Among the programs that I use now won't work

Similar Questions

• What I have to install all the programs that I use on my virtuial pc I already have on my windows 7 professional such as Outlook, etc. ?

  When you use virtual XP for Windows 7 Professional, do I need to install all the programs I need in as well as outlook, etc. and they will synchronize automatically?

  Yes and no.  Yes you need to install, and not only they don't synchronize automatically or manually.

• What PHOTO library is the library of real photos that I use now

  What PHOTO library is the library of real photos that I use now.

  I'm in 1.3 PHOTOS

  In the finder, located in the PICTURES folder there are 3 library of as I will show here.

  

  I'm confused because of the dates that are associated to these. When iPHOTO became PHOTOS is iPHOTO Library.migratedphotolibrary who became now the PHOTO (ORIGINAL) LIBRARY. PHOTO LIBRARY

  OR the PHOTOS IS LIBRARY.photoslibrary the current collection of photos.

  each has a different file size and date:

  

  

  

  If someone can explain to me I would give thanks, that is the library that I use now, 1.3 PHOTOS

  Thank you

  jojoguitar_mn_usa

  Could be one of them - you decide - person other than you, who controls - hold down the option key while launching Photos and the use of the select Library window to test each - quit Photos while you what to use as a default is defined as pictures opens always the last library used when you start so it is available

  One you use is shown in the photo ==> of general preferences to the right of the location of the library

  LN

• WHERE WILL OPEN IN MY PC TO SEE THE PROGRAM THAT I RARELY USE

  WHERE WILL OPEN IN MY PC TO SEE THE PROGRAM THAT I USE RARELY. My pc is slow and I want to install the program that I barely and sometimes used to uninstall it, where in my computer that will show me how frequent or sometimes I used the programs that I have in my pc

  Go to Start/Control Panel/programs/uninstall a program and get a list of installed software.

  Beware, there may be programs that are not often, however, DO NOT uninstall anything unless you know what it is, there will be programs that you need here and you can cause problems for yourself if you go too stupid.

  Just remove programs not likely to speed up the PC, you need to run disk clean - start/computer - right click drive C: - go to properties/disc clean.

  You can run a scan: -.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• I get the following error message when trying to format drive C: "Windows cannot format this drive. "Leave all utility disc or other programs that could use this drive.

  Original title: how to format drive C?

  I have Windows XP installed on my C drive, but due to the lack of hard drive space, I installed another Windows XP on drive D. Now when I try to format the C drive of the new installed Windows, I get this error:

  "Windows cannot format this drive. "Leave all utility disc or other programs that could use this drive.

  Hello

  Check if you are able to format drive C in a clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Warning: Formatting the drive will remove or erase all the data on that drive.

• I deleted my gmail account just now and realized that it was the email that I used for my sync now.

  Hi all, thanks ahead for any help. I use sync for awhile now and works a lot and on all my devices. Now my problem is that I forgot the email that I use for my sync now has been deleted and I don't know how to change it. I save all the bookmarks and Favorites, but wanted to know if there was a simple way to change my sync now email to another gmail email address. Don't want to lose anything in case I have delete and then try to load my sync now the recovery key does not work with the new email.

  Sorry, you cannot change the user name (your email address) on a sync account.

  Set up a new sync account on a portable office/computer with the other Gmail account, but before you who make sure to separate all of your devices to your current synchronization account. Then connect your other devices to the new sync account.

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.

• Hello, I can't install the creative cloud because I asked the administrator password and nobody here knows that the machine that we use a lot. Find out how to reset the password to let me install the program... Thank you!

  Hello, I can't install the creative cloud because I asked the administrator password and nobody here knows that the machine that we use a lot. Find out how to reset the password to let me install the program... Thank you!

  This isn't something to ask an Adobe forum... it is your operating system that requires permissions to install the software

  You need to find someone who has the administrator password to give to you, or install the software for you

• Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• I am a trial user now, but I need to re - download the apps that I use daily. I'll buy the creative cloud now, I have the same problem again.

  I am a trial user now, but I need to re - download the apps that I use daily. I'll buy the creative cloud now, I have the same problem again.

  It says error 16; Please visit: Configuration error. CC, CS

• I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

  It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

  I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

  I tried to get various programs to recognize.  They cannot see the installed media.

  I uninstalled iTunes.

  Please do not give me the answer of cut-and - paste stock; It does not work.

  Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

  Thank you.

  Hello

  Well, if you have tried all the usual bugs try this:

  Make a Restore Point:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ------------------------------------------------

  Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
  continue.

  Reset.

  Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
  could be at stake.

  =====================================

  Here's the answer, just in case there is something you don't have, and I start up and down.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable
  or slight corrosion on the contacts (usually for a laptop) and other issues.
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===========================================

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I change the programs that start automatically when I turn on my computer?

  I have several programs that slow down my departure upward.  I didn't not use programs and would that they won't start does not automatically.

  I have several programs that slow down my departure upward.  I didn't not use programs and would that they won't start does not automatically.

  First of all, note that you should be in * all * the programs that start automatically, not only with those who are in the system tray. Not all the programs auto-start manifesting by an icon in the status bar.

  On each program, you don't want to automatically start, check its Options to see if she has the choice to not start (make sure that you actually choose to not run, not simply a "don't display the icon" option). Many can easily and better be arrested like that. If this does not work, run MSCONFIG from the start. Run the line and on the Startup tab, uncheck the programs that you do not want to automatically start.

  However, if I were you, I wouldn't do this just for the purpose of the minimum number of running programs. Despite what a lot of people tell you, you should be concerned, not with the way * a lot * of these programs you run, but * that *. Some of them can seriously affect the performance, but others have no effect on performance.

  Don't stop all programs to run willy-nilly. What you need to do is to determine what each program is that its value is for you and what the performance cost is running all the time. You can try searching the Internet and ask questions about the details here.

  Once you have this information, you can make a smart informed decision on what you want to keep and what you want to get rid of.

• Re: Satellite A200-23N - I need the program that displays the status of the battery

  Can someone help me?

  I need the program that shows me the status of the battery of the laptop
  My laptop model is Satellite A200-23N.
  Please I need help!

  Hello

  What operating system do you use?
  Usually in the taskbar, it is symbol of power, and if the laptop is running on battery power power move the pointer of the mouse over this symbol and info on the battery power will be shown. You can see how can % of battery power has.

• my c drive shows low disk space, so I searched for the program that holds more memory on drive c. I got to know that this pagefile.sys has 3 GB in the c drive

  Hi, my c drive shows low disk space, so I searched for the program that holds more memory on the c drive. I came to know that pagefile.sys has 3 GB in the c drive, kindly guide me to move the pagefile.sys to another drive.

  Hi jafrin.michel,

  Thanks for posting in the Microsoft community.

  Before you start the troubleshooting steps, I need the information required.

  What version of the windows operating system do you use?

  Method 1:

  If you are using windows 7, I suggest to perform a disk cleanup and verify.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  If you want to move the pagefile.sys to another drive, follow the steps and check out them.

  Follow these steps to move the pagefile.sys to C: drive on D: drive (if you have the drive D :).

  1, write click on my computer and select Properties.

  2, click on the Advanced tab.

  3, click settings under performance menu.

  4, click on the Advanced tab and click on change.

  5, select letter (C :) and "BOLD" No pagefile then click on Set. )

  6, if you want to configure pagefile.sys in, select drive D: drive letter D: and "BOLD" in the custom size or the size of the system managed , then click on Set. It displays a pop-up message click OK.

  7, again click apply and OK OK.

  8, the system you will be asked to reboot, click on Yes.

  9, after rebooting the system, you can see the pagefile.sys will be moved to D:

• No matter what kind of program that I use or what printer I print on, my PC has produced a preview before print screen every time I click on print. Anyone know how to disable this option?

  No matter what kind of program that I use or what printer I print on, my PC has produced a preview before print screen every time I click on print. Anyone know how to disable this option?

  It doesn't seem to be anything the given that this happens no matter what printer print on the printer. Any program, I use the same thing also happens.

  Hello

  Apart from the valubable solutions provided, I suggest that you post your question on the TechNet Forums as it appears, it comes to your work computer.

  Windows XP IT Pro

  Thank you.