Problems of House administrator XP

Similar Questions

• I'm trying to download a game called football superstart, but there is a problem because when I try to open it there is a message that says that there was a problem with the administrator of the House

  OK im trying to download soccer superstar but I can download it but I can't open it because it shows a message that says that there is a problem with the House administrator I will try to find a solution to this problem can you guys please help me thank you.

  Hello

  1. could you give us the exact error message?
  2. based on what site you are trying to download and install the game?
  3 are logged as an administrator of the computer?

  Once the installation file downloaded, I would ask you right-click on it and select run as administrator and then check.

  I hope this helps.

• I am running Windows XP and I'm trying to upgrade to Windows 7. There seems to be a problem with the administrator no no not the permission to create a file?

  I am running windows XP.  I try to install the upgrade to windows 7.  I was on the phone with technical support of 4 - 5 times, and they may not always help.  There seems to be a problem with the administrator and with not not permission to create a file?  I have a HP desktop computer. Can anyone help?

  original title: help with Windows 7 install

  Hello

  ·         Account administrator that you use?

  ·         You have the disc to install Windows 7 or upgrade disk?

  Follow these steps and check if that helps.

  Step 1:

  To see if your PC is ready for Windows 7, download free Windows 7 Upgrade Advisor. It scans your PC for potential issues with your hardware, devices, installed programs and recommends what to do before upgrade you.

  Windows 7 Upgrade Advisor

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Step 2:

  Follow the exact steps in this article and check if that helps.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  Note: Make sure that you back up all important data on the computer before you install Windows 7.

• Problem with the administrator user account

  When I connect to my administrator user account a Windows Sidebar message immediately rises:

  "Settings.ini is being used by another process. Close the other program, and then click Retry, or click Cancel to exit sidebar. »

  The problem is that there is no other program to close so I click on no to cancel. There is also a message from Catalyst Control Centre (program of ATI technology video card) that comes immediately after the message of the sidebar:

  "The host application has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »

  I click Close Program, but no notice is. Try using Windows, I get the message "help topic is not found." I tried the system information (msinfo32.exe) and get the message "cannot collect information cannot access the Windows Management Instrumentation software.» Management of Windows files may be displaced or missing. » !!!

  All the above problem ONLY happens in the administrator user account. Both regular user accounts work fine. Windows help works very well, information system works very well!

  I'd appreciate any help to solve this problem of crazy.

  ZekeF

  If you "move" the files/folders to PUBLIC folders, you can then access them when you are in the new admin account and then you can place them in your personal folders.
  If you do not Move To and copy to options in your context menu, here is the tutorial to "help":
  http://www.Vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.html

  When you have completed the tutorial, try this...
  Right click on any folder/file > click Move To > scroll to the destination where will be moved to the folder/file > click on move.
  That's all. The file/folder is moved.

  Public folders are accessible to all user accounts on the computer.

• problems with the administrator account

  I turned on our computer and clicked on my profile which is also be the administrator account and the computer says "service profile Service user has no connection" "could not load the user profile.
  Can I use both the UserProfile with my children.  We tried to access the administrator account, but it requires a password that I don't think we have.  Is this some kind of virus that affected only the profiles?  That is to get the administrator account working again?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems of the administrator.

  I am the only user and administrator (checked) my computer. A week ago I have upgraded from Windows 7 to Windows 10. Encountered many problems with Windows 10 which I could not download or modify anything without the permission of the administrator, but I am the administrator checked! After a frustrating weekend decided to go back to Windows 7, but still, no problem can not do anything without the permission of the administrator, even though I am the administrator. I'm stumped, help please.

  You take ownership of your records, and then give you full access - see here:
  https://TechNet.Microsoft.com/en-us/library/cc753659.aspx
  https://msdn.Microsoft.com/en-us/library/bb727008.aspx

  If it looks threatening, then you might ask a friend to gifted in computer science to help or give me remote access to your machine. You are in the unique position that you have nothing to lose!

• I have a problem with the administrator account.

  Original title: administrator account is down: no-show to secure boot, will not take password (no defined) to allow facilities. What now?

  I am the only user on my PC Windows 7 Home Premium and have been using it until as recently as an administrator. After learning that it was better to use a standard-privileges account yesterday, I went to the user accounts and brought a few changes, which I am not convinced that I remember exactly, but which provided for the creation of a new account administrator called "Administrator", giving this account a profile picture and changing my personal account with standard privileges. I may have set the password of the new account to be the same as the former, or may not have specified a password, but I know that I didn't not create a new password. Anyway, now I can't do anything that requires administrator privileges.  When the window opens to allow an action preferred by logging in as 'Administrator', or my old password or all simply hit the "Enter" button works. I know that this is the administrator account, I created, because there the thumbnail profile photo that I assigned to him. A used computer scientist Ophcrack successfully, which correctly specified the password of my account now-standard and said that the password of the administrator account was nothing. The newspaper in the boot prompt, administrator does not appear as an option in profile, and it does not appear in the start Mode menu safe either.  The situation is desperate now? What can I do? Thanks for any help!

  When changes to an administrator account, then the safe way goes like this:

  1. Create, test, and document an admin account to spare, even you have a spare House key.
  2. Change your normal administrator account according to your needs.

  If you don't take these precautions, then you can do this:
  1. Use your repair Windows CD to start the machine in Repair Mode.
  2. Use system restore to set Windows to a point before you did what you did.

• Dreamweaver & amp; Problem of the Administration to contribute

  I have a strange scenario for a client site that I inherited after that several other developers have participated over the past 2 years... I'm afraid that whoever created the Administration interface contribute is one where there is some legal problems involved, and there is no relationship left. If I contacted them, they would not cooperate. Sad but true.
  
  What I want to do is remove the previous link to Contribute and then reinstall a new Contribute site administration I can drive now. I use Dreamweaver MX 2004 (yet) and have no problem at all by accessing an FTP client site, but the second problem is that I have in fact a full access to the server hosting control panel, as is usually the case. So, if this will involve deleting specific files, I will need to know what to look for (if it is in my opinion) or what to order the contractor accommodation to find and remove.
  
  I currently have to update all the content on the existing, but that is not very effective site design and it is to my benefit to me to do the content updated daily to update that the client could easily manage themselves through Contribute. Whenever I first access the server via FTP from Dreamweaver to download new files, I am invited on activation of connectivity in Contribute. I have Contribute, but have no client Administration contribute key or details. Those who are forever lost, I'm afraid.
  
  I recently renewed its site, and it would be ideal to allow my client to use Contribute. However, I am stuck in a loop because there is no way to access the keys to Moose Contribute site. How can I find and remove the current Administration to contribute, then reinstall Contribute with the new Administration contribute to the site? If I try to manage the site via Dreamweaver (Manage Site - tab to contribute), once it checks through the cache, I get an error that says: "could not find a page at the URL specified site root." Please check the URL the site root. "I wonder if the previous developer may have actually deleted something just to be mean... they were pretty vile and lack of professionalism on many things.
  
  It is far from the typical scenario, I'm used to where I always have total control over the hosting environment, too. However, relative to a part of their site e-commerce site, when I had problems and knew what to ask, hosts sites have been quite reactive. I might be able to request specific files to delete if I could know only what to send it to.
  
  Any ideas? Thank you very much.

  > What I want to do is remove the previous link to Contribute and then reinstall
  > a new administration to Contribute site that I can drive now.

  based on just the sentence above in your wordy post, if you want to remove a
  previous connection using brute force to contribute:

  Open a third-party FTP client and connect to the remote server.
  Look for a folder named _mm that contains a file named contribute.xml

  delete this file and folder.

  The site has more an installer of contribute, and no existing contribute users
  will be able to connect.

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• A software problem in-house RT VI (Invoke node in stockFPGA)

  Hello world

  I would like to know what means this error...

  I wouldn't change a thing on FPGA and supported screw RT of NOR.

  Error message below

  An internal software error occurred. Contact National Instruments technical support on ni.com/support. Error details:
  1: invoke the node in StockFPGA_IntfScriptConstGivenTypeDescriptor.vi-> StockFPGA_IntfScriptReadBigControl.vi-> FPGA_IntfScriptReadWrite.vi-> niFpgaGenerateDynamicReadWrite.vi-> nirviReadWriteControl.xnode:nirviReadWriteControl_GenerateCode.vi:3-> nirviReadWriteControl.xnode:nirviReadWriteControl_GenerateCode.vi.ProxyCaller
  
  Name of the method: create data type

  Thank you

  Hyo

  Today, I easily solved this problem!

  It was the old bug. Replace the old function of read/write with read/write function is the way to solve this problem!

  Thank you very much.

  I'm sorry for taking your time.

• HP G62: Problems with password administrator and Power On

  Please, I forgot the administrator password or power on password for my hp G62 with windows7. I tried several times to password and now it says "Sytem Disable 77334380".

  Hello

  Use the code to reset below

  68092906

• Problem with the administrator account of the domain on Windows 2008 servers

  After changing our domain admin password, all servers 2008 report on the account locked when you try to connect.  The account shows not locked in AD.  2003 servers are not affected.  Anyone can shed some light on this problem?

  Hi patdav_adh,

  Your Windows is beyond the scope of what is handled in this forum of consumer. I suggest you repost among the public IT to Technet Windows Serverprofessionals. Thank you!

• problems with the administration console

  Cannot connect to the administration Console.

  Edition of FMS 4.5 Dev works locally

  http://localhost

  http://ComputerName

  http://IPAddress

  All loads the splash screen

  RTMP://localhost

  RTMP://ComputerName

  RTMP://IPAddress

  with precise username (verified by install Dir/conf/FMS.ini)

  password is very generic, while the chain exist that I fubarred, it is thin.

  What are my options?

  Uninstall/reinstall?

  All others?

  Most likely port 1111 is closed on your server. That open and I'm sure it will work.

  Also, make sure that the administration service is running.

• activation problems, win7upgrade House, cannot intall win xp tomake W7 work

  OK and thanks for any help in advance, my old system got power surge fried bad my sys, rebuild, had a drive PATA i was usin for backups, unfortunately in my ACE try and save this info I had on the old road before it totally failed, I could only do w7-64-restore, the really bad news there was my activation of false messages etc.since was a version upgrade. I had an old LP I'm tryin to charge drive win XP, but xp does not recognize my disc, ive reformatted it partioned it etc I get win xp start ive done everything I could think of, but it wont let me get to the activation screen fails to recognise the HARD disk and windows will not give more, hell Ive even tried to reload my edd 2nd W98. disc and no love? very Frazzled anything u think im doing wrong?

  Thank you all, it was a total pain to reformat my backup disk then ran w7in 32-bit mode, then I have xp transferd dvd to the other formatted disk, he finally let me install win xp disk then win7 finally recognized xp heures.23 ive been standing bangin my head constantly got (ntldr) and (mbr) error messages and forget trying to run win 7 If your in 64-bit mode will let u do.

• The folder administrative tools devoid of orders for the print spooler problem that is stopped.

  I could not install my printer because the spooler is stopped.  According to Windows help, the problem can be solved by administrative tools.  But the biggest problem is: the Administrative Tools folder contains anything other than "Windows SuperShell Modules.  The Service order through which is accessible the print spooler service is NOT there.  Is there another way I can make the spooler running?

  Hi francisco a.sanchez,.

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Disabled administrator & * no standard way * to change

  A. c. difficult problem of how to re-enable the administrator account.

  First, after starting, I have minor difficulties logging in French - get green with screen

  "You cannot connect because the logon method, you use is not allowed on this computer...". »

  After clicking on the boxes, I get a choice between 'Comments' and 'User' - can I enter and enter in "Mike / no password" account and open the Windows 7 desktop.

  But then the administrator account is disabled - so I can't use any computer-modification prog.

  I get "Do allow you the following program modifications, etc.?" with the hidden option YES! - and no way to type the administrator password.

  I tried the standard recommendations - and none works:

  • * from the command prompt - "net users administrator / Active: Yes"-I get "System 5 error has occurred...". Access is denied. "
  * authorization - run as administrator - accessories/command area from bleached

  * lusurmngr.msc - allow me to change accounts

  * netplwiz works not-same box leave blanked

  * User accounts Panel of configuration-box permission set in white

  * SAFE MODE - problems of connection/administrator- and no possibility of problems antivirus computer-modified running as Rkill

  I scanned with AVG and Malware Bytes, that found no problems.

  Now what? How do I reactivate administrator? Thanks for any help. Please note - I looked long and hard at this prob. on the net.

  Ok. We now know that you have a single administrator account. He is named Administrator. It is not active.

  We also know that your account is active. He is not an administrator account. He is active.
  Now, you must do this:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before on behalf of Mike demoted (because it used to be an administrator account when you first loaded Windows!).
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.