Allowance to the same level

Similar Questions

• How to display the menu bar and address at the same level?

  Firefox 4 seems good, but a major problem is that the menu bar, the bar tabs and the Navigation has a bar a clean upper-left line in the window, with mainly two effects:

  1. Much space wasted on the top right
  2. The real web window being compressed very vertically, so if you have a laptop or widescreen for another reason, then it isn't really a lot of space on the left for navigation.

  The Compact Classic add-on does not solve this problem, but with the adverse bars becoming quite small and rather hard-to-reach buttons. A better solution would be to show the menu bar and the Navigation bar at the same level, but how?

  Default on Win7, Firefox 4.0 not same poster not the Menu bar - the orange Firefox button is displayed. Right-click on the Menu bar and click on the menu bar in this context menu to deselect. When you have the orange Firefox button projection and the menu bar is hidden, you can access the Menu bar by pressing the ALT key .

  Or, you can open the toolbar Customize mode and move items from Navigation bar in the Menu bar, and then hide the Navigation bar.
  
  https://support.Mozilla.com/en-us/KB/how+to+customize+the+toolbar
  
  http://KB.mozillazine.org/Toolbar_customization

  In addition, there are a number of compact menu extensions that deal with compaction of the Menu bar down to a button that replaces the menu bar and provides a drop-down list of these menu items. Or extensions that allow you to Customize the Firefox button menu and add menu items that aren't there, but who are in the menu bar. Using most of these types of extensions involves using customize to move the items according to your tastes.

• Easy VPN setup with interface to multiples with the same level of security

  Hello

  I want to configure an ASA 5505 with 7.2 (4) software and dual license ISP and when I configure two interfaces with the level 0 on two security interfaces and enable vpnclient the trace message appear:

  ERROR: Cannot determine the internal and external interfaces Easy VPN remote: multiple interfaces with the same levels of security.

  vpnlclient of configuration above:

  vpnclient Server x.x.x.x where x.x.x.x
  vpnclient mode network-extension-mode
  vpnclient nem-st-autoconnect
  vpnclient TUNNEL_EZVPN_TUNNELSPEC vpngroup password *.
  vpnclient username usr_ezvpn_tunnelspec password *.
  vpnclient enable

  interfaces:

  interface Vlan200
  nameif outside1
  security-level 0
  IP x.x.x.x 255.255.255.252
  !
  interface Vlan300
  nameif outside2
  security-level 1
  IP x.x.x.x 255.255.255.128
  !

  monitor the SLA to the routing:

  monitor SLA 100
  type echo protocol ipIcmpEcho 200.221.2.45 interface outside1
  NUM-package of 5
  frequency 30
  monitor als 100 calendar life never start-time now
  ALS 200 monitor
  type echo protocol ipIcmpEcho 200.154.56.80 interface outside2
  NUM-package of 5
  frequency 30
  Annex monitor SLA 200 life never start-time now
  ALS 300 monitor
  type echo protocol ipIcmpEcho 4.2.2.1 interface outside1
  NUM-package of 5
  frequency 30
  Annex monitor SLA 300 life never start-time now
  ALS 400 monitor
  type echo protocol ipIcmpEcho 200.244.168.149 interface outside1
  NUM-package of 5
  Timeout 3000
  threshold of 3000
  frequency 30
  Annex monitor SLA 400 life never start-time now

  Follow-up:

  !
  track 1 rtr 400 accessibility
  !
  Track 2 rtr 200 accessibility
  !

  routes:

  Route 0.0.0.0 outside1 0.0.0.0 x.x.x.x 100 track 1
  Route 0.0.0.0 outside2 0.0.0.0 x.x.x.x 200 track 2

  The track works normal.

  Kind regards!

  Try using the command "backup interface" on the secondary ISP interface.

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/command/reference/b_72.html#wp1338585

  You need to increase the level of security to 1 for this interface.

  By default, EasyVPN uses the highest level of safety inside and the lowest outside.  Anything between the two must be set manually.  I assume you have an interior vlan defined but not added to the posted config.

• How to make all audio at the same level?

  I have a sequence of many clips in first pro, and I could swear I've heard of a way to make all audio on the same level or db. Is there a way to do this? I have a few clips in the timeline with different levels and should be old enough to go to manually balance their volume.

  There is a way to do what you want, but it must be used with caution.  If you open the Audio Mixer Panel, select mixer of track and the track that your clips are on.  Click on the arrow at the top left of the track work (you may need to do it twice) and and access the small white window that goes down.  (See using Adobe https://helpx.adobe.com/pdf/premiere_pro_reference.pdf page 365 if you have not done this before) In the right side of this window, right-click on one of the spikes back arrow and select Amplitude and Compression and dynamics.

  

  The word dynamic appears in the white window at the top of channel mixer.  Left click on the word dynamic and select Edit.  I pasted below the appropriate settings.

  

  If you are not familiar with Compressor/Limiter, use the parameter above.

  Now read your timeline and listen carefully while I look at the counters this setting should be good for normally recorded material, and I hope that you do have to do something more. If there is still following problems may be necessary. Schedule audio below (2) drag any clip that's too soft.  All that is too strong to do drag on the calendar below that (3). For the dynamic audio editing 2 repeat the process with the effect but change the makeup to 12.00dB.  For editing audio 3 change the makeup to 0dB setting.  It's not perfect, but it should give you a low-tech solution.   I hope this helps.

• How to set the audio to all be at the same level?

  I have a file where a speaker recorded in his laptop and sometimes he sits in his chair and his voice sounds like he's going in the background shortly. Then, later in the track, it gets closer to the computer again and the audio to good level. What the best and easiest way to adjust the audio set is stable all the way or on the same level set?

  Try the effect of speech Volume Leveler menu effects/Amplitude and Compression. There are other ways to do this either manually or using a compressor, but in this case for a quick and dirty solution, the speech Volume Leveler can do the work for you.

• generate a diff xmlelements at the same level

  How can you generate different xmlelements at the same level. for example as follows:
  

  <APPLICATION NAME="test" DATE="30-NOV-12">
    <ELEMENT1>
       <ELEMENT1_ATTRIBUTE1>
    </ELEMENT1>
    <ELEMENT2>
       <ELEMENT2_ATTRIBUTE1>
    </ELEMENT2>
  
  </APPLICATION>

  item 1 and item 2 are at the same level.
  
  I tried to generate, but have failed so far.
  I want to extract data from table 1 element1, item 2 data from another table, both tables are not related.

  Hello

  You can nest 2 XMLELEMENTs inside an another XMLELEMENT, like this:

  SELECT XMLSERIALIZE ( DOCUMENT     -- for display only
       XMLELEMENT
       ( "APPLICATION"
       , XMLATTRIBUTES ( 'test' AS "NAME" )
       , XMLELEMENT
         ( "ELEMENT1"
         , d.dummy
         )
       , XMLELEMENT
         ( "ELEMENT2"
         , u.username
         )
       )
         )               -- XMLSERIALIZE
                        AS txt
  FROM         dual     d
  CROSS JOIN  user_users  u
  ;
  

  Output:

  TXT
  ----------------------------------------
  
    X
    FUBAR
  
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

• The same level everywhere in the sound project

  Hello

  I have the 14 items first.

  My film was shot in several places with different volumes.

  Y at - it a command that does the same noise level throughout the film?

  Thank you

  Eli

  There is no auto command for this.

  However, if you open the Audio Mixer Panel (under the Tools menu), you can monitor your levels and make sure they peak between-6 and zero. And you can adjust the levels for each video clip by increasing or decreasing the "elastic" yellow which crosses each clip.

  Don't trust your ears or your computer speakers. Use the Audio Mixer Panel to make sure that you analyze your audio levels with precision.

• Pages Unathorizzed and allowed in the same application

  Hello! This may seem a strange question, but I'll post it anyway.
  
  I have an application that allows users to enter data (which are care for example). I want only certain people to be able to access these pages. In the same application, I have several reports, I want anyone to be able to access it, not need to login. For now, I have divided the 2 functions in separate applications, but it is very laid back and forth between switching applications. Is it possible to do this in a single application? I don't want to duplicate reports in 2 separate applications... it would be a maintenance nightmare. Or do I need a generic connection that allows anyone to view specific pages? The 'public' users do not have to log in to view this information now, and I wouldn't have to do with this new application.
  
  Any other ideas how can I accomplish this?
  
  Thank you!
  Jodie

  Not a weird question at all. Just do a current appropriate authentication scheme and set the security attribute of each page to Page public is public.

  Scott

• Can I change the default 'a' character to a version on the same level?

  The font that I use (Proxima Nova) has two and double-floor ' of the default character is doubley floors 'a', but I much prefer the version of bungalow "style alernate."

  Rather than do a find + replace each time that I use the police, for each different weight, is possible to change the value default for every time I type it display the version level?

  Probably no matter much for body copy, but I really don't like it to the display size, and I want to stay consistent when I use the police.

  Find + replace would be ok if I didn't have to do it for each weight of the font.

  Here is what the characters look like in my glyphs Panel:

  

  I'm under Indesign CC on OS X 10.8.5.

  If this is not possible from InDesign, anyone happen to know how to change systemic?

  Proxima Nova has 'Stylistic sets' of upper right, a context menu of the character panel choose - Opentype/Stylistic Series/1 and then as rightly says Peter make a paragraph style. You can also choose stylistic sets of opentype from the paragraph styles dialog box section.

• Can burn is no longer my music on a CD - RW with Windows I Tunes, error message says is no longer can read or write on the discs. Allows burning the same disc on a Mac, why?

  Why does my version of Windows of I Mac is more will allow me to burn music to a CD - RW, it keeps saying it can't read or write on the discs. Why? I had previously burned discs with I Tunes without any problem.

  This article may help:

  12 iTunes for Windows: If you have trouble burning a disc

  especially the last paragraph.

• How do reset you all the volume levels of the mixer at the same levels?

  When you manually set a certain level of volume for different programs how you define all programmes at the master volume level?

  do not reinstall the sound driver, use this

  //////////////////////////////////////////////////
  OFF @ECHO

  ECHO Reset settings Volume mixer...

  NET STOP Audiosrv

  NET STOP AudioEndpointBuilder

  REG DELETE "HKLM Explorer\LowRegistry\Audio\PolicyConfig\PropertyStore" /F

  REG ADD "HKLM Explorer\LowRegistry\Audio\PolicyConfig\PropertyStore.

  NET START Audiosrv

  /////////////////////////////////////////////////
  Save .bat & run with admin

• How to group multiple columns at the same level and sum one

  With the following XML data, I want to simulate the following query in the model. Exactly how can I accomplish this?
  
  Thank you
  Kurzweil4
  
  < pre >
  < G_MAIN >
  < LINE_CREATION_DATE > 17 December 09 < / LINE_CREATION_DATE >
  XYZ < ITEM > < / ITEM >
  HHOENT < PLANNER > < / PLANNER >
  < ITEM_TOT_PEND_QTY > 7000 < / ITEM_TOT_PEND_QTY >
  COMPANY ABC < client_name > < / client_name >
  < CATEGORY_SEGMENT1 > UU98 < / CATEGORY_SEGMENT1 >
  < OSTAND_QTY > 1000 < / OSTAND_QTY >
  SHIP_001 < LOCATION > < / LOCATION >
  JJK < SHIP_FROM_ORG > < / SHIP_FROM_ORG >
  < ITEM_TOTAL_OSTAND_QTY > 38000 < / ITEM_TOTAL_OSTAND_QTY >
  < / G_MAIN >
  < G_MAIN >
  < LINE_CREATION_DATE > 17 December 09 < / LINE_CREATION_DATE >
  XYZ < ITEM > < / ITEM >
  HHOENT < PLANNER > < / PLANNER >
  < ITEM_TOT_PEND_QTY > 7000 < / ITEM_TOT_PEND_QTY >
  COMPANY ABC < client_name > < / client_name >
  < CATEGORY_SEGMENT1 > UU98 < / CATEGORY_SEGMENT1 >
  < OSTAND_QTY > 1000 < / OSTAND_QTY >
  SHIP_001 < LOCATION > < / LOCATION >
  JJK < SHIP_FROM_ORG > < / SHIP_FROM_ORG >
  < ITEM_TOTAL_OSTAND_QTY > 38000 < / ITEM_TOTAL_OSTAND_QTY >
  < / G_MAIN >
  < / pre >
  
  < pre >
  SELECT
  LINE_CREATION_DATE,
  AGENDA,
  PLANNER,
  ITEM_TOT_PEND_QTY,
  CLIENT_NAME,
  CATEGORY_SEGMENT1,
  LOCATION,
  SHIP_FROM_ORG,
  ITEM_TOTAL_OSTAND_QTY,
  sum (OSTAND_QTY)
  Of
  table-name
  Group
  LINE_CREATION_DATE,
  AGENDA,
  PLANNER,
  ITEM_TOT_PEND_QTY,
  CLIENT_NAME,
  CATEGORY_SEGMENT1,
  LOCATION,
  SHIP_FROM_ORG,
  ITEM_TOTAL_OSTAND_QTY
  < / pre >

  http://winrichman.blogspot.com/search/label/grouping

  Certainly, we can group any level that you want

  for each group with data semi flattened

  Count and sum based grouping (could be linked to the crosstab)
  How to make a total in my model?
  Where is my Total issue

  It's a group on the Date of creation
  or

  It's a grouping on the POINT

  or

  It's a grouping on the POINT and PLANNER

• Why all the account folders are created inside my Inbox instead of on the same plane?

  Adding 2 accounts in Thunderbird it will only create the folders, trash, Junk, sent, Archive and models inside the Inbox. I want that they all on the same level as the Inbox as in my other 3 accounts.

  This is usually defined by the IMAP server, that some have so on one level, others insist that they hang out of the Inbox.

  Take a look in the menu (alt + T) tools > account settings > server settings > advanced

  Under the personal namespace, try inserting "Inbox" but make sure that you enable allow the server to roll over. If this is the Inbox, change to «» Sometimes these work, sometimes they do not. Really depends on the server.

• queries of the same-security-traffic command

  Dear experts,

  I wonder if put in the "same-security-traffic intra-interface permits" or blanket orders 'same-security-traffic licence inter-interface' will make the traffic to "bypass" the ACL for the interfaces with the same level of security?

  Your response is much appreciated.

  Glenn

  The short answer is Yes if there is an access to the interface list then there must be an entry allowing traffic to be allowed back.

  For more details, take a look at this document.

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a0080734db7.shtml#T5

  HTH

  Jon

• Creative Office Cloud | Apply the same updates, over and over again.

  My CC application apply the same updates to 6 products almost every day.  Even updates, same version number, exactly the same level of detail.  I'm not one missing a revision.01 - they are all the same.

  OS X Mavericks.  Applied last CC Office today.  Same question.

  I really don't want to uninstall and reinstall the applications and plugins.  Such things should work the box 50 PCM.

  Please notify.

  Hi QCM UK,

  Please try the mentioned below as follows:

  1. navigate to ~/Library/Application Support/Adobe/AAMUpdater/1.0 and rename it.

  Allow the user library: http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html.

  2. activate the root account and place you ~/Library/Application Support/Adobe/AAMUpdater/1.0 and rename it.

  Enable the root account: http://support.apple.com/kb/PH14281.

  Launch desktop CC and let me know if still the same issue.

  Kind regards

  Romit Sinha