Alter tablespace name wrong when creating data file

Similar Questions

• accidentally create data file with the same name but different location

  Hi all
  
  I was accidentally create data file in the tablespace with the same name but in another location.
  
  / U03/DataFile/REKON65. DBF
  
  new data file: / u04/datafile/REKON65. DBF
  
  My question: what happens with data/u03/datafile/REKON65 file. DBF? the data inside/u03/datafile/REKON65. DBF went?
  
  
  Thank you

  Indra says:
  Hi all

  I was accidentally create data file in the tablespace with the same name but in another location.

  / U03/DataFile/REKON65. DBF

  new data file: / u04/datafile/REKON65. DBF

  My question: what happens with data/u03/datafile/REKON65 file. DBF?

  nothing

  the data inside/u03/datafile/REKON65. DBF went?

  not gone

• Roll forward standby database with the incremental backup, when a data file is deleted in primary education

  Hello

  I'm nologging operations + deleting some files in the primary and you want to roll forward the day before using the incremental backup Yvert.

  I do in particular, as the files are dropped?

  I got to meet ( Doc ID 1531031.1 ) which explains how to roll forward when a data file is added.

  If I follow the same steps, to make the move to restore the data file newly added, will it work in my case?

  Can someone please clarify?

  Thank you

  San

  I was wondering if reocover noredo is performed before restored controlfile, oracle will apply the incremental backup error-free files, and in this case, what would be the status of the data file in the control file.

  Why do you consider to retrieve the day before first and then in the restaurant of the controlfile will lead to problems. Please read my first post on this thread - I had clearly mentioned that you would not face problems if you go with the method of deployment.

  Here is a demo for you with force logging is disabled. For the first time the day before resuming and restored then the controlfile ensures:

  Primary: oraprim

  Standby: orastb

  Tablespace DataFile of MYTS is removed on primary:

  SYS @ oraprim > select force_logging in the database of v$.

  FORCE_LOGGING

  ---------------------------------------

  NO.

  Currently the tablespace is to have 2 data files.

  SYS @ oraprim > select file_name in dba_data_files where nom_tablespace = 'MYTS;

  FILE_NAME

  -------------------------------------------------------

  /U01/app/Oracle/oradata/oraprim/myts01.dbf

  /U01/app/Oracle/oradata/oraprim/myts02.dbf

  In standby mode, the tablespace is to have 2 data files:

  SYS @ orastb > select name from v$ datafile where ts #= 6;

  NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/oradata/orastb/myts01.dbf

  /U01/app/Oracle/oradata/orastb/myts02.dbf

  Postponement of the day before on the primary log shipping

  SYS @ oraprim > alter system set log_archive_dest_state_3 = delay;

  Modified system.

  Dropped 1 MYTS datafile on the primary.

  SYS @ oraprim > alter tablespace myts drop datafile ' / u01/app/oracle/oradata/oraprim/myts02.dbf';

  Tablespace altered.

  Removed some archives to create a space.

  [oracle@ora12c-1 2016_01_05] $ rm - rf * 31 *.

  [oracle@ora12c-1 2016_01_05] $ ls - lrt

  13696 total

  -rw - r - 1 oracle oinstall 10534400 5 January 18:46 o1_mf_1_302_c8qjl3t7_.arc

  -rw - r - 1 oracle oinstall 2714624 5 January 18:47 o1_mf_1_303_c8qjmhpq_.arc

  -rw - r - 1 oracle oinstall 526336 5 January 18:49 o1_mf_1_304_c8qjp7sb_.arc

  -rw - r - 1 oracle oinstall 23552 5 January 18:49 o1_mf_1_305_c8qjpsmh_.arc

  -rw - r - 1 oracle oinstall 53760 5 January 18:50 o1_mf_1_306_c8qjsfqo_.arc

  -rw - r - 1 oracle oinstall 14336 Jan 5 18:51 o1_mf_1_307_c8qjt9rh_.arc

  -rw - r - 1 oracle oinstall 1024 5 January 18:53 o1_mf_1_309_c8qjxt4z_.arc

  -rw - r - 1 oracle oinstall 110592 5 January 18:53 o1_mf_1_308_c8qjxt34_.arc

  [oracle@ora12c-1 2016_01_05] $

  Current main MYTS data files:

  SYS @ oraprim > select file_name in dba_data_files where nom_tablespace = 'MYTS;

  FILE_NAME

  -------------------------------------------------------

  /U01/app/Oracle/oradata/oraprim/myts01.dbf

  Current data of MYTS standby files:

  SYS @ orastb > select name from v$ datafile where ts #= 6;

  NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/oradata/orastb/myts01.dbf

  /U01/app/Oracle/oradata/orastb/myts02.dbf

  Gap is created:

  SYS @ orastb > select the process, status, sequence # v$ managed_standby;

  STATUS OF PROCESS SEQUENCE #.

  --------- ------------ ----------

  ARCH. CLOSING 319

  ARCH. CLOSING 311

  CONNECTED ARCH 0

  ARCH. CLOSING 310

  MRP0 WAIT_FOR_GAP 312

  RFS IDLE 0

  RFS IDLE 0

  RFS IDLE 0

  RFS IDLE 320

  9 selected lines.

  Backup incremental RMAN is taken elementary school.

  RMAN > incremental backup of the format of database of SNA 2686263 ' / u02/bkp/%d_inc_%U.bak';

  From backup 5 January 16

  using the control file of the target instead of recovery catalog database

  the DISC 2 channel configuration is ignored

  the DISC 3 channel configuration is ignored

  configuration for DISK 4 channel is ignored

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 41 type device = DISK

  channel ORA_DISK_1: starting full datafile from backup set

  channel ORA_DISK_1: specifying datafile (s) in the backup set

  Enter a number of file datafile = 00001 name=/u01/app/oracle/oradata/oraprim/system01.dbf

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/sysaux01.dbf 00003

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/undotbs01.dbf 00004

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/users01.dbf 00006

  Enter a number of file datafile = name=/u01/app/oracle/oradata/oraprim/myts01.dbf 00057

  channel ORA_DISK_1: starting total, 1-January 5, 16

  channel ORA_DISK_1: finished piece 1-January 5, 16

  piece handle=/u02/bkp/ORAPRIM_inc_42qqkmaq_1_1.bak tag = TAG20160105T190016 comment = NONE

  channel ORA_DISK_1: complete set of backups, time: 00:00:02

  Backup finished on 5 January 16

  Saved controlfile on primary:

  RMAN > backup current controlfile to Eve format ' / u02/bkp/ctl.ctl';

  Cancel recovery in standby mode:

  SYS @ orastb > alter database recover managed standby database cancel;

  Database altered.

  Recover the day before by using the above backup items

  RMAN > recover database noredo;

  From pick up to 5 January 16

  the DISC 2 channel configuration is ignored

  the DISC 3 channel configuration is ignored

  configuration for DISK 4 channel is ignored

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 26 type of device = DISK

  channel ORA_DISK_1: from additional data file from the restore backup set

  channel ORA_DISK_1: specifying datafile (s) to restore from backup set

  destination for the restoration of the data file 00001: /u01/app/oracle/oradata/orastb/system01.dbf

  destination for the restoration of the data file 00003: /u01/app/oracle/oradata/orastb/sysaux01.dbf

  destination for the restoration of the data file 00004: /u01/app/oracle/oradata/orastb/undotbs01.dbf

  destination for the restoration of the data file 00006: /u01/app/oracle/oradata/orastb/users01.dbf

  destination for the restoration of the data file 00057: /u01/app/oracle/oradata/orastb/myts01.dbf

  channel ORA_DISK_1: backup /u02/bkp/ORAPRIM_inc_3uqqkma0_1_1.bak piece reading

  channel ORA_DISK_1: room handle=/u02/bkp/ORAPRIM_inc_3uqqkma0_1_1.bak tag = TAG20160105T190016

  channel ORA_DISK_1: restored the backup part 1

  channel ORA_DISK_1: restore complete, duration: 00:00:01

  Finished recover to 5 January 16

  Restored the controlfile and mounted the day before:

  RMAN > shutdown immediate

  dismounted database

  Instance Oracle to close

  RMAN > startup nomount

  connected to the database target (not started)

  Oracle instance started

  Total System Global Area 939495424 bytes

  Bytes of size 2295080 fixed

  348130008 variable size bytes

  583008256 of database buffers bytes

  Redo buffers 6062080 bytes

  RMAN > restore controlfile eve of ' / u02/ctl.ctl ';

  From 5 January 16 restore

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 20 type of device = DISK

  channel ORA_DISK_1: restore the control file

  channel ORA_DISK_1: restore complete, duration: 00:00:01

  output file name=/u01/app/oracle/oradata/orastb/control01.ctl

  output file name=/u01/app/oracle/fast_recovery_area/orastb/control02.ctl

  Finished restore at 5 January 16

  RMAN > change the editing of the database;

  Statement processed

  output channel: ORA_DISK_1

  Now the data file does not exist on the standby mode:

  SYS @ orastb > alter database recover managed standby database disconnect;

  Database altered.

  SYS @ orastb > select the process, status, sequence # v$ managed_standby;

  STATUS OF PROCESS SEQUENCE #.

  --------- ------------ ----------

  CONNECTED ARCH 0

  CONNECTED ARCH 0

  CONNECTED ARCH 0

  ARCH. CLOSING 329

  RFS IDLE 0

  RFS IDLE 330

  RFS IDLE 0

  MRP0 APPLYING_LOG 330

  8 selected lines.

  SYS @ orastb > select name from v$ datafile where ts #= 6;

  NAME

  --------------------------------------------------------------------------------

  /U01/app/Oracle/oradata/orastb/myts01.dbf

  Hope that gives you a clear picture. You can use this to roll forward day before using the SNA roll forward Eve physical database using RMAN incremental backup | Shivananda Rao

  -Jonathan Rolland

• Photoshop cs6 shifts when creating new file

  When creating a file the program is lagging about 4 to 7 seconds, when I save the file and re - open, there is no lag, at the opening of the older files is no this lag as well. When looking at the CPU usage, it seems to choke when creating new files. Does anyone have the same problem? I've updated photoshop and all my drivers. My system below features:

  Windows 10

  I7 - 4790 k

  GTZ 780

  16 GB of ram

  OK, figured out, this is the plugin extensis font management, I update that I have to leave for now, but now the system is back and catchy as usual, thanks to all.

• ORA-01111 name for the 10 data file is unknown

  Hello
  I created two new areas of storage (11 and 12) with 1 data file in each of them in my primary database,
  I forgot to set the parameter in the server backup standby_file_management = AUTO,
  auto standby server to create tablespace data file in D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\UNNAMED00010 11,
  Although there is no "UNNAMED00010" in D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\ file.
  in the tablespace $ v and v$ datafile, I can see that the entry was created in the control to the standby server file.
  Here is the list of the data file in my backup server
  
  TS # name
  ----- --------------------------------------------------------
  G:\OFSDB\OFS4\ORADATA\OFS4\SYSTEM01 0. DBF
  1 G:\OFSDB\OFS4\ORADATA\OFS4\UNDOTBS01. DBF
  G:\OFSDB\OFS4\ORADATA\OFS4\SYSAUX01 2. DBF
  G:\OFSDB\OFS4\ORADATA\OFS4\USERS01 4. DBF
  6 G:\OFSDB\OFS4\ORADATA\OFS4\DATA_SE. ORA
  7 G:\OFSDB\OFS4\ORADATA\OFS4\INDEX_SE
  8 G:\OFSDB\OFS4\ORADATA\OFS4\FLOW_1.DBF
  G:\OFSDB\OFS4\ORADATA\OFS4\CJHIT01 9. DBF
  G:\OFSDB\OFS4\ORADATA\OFS4\DBMON_TS 10. DBF
  11 D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\UNNAMED00010
  
  Someone knows how to fix this problem?
  
  Thank you

  Another way try this,

  1 put the tablespace that holds the database without name begin backup mode.

  SQL > alter tablespace mytbs begin backup;

  2 copy the missing data (copy of the OS) file to the location of the files of pending data.

  3. run the end backup command.

  SQL > alter tablespace mytbs end backup;

  4. create a controlfile for the use of the database pending,

  SQL > alter database create standby controlfile as ' / D:/oracle/stdcontrol.ctl';

  5. move the alos for standby server.

  In the standby mode,

  1 cancel the recovery mode.
  2 stop and change the controlfile.
  3. start the day before db in the editing phase.
  4 restore database pending.

  Thank you

• Problems with duplicate DATA when the data file was added after the backup completes

  Hello
  
  I am facing a problem when running of duplicate database with the command of database duplicate RMAN on a 10 g database. If I have the duplication from a full backup that is missing a data file that has been added to the database after the full backup of preforms, I get the following error message:
  

  Starting restore at 10-10-2009 18:00:38
  
  released channel: t1
  released channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06100: no channel to restore a backup or copy of datafile 43

  Redo log which was Pond at the time of the creation of 43 of the data file is also available in the backups. It seems that RMAN cannot use the log information archived redo to restore the content of the data file 43. I guess that because failure is already reported in the RESTORATION and not in the RECOVERY phase, so again the archived logs are not available yet. I get the same message even if I do another backup of the data file 43 (so a backup that is not in the same backupset as the backup to all the other data files).
  The script, the command duplicate product, I guess that RMAN reads the contents of the source database controlfile and trying to get a backup that contains all the data files to restore the database Assistant - if such a backup is not found, it fails.
  
  
  Of course, if I try to perform a restore/recovery of the source database, it works without problem:
  

  RMAN> restore database;
  
  Starting restore at 13.10.09
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
  .....

  The 43 data file is re-created and then redo is applied to the course.
  
  So, does anyone know if the duplicate database can use archived redo logs to recreate the contents of a data file, as does a normal restore/recovery? If this is the case, then it is necessary to perform a full backup before each duplicated if a data file has been added after such a backup database.
  
  Thanks in advance for any answers.
  
  Kind regards
  Swear

  Hi swear,.

  I got exactly the same problem during replication.
  Because we backup archive logs every 6 hours with rman, I added an additional block of running this script.
  run
  {
  backup incremental level 0
  format "% d_ % s_ %%t p_ bk_ '.
  filesperset 4
  database not saved;
  }

  (I also hit a bug in the catalogue which was resolved by patching up the dbs catalog 11.1.0.6, 11.1.0.7 for.)

  This will restrict the data not making file not part of any backup rman 6 hours while jumping for which there is already a backup of data files.

  Kind regards

  Tycho

• problem when loading data file DB

  Hello
  
  I am new to ODI,
  
  I just do a test, loading DB data in the text file, I did encounter a problem,
  
  a DB table has two columns, ID and NAME,
  
  I created a text file "TEST.txt", as follows,
  ID NAME
  2B
  
  I created a logical and physical structure in the topology, and created, last model creates the interface, selected 'LKM SQL SQL' and 'IKM SQL incremental update.
  
  Then run the interface, it had mistakes, said 7000: null: java.sql.SQLException: ODI-40475: invalid column: C1_ID',.
  
  I found it will remove the 'TEST.txt', and recreated, but column names have been changed, C1_ID, C2_NAME, IKE
  
  If so, how can I load table DB file with success and the name of the columns in the DB table were the same as the name of the columns in the file.
  
  Thank you!

  Hope you have selected "Different from the target of the staging area" and set it to any schema RDBMS?

• VI Initialize with OptionsString missing the resource name field when creating the IVI Driver Generator LabView 8.6

  Hello world

  We have just uploaded the latest LabView version 8.6 and there is a nice tool called generator of LabView LabWindows CVI Instruments drivers. Our driver of the instrument is an IVI driver that has a LabWindows CVI interface that uses the generation of LabView tool to create all the VI that could be used to talk to the underlying driver IVI hollow discovery of .fp, .sub and .h files. No mistake and screws more than 30 are generated automatically.

  There is an inconsistency in the Initialize function IVI driver. There is a VI Initialize driver without an input of OptionString parameter and there is a second VI with the OptionString parameter.

  Two of these screws should have a required entry field that is the ResourceName of the instrument, but this field is visible in the initialization of VI that has no OptionString input parameter and is not at all visible in other VI initialize that has an OptionString input parameter

  No idea why the second version of Initialize does not display the ResourceName parameter?

  Thank you

  Sorin

  Hey Sorin and Heather,

  I've just built your IVI driver and can see the question you come through.  What version of LabVIEW and the tool are you using?  I am looking into this further for trying to dig your problem a little more.   If you add the connector to the connector pane, the created VI meets the needs that the name of the resource exists, it's just not in the connector pane.  This can do a right-click on the icon in the upper right of the front panel and selecting display connector.  Select where on the VI wish you add the connector, and then select the name of the resource.

• Remove the file name characters when exporting to file

  Hi all

  I worked with Silly-V , which has been extremely useful in creating a script to automate creating files in Illustrator.

  What I need help with now is the ability to add in this script, the ability to remove "x #" character of a filename on export. This would be ideal, as it will completely automate what I did by hand for months.

  The current script, that we have put in place takes generally, which would take me about 1 minute per file and it has reduced to 10 seconds. Translate this in the whole of the need to treat roughly 800-1 000 files, and you can see where the time invested is decreased significantly.

  The last piece of the puzzle is the removal of characters from ONE of the two files that are created through this script.

  First of all, this is the current script. It seems to work perfectly for what I ask it to do.

  #target illustrator-19  
  function test(){  
    
    
    var folder_1 = Folder("~/Desktop/Header CAD");  
    var folder_2 = Folder("~/Desktop/Clean CAD");  
      
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;  
      
    function revealAllLayers(doc) {    
        for (var i = doc.layers.length - 1; i >= 0; i--) {    
            doc.layers[i].visible = true;    
        }    
    };    
    
    
    
    
    function hideLayer(doc, name) {    
        doc.layers.getByName(name).visible = false;    
    };    
    
    
    
    
    function exportMyPng(dest, doc, props) {    
        if(props.hasOwnProperty("antiAliasing")){    
          switch(props.antiAliasing){    
            case "ARTOPTIMIZED" : {    
                app.preferences.setIntegerPreference("plugin/PNGFileFormat/AntiAlias", 1);    
                break;      
            }    
            default : {    
                break;    
            }    
          }    
        }    
        var pngOpts = new ImageCaptureOptions();   
        pngOpts.antiAliasing = true;   
        for (var all in props) {    
            if (pngOpts.hasOwnProperty(all) && all != "antiAliasing") {    
                pngOpts[all] = props[all];    
            }    
        }    
        doc.imageCapture(File(dest + "/" + doc.name.replace(/\.\w+$/, props.extraStuff + ".png")), doc.visibleBounds, pngOpts);    
    };    
    
    
    
    
    var doc = app.activeDocument;    
    revealAllLayers(doc);    
    hideLayer(doc, "Materials");    
    hideLayer(doc, "Detail Artwork");    
    exportMyPng(folder_1, doc, {    
        transparency: false,    
        antiAliasing: "ARTOPTIMIZED",    
        resolution: 300,    
        extraStuff: "_header"
    });    
    
    
  
  
      
    hideLayer(doc, "Header");    
    exportMyPng(folder_2, doc, {    
        transparency: false,    
        antiAliasing: "ARTOPTIMIZED",    
        resolution: 300,    
        extraStuff: ""
    });    
    
    
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);  
    
    
  };       
  test(); 
  
  test(); 
  

  I found the program Name Mangler done an exceptional job of the completion of the task of renaming. Here's a screenshot of what I'm asking for looks like with this program.

  

  My ultimate goal is to be able to integrate this unique Name Mangler feature the existing script I posted above. Now, the problem is that I need ONLY to assign the file created by the section of the lines 66-71. As you can see, I need to remove the file name starting at the index of 14 characters.

  Is it possible and something that anyone can help with?

  Thank you in advance!

  Brooks

  Whew busy days!

  Well, I got this here:

  #target illustrator
  function test(){   
  
    var folder_1 = Folder("~/Desktop/Header CAD");
    var folder_2 = Folder("~/Desktop/Clean CAD");   
  
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;   
  
    function revealAllLayers(doc) {
        for (var i = doc.layers.length - 1; i >= 0; i--) {
            doc.layers[i].visible = true;
        }
    };     
  
    function hideLayer(doc, name) {
        doc.layers.getByName(name).visible = false;
    };     
  
    function exportMyPng(dest, doc, props) {
        if(props.hasOwnProperty("antiAliasing")){
          switch(props.antiAliasing){
            case "ARTOPTIMIZED" : {
                app.preferences.setIntegerPreference("plugin/PNGFileFormat/AntiAlias", 1);
                break;
            }
            default : {
                break;
            }
          }
        }
        var pngOpts = new ImageCaptureOptions();
        pngOpts.antiAliasing = true;
        for (var all in props) {
            if (pngOpts.hasOwnProperty(all) && all != "antiAliasing") {
                pngOpts[all] = props[all];
            }
        }
        doc.imageCapture(File(dest + "/" + doc.name.replace(/\.\w+$/, props.extraStuff + ".png").substr(props.charsOffStart)), doc.visibleBounds, pngOpts);
    };     
  
    var doc = app.activeDocument;
    revealAllLayers(doc);
    hideLayer(doc, "Materials");
    hideLayer(doc, "Detail Artwork");
    exportMyPng(folder_1, doc, {
        transparency: false,
        antiAliasing: "ARTOPTIMIZED",
        resolution: 300,
        extraStuff: "_header",
        charsOffStart: 0
    });     
  
    hideLayer(doc, "Header");
    exportMyPng(folder_2, doc, {
        transparency: false,
        antiAliasing: "ARTOPTIMIZED",
        resolution: 300,
        extraStuff: "",
        charsOffStart: 14
    });
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);   
  
  };
  test();
  

  This one has a new parameter "charsOffStart" that you have to stick in your two-functions for the economy, and it will be lop however much from character now!

• remove the new HBA analysis when creating data warehouses?

  I created a script to create multiple data warehouses (100 +), but notices after each one is created, it triggers a new analysis of all the HBAS the LUNS is announced to the.

  It is; This new analysis can hold until all data stores have been created, then just scan once at the end?

  example line of code to the ctreation store:

  < New-store data-server vcenter - VMHost esx.domain.com - name san-lun-01-path naa.xxxxxxxxxxxxxxxxxxxxxxxx - Vmfs - BlockSizeMB 4 >

  Thanks a bunch for all help!

  The new analysis is actually performed by vCenter, you could follow Duncans post for this disable manually or you can add a line to your script that adds the parameter disable the Rescan and then change it back after...

  http://www.yellow-bricks.com/2009/08/04/automatic-rescan-of-your-HBAs/

• Can't see the logical volume when creating data store - vSphere 4.1

  Hi guys, got another problem with ESXi 4.1 on a HP Proliant ML350 G6.

  ESXi 4.1 update 1 has been installed successfully on the server on an internal USB. Our next step is to create a store of data through the vSphere client.

  The server has five 500 GB SAS configured in a RAID 5 array drives. The server has a HP Smart Array P410i RAID controller. I see five physical disks and logical volume of about 2.3 TB in RAID Utility. However, when access us the hypervisor via the vSphere client and try to create a data via a storage LUN/local store, the display shows then no logical volumes or the drive bays on which to create a data store.

  We are usnure why this is, as the ESXi 4.1 installation program could see this logical volume when I was installing the hypervisor, but he does not appear in vSphere for use in a data store.

  If anyone can help?

  Thank you very much.

  Each disk must be less than 2 TB - 512b

• Missing page layouts when creating new file

  Hi all

  I use the current version of the DreamWeaver CC. When I go to File > New > blank Page > HTML, I see only two layouts in the layout box:

  • 2 fixed columns, sidebar, header and footer right
  • 3 fixed columns, header and footer

  Help of DreamWeaver (http://helpx.adobe.com/dreamweaver/using/css-layouts.html) says "you can choose from 16 different layouts."

  Does anyone have an idea on what has happened to the other page layouts?

  Thank you

  Douglas

  CC is HTML5-centric now if only 2 page layouts are available.  Previous versions of DW had more options but these page content layouts code which is considered by many to be obsolete by today's standards.

  If you need more options, check out FluidGrid Layouts. Or simply change the pixels to % CSS widths in 2 layouts provided.

  In addition to creating your own layouts, customized with CSS Designer, you might jumpt start your projects with one of these popular frameworks:

  Zurb Foundation

  http://Foundation.ZURB.com/templates.php

  Reusable skeleton

  http://www.getskeleton.com/

  Initializr (HTML5 Boilerplate, sensitive or "bootstrap")

  http://www.Initializr.com/

  Bootstrap DMX area * free extension for DW *.

  http://www.DMXzone.com/go/21759/DMXzone-bootstrap/

  Project of seven Page Packs * commercial CSS Templates *.

  http://www.Projectseven.com/products/templates/index.htm

  Nancy O.

• How can I create the page sizes personalised in InDesign when creating postscript files?

  Greetings ~ I have Mac OS X 10.8. How can I create sizes of custom page from InDesign when you create a post script file? Do I need a virtual printer?

  Is there a reason that you are not exporting to PDF directly from InDesign?

• Error when creating portfolio files

  Hello
  
  Get below error during the creation of portfolio files using Oracle
  Portfolio Manager.
  In R12, the patch PCI included and installed by default.
  But encryption is disabled by default, please let me know what are
  measures should be taken to do this.
  
  Of after a metalink note portfolio must be created, then try to run
  OWM
  [clean applmgr@ebs]$
  

  DISPLAY environment variable not set!
  Oracle Wallet Manager is an interface graphic tool that
  requires the SCREEN to specify a location
  where the GUI tools can display.
  The export DISPLAY value, then run again...

  How can I fix this... Please give me the steps...
  IM using the R12.0.0.0 application,
  Database 10.2.0.2.0.
  OS: linux redhat 4.0
  
  Thank you
  Verhasselt

  Hi Verhasselt;

  What is back as root: echo $DISPLAY

  If it's not any return value of tracking below, please

  If you are working on the server issue:
  as root:
  xhost +.

  If you work on that issue telnet program:

  as root:
  Export DISPLAY = Ip or Hostnam:1.0
  xhost +.

  Su-user
  try to run again

  When you run you need vncviwer to get the screen on your computer

  Respect of
  HELIOS

• Synchronize the names wrong gets to delete files remotely

  Synchronize has a checkbox option "delete files remotely not on the local server", but this won't work for me.
  
  Sync overview lists the correct files, EXCEPT the first letter of each file name or folder is missing. For example, "index2.html" is indicated as "ndex2.html".
  
  because of this bug, none of the files are deleted from the server. (DW CS3, all the updates applied, Mactel 10.5.2)
  
  I'm surprised that I don't see that this problem reported elsewhere... so maybe there are some settings that making ruin for me?
  
  Downloads work fine. Do not know download - not yet tested.
  
  Any ideas?
  
  Thank you
  Karl
  
  

  I had the same problem and found a solution. In the "host directory"field of the setup of the Site Info to the definition/Remote, which was initially empty, I entered"... /" (without the quotes). That solved the problem. I tried to change it back a couple of times and verified than just that one change caused the "remove Synchronize missing first letter bug" to come and go.

  The idea that the problem had something to do with the host directory entry came after an assignment 'Big Frank' 2002 (link below) in which he solved his problem by removing one / of the same box. In my case, the bug appeared when I switched to using a main FTP account that had access to a lot of Web sites on the same server, to a sub - FTP account that could only access the folder associated with a Web site. Sync perfectly worked when I used the main FTP account and was something like /mydomain.com/ in the directory of the host area, but when I went to the sub - FTP account and allowed the host directory entry, the bug to remove Sync appeared.

  I have no idea why the... / is necessary, or why it even works. It kinda a strange looking remote display to see the root appearing directory as "/... /". "." But it works.

  I found a bunch of messages showing that Dreamweaver users have suffered from this bug since at least 2002 in several versions of the software. Adobe - it is high time to address them.

  BTW... under way to test this, at some point I just put a ' / ' in the host directory field. It does not solve the original problem, and it introduced a strange new in which Dreamweaver wanted to remove some folders on the server that have been "hidden". Very strange.

  Here is a link to "Big Frank" post:

  http://groups.Google.com/group/Macromedia.Dreamweaver/browse_thread/thread/3ec43202212a438 1/f0d85f022db158af