Always open Windows Explorer in maximum mode

Similar Questions

• Open Windows Explorer became terribly slow - Windows 7 Ultimate x 64

  Hello, I hope someone can help me. I'm not very good with computers. As the recently, whenever I try to open Windows Explorer to access my files, can it anywhere from 15 to 30 seconds to open Windows Explorer. However, once the browser is open, navigate to the directory is as fast as it has always been. It's really an inconvenience, and I would really like someone to help me get to the bottom of this issue. Below I will list my specifications:

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  System manufacturer Dell Inc.
  Studio XPS 7100 model system
  System Type x 64-based PC
  Processor AMD Athlon (TM) II X 4 logical processors, 4 Lossnay, 3000 Mhz, processor 4 945
  Physical memory (RAM) installed 6,00 GB
  If you need more specific information or do I have to anything it either especially feel free to ask me questions. Any help is very appreciated.
  Thank you
  Cameron troupe

  I recommend that you run Disk Cleanup or cCleaner to remove temporary files as this will reduce the time to scan security software.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.computerhope.com/issues/chsafe.htm

  http://www.Malwarebytes.org/products/malwarebytes_free

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

• always restart Windows Explorer

  whenever I open my 'downloads' and 'video' folders, a guest always appears "windows Explorer has stopped working, windows Explorer restarts, then when I right click my files/icons of the menu shows"cut, copy, properties, etc. "  pls help me thanks, I don't know if it's some kind of virus or an error in file/system/app, so please help me thanks!

  Can you check here?

  Start > Control Panel > system and Maintenance > Problem Reports and Solutions > view problem history

  You can right click on some of the mistakes "Stopped working" "Windows Explorer" > view problem details

  What information is given?

• Black screen when trying to open Windows Explorer by using the keyboard shortcut

  My desktop (Windows 8) when I use the shortcut (window-E) keys to open the Windows Explorer screen will just blank and then re - opens in desktop.

  Any suggestions would be welcome, please. If it is not possible to solve is there another way to open Windows Explorer from my office?

  On the desktop, you can create shortcuts to open an application or a file, including Windows explorer.
  How to do this you can read in the follow-up paper - http://support.microsoft.com/kb/2820848

  Very interesting short video on this subject, you can watch here

  Do you need help more?

• Open Windows Explorer to your Favorites

  When I open Windows Explorer, it opens in the default network.  I would prefer that he opened in Favorites.  How can I change this?  Thank you!

  How to open Windows Explorer to Favorites in Windows 7 - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/open-Explorer-to-Favorites-Windows-7/

• A way to show the history button when I open Windows Explorer

  When some applications open the Windows Explorer, the window opens with a touch of history very useful.

  I would like to have this button available when I open Windows Explorer to search for files myself.

  Thank you, Shawn, but it wasn't the problem. But I found the folder in my C: and put a link to it in the Favorites and that solved the problem.

• Run the error when you open windows Explorer

  Hello

  First of all thank you for taking the time to read this post and any help will be greatly appreciated.

  I had some problems using the windows Explorer,

  Sometimes, when I open any file (Ie. My documents), it works as it should, however, other times it opens and everything becomes black, and sometimes a message box appear and say "Run time error, then give it a bunch of numbers."

  Other times it becomes transparent and only the top title bar with close and maximize the show

  Thanks for your help

  Popo94

  Hello

  ·         Since when are you facing this problem?

  ·         Will there be any changes made prior to this issue?

  However, you can try these.

  1) check in safe mode.

  (2) if the problem does not persist in safe mode, check the clean boot.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't open Windows Update in safe mode with access to the internet by trying to resolve an update Error 80070020 on Windows Vista... Can anyone help?

  I followed the instructions for Error 80070020 to start Windows in safe mode with internet access, but Windows Update does not open when you click on it in the box start the search.  Internet access is available and I can connect with other sites.  However, it starts when Windows is in normal mode, but that does not help me solve my problem

  To decode 0 80070522 x. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of the East of 20, the number, the Windows error.
   
  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 20 Menu display - decimal. It will say 32.
   
  Start an command prompt (Start - All Programs - Accessories - command prompt) and type
   
  net helpmsg 32
   
  and it will say
   
  The process cannot access the file because it is being used by another process.
   
  Use Notepad to search for FATAL and 80070020 in C:\Windows\Windowsupdate.log.

• Vista will not open windows Update in any mode

  I have a Windows Vista Home Basic system and I try to update.

  I can't open windows update control panel (or system properties) in normal mode. I tried a clean boot and boot safe mode and I still cannot open windows update.
  Control Panel opens in safe mode, but even from there, windows update still will not open. There is no error message when trying to open the updates.
  The task of the wuauserv service manager is running.
  "Updates" are available depending on the icon at the bottom right and it seems to download the updates. But I can't open it to install updates.
  I think that this system is not have service pack 2, but I can't without windows update.
  Can anyone help?
  Thank you

  Hello

  -What happens as you try to open windows updates?

  I suggest you to please follow the steps mentioned below and get back to us with the results.

  Method 1: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  Method 2: Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Method 3: How to reset Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope that helps!

• I can't open windows update in Safe Mode. Also blue screen at startup ('a forward driver a buffer based on the battery'

  My laptop keeps hitting a blue screen at startup ('a forward driver a buffer based on the stack'), I can only start it in safe mode. I want to try windows updates to see if this will help, but whenever I click on the button to update windows on the start menu, nothing happens. I tried searching for the program to see if I can open it another way, but can't find it. If I click on windows update and then nothing happened. I have windows vista home.

  original title: I can't open windows update

  Hey ElizabethSlater,

  Try to run a full scan with the Microsoft Safety Scanner to make sure that nothing is found.

  Try also to install the latest drivers from your computer manufacturer's website. If you have difficulty to locate the website of your computer manufacturer or the drivers on their page, please provide your computer brand and model in your next reply. If you have built your computer you need visit the site of the manufacturer of each piece of hardware to get the latest driver.

  Once the drivers have been installed, try to restart your computer, and then test to see if the same problem occurs.

  Hope that helps.

• WHEN I TRY OPENING WINDOWS EXPLORER PANEL CONTROL CLOSE DOW.

  I can't open the control panel.  I get a message "windows Explorer" closing."

  1. make sure that the computer is virus-free
  Use Malwarebytes:
  http://www.malwarebytes.org/ ... pickthe free version.

  2 run a file system check to ensure that none of the corrupted files.
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  3. run a disk check for corruption and possibly repair errors and bad sectors on the hard disk.

  Start button > Search box, type cmd > look up, right-click on cmd.exe > Run As Administrator > in the black and white window, at the command prompt flashes, type chkdsk/f/r > press the Enter key.
  Note: there is a space between 'chkdsk' and ' / '.
  The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
  Restart your computer. It will take quite
  some time. DO NOT stop the machine. Just wait.

  4. optimize performance
  http://support.Microsoft.com/kb/959062

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• Open windows Explorer, in my computer (disc mode)

  I remember a point by opening Explorer windows as my computer (disc mode) in Windows 7, where you can update the shortcut from the menu start through the property browser and changing the target. I'm a little hesitant about changing the file Explorer in Windows 8. Is there a different way for Windows 8, or is not possible?

  Hi Al,.

  Thank you for your response.

  I'm glad to know that you have addressed the issue.

  Your efforts to solve this problem is appreciated. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Open windows Explorer to the navigation pane

  It is a small non-critical problem that was bugs me for a long time and I was not able to find any station anywhere, about it.

  I want Windows 7 to Explorer open by putting focus on the navigation pane, so I can quickly mouse scroll until I'm looking for.

  On a drive hard partition, I switch on the properties of the shortcut of/e, D:\My Documents and with libraries and personal records removed by Registry hacks, Windows 7 Explorer opens to D:\My Documents, but focuses on the files pane.

  What - not great.

  I stumbled in a forum that mentions this topic for Win 7.  Their solution is a dll file that can be downloaded on the post below.

  http://www.classicshell.NET/forum/viewtopic.php?f=8&t=2069

• Cannot open windows 7 or safe mode or anything else!

  I have a laptop Toshiba Pro/P300 newish supplied with Vista, but I, perhaps foolishly, had a 'real' copy of Windows 7 Home put on it. It worked fine for 2 years then it started crashing last month (save data of disc/so-called) every day, but recently he finally close completely and gave the following message. I have tried EVERYTHING to get into mode(cannot!) sure to get to the window (cannot!) of "repair". I tried F2, F8, F12, but it is always comes down to this message code and State. I can get into the screen (BIOS) of the establishment and have changed the 'Compatibility' thing, but it made no difference. Not sure if I can do something else in the establishment. I do not have the product recovery Toshiba DVD-ROM, Satellite Pro/P300, Microsoft Windows XP Prof - BUT I am desperate to try to recover the data (especially on the office) I try the XP disk, I WILL PROBABLY delete all THE data! If this work does the same! Is this correct? Is there a 'repair' function in the recovery disk that will save my data? What can I try recover data? Should I expect someone to do disk boot cd or something? Keep in mind I'm practically illiterate pc!

  Hope someone can help... soon!

  Windows Boot Manager
  Windows could not start. A recent hardware or software chance miht be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer." #

  Status: 0xc000000f

  Info: The boot selection failed because a required device is not accessible.

  If you are willing to do anything to retrieve data, because probably you have no backup, and then remove the disc, connect it to another PC to see if the disc is readable and usable data

• First hangs whenever I open Windows Explorer.

  Whenever I'm in the first attempt to import using the windows double Explorer clicking import or whenever I go to export and edit name and address first just breaks down. A box of windows problems shooter stands up and says then close the program. This is it, no errors, nothing.

  This does not happen when I start a new project until after I imported the initial set of images, every time after that it crashes.

  Happens on all projects any images I use.

  Need help desperate since the import and export are parties literally the most vital first.

  Data sheet:

  -Windows Pro 10

  -Intel i7 4770 k

  -Corsair 32 GB of RAM LP

  -Nvidia GTX 780ti - updated drivers

  Thank you.

  If you do not touch the file name selector, first going to export using the location by default name and folder - so the worst case just move and rename the file after that that he has finished rendering.