Amazon Kindle on Surface - problem with highlighting using pen

Similar Questions

• Problem with Hotmail using Firefox

  First of all, I am aware that this problem has happened to other people. They have different levels of success with different solutions. Thing is, at this moment, none of them work for me.

  I have Firefox 12.0 and starting yesterday I can access my Hotmail account, no problem, but it does not save the clicks in the e-mail domain. I can sort of browsing around, but I can't read emails; I can't send e-mail messages; and I end up having to use Internet Explorer.

  It's happened before, a couple of months. At the time, what worked was using Hotmail with an HTTPS connection. Worked like a charm.

  Now, it does not work. Neither clear cache my story or my cookies. Neither fact restart Firefox in safe mode, i.e. with all disabled add-ons. So I'm at the end of my rope, because nobody seems to have any other advice.

  The only thing I can think of who might be involved was running an MicrosoftFixIt program, which sets out what seems to be a recurring error for many users (sometimes Windows Update would list not updated). I did a couple of days, and yesterday I had this problem with Firefox. I had done once before, and well I'm not sure I * think * it is at the same time I got my first issue of Hotmail.

  Outside the info in troubleshooting information, all I have to add is that I use Windows 7 Ultimate.

  Any help would be appreciated. See you soon.

  the details of the system, you have presented that it seems you have the plugin pdf foxit reader on your system - it is known to cause problems with hotmail since firefox 12. Disable it in firefox > addons > plugins until there an update by foxit, which solves the problem

• M45 S351 problems with scrolling using the touchpad

  I have some problems with scrolling with the touchpad. In some applications, like Mozilla Thunderbird, the touchpad scrolling does not at all! If I contact the right side of the touchpad by finger in Thunderbird, I see the label of Scroll on the screen, but no scrolling occurs. What is the problem? In Opera, I need to click on the browser page to 'activate' the touchpad scrolling and it also irritates cause in IE I do not have such problems: I have lunch just Explorer and scrolling of the works from the beginning... How to solve this problem?

  [Edited by: admin on August 29, 2006 06:52]

  Fix for that is unknown to me, but it turns out that the unit has been tested only with Microsoft products (Designed for Microsoft WXP label applied on the device) and not with other third-party software of the part. This function is not only an example. There are many of them. Please don t see this as a problem.

  On this path, I will not say that you MUST use just preinstalled stuff but there are many things that you have to live with.

  Perhaps someone else knows more about it.

  Good bye

• problem with the use of the model

  Hello

  I use Photoshop CC and all the time I have a problem with the help of veneer of reason. In fact, I can't use any template, because when I opened the window of boss, there is always this same situation-> window does not open properly /It is the visible part of the window and when I pressed on it do not bosses see / so I can't use any model - printscreen below :

  

  How can I solve this problem?

  Try resetting your preferences.

• Problems with the use of the Tablet

  

  I have recently downloaded the new update, as well as restarted the trial. Whenever I try to use my tablet, he made a line and start the drawing at the end of it, as shown above. In addition, whenever something pops up, such as the box 'save or throw?', I can not click on one of the buttons because it will allow me, I had problems with this in my other trial as well. I would like to help solve these problems, thank you.

  Hi all

  The problem associated with the brush and the pencil drawing in Flash Professional CC 2015 configuration dual monitor with Wacom devices has been fixed in the latest update. Please update Flash Professional CC 2015 v15.0.1.179.

  Rgds,

  Mukesh

• Problem with Script using New() to create a #Vectorshape

  Hello

  I'm having a problem with a movie in a movie script, I build and I can't understand why.

  The unique film script, developed by JC in 2004, is reproduced below. It works perfectly in a film in itself. But I need to integrate it into a sequence exists in which the other sprites and behaviour must co-exist.

  The problem I see is that George is created with the new command (can be seen in the message using window put George), but it won't allow attachment of gMem.regPoint, gMem.centerRegPointand so on. These errors any return.

  I would also be open to another solution to the problem. What I have to do is to create rectangles which represent a plan view of a roof on an underlying grid and then be able to slide and place other images on it (it's not a game for training purposes).

  I use MX2004 on a PC. Any help, greatly appreciated.

  Rod Wolford

  ------------------------------------------------------------------------------------------ --

  George overall, gCount, gNum, gLoc, gCreateVert, gMemNum

  on prepareMovie
  clearGlobals()
  _movie.puppetTempo (60)
  gCreateVert = False
  gMemNum = 5
  end

  on mouseDown
  If not (gCreateVert) then
  George = new (#vectorShape, Member gMemNum of castLib 1)
  gMemNum = gMemNum + 1
  gMem.regPoint = point (0,0)
  gMem.centerRegPoint = False
  gMem.closed = False
  gMem.antialias = True
  gMem.strokeWidth = 0.25
  gMem.strokeColor = rgb (0,0,0)
  gNum = getFreeChannel()
  channel (gNum) .makeScriptedSprite (George, point (0,0))
  Sprite (gNum) .encre = 36
  gCount = 0
  gCreateVert = True
  end if
  
  If gCreateVert then
  
  If the doubleClick may
  gCreateVert = False
  gCount = gCount - 1
  gMem.deleteVertex (gCount)
  gMem.closed = True
  gMem.fillMode = #solid
  gMem.fillColor = rgb (random (256) - 1, random (256) - 1, random (256) - 1)
  gFinished = True
  output
  end if
  
  gCount = gCount + 1
  gMem.addVertex (gCount, the mouseLoc)
  
  gCount = gCount + 1
  gMem.addVertex (gCount, the mouseLoc)
  gLoc = the mouseLoc
  
  end if
  
  end

  on enterFrame
  
  If gCreateVert then
  
  gMem.moveVertex (gCount, the mouseH - gLoc [1], the mouseV - gLoc [2])
  theLoc = (gMem.vertexList) [gCount] [1]
  
  If not (theLoc = the mouseLoc) then
  gMem.moveVertex (gCount, the mouseH - theLoc [1], the mouseV - theLoc [2])
  end if
  
  gLoc = the mouseLoc
  
  end if
  end

  on stopMovie
  theCount = castLib (1).member.count
  Repeat with i = 1 to theCount
  If the Member (i) game = #vectorShape then member (i) .erase)
  end repeat
  end

  on getFreeChannel
  
  Repeat with i = 1 to the lastChannel
  If sprite (i).member.type = #empty then
  aNum = i
  output of repetition
  end if
  end repeat
  
  return aNum
  
  end

  While I have not read any of your script, try to replace

  George = new (#vectorShape, Member gMemNum of castLib 1)

  with

  George = _movie.newMember (#vectorShape, Member gMemNum of castLib 1)

  It is possible that the film you want to integrate that into a script #movie with a #new Manager, who must have been typed as a script #parent

• Major problem with transparency using Flash Player 11 on IE 9 with Intel HD graphics card

  There are some problems with Flash Player 11,0,1,152 with Intel HD graphics card when using Internet Explorer 9 with hardware acceleration enabled.

  Transparencies are not working!

  They appear just like the black areas on the page when wmode = "transparent".

  See my bug for details, test URL and screenshots.

  I logged a bug:

  https://bugs.Adobe.com/jira/browse/ASC-4370

  I've also seen a few similar posts:

  http://forums.Adobe.com/message/3992938

  http://forums.Adobe.com/message/3992736

  http://forums.Adobe.com/message/3992735

  To work around this problem, you can disable hardware acceleration in the settings of IE9 to prevent this, but performance is terrible and this is not a solution.

  Can someone from Adobe please tell me when this is likely to be resolved - this is a pretty catestrophic bug!

  Everyone knows this?

  Thank you

  Luke

  Transparency bug has been fixed in 11.1.102.55 to today release so please check if your problem still exists or resolved. It is useful if you update result on above bugs.

• Problems with the photoshop pen pressure, please help!

  I have problems with the stylus pressure sensitivity. My drawing tablet works great and fits perfectly, but photoshop can't detect the pen pressure. The Tablet I have is a brand new turcom ts-6580.

  Yes, I tried their website and had no luck. I searched online to understand this and apparently this tablet has the same drivers as the tablet of the Oh, I guess that they were made by the same company. I sent an email to remember on this subject and they sent me a link to download the latest version of the driver.  Once I pulled the program and checked "TabletPC support." Photoshop has begun to recognize the pen pressure.

• Healthcare.gov suggest IE or Chrome. All the reports of problems with Firefox using Healthcare.gov?

  When I get to the point to enter my contact information and click on continue system errors and not move forward. On the chat line with tech support to Healthcare.gov suggested IE or Chrome. Other users of Firefox has had similar experiences. If so, what was your resolution? Thank you. flbob

  You may need to enable cookies from third party if the parameter visited does not work.

  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can also try a new private window (which uses a separate set of cookies).

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Problem with the use of MID/LEFT functions

  I have a problem, see the point of these functions if (as seems to be the case) they will not allow another cell to be referenced.

  I want to do a SUMIFS with match being the first four characters of another cell data. I can't find any way to do it without manually copying the first four characters in another cell.

  If I use only LEFT like this:

  LEFT ('ABCD', 3) to derive 'ABC '.

  so why would just enter ABC in the first place? But that's what show examples and any attempt to do what I really want

  that is LEFT (F19: 3)

  causes a syntax error.

  I believe that I'm missing something really stupid, but I'm darn if I can see it.

  Hi jon,

  LEFT (F19: 3)

  causes a syntax error.

  Try a comma in place of the colon

  

  = LEFT(B2,3)

  It's your area used for the decimal point. If you use the comma for decimals, use a semicolon in the formula, = LEFT(B2;3)

  Kind regards

  Ian.

• Problems with speakers using Bluetooth (a2dp) with several Windows users

  I have the bluetooth speakers (Yamaha NX B02)
  they are easily configurable in bluetooth stack Toshiba everything works
  as long as I use my profile

  If only someone else wants to log on to any other profile (Windows XP Home edition)
  battery Bluetooth pair with the speaker Yamaha

  I disconnect the speakers on my profile
  Speakers are in pairing mode - they are on the list of devices to connect
  but they just don't connect.
  Once they are paired on the profile "User1" on "Laptop1".
  the "user2" or any other on the same "laptop1" aparently is to buy a new set of speakers
  coz this standing right next to him are to be used when you are logged in as "user1".

  First of all I really don't see why the bluetooth stack holds the list of devices, and a different configuration for each user?
  However - is it possible to IMPORT connection parameters of device somehow of my profile to any other
  Or maybe there is something else I should do to be able to pair it with my speakers no matter as to which I am connected now

  Thanks in advance

  And YES - the Yamaha set sounds great - I'm really happy

  Hello

  I m not 100% sure that if I understood exactly you <-->Bluetooth speaker problem.

  According to your message, you can't pair BT speakers during the second use Profil2 if the speakers are already paired with the mer1. Am I wrong?

  Well, in my opinion there are nothing wrong because the speakers were already connected to the laptop using the BT. to my knowledge you cannot connect any BT device if it s already connected using another profile.

  I think you should always disconnect the BT speakers using the mer1 if you use it n t. Then another user using Profil2 would be able to connect the BT speakers.

  Best regards

• Problems with highlighting of the rows of the table through RTF-model

  Hello!

  Peace im new in the world of BI Publisher. For the moment, I try to create and RTF-model with the Office AddIn for Word Bi-editeur (2010). I want to create a table based on a table of a pdf document existing already. I have all the data in the right format and order and just worked fine - until I wanted to change the background color of some specific lines.
  If I add that a statement such as

  <? If: Variable = "Expressionstring?" > <? attribute@InContext:background-color;' #FFFF80 '? > <? end if? >

  the context of the evolution of the entry. But the fact the line height. It develops. The expressions more that I use more it grows. That of not good, because the table is so great that it only fits on a single page with fine lines... I tried to apply a height specified in the line through the word, but it does not work.
  I searched a couple hours and still didn't find anything regarding this problem. I appreciate any ideas how to solve this problem.

  Tounsiiaa in advance

  Gabriel

  To help those who have a similar problem: it's just like sfr.farhan.fani wrote. I try to give you a general expression:

  
  

  <? If@row:ROWNAME=VALUE? > (this should work with = > etc do not forget the ' ' for strings etc..)

  < xsl: attribute name = 'background-color' xdofo:ctx = 'incontext' > lightgray < / xsl: attribute > (lightgray can be changed to hexa% and %valeurs)

  <? end if? >

  Hello

  Try the following expression

  5000? >

  LightGray

• Problem with the use of the ADF libraries

  JHeadstart version: version 11.1.1.5.27

  JDeveloper version: Studio Edition Version 11.1.1.7.0

  Scenario of

  I'm trying to build an application using ADF libraries like below:

  Common code - extension of framework classes

  CommonUI - LOV hides, etc...

  Common model - ADFBC all entity objects

  Several subsystems (view controller 'helper' projects)

  Main view controller project

  I have created libraries according to the guide of FMW and have imported correctly into the relevant model projects and view controller.  In JDeveloper, I can see the libraries OK and able to build my screens without any problem using JHeadstart.  All of the subsystems are managed independently, i.e. I used JAG to create my application and can run the autonomous subsystems.  The problem comes from the main view controller project.  I have imported successfully all libraries in the project of main view controller and you can see all the controls data from libraries in the navigation Application in JDeveloper.  According to the JHeadstart user guide, I imported the NLS library by beams and have modified the JHeadstartApplicationDefinition.xml file to include my libraries (all names and paths are 100% correct).  Now when I run the JAG, it removes all the ServiceDefinitionRef I added to my library.  When I run the application crashes and JDeveloper reports the following error:

  "oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.ConfigException, msg = Houston-33005: Configuration DgmUC003ServiceLocal cannot be found."

  "Caused by: oracle.jbo.ConfigException: ADFContext Houston-29114 is not configured to process this exception messages." Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-33005. Error messages settings are {0 = DgmUC003ServiceLocal} ".

  DgmUC003ServiceLocal is one of my libraries.

  Can anyone help.

  I tried many things to fix this, but cannot find an answer.

  Interestingly, I once managed to recognize a library (I removed all but one subsystem libraries) and it worked.  When you use the JAG, it not to overwrite my amendment to the JHeadstartApplicationDefinition.xml of the file but when I added a library more he still replaced my amendment and gave the above error for the new library.

  It was the JHeadstartApplicationDefinition.xml file before execution of JAG:

  < ServiceDefinitionRef location = "MasterServiceServiceDefinition.xml" name = "MasterService" / > "

  "< Any ServiceDefinitionRef ="true"name ="UC003Service"location ="... /... /.. /DgmUC003/UC003View/properties/DgmUC003ServiceServiceDefinition.xml"/ >

  "< Any ServiceDefinitionRef ="true"name ="sdService"location ="... /... /.. /SD/sdView/properties/sdServiceServiceDefinition.xml"/ >

  That's what it was after completing JAG:

  < ServiceDefinitionRef location = "MasterServiceServiceDefinition.xml" name = "MasterService" / > "

  "< Any ServiceDefinitionRef ="true"name ="UC003Service"location ="... /... /.. /DgmUC003/UC003View/properties/DgmUC003ServiceServiceDefinition.xml"/ >

  He removed the 2nd entry of library?, wouldn't not and gives the following error:

  "oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.ConfigException, msg = Houston-33005: Configuration sdServiceLocal cannot be found."

  It's very frustrating, I followed all the instructions to the letter.  I would not expect a very simple thing like that does not work.  Any help, greatly appreciated pointers.

  Thank you Trevor.

  Hi Paul,.

  My apologies for not updating this thread earlier.

  The good news is that it has been resolved, the issue seems to be with JDeveloper and not JHeadstart (or maybe just a combination of the two).  That's what I do:

  1. Edit the file JHeadstartApplicationDefinition.xml
  2. Reconstruction/compile the project (in JDeveloper which is Alt - F9)
  3. Do a "save everything" (belt and suspenders, probably not necessary as reconstruction not save)
  4. Output JDeveloper (close, file-> exit)
  5. Restart JDeveloper
  6. Run the JAG (the new library names entered in step 1 are NOT replaced)

  This workflow has worked 100% flawless, I don't know what closure JDeveloper is but it works.

  I also now always close JDeveloper after importation of new libraries in my main view controller project because I think it's also a question, perhaps all related.

  I hope it works for you.

  Trevor

• Problem with stitching using photomerge in Photoshop CC2015

  Certainly a noob here, but I try to understand what I can do differently to mix successfully 8-10 JPEG files using the photomerge feature. The photos are aerial stills of a mall on the roof, shooting with a quadcopter to 125' above that surface. My altimeter varies only about a foot that I place the helicopter overlapping stills of the roof surface, but Photoshop produces a composite image that has geometric distortion and layers incongruous way.

  Interesting.  I flew the helicopter again and took a new series of photos of the same altitude, but this time in vertical mosaic, with probably 30 to 40% overlap, and Photoshop seemed to love working with these images better. In fact, I thought that I would get the poor image quality, there are winds of 15 to 20 kt when I flew; Maybe I'm just lucky stumbling. This merger is 6 images and Ps not create geometric distortion / misplaced layers that happened when I made a merger of the two horizontal and vertical images.