Always at LUN poster

Hi guys,.

I have a cluster of ESX 3.5 U2 with a CX320 Clarrion FC node three as shared storage.

Each host has installed and registered with the San navisphere agent.

We were reconfiguring some of our storage. Throughout the process, we have removed VMFS applicable, re-read all the hosts in cluster volumes so that they could all see the same image of the SAN, and then removed the LUN of the ESX storage without problem group. I noticed that a LUN is still displayed in the list of targets for all hosts in the cluster.

I reread the hosts but this LUN still shows as a target. When I run esxcfg-mpath - l, it is not listed as a LUN present.

I haven't restarted all hosts yet, but I was wondering if anyone has experienced the same problem.

Thanks in advance

DC

Do you not detached from the host to storage while still in the cluster group, a new analysis and adding clustered, scan will cause to new anyissues with storage being introduced to guests?

But you cannot delete LUNZ.

How to remove it. What type of storage do you have?

André

* If you found this device or any other answer useful please consider awarding points for correct or helpful answers

Tags: VMware

Similar Questions

  • Can I save the Organizer, move my photos and always access to post-secondary studies?

    I backed up my catalog to an external hard drive last night and there were about 20 disconnected files.  I wasn't able to locate so I allowed the back upward to continue without them.  Do you know what are the consequences for that?

    In addition, many of my pictures are on my C drive, and several are on the external hard drive.  My catalogue included photos of these two places. When I move the rest of my photos from the C drive of my computer to the external hard drive, the catalogue will always be able to access or will I have to backup everything again?

    My goal is to free up space on my computer, so PSE will stop freezing.  I am interested in fact at this moment can enter all my photos in the organizer and labeled.  I'll change them later I have started creating digital scrapbook pages.

    Can someone tell me if how I go about this is correct?

    Thank you

    Thanks Ken.  I have supported all my external hard drive, but now I think I rather just move everything there and reminds me of my photos of the HD post to free up space on my C drive.  Is this possible?

    Date: Wednesday, February 22, 2012 15:55:14-0700

    From: [email protected]

    To: [email protected]

    Topic: Can I save the Organizer, move my photos and always access to post-secondary studies?

    Re: Can I save the Organizer, move my photos and always access to post-secondary studies?

    created by photodrawken in Photoshop Elements - discover complete discussion

    PSE allows you to back up your catalog, actual photos as well as the catalog (database) is saved. When you restore from a backup, you can specify where inbound pictures will be placed. Ken

    Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/4223403#4223403

    To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/4223403#4223403. In the Actions box to the right, click on stop Notifications by e-mail.

    Start a new discussion in Photoshop Elements, by e-mail, or to the Adobe Forums

    For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • e-mail message opens always mode full screen

    I use OS X Yosemite in a big iMac. My OS X mail after upgrade to Yosemite, now always opens my posts in full screen. It is very embarrassing and difficult to read and write because of the size of the screen. I'm not using the full screen as shown in the view menu. Answering machine to another similar to users with Maverick problem suggests to hit the OPTION, command + F, but that does not answer for me.

    Thanks for any help.

    Terri

    the green button full screen, hold down the option key and click.  This allows the application fill the entire screen (not the same full screen)

    You can enter any corner of the APP a sliding window size that suits your needs.

  • F10 - always "busy".

    If logged in as an administrator, my F10 always too busy poster - i.e. the cursor always shows like "hourglass." Insofar as I can see, there is no additional running tasks. I can continue to work and to select various options but have a problem when opening a list (for example by selecting "Start"), as it shows on the screen for a few seconds, then disappears. Very frustrating.
    Everyone knows similar? Any ideas on what can happen?

    Hello

    Have you tried to recover the operating system?
    In my opinion if you n t find any virus or spyware, you must reinstall the system with the supplied restore CD. On the second way, you can also try to use the system to Windws restore tool. You will find this utility under: Programs Accessories System Tools.

    Good luck

    Good bye

  • I lost my google search bar; He of always on by default, but disappeared from the homepage

    I chose Google as the default search, and showed a little search bar in the menu bar on the top of the homepage... I accidentally clicked something and he disappeared... I can't figure out how to restore.  It is always the default poster, but he's not here, or he's hiding?

    Hello

    Try this

    Open IE, click on view then toolbars and see if it is checked it

    If not check it

  • in the 'history' drop-down list, there is an option to "restore the previous session. I want to remove this option completely.

    I speak no crashes or my home page. I'm talking about the option in the history drop-down that allows anyone who comes behind me to restore my session, after I'm gone.

    COR - el, I read several threads with this question, and you always seem to post these links. I don't think you understand the question properly. I read the first link you posted, and the most relevant element has been 'store session completely disabling. so I went in: config, and did what I was told. I set the preferences browser.sessionstore.max_tabs_undo and browser.sessionstore.max_windows_undo to 0. it does not work. After that, I close firefox and reopen. in the drop-down list in the history, there's always an option to restore previous session, I click on it and it restores session.

    Diego, your response is not what I was hoping. I want to stay signed in the pages I frequent. like gmail, youtube, ect. your solution sign me out of everything every time. Thus, although technically it works, this is not the option I want to use. but after tinkering with the options in this section I figured it for everyone with my same worries:

    go to: Tools > options > privacy, in the 'history' pane, select 'clear history of firefox closing', click on settings for this option, select "Browse and download history.

  • Since the update to FF15.0.1, I can't upload to Photobucket and update of Flash Player crashes my browser. Help?

    The last two days, since the update to FF15.0.1 I not was able to upload on Photobucket. Online research suggest it is probably a problem of Flash Player, but when I try to update Flashplayer FF crashes. The only site that I had this problem with is Photobucket.

    I just use IE to update Flash Player but Photobucket downloads aren't always. I posted a question with the support of Photobucket but no response. I need help. Ideas?

    I use XP home with all updates.

    It turns out that the problem was with Photobucket. They solved the problem and everything is good.

  • Equium L40 - 17 M - can't watch Internet movies using full screen

    Hello!

    I recently bought a Toshiba laptop and when you watch videos (if Youtube or BBC iPlayer or something similar) mode full screen does not work. I get full audio and even the mouse cursor but no video?

    This is the laptop?

    Thank you!!

    Already search you the forum for similar problems? You should always do before posting a question on the themes that have already been discussed.

    Maybe this thread will help you:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29506

    -Right click on the drive flash streaming video
    -Click settings
    -display settings should be the first tab; Uncheck the use hardware acceleration

    I'd appreciate comments!

  • Disorders on new Toshiba 40L5435DG

    Hello

    I bought my TV Toshiba 40L5435DG only 10 days, the first day that the firmware is automatically updated.

    I have some problems, the tv comes the following:
    D ' open the smart tv sometimes reset and rearranges the initial configuration data
    -Sometimes when I type usb drive (I've tried different usb drives) and start playback of the media TV freezes to and MUST cut electricity, but does nothing.
    -Sometimes it does not illuminate the first time, and it should be cut off from the power supply to be turned on.

    Give me a solution?

    Thank you.

    Hi, I have the first problem too with my 48L5435DG, but not sometimes, but ALWAYS. I posted tread on this topic but no one answered. Waiting...

  • P6534: fall a Xeon X 3450 in an HP P6534 with a card mother MS-7613 (IONA-GL8E)


    It is not likely to work.

    You would be better to stick to in the list that you posted and normal processors.

    Special processors as extreme and Server edition CPU are likely to require a microcode update that is not HP.

    You can always try and post your results here.

    It will be proof positive to go or no-go on the internet for compatibility to the xenon. Its your money.

  • Silver heat sink compound Arctic

    I have a laptop t 1000 cto dv8, and while I don't think it's overheating, I'd prefer that it works a little cooler. Arctic silver makes a significant difference in the temperature of the CPU and GPU?

    The times ' now for both are at about 50 to 55 ° C. However the lower video sequences or animated avatars causes the time. rise to 60 ° C and even after that I closed the time programs. don't fall very quickly.

    I watched the video of reflow the where they put a thin plate of copper between the heatsink and the kernel. My question is, it is necessary that the thermal paste is placed between the copper coin and the heat sink, as well as next to the base of CPU/GPU?

    None of youtube videos show this carried out.

    http://www.arcticsilver.com/AS5.htm

    Thank you

    I tried to answer this post before, but somehow my internet connection went wrong.

    Your current time is good enough. Not necessary to apply the copper mod. Application of copper mod would increase the heat transfer, but will lose the flexibility of the heat sink, please be careful in the choice of thickness of copper.

    Reapply a good thermal paste would increase of heat transfer from the CPU to the heat sink.

    In my case, I'll do it after 2 years of use of the laptop. Portable over 2 years will be have dust stuck between the fins of the heatsink and probably have a thermal paste dry.

    Above suggestion is for the advanced users, novice users will find themselves with missing screws and interrupts here and plastic components.

    Please take some photos if you want to always do and post in the hardware section.

  • Problems with WLAN on Satellite M40X

    It is possible to get wlan working on laptop Toshiba Satellite M40X?

    I have Windows XP Home Edition installed and wlan worked fine, but after that I formatted and reinstalled Windows XP Professional, Windows could not find the wireless - ethernet adapter network adapter: (point yellow question mark?) I tried to install the drivers on the Toshiba site, but they do not seem to work properly. How can I solve the problem I don't know what wlan adapter is (Intel or something else). In otherwise, laptop works fine.

    A friend of mine has Satellite M40x-185 and it has network without WIRE Intel 2200 b/g card. It's always wrong to post just the name of the template but not exact model M40x-xxx but I assume that you have Intel WLAN too.

    Visit the portal of Toshiba WLAN Driver and use the latest version of the driver to install the wireless network on your laptop card.

    http://APS2.toshiba-tro.de/WLAN/

  • TP edge E130: restart after a shutdown-h now

    Hello

    I use Xubuntu 13.04 on my TP edge E130. Everything works fine, except one little annoying thing: when I turned off my laptop by using the command

    sudo shutdown-h now

    or

    sudo halt

    It's a normal shutdown, but always restarts then (POST screen is visible, too).

    When I have it off the power to help

    xfce4-session-logout

    He sometimes stops correctly.

    Where should I start debugging it?

    Hi zoltanthegypsy,
    Thanks for your reply. Disable WOL has not helped, but did a BIOS update (1.04 to 2.51). I am now able to shut down normally

  • iPhoto on Snow Leopard not geolocate more!

    Suddenly iPhoto ' 09 v8.1.2 (424) on Snow Leopard 10.6.8 does not appear geotags more!

    They have always been correctly posted so far...

    Neihter for old photos (taken by iPod touch 4th generation with iOs 4, but also other cameras to gps), nor to the more recent (taken by the iPhone 4S with iOs 8.3).

    None of my S. O. (OS X and iOs) never improved from those residing at the same time, with the only significant exception of 7.1.2 to 8.3 on the iPhone natively.

    Any advice?

    Geolocation in older versions of iPhoto uses Google maps.  Apple has not renewed the contract with Google, and now iPhoto and Aperture cannot access Google's servers to retrieve the cards or place names.

    The only versions of iPhoto, which can always use the functionality of the site are iPhoto 9.5.1 and iPhoto 9.6.1, because they use the new map servers provided by Apple.  You cannot use more locations in your version of iPhoto.

    To use the places with upgrade of the standard software from Apple for Mac OS X 10.11 El Capitan and migrate your iPhoto libraries to the new Photos.app.

    Apple has stopped the development of iPhoto and not to sell more, so you can't buy the only working version 9.6.1 any longer.

  • iPhoto ' 09 on Snow Leopard does not appear geotags more!

    Suddenly iPhoto ' 09 v8.1.2 (424) on Snow Leopard 10.6.8 does not appear geotags more!

    They have always been correctly posted so far...

    Neihter for old photos (taken by iPod touch 4th generation with iOs 4, but also other cameras to gps), nor to the more recent (taken by the iPhone 4S with iOs 8.3).

    None of my S. O. (OS X and iOs) never improved from those residing at the same time, with the only significant exception of 7.1.2 to 8.3 on the iPhone natively.

    Any advice?

    The contract between Apple and Google for the use of Google maps with iPhoto 9.4.3 and earlier for locations an elderly couple of months expired and was not renewed.

    Now uses Apple its own program for locations maps and too the use you need to run iPhoto 9.5.1 and Mavericks or 9.6.1 and Yosemite El Capitan or Photos and El Capitan.

    However, in order to get iPhoto 9.5 9.6.1 you must have a version of 9.X to Apple iPhoto has purchased and installed.  Because you can not buy Apple iPhoto 9 more your only option is to upgrade to El Capitan (a free update if your Mac supports 10.11.1) which will include pictures.

    Your Macbook model can run El Capitan and should be upgraded to 8 GB of memory from Crucial.com.  If you have the base 2 GB memory which is not sufficient to run El Capitan.  If you have 4 GB which works, but with your old machine upgrade to 8 GB will offer significant performance improvements.

Maybe you are looking for