Amount of data lost after replacement of disc on Readynas Pro 6

Similar Questions

• Help! All files on disk of data lost after deleting a user account in Windows Vista

  Hello

  I delete a user account on Windows Vista. After the deleted account, I can't access any files stored on my data disc (not c :), how can I access these data again?

  The data are very important to me. Help, please

  ARO

  Alex Ho

  Hello

  Thanks for posting in the Microsoft Community.

  I appreciate that you try to recover the data after the deletion of the user account in Windows Vista.

  Since you've already deleted the user account, you would not be able to recover the data.

  However, you can use any third party to the data recovery software.

  NOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  Reference link:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile

• R12.2.4 data lost after using the dialog Page and return to the calling page. (Help please!)

  Hi team,

  I'm new to OAF and works on a requirement to add some custom validation when the user clicks a button in a seeded standard page.

  The approach I took was to extend the seeded controller object managed this press event button and put my custom logic in the extended controller and substitute the standard controller through customization.

  The standard rate which was pressing the Complete button A Page, the user was taken to the next and epepinee page (Page B) some operations based on records that have been chosen Page A.

  Part of the custom validation requirement that was if some postings were not met, the user must be a pop-up asking if they really wanted to move forward and if they have selected Yes then continue with the seeded standard flow (transition to page B) and if they have NOT selected then just remain on the current page.

  I have used OADialogPage and to do this, in part, the question , I am running into is that when the user selects one or more records using a check box in a region of several record (table) and click the full page and if the validation fails then a modal page and the user made a selection i.e.either Yes or no modal page and when they return to the calling page (ex. Page A), all data (records) they chose previously is lost (the Page is refreshed). Based on what I see on this forum, I suspect it's because after having click Yes on the modal page and then return to the original page the processRequest fires again and the VO data is queried again and has all the parts on the page are lost. Since I am changing the flow in seedlings pages based on the intervention of the user I'm confused as to how this problem can be solved. that is, prevent the page refreshes or preserve the selections that were made before you navigate to modal page. Any help is really appreciated!

  My Code:

  ' Public Sub processFormRequest (OAPageContext oapagecontext, OAWebBean oawebbean)

  ...

  ...

  If (oapagecontext.getParameter ("completeOps")! = null) {}

  ...

  ...

  If (warnCount > 0) {}

  OAException message = new OAException ("not in order...", OAException.WARNING);

  oapagecontext.putDialogMessage (message);

  OAException message = new OAException ("XYZ Violated rule. Do you want to continue? ", OAException.WARNING);

  DialogPage OADialogPage = new OADialogPage (OAException.WARNING, message, null, "","");

  String Yes = oapagecontext.getMessage ("AK", "FWK_TBX_T_YES", null);

  String number = oapagecontext.getMessage ("AK", "FWK_TBX_T_NO", null);

  dialogPage.setOkButtonItemName ("ConYesButton");

  dialogPage.setNoButtonItemName ("ConNoButton");

  dialogPage.setOkButtonToPost (true);

  dialogPage.setNoButtonToPost (true);

  dialogPage.setPostToCallingPage (true);

  dialogPage.setOkButtonLabel (yes);

  dialogPage.setNoButtonLabel (no);

  oapagecontext.redirectToDialogPage (dialogPage);

  }

  If (oapagecontext.getParameter ("ConYesButton")! = null) {}

  Write Yes button Action code

  oapagecontext.putParameter ("completeOps", "Continue");

  }

  If (oapagecontext.getParameter ("ConNoButton")! = null) {}

  Write the code of the Action for the No button

  Dim errormsg = ' rule Violations have occurred. "

  throw new OAException (errormsg);

  }

  super.processFormRequest (oapagecontext, oawebbean);

  }

  I managed to work around this problem by adding a simple control in my controller processRequest method extended to avoid the call to super.processRequest incase lhen control returns to the page once the user has made a selection on the Page of the dialog box

  If ((oapagecontext. (GetParameter ("ConYesButton") == null) & (oapagecontext.getParameter ("ConNoButton") == null)) {}

  super.processRequest (oapagecontext, oawebbean);

  
  

  }

  
  

  Thank you!
  

• Data lost after upgrade to Windows 10

  From Windows 7 to Windows 8, the address book and all the information has been lost. He did not return with Windows 10. A professional computer man could not find.  Help, please.

  Hello

   
  Please contact Microsoft Community.
   
  Please confirm this information to help you better:
   
  1. the application or the e-mail client you use. ?

  2. are you able to access the contacts folder by using the web browser. ?

  3. Apart from the missing contacts, it is able to send and receive emails after upgrade to Windows 10?

  Get back to us with the required information, we will be happy to help you.

   

   

  Kind regards

  Anusha

• Classic BlackBerry BB Classic - all data lost after reboot

  After turning on my classic Blackberry all data had disappeared - even no more e-mail accounts. Just like a reset is complete. Can anyone help?

  This could give a try. If it does not work or solve the problem then I would suggest to contact your carrier to get recovery for BlackBerry for resolution.

  http://www.BlackBerry.com/BTSC/KB36747

• I can the recovery of data lost after sync an external drive?

  original title: restore

  I have e question,

  I have an external HARD drive used with windows I saved e a lot of image in this drive, my problem is that I tried to connect the HDD with anh Macintosh mac ask my if I would like to synchronize the HARD drive, I say yes but FIU seconds I lost the evry thing and drive HARD converted to GPT disk with empty now How can I restore my data to help
  Thanks in advance

  If it's information "life and death" stop using it and take it to a professional.  IY will be very expensive.  If this isn't life or death it chalk up to experience and move on.

• T310 with S300 in RAID 5 - How to rebuild after replacing a disc?

  Got a T310 here with 4x250GB drives configured in RAID 5. Had a disk fails, and the controller signals the RAID as degraded. I replaced the drive with a known good. The S300 automatically rebuilt? I went in the controller menu to make sure that he saw the car, which she did, and I let it sit for awhile, but I do not see that the new drive is part of the table. I tried the hot spare configuration, but it is not picking it up to rebuild the table.

  I'm trying to do it in the controller, because Windows runs very slowly at the moment, and I hope that it is because the table is in a drive. I tried to install open manage, but the system seems to hang when it tries to open the executable file.

  It is the latest version of the OMSA:
  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=6XJTF&FILEID=3449087462&osCode=WS8R2&ProductCode=PowerEdge-T310&LanguageCode=en&CategoryID=SM

  Download the EXE and then run to extract the files. Run C:\Openmanage\Windows\setup.exe, and then add yourservernameorip:1311 to the Intranet of THE area.

  Many things may prevent it from automatically rebuild. It should start to rebuild in a minute to be assigned as a hot spare. If not, the drive can not be suitable as a spare drive (too small, bad type (SAS/SATA/SSD), incompatible (NAS, desktop/laptop, not certified), or if the table has become corrupted. Is what model of drive? You ARE able to define it as a backup, right? If this is not the case, make sure that the drive is not listed on the PD MGMT screen in CTRL-R as "foreigners".

• Send the download link for the software lost after replacing my drive hard please

  Mac Book Pro

  CS4 was purchased on disk

  CS6 Internet upgrade

  Can you please send me a download link?

  Thank you very much.

  Louisa Sherman

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Ink level still shows low after replacing the cartridge in OfficeJet Pro L7680

  88XL black cartridge replaced, still shows low ink but prints out OK.

  Travis_C wrote:

  Hello pikespeakbob

  Did you use XL cartridges in your printer before? According to this article it may simply not be read correctly. I had read the article below, even if that shows a different number of ink.

  The ink low message

  My bad!

  At first I thought it might be the 'electronic device' on the cartridge that was at fault but when I rechecked it against the cartridge I replaced it smelled a bit of light.  I weighed both cartridges on a postal scale and they weighed the oz in 1.9.  It turns out that it was also a used cartridge should I have placed in a container cardboard new cartridge so I thought it was new.  I even found the date that I had written on the cartridge when I initially installed, should have looked more closely.  Detective Conan.

  Thanks for the reply.

• After replacing a lost critical system file, I can now initialize & get online, but I have no sound.

  After replacing a lost critical system file, I can now initialize & get online, but I have no sound. How can I activate the sound back?

  original title:. Its Windows XP problem

  Hi Delno,

  I suggest to check the connection of the wires to the speakers and then follow the steps in the article.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know if that helps.

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• lost webcam after replacing the hard drive

  After replace hard drive can no longer access/find integrated webcam.  How he connected again?

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• All the data disappeared after the installation of updates! Help!

  Hoping someone can help with this
  Last night I installed updates KB961371, 973346 KB and KB 890830 for Vista Home Premium and they seemed to have been settled... my computer turns off fine. But when I started today and connected to my usual user, I got a pop-up message from the tool bar by saying "your user profile was not loaded correctly, you have been logged on with a temporary profile, cnanges do you will be lost when you log out." Check the log of the events for more information or contact your administrator." I then found that all my data was away from all my files (music, photos, Documents, analyses)... everything was gone. I then logged out of my user every day and in my admin to have a snoop around and all the data disappeared from there too. While in admin I also looked in the update section to see if the updates have not been installed correctly, but he said that they had been installed successfully.

  I then rebooted, as I thought that it might help, but everything remained the same.

  After the reboot, I clicked through 'my computer' and hard the news here on the disc wrote I have 89 GB of 147 GB free, which I think is consistent with the amount of data I have stored. This made me think that the data is always there somewhere, but I can't access it at all thanks to my user every day or my administrator.

  As far as I can see, all the programs that I installed myself (such as Skype, open office software for my printer hp) are all present, but some of the shortcuts are out of the office. Also, when opening, they "behave" as newly installed programs. for example: Open Office writer guide me through a license agreement and registration rather than simply open a new document, and also firefox behaved in a way similar "new". Also, on commissioning today (after the installation of update yesterday), the window "welcome center" popped up, as did a window asking to save the "synaptics pointing device.

  In short, the system "behaves like new", remembers none of my settings etc, but it is still a my programs installed and most of all, I can't access any of my data! I have a Toshiba Equium P200-178 (use vista Home premium service pack 1 32-bit), I use AVG anti virus (8.5) and Ad-aware software anti spyware. These are updated every day and I run scans on a regular basis (last analysis aware ad probably about a week ago) so I'm not sure it's associated virus.

  Ask yourself what is this "temporary profile" and how to return to my old and my data! Help, please! Thanks :)

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  Good luck with it.

  Mick Murphy - Microsoft partner

• Satellite U940 - Random BSOD after replacing HARD drive

  Good day ladies and gentlemen!

  I was wondering if I can win some lights here - as I google myself in a bunch of flange on the issue, I have!

  I am a famous computer technician (modest too) and more recently, a client of mine introduced me to a ultrabook Satellite U940 - lovingly with the SSD / HDD Raid 0 configuration running our beloved Windows 8.

  All things according to their entire course - Hitachi hard drive failed (as google tells me is to be expected).

  So, I replace the hard drive by a great little number Western Digital, cloned from Hitachi, sector by sector, and after a significant cajoling with bcdedit and bootrec amount, I could so he could begin our good liked Windows 8.

  However, since then, I have random BSOD, cold boots failed and all sorts of errors.

  I ran all the regular patches - SFC/scannow, chkdsk/r, Windows 8 repair facilities, etc., but it is still volatile jolly.

  Things seem not to be as they were with this Satellite little ol '-before any repair, the peripheral device manager showed two "RAID 0' in the category of hard drives, and since then it shows the individual SSD and the WD HARD drive."

  I've updated the driver for the Intel Rapid Storage at latest on the Toshiba site, but nothing helps - alas!
  The weird part is that if I do a reboot on this little beauty, she starts without any problems, but a start cold after a power off is a completely different question - dummy - spit crashing, dumping, in general!

  If there is a troubleshooting there champion who can destroy my help in this situation, I'd be very impressed and never have if they could provide assistance in this regard.

  Unfortunately Microsoft - are we are all end by using these products of ever-so-pretty Appl?

  Hello

  I read in some discussions here in this forum only after replacing the disk SSD or HARD drive, the RAID configuration is lost and must be rebuilt on a device Windows 8.

  But this can be done very easily, and this can be corrected by an authorized Toshiba because this procedure requires special tools and utilities.

  Unfortunately, it seems to me that you will need to contact the ASP in your country to get this problem resolved :(

• HP Pavilion dv6: System recoovery after replacing the HD because of the disk hard 301 error

  I have problems with the original of my HP Pavilion dv6 PC hard drive portable. I get an alert (SMART disk error 301) every time that I reboot, but I can still load my Windows 7.

  I just bought a new hard drive (SSD SATA3), but I would like to recover my original OS using my license key.

  How can I do? Should I create a partition on the new disk (D, copy the contents of my RECOVERY disc and use Esc + F11 after reboot?) Do I need a recovery CD/DVD? In this case, can I create one of my system?

  Thanks in advance.

  Hello
  
  Drive smart error 301 indicated fall drive hard/failed hard drives
  
  If you have recovery disks, no need for product key, insert the disc after replaced by the new fair SSD & insert the recovery disks to reinstall everything, including the recovery partition.
  
  You can also order HP recovery discs
  
  You must ensure that the size of the SSD is equal to or greater than the size of the previous HARD drive to perform successfully the recovery discs recovery.
  
  If you have not created recovery disks, you can create one - http://support.hp.com/us-en/document/c01867418
  
  Back up all your personal data now first.
  
  Thank you