to the computer before this problem?

  It seems that if you have something close to 70 or more shortcuts/folders in the all users folders & Start Menu/user combined program, the list of all programs will eventually be empty or empty. Check the number of recent programs that can be displayed in the Start Menu.

  Method 1:

  a. click Windows orb to open the Start Menu.

  b. right-click on all programs, and then select open.

  c. double-click the folder programs. There should be a list of folders.

  d. create a new folder.

  e. Select a bunch of files in the folder programs and drag the folders to the new folder.

  f. restart your computer and check if the programs are shown when you click on start > all programs.

  g repeat the above steps until the list is displayed in all programs.

  Method 2:

  You can also try the following steps and check if it helps...

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  a. Click Start and type regedit.exe.

  b. Select regedit in the search list.

  c. now, navigate to the following keys:-
  HKEY CURRENT USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  d. the value of Start Menu to "%USERPROFILE%\Start Menu".

  e. go to HKEY LOCAL MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders.

  f. common value Start Menu to "%ALLUSERSPROFILE%\Start Menu.

  g. close the registry editor and restart the machine.

  Hope this information is useful.