ORA-01111 name for the 10 data file is unknown

Similar Questions

• Alert entered for the missing data file

  I'm trying a simple payback scenario: remove a data file to a tablespace that is normal when the database is running, and the data file has been saved.
  
  Before, the control point ends normally (I guess that still retains the file inode handle Oracle). When I choose to dba_data_files, the error occurred:
  

  SQL> alter system checkpoint;
  
  System altered.
  
  SQL> select count(*) from dba_data_files;
  select count(*) from dba_data_files
                       *
  ERROR at line 1:
  ORA-01116: error in opening database file 10
  ORA-01110: data file 10: '/u01/oradata/data01.dbf'
  ORA-27041: unable to open file
  Linux Error: 2: No such file or directory
  Additional information: 3

  To my surprise, nothing has been recorded in the alerts log. And no trace of the files not generated in udump. And Oracle has refused to restore the data file when he was running.
  
  The message appeared in the journal of alerts when trying to stop the database. After abort shutdown (Oracle refused to stop immediately) and restart the instance, I was able to restore and recover the data file.
  
  This is the expected behavior? If so, how you would detect files of missing when db is running?
  
  
  Oracle: 9.2.0.6, OS: RHEL3

  1. it has not detected by the control point caused by a switch logfile because the file is not actually missing. Like other - inded you! -have, Unix/Linux, you can remove a file at any time, but if the file is in use, the inodes are allocated and the process using it continues to see it very well because it. Because, at the level of the inode, it IS absolutely still there! Either by the way, it is needless to say to make a logfile switch, because as data files are concerned, which does nothing, that the command of alter system checkpoint that you already tried.

  I used to do demos of how to recover from the complete loss of a controlfile in Oracle University classes: I would like to make a burst of rm *.ctl commands and then significantly question the command checkpoint... and nothing happened. Very demoralizing the first time I did it. Deliver a force of startup, however here the inodes are released at that time, files are actually deleted and start falls in nomount State. Bouncing the instance was the only way I could get the data base to protest against the removal of a data file, too.

  2. No, if a file has disappeared in a way allowing to detect Oracle, it wouldn't matter if the folder was empty because he's worried the presence/absence of the datafile headers. They need to be updated, even if nothing else does.

  3. it would be in the alerts log if SMON has detected the lost file at startup (one of his jobs is, explicitly, to verify the existence of all the files mentioned in the control file). CKPT would not trigger an alert, because concerned, all right. Inodes are still held, after all. Your attempts to create tables and so forth inside the lost file do not generate display errors (I think) at this time, it's your server process that seeks to do things for the file, not CKPT or pre-existing other background process, constantly running.

  4. it's specific to Unix, anyway, that Linux is a Variant.

• File name of the exported data/pdf control

  I have the LiveCycle Forms that internal auditors use to record their findings of the audit. These forms will be used by many different and subject to quality through a Submit by email button. Is there a way to control the name of the exported data file.

  For example: the first form control number is APL-11-001. Is it possible to include this information in the name of the exported file? Ideal would be to include the date of completion of verification the user selected in the form and their surname (family name is a separate textfield of their name on the form).

  Thank you

  Hello

  You can, but not without a bit of extras script AND a large number of maintenance issues.

  Take a look at this long thread (with examples): http://forums.adobe.com/message/3126855#3126855.

  This is considered a security concern by Adobe and is limited. You must have a JavaScript file to the folder level in a game on the computer of EACH user folder using the form.

  Good luck

  Niall

• ORA-01103: the 'RAC' name in the database control file is not "STB".

  HIII..,.
  
  Im doing my dataguard, my primary side installation is a RAC 2node and Eve is a single node. IM using Database 11 GR 2.
  
  when im using the RMan command for duplication of data im getting the following error.
  
  
  
  SQL statement: alter database mount rescue
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 03/10/2011 18:33:58
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the sql command on the channel clone_default at 03/10/2011 18:33:58
  RMAN-11003: failure during parsing / execution of the SQL statement: alter database mount rescue
  ORA-01103: the 'RAC' name in the database control file is not "STB".
  
  
  Please can someone help me to solve the issue. ??
  
  Thanks in advance...

  Hello

  (1) If you use "DORECOVER" while cloning, please remove it.
  (2) its still not, simply set the FRA and IE

  ALTER system set DB_RECOVERY_FILE_DEST = '+ DATA ';
  ALTER system set db_recovery_file_dest_size = 2GB;

  Note: Set it to primary and standby

  Clone of the DB.

  It works perfectly now, and once Reset original value if you do not want it.

  Happy cloning :)

  Kind regards
  Rakesh

• How to integrate my name in the EXIF data for multiple image at the time Bridge CS3

  I tried to figure out how to do it for a while and just can't figure out how to get my the first two images and JPEG to show my name in the EXIF of the right of author or author entry when you enter in the dialog box "File Info" box so that it displays high display EXIF data using EXIF Viewer or in Bridge CS3.

  Can I get help on this? Point me to a tutorial or something?

  I already read bridge help and it is written in such a way that is not very clear to me on how to do it.

  Thank you for your help on this.

  Don't know what you mean with the get info part, but you can make a model

  for metadata, you want to appear in all the files.

  In the metadata high Panel on the right is a small triangle that if you click on it

  Displays a context menu. Inherent choose Create a metadata template. Fill it out

  desired fields and save it as a proper name.

  The model now shows in the submenu even as above as a submenu with append

  or replace the metadata model.

  If you select al files and use the model metadata to add all the files

  you will get your author about this model. Beware that the addition of this model

  some info in other areas or keywords can disappear. Just do a

  test on some files that you already have a return to the top of.

  Using the Adobe Photodownloader within Bridge you have the option of

  Add this template in the files when you download them from the card reader,

  see Advanced options for this.

  show my name in the EXIF data of the right of author or author entry when you enter it in the

  'Get Info' dialog box

• RMAN duplicate for standby the active database and the missing data files

  We have a car of 2 node ASM 11 GR 2 and 11.1 of database and a standby with ASM also. Our database is relatively low (300 GB)

  and in one recent event the day before was such a departure from the primary that we decided to "repopulate" the data using duplicate RMAN.

  I deleted the data files of the previous day and followed the Oracle documentation to duplicate a database. In the waiting

  I created a static listener and a pfile containing only the essential information (db_unique_name). I started the day before with nomount using the 'empty' pfile.

  I run RMAN, connected to the target and ancillary catalogues and run this command:

  run {
  allocate channel prmy1 type disk;
  allocate channel prmy2 type disk;
  allocate channel prmy3 type disk;
  allocate channel prmy4 type disk;
  allocate channel prmy5 type disk;
  allocate auxiliary channel stby1 type disk;
  duplicate target database for standby from active database nofilenamecheck;
  }
  

  RMAN duplication completed without errors, so I started the rescue database and got

  an error saying that datafile XXX is missing. I checked XXX datafile at the primary level

  and it is in a DISCONNECTED state. In the standby database the same data file is in the online state.

  So I think the problem is that during the duplication, RMAN (as documentation States) does not work

  Copy the files of data in offline mode, but the standby control file seem to think that these data files

  are online and should be present.

  Can someone please help me solve this problem? From my understanding, I could just copy the missing persons

  data files (there are many however) and in the standby go offline, but I don't think it's

  the right solution, edit this file for control of the standby? I would add another option

  in the RMAN script?

  Take the data file in offline mode on the site of the previous day.

  I don't think that two COPIES try to manage separately offline files.

  Hemant K Collette

• Sizes of Splash screen and names for the iPhone 6 and 6 more in the file descriptor xml files

  Is anyone know the sizes of screen and the file names for the iPhone 6 and 6 more (for the descriptor xml file)? Or current splash screens works on both devices?

  i.e. Default-Portrait.png *-768w x 1024 h

  Hello

  Here is the specification.

  iPhone 6	Start screen	750 x 1334	72	[email protected]	Resources or resources/iphone
  iPhone 6 more landscape	Start screen	2208 x 1242	72	[email protected]	Resources or resources/iphone
  iPhone 6 Plus portrait	Start screen	1242 x 2208	72	[email protected]	Resources or resources/iphone

  You can find more info here - http://docs.appcelerator.com/titanium/3.0/#! / guide/Icons_and_Splash_Screens-section-290048 97_IconsandSplashScreens-Splashscreens

• put the offline data file when the database is in NOARCHIVELOG mode

  My question is when the database is in log mode Archive No. I am not able to take the database offline.

  When I tried in my computer I noticed set-aside.

  CASES1:

  SYS > alter database datafile 5 offline;

  ERROR at line 1;

  ORA-01145: offline immediately rejected at least media recovery enabled.

  case 2:

  SYS > alter database datafile 5 immediate offline;

  ERROR at line 1;

  ORA - 00933:SQL not correctly completed order

  CASE3:

  I tried the command drop alter database datafile offline 6; (in NOARCHIVELOG mode) and it is to show the same effect that alter database datafile offline 6; (in ARCHIVELOG mode).
  

  * In NOARCHIVELOG mode are we really drop the data file to use the offline data file? You please tell me the effect of the dropkeyword.

  Oracle protects you. Please review ARCHIVELOG and NOARCHIVELOG mode.

  When you take the database offline in NOARCHIVELOG mode:

  (1) the file is offline

  (2) the RCS in which you took the database offline will be is more to be in the online redo logs

  (3) at this point, you need to perform a media recovery to enable again the file online (ie. restore the database)

  So you can see why you shouldn't do that.

  The DROP Offline command does not actually remove the data file. It removes the control file file details and updates the offline data file. It can be used for purposes of recovery or when you actually plan on deleting data files.

• How can I change the looks of Access Infrastructure Web location for the virtual machine files?

  How can I change the looks of Access Infrastructure Web location for the virtual machine files?

  My default is set to MACHINES C:\VIRTUAL.  But I want to change it to turn to an external drive connected with an eSata cable. Can I do this?

  Hello

  Add just like a new data store.

  Login to your web access, select your host (not the virtual machines) in the left menu.

  You should see a link on the right side with "Add data store", give it a name of store and add the directory.

  Now, you can add a virtual machine to this place.

  Good luck!

  --

  Wil

  _____________________________________________________

  Visit VMware developers at http://www.vi-toolkit.com wiki

• Cannot start db > ORA-09925: cannot create the audit trail file

  version 10.1.0.5.0
  AIX 3 5 00C9CEA04C00 dcxnim01
  
  When I'm trying to start db, getting this message any idea?
  
  SQL > connect virtue sysdba;
  ERROR:
  ORA-09925: cannot create the audit trail file
  IBM AIX RISC System/6000 error: 89: invalid file system control data detected
  Additional information: 9925
  ORA-09925: cannot create the audit trail file
  IBM AIX RISC System/6000 error: 89: invalid file system control data detected
  Additional information: 9925
  
  
  Here's the tail of the log of alerts
  
  3 Private_strands to the log command
  Thread 1 Advanced for you connect to sequence 3923
  Currently journal # 1, seq # 3923 mem # 0: /db01/oradata/ldapdcx1/ldapdcx1/redo01.log
  Fri 6 Aug 16:48:34 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_j001_991348.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  Fri 6 Aug 16:48:35 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_mmnl_508106.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  Fri 6 Aug 16:48:38 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_ckpt_839714.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  ORA-27072: IO file error
  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information: 9
  Additional information: 3
  Fri 6 Aug 16:48:38 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_lgwr_905470.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  ORA-27063: number of bytes read or written is incorrect
  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information:-1
  Additional information: 1024
  Fri 6 Aug 16:49:07 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_pmon_848078.trc file:
  ORA-00470: LGWR process ended with the error

  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information:-1

  Problem of the OS.
  What is the problem at the level of the BONE with the disc?

  unpacking of tail - 100

• Not able to start agent cache for the requested data store

  Hello
  
  This is my first attempt in TimesTen. I am running TimesTen on the same host Linux (RHES 5.2) running Oracle 11 g R2. TimesTen version is:
  
  TimesTen Release 11.2.1.4.0
  
  
  Trying to create a simple cache.
  
  The DSN entry section for ttdemo1 to. odbc.ini is as follows:
  
  + [ttdemo1] +.
  Driver=/home/Oracle/TimesTen/TimesTen/lib/libtten.so
  Data store = / work/oracle/TimesTen_store/ttdemo1
  PermSize = 128
  TempSize = 128
  UID = hr
  OracleId = MYDB
  DatabaseCharacterSet = WE8MSWIN1252
  ConnectionCharacterSet = WE8MSWIN1252
  
  With the help of ttisql I connect
  
  Command > Connect "dsn = ttdemo1; pwd = oracle; oraclepwd = oracle;
  Successful login: DSN = ttdemo1; UID = hr; DataStore = / work/oracle/TimesTen_store/ttdemo1; DatabaseCharacterSet = WE8MSWIN1252; ConnectionCharacterSet=WE8MSWIN1252;DRIVER=/home/oracle/TimesTen/timesten/lib/libtten.so;OracleId=MYDB; PermSize = 128; TempSize = 128; TypeMode = 0; OracleNetServiceName = MYDB;
  (Default AutoCommit = 1).
  Command > call ttcacheuidpwdset ('ttsys', 'oracle');
  Command > call ttcachestart;
  * 10024: could not start agent cache for the requested data store. Could not initialize Handle.* Oracle environment
  The command failed.
  
  The following text appears in the tterrors.log:
  
  15:41:21.82 Err: ORA: 9143: ora-9143 - 1252549744-xxagent03356: database: TTDEMO1 OCIEnvCreate failed. Return - 1 code
  15:41:21.82 Err: 7140: oraagent says it failed to start: could not initialize manage Oracle environment.
  15:41:22.36 Err: 7140: TT14004: failed to create the demon TimesTen: couldn't reproduce oraagent for "/ work/oracle/TimesTen_store/ttdemo1 ': has not been initialized Handl Oracle environment
  
  What are the reasons that the demon cannot happen again to another agent? FYI, the environment variables are defined as:
  
  ORA_NLS33=/U01/app/Oracle/product/11.2.0/Db_1/ocommon/NLS/Admin/data
  ANT_HOME = / home/oracle/TimesTen/ttdemo1/3rdparty/ant
  CLASSPATH=/home/oracle/TimesTen/ttdemo1/lib/ttjdbc5.jar:/home/oracle/TimesTen/ttdemo1/lib/orai18n.jar:/home/oracle/TimesTen/ttdemo1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/ttdemo1/3rdparty/jms1.1/lib/jms.jar:.
  Oracle@rhes5:/Home/Oracle/TimesTen/ttdemo1/info% echo $LD_LIBRARY_PATH
  /home/oracle/TimesTen/ttdemo1/lib:/home/oracle/TimesTen/ttdemo1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
  
  
  See you soon

  I see no problem here. The ENOENTs are superfluous because it locates libtten here:

  23302 open ("/ home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/libtten.so", O_RDONLY) = 3

  without doubt, it does the same thing trying to find the libttco.so?

  23302 open ("/ home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1/libttco.so", O_RDONLY) =-1 ENOENT (no such file or directory)

  Thank you for taking the trace. I really want to have a look at the complete file if you can send it to me?

• create an exception in avast for the nsemail.html file in the temp folder

  I was pulling out my hair trying to find if there could be anything in the temporary files that I have to keep the last few weeks. Then I came across this: "the release of Avast 10.3.2223 (we think it's this version) has resulted in questions with avasts prevention of Thunderbird.
  to function properly. The solution seems to be to create an exception in avast for the nsemail.html file in your
  computers temp folder. "So now I'm completely confused. Why would I put something I need all the time in a temporary file to have remove for cleaning ccleaner?

  Matt, thanks. I read your blog post. I need to replace my HD and I've been fretting over if I have to loose important data from the temporary files. Apparently not. When I talked about ccleaner, it was in the generic sense. I avoided ccleaner because I thought it was a big hammer and some data that he brags about getting rid of I really want to continue. I know that I can choose what remains and what is happening, I'll have to give him another look. Once again thank you.

• 3524 office: Change name for the scans

  Somewhere in the past I changed name genric for scans of scan000X to a name, I prefer not to use it anymore. But I probably did before moving to Windows 10, because I knew where he change in Windows 7 (and earlier versions). How can I change the generic name for the (still) scans in Windows 10?

  Hello

  Thank you for using the HP forum.

  1. Firstly, you must ensure that you have your software FULL of features installed.

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3520-e-all-in-one-printer-series/5162504/model/5241256#Z7_3054ICK0K8UDA0AQC11TA930O2

  2. open the HP printer Assistant

  3. go to scan a Document

  4. go into 'advanced settings '.

  6. go to 'File' (or Destination)

  There should be an option to change the generic name.

  Hope that helps!

• Cannot find the locale data files. Please reinstall

  I had a problem with Google Chrome, so I uninstalled via the control panel. I then reinstalled and I have this problem. I always present in my programs in the watched folder, but when I select to demolished, he said ' wait until the current program has finished install or changing.» I have no other program install or change. If I try to open Google, anywhere Progams, taskbar, all programs or directly from the .exe LocalApps it gives me the "could not find the locale data files. Please reinstall.

  I found the answer to my question. It seems that you can build processes, I don't understand why. For example I had a problem with my windows Explorer crashing. I disabled all the startup process of msconfig.

  In my view, there must be something in there that closes a completed process.
  Then I had, unknown to me, when I posted this problem, six or seven cases Google chrome showing the the Task Manager process tab. When I quit all instances of Google, I was able to finish the removal process and re - install Google Chrome.
  I just checked right now and I have six Google shown 3 rundll32.exe and two taskeng.exe bodies. I've never seen no more than one instance of anything in this tab before today.
  Disabling all startup stuff does not solve my problem to explore some way so I'll allow them once again.
  Thank you for helping me and I hope that someone can get useful information from my travels.

• How to install the large data file?

  Anyone know how I can install large binary data to BlackBerry files during the installation of an application?

  My application needs a size of 8 MB of the data file.

  I tried to add the file in my BlackBerry project in the Eclipse environment.

  But the compiler could not generate an executable file with the following message.

  «Unrecoverable internal error: java.lang.NullPointerException.» CAP run for the project xxxx»

  So, I tested with a small binary file. This time, the compiler generated a cod file. but the javaloader to load the application with this message.

  "Error: file is not a valid Java code file.

  When I tried with a small plus, we managed to load, but I failed to run the program with that.

  "Error at startup xxx: Module 'xxx' has verification error at offset 42b 5 (codfile version 78) 3135.

  Is it possible to include large binary data files in the cod file?

  And what is the best practice to deal with such a large data files?

  I hope to get a useful answer to my question.

  Thanks in advance for your answer.

  Kim.

  I finally managed to include the large data file in library projects.

  I have divided the data file in 2 separate files and then each file added to library projects.

  Each project the library has about 4 MB of the data file.

  So I have to install 3 .cod files.

  But in any case, it works fine. And I think that there will not be any problem because I use library projects only the first time.

  Peter, thank you very much for your support...

  Kim