always restart Windows Explorer

Similar Questions

• PC counters each attempt to fix/repair and finally, the loop to stop/restart windows Explorer.

  So beyond, I'm done with this laptop. He started by run me windows update and the awakening of a BSOD. Now browse those tedious threads, I know that the next thing people want are the dumpfiles. Well, you cannot make them because it won't create dumpfiles. I checked everywhere for them and double-checked to make sure that when I got bsod it is correctly configured to do. It will not create them. So ok, the next thing people say is running scandisk Sfc. Nope, BSOD in the course. Chkdsk? Nope, BSOD. during the. This laptop has a coherent dpc latency problem where every 10-13 seconds it stings really high, distorting the audio. I tried to disable drivers, update drivers, pulling on the battery, and it won't go away. To * with it I say, I can deal with that, besides there is probably a hardware problem, it's an old inspiron 5040. The greatest success in fixing something comes sfc running in safe mode with cmd prompt. He got to 100% and has absolutely nothing more. All this stems from the windows updates failed. But this latest issue is the water drop. Before the windows explore stopped working/restart loop, which prevents me from running damn near all executable on ANY startup mode, I was getting semi-fonctionnalites off safe mode with network. I was inside my damndest to try to solve the problems without paying a penny for the repair (because it's my operating system from windows to the 3rd address I got incredibly frustrated with questions and I'm NOT GOING to sink more money into the purchase/solve this *) but after a month of countless BSOD and failed system restore (BSOD on those too) I decided to say the * with it , it can still be used for browsing with chrome at least, since I found a way to activate the sounds of the internet registry. I had used it for about a month and realized that internet Explorer was causing in fact a kind of conflicts, because all applications requiring an i.e worked incorrectly, display of white windows resources that need to be pulled with knowledge then I tried to reinstall that is and makes the mistake of restarting, forget the automatic Windows Update. Well, I is none of that with this time and tried to turn off the pc before it started with nothing else than a glorified blue screening method. To restart, I got "windows is the restoration of changes", another reboot, then a "Welcome" I get started in the regular office, (not safe mode or anything like that) and he gives me a small white window with "custom settings" on it and literally nothing else. No toolbar, no desktop shortcuts. Wait a few seconds and I get "Windows Explorer has stopped working" and the option to close the window. safemodes boot loop to stop/restart windows Explorer and I can't do anything appear the Task Manager which is pretty useless, because I can't really do anything here except close programs that are not accessible in the first place. Safe mode only I can enter is the one with the command prompt. I don't really know what else to do. Quite happy to take a hammer and break the laptop for parts. There are so many problems with this thing, I doubt that someone will be able to help in any way especially withouth minidumps the BSOD. But if there is something simple that I'm missing for at least the minimum functionality that I was getting out of it until windows update in ruins me, feel free to try to solve the problems. The code the most common bsod I get is 0xf4. I put my money on half of the problem with the hard drive itself and the rest of the question was any other defective hardware. But ill be doomed if I buy another harddrive just to have more questions.

  Hello

  Generally, this problem is caused due to hardware or software related issues. As you mentioned that you have completed the restoration of the system and sets the Explorer loo, I would like to know if the problem is resolved or not.

  Regarding performance related questions, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the procedure described in the following Microsoft Help article and check if that helps. This Microsoft Help article consists of the steps to optimize Windows to improve performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Method 2:

  Put the computer to boot and check if the problem persists. This troubleshooting will help you find what third-party program or the app is the cause of this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• Always open Windows Explorer in maximum mode

  When I goto Windows Explorer I always open with maximum vision.
  For the moment, it opens in smaller mode and I have to click the view max.
  How can I always open in the view max?

  Arthur H

  Stretch the window to fill the screen (make max view) then close.  When you open it again, it will be max view - it records the last means, that it has been closed by default for the opening of the next time.  This is also true with Internet Explorer.  Keep in mind that if you reduce the screen then shutdown or logoff, you will be at the smallest display again when you open then (it opens not in absolutely minimal view: it uses size to halfway instead).  In internet Explorer this sometimes occurs when a secondary screen opens and you close just she and then stop or go to sleep - he uses this by default for new windows last shutdown, even if you didn't want to do.  There is no way I know to 'lock' to opening to view max all the time - you just have to watch how you shut up when finished.

  I hope this helps.

  Good luc\

  Lorien - a - MCSE/MCSA/network + / A +.

• To restart windows explore hangs and needs to restart

  Whenever I restart or start my system after a stop, I got an error message just after loging in ' Windows Explorer has stopped responding - restart "how to solve this problem? I asked in a Tech forum about this problem, and I got a response saying that I should check for missing files. How to check the missing files? I don't want to reinstall windows.

  Hello

  This is mainly caused by an incompatible Shell Extension.

  You can download this reg from my SkyDrive file:

  http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg

  and double click on the file to import. If you are unable to do this, run regedit.exe and import the registry file here!

  When the Windows Explorer crashes, Windows Error Reporting Service [1] creates a dmp under C:\Localdumps. Please download the file to your public Skydrive folder [2] and post the link here. I take a look at the discharge with the debugger, maybe that I can see what Shell extension is the cause.

  André

  [1] http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [2] "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Keeps restarting Windows Explorer in Windows 7.

  Original title: Why keep restarting my windows Explorer in windows 7

  It happens whenever I try to browse something using windows Explorer. I have tried almost suggestions in previous discussions of those who have already faced this problem. I tried the steps mentioned as log on in safe mode and try to disable the third-party software, but they have all failed to resolve my problem. I also tried to stick the explorer.exe in the system32 folder as suggested and failed or the other. I use Windows 7 Home Premium on ASUS a43s. Are there updates available from microsoft to resolve this problem?

  Hi Cikcumie,

  Thanks for the reply.

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Note:
  1) data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  2) after the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  3) when you do the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  4) an upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Problem restarting Windows explore!

  So my problem is when im trying to look for something in my computer for example, I get a window with the warning or whether, this is called: windows Explorer crashed and after that: windows Explorer restarts.
  I already tried a virus scan and orders cmd.exe and everything... but I still have the same question.
  Then I tried the event viewer, but I don't really know how to use it properly, but I looked around and under custom views / administration activities and number of manifestations: 10230, so here's the schreenshoot of it. And the General thingy, I copied under events.

  The failing application name: explorer.exe, version: 6.1.7601.17567, time stamp: 0x4d672ee4
  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
  Exception code: 0xc0000005
  Offset: 0 x 0000000000053290
  ID of the process failed: 0 x %9
  Start time of application vulnerabilities: 0 x % 10
  The failing application path: %11
  Path of the failing module: 12%
  Report ID: 13%

  I would be very happy if someone could help me!

  Greetings swear!

  Thanks for your time, but I acctually restored my old documents stand-alone and good sound now, so thanks anyway.

• Why Adobe Creative Cloud restart windows Explorer when it is upgraded?

  Every time there is an upgrade of the application Adobe Creative Cloud (not individual apps) it still restarts my process from windows explore. I would probably not so angry, but there are applications unrelated to 1 or 2 that have the tray icons that disappear if I kill the process explore and restart (what does CC update).

  The goal is to have download and install creative tools like Photoshop and Illustrator be as seemless as possible. In order to allow a 1-click Download & install from the browser of any of the Office applications in the cloud of Creative, the browser must recognize a specific Protocol in the URL and launch Manager appropriate for this Protocol. To do this, the browser needs a plugin installed.

  Some browsers will detect the new installation of a plugin and load correctly without having to restart the browser. Some need page reload. Some require the restart of the browser (which is where I think that IE land).

  In addition, we have crossed a number of bugs in the area over the last two months where IE has a lock on some errors installation resources and local causes for VAC. restarting the browser eliminates these errors.

  All that being said, he's clearly work that we must do to improve the workflow of updating CCA - both in terms of reliability and user experience. It's a high priority work for the ACC team right now and you should regularly expect improvements in the coming months. I do not expect stop us resarting IE anytime in the near future well that, for the reasons explained above.

  Thank you

  -Eric

• How to restart Windows Explorer?

  I accidentally turned off the Windows Explorer.  Now, it's on my desktop, including the start menu.  How can I get that back?  Does not work still to do a right-click on the desktop.

  CTRL + Shift + Esc to open the Task Manager. File-> new task and type of Explorer or explorer.exe and press ENTER.

• Windows Explorer has stopped running, restart windows Explorer

  Windows Vista Home Premium SP2 with all updates.  Already ran sfc/scannow but still having problem. Any help appreciated. A problem of causwe icons others not, IIE works fine but clicking on photos etc starts problem.

  The problem seems to be the ShellExtension1.dll:

  Fault Module name: ShellExtension1.dll
  Fault Module Version: 0.0.0.0

  The ShellExtension1.dll can be an element of Memopal:

  http://SystemExplorer.NET/file-database/file/shellextension1-dll

  Memopal is installed and, if so, can you uninstall Memopal and see if the problem resolves.

  Thereafter, you could try to reinstall Memopal, using the latest version and see if the problem is resolved.

• Windows Explorer issue-windows explorer does not respond

  I am trying to access my files from downloads, and I marked that windows Explorer is not responding and then, he's looking for a solution that is always restart windows Explorer and the problem repeats! Help

  
  Installs
  Original title: windows Explorer question

  Hello

  (1) have you made changes before the start of this issue?

  (2) what is the exact full error message?

  See the link below:

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• When you pass "Windows Explorer" stopping and restarting. Only happening since I installed 9 Microsoft Updates, the update of Windows 8 December 2009. (Vista Ultimate SP2)

  Each week, I (manually) install the recommended update of Windows updates. I'm under IE8 too. Also running Microsift Security Essentials.
  Since the installation of updated 9 dec, (KB974318, 905866, 890830, 976416, 973917, 970430, 976325, 976884, 971737) 8, about 3 - 5 times a day, I click to open a folder, or click a link - I get a window saying "Windows Explorer has stopped working".  He says while it collects information, and then restart Windows Explorer.
  It happened this morning, as soon as I clicked on "Windows Update" icon of the button 'start '. It also occurs when the single click to open a folder on my desktop or inside another folder.

  I've also observed sometimes when you try to delete an important file (for example 300 MB) the deletion starts but seems to hang and ends not - even after 10 minutes or more.

  Before installing the latest batch of updates I have not seen these problems within 9 months I've been running this machine.
  Any ideas?

  I run McAfee anti virus and it is up-to-date.  I also ran SpyBot and PC Tools 36 hours - clean.
  Last night I ran as Microsoft on line scanners - no found major problems, some problems of minor registry, which I corrected.
  Windows Explorer problem occurred twice since the scan.

  Someone knows a problem associated to the last batch of updates?
  Thank you.
  Colin

  I just spent a few hours of operation, McAfee, Spybot, PCTools Spyware Doctor Lavasoft Ad-Aware, removal tool Microsoft malicious software, Microsoft defender, PC Tools Registry mechanic. All work in a deep analysis, if appropriate and all give zero infections/problems.

  You can run the scan utility from now until the cows is home and still not detect & remove all this hijackware, Colin. See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Now see step #3 ("now run a thorough check for hijackware, including display asked newspapers...) in my previous answer.

  TIP: Running Registry Mechanic may have made matters worse! If you ever think your registry database must be cleaned, repaired, amplified, to the point, or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Guard Windows Explorer crashing and restarting

  Hi all

  I use Windows 7 Home Premium 32 bit on a Toshiba laptop. Yesterday afternoon, this "Explorer stopped responds" / "reboot...". "begun loop that I couldn't solve. I was not doing something special when he started to occur, no new installs, no new program, just browse the Internet with Chrome, Firefox and Internet Explorer Beta (all 3 for various reasons not related to the problem). Here are the things I've tried so far:

  1 system restore - unable to do because apparently, even if it was lit, "0" space has been assigned to the and there is no restore point
  2 safe Mode - does the same thing
  3. clean the Boot - did the same thing
  4 sfc/scannow - no integrity problem found
  5 chkdsk - no problems found
  6. Norton Internet Security 2011 Full System Scan - no problems found

  I spent over 6 hours trying to solve this problem, including 2 Norton analysts, trying to help through the support of the remote control. Only thing, they found a malware 'hack' through a combination of a-squared one of them installed, removal of which had absolutely no effect on the problem.

  I was able to disable (complete the process stops the loop but it means that I have no bar of tasks/desktop/folders)

  Any help would be greatly appreciated and thank you.

  (If possible, I prefer not to reinstall windows, format my hard drive or install a third-party program to "fix" for this problem)

  Just to make the clear solution for future reference:

  Go to Event Viewer (open Manager jobs by Ctrl + Alt + Delete, click on 'file'-> 'break-in' type "eventvwr.msc" for Event Viewer) to see what type of program is made a mistake in addition to Windows Explorer (2 errors showed on every restart Windows Explorer). Look at the path of the file for the second error. E.g.

  Activation context generation failed for "c:\program files\real\realplayer\plugins\rmxrend.dll." Load Assembly Microsoft.VC90.DebugCRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8" was not found. Please use sxstrace.exe for detailed diagnosis.

  Note the main program (in this case realplayer). Then follow these steps, in order, until Windows stops crashing:

  1. ensure that the problems causing program is up-to-date, otherwise, update.

  2 Uninstall (go to the Manager of task-> type 'file'-> 'run' in "appwiz.cpl" for Add/Remove Programs)

  3. If #2 working, reinstall it and see if the problem is still present. If this is the case, uninstall and keep it uninstalled.

  My problem was caused by RealPlayer and went away once I uninstalled it. My realplayer has been updated and reinstall the back problem, so bye bye realplayer.

• Windows Explorer-constantly does not

  Help!

  For 3-4 weeks, my computer had problem after problem: almost all the programs I opened works fine until I try to get out of this program, then the message "(nom dele de programme) not responding" appears. " This is by far the worst with Windows Explorer. Whenever I try to open it to a video file, picture or any other file type, I am hardly able (and a lot of time not able) to even find him before the message. With Windows Explorer, it is even not 30 seconds before the message appears and must restart Windows Explorer. I had to use programs other than windows Explorer just to make a few basic things, like a video of opening or deleting a file. I am considering buying Windows 7, although it will be a while from now. I need to find a solution and I have limited Internet access and can not and not buy anything online, so basically I have one that I can buy a local store for cheap or need a free fix.                         Can someone please help?

  Hello

  Explorer Windows and IE are closely related to most of the things that also affect influential IE on Windows Explorer and
  That's why other programs. So try these two methods.

  1. which antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
  ==========================================

  2. If the methods above didn't help, try a process of elimination to determine the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• "Windows Explorer has stopped working" if I open Control Panel

  Guys, could someone help me please?

  When I open the Control Panel, it says "Windows Explorer has stopped working" and then it restarts Windows Explorer. When I right click on any folder it says "recording of the UI language is not valid" 5 times and for a split second, it says "Corrupted registry" then it works. But I am unable to use the control panel.

  I have Windows Vista home premium and Norton Antivirus.

  Can someone help me please?

  Hello

  The error message says something about corrupt registry.
  So, it seems that this issue would be related to incorrect or damaged registry entries.

  If the registry is damaged, your operating system will not work as it should and can feel such or similar problems.

  I m using the CCLeaner to clean the registry and other system files.
  It s a free tool and you should try it.

  If this does not work and if you notice the same question so I would recommend reinstalling the OS using the Toshiba recovery disc.
  In most cases this will help you fix this registry

• Windows Explorer crashes on XP after Session VPN

  I'm usually in the office and I have 2 directories of intranet server mapped with persistence. The problem I have is when I'm not at the office and I do a VPN connection in our network of offices to use these servers after I leave the VPN connection, the next time I open it it crashes and don't recover without having to restart Windows Explorer. Any ideas how to avoid this?

  Hello

  I suggest you to send your request from the link and check.
  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads