An error occurred opening the file. Flash can not analyze the document. "

Similar Questions

• Adobe Flash CC issue "an error has occurred opening the file.

  I worked on an animation last night, but when I tried to open the file I get this error that says: "an error has occurred opening the file. I am able to open my other projects flash very well, and I've been looking for a solution to my problem, but not luck.

  If this file is corrupt, you can

  1 rename the fla in rar > open it in winrar > click on repair > rename the rar repaired a fla > try to open it in flash pro.

  2. If this does not work, and you have a working swf file, you can try using a decompiler (for example, soththink) to recreate a working Fla.

  3. in case of failure, you may be able to recover a portion of your assets of fla by unrar'ing the FLA renamed in step 1.

  and save again in the future, with the increase in the version numbers so that this would never entail a significant problem for you in the future.

• I can't download contact sheets to the site ftp continues to receive "an error occurred sending the file: access denied" it used 100% of the time, then about 70% not at all, having to send boards contact my clients. Using Version 6 on Imac.

  I can't download contact sheets to the site ftp continues to receive "an error occurred sending the file: access denied" it used 100% of the time, then about 70% not at all, having to send boards contact my clients. Using Version 6 on Imac. Any suggestions on how to make it work again?

  Hi Dayg,

  Please check your FTP settings in Lightroom.

  Are you able to connect and download using another FTP Client?

  Also try the steps below: -.

  1. from the Web in Lightroom module, click export instead of loading.

  2. save the Gallery to a location that you can find easily (like your desktop).

  3. manually copy the Gallery of his location to save to your FTP server.

  Let us know if that helps.

  Kind regards

  Assani

• vSAN 5.5 U2 - Flash Cache error reading configuration ' reason: an error occurred during the configuration of the host.

  Hosts: DL360 G6, dual quad core, 64 GB of RAM

  Discs: 3 SAS 10K rpm and 2 SSD Spidles.

  I am trying to set up one of the hosts of Read Cache Flash but I get the desciptive never so much and the defenseless error message...

  "Configuration on disk/vmfs/device/disks/naa. < longguid > has failed. "Reason: an error occurred during the configuration of the host.

  I hope that there is a log file I can verify for a more profound description of this lame error message.

  Can someone tell me where I can check on this error?

  Thank you

  Oh. k. so, it is the function of Read Cache (vFRC) Flash of vSphere and nothing to do with VSAN

  check the diaries which is throwing this error.

  ESP: /var/log/hostd.log and log/var/log/vmkernel of corresponding calendar. This will show what is happening here

  You can check the following

  one.

  Check if SSD LUNS are not used / no other partition

  # partedUtil getptbl/vmfs/devices/drives.

  b.

  Also check that the SSD lun on that host are local and eligible for the vflash

  List of devices # esxcli storage vflash

  Thank you

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• Error to connect to the webcast - Windows Media Player cannot play the file because a network error occurred. The server may not be available.

  Original title - PROBLEM WITH WINDOWS MEDIA PLAYER

  I tried to view a technical presentation online and this is the error I received; -what it means and how can I fix it?

  Windows Media Player cannot play the file because a network error occurred. The server may not be available. Check that you are connected to the network and that your proxy settings are correct.

  Hi NinaOwens,

  
  1. are you able to view the same content from a different computer?
  2. you get the error only with a particular file or with the majority of them?
  3. during how long have you had this problem?
  4. did you sons of recent change the computer?

  You can see the links below and check if the proxy settings are correctly performed. Also you can check the other links to verify network connections-
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-proxy-settings-in-Internet-Explorer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

   

  I hope this helps.

• An error occurred during the renewal of the Loopback Pseudo-Interface 1: the system cannot find the specified file. I use ipconfig /renew6.

  Hi all

  I use version 2.1 of WINPE. It works with ipv4 network services.

  I have a "Windows2008R2" machine in my network. In this server I am running a DHCPv6 server in my network. This server is the allocation of IPv6 addresses to all computers that have the OS Vista and Win7, etc (for vista and above).

  But I'm not able to receive the ipv6 address for winpe2.1 pc which is my test pc.

  What are the basic things I should do to receive the IPv6 ip address.

  If you please suggest me that how I can solve this problem.

  I tried to have run the command as "ipconfig /renew6" but he throwed an error

  An error occurred during the renewal of the Loopback Pseudo-Interface 1: the system cannot find the specified file.

  It is very urgent for me. I ask if anyone knows the steps so that the WINPE2.1 system get IPV6 will be appreciated.

  Thank you very much.

  Andy

  http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

  They will help you in the community of Windows Server above with your questions.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: Cannot open the file: 1

  [INFO]              Parsing of the command line options
  [INFO]              Bbwp.properties analysis
  [INFO]              Validation of archive WebWorks
  [INFO]              The analysis of config.xml
  [INFO]              The application of filling source
  [INFO]              Compiling applications WebWorks
  [INFO]              Packaging of the record bar
  Error: Cannot open the file: 1

  Once I rebooted my machine it worked... But I dint knew why this error occurred

• What is confirgaration 213:11 error occurring during the opening of adode software that has already been installed

  What is confirgaration 213:11 error occurring during the opening of adode software that has already been installed

  Hello

  This error appears when you don't have access to read/Wrire in file required to run Software (SlStore)

  > Try to run the Application as administrator (right click on the Adobe application and select run as administrator)

  > See

  Error "license store does not allow writing | Install log | CS5, CS5.5

  > Meanings must solve if it does not reinstall the Application

  Let us know if this helps

  ~ Assani

• Cannot save the document - read-only or opened by another user error occurs when the PDF is opened in Windows Explorer

  Adobe Pro XI - use the operating system to Windows 7 Pro

  When a PDF document is open in Windows Explorer, and pages are added, deleted, ratings, all types of changes, he cannot be saved until the Windows Explorer is completely closed.  If you try to save the document, you receive the error message next - "the document could not be saved.  The file may be read-only, or another user may have his opening.  Please save the document under a different name or in a different folder. «I have confirmed the document is not read only, it is not open by another user, and this is not open many times.»  Once completely, you close Windows Explorer and try to save the document, it saves without problem.

  Are there settings in Adobe Pro XI or Windows that allows you to save documents without closing Windows Explorer first?

  Thanks for any help you can provide.  This error is a frustration because I open all my documents via Windows Explorer.

  Turn off the preview in Windows Explorer.

• Reissue of links a file to an article 'an error occurred during the creation of the article. Missing the capital inflow. »

  Someone had this problem?

  I can't find in any other discussion.

  "An error occurred during the creation of the article. Missing the capital inflow. »

  Sometimes when I create a link to a new file in an article. Folio Builder tries to update the file and he paused by the message.

  It just stays there, and it won't let me cancel the update or do anything else.

  Sound familiar?

  Please, let me know.

  Thank you!

  In most cases, this error message is caused by one or more broken links to the assets of overlays. Select different overlay images in your document and look for a yellow triangle in the overlays Panel.

• ORA-07391: sftopn: fopen error, cannot open the text file.

  Hello
  
  The last 3 days, we get the error in the alert below log.
  
  [ORA-00600: internal error code, arguments: [kmgs_parameter_update_timeout_1], [27091] [] [] [], [], []]
  ORA-27091: unable to queue I/O
  ORA-27072: IO file error
  
  I check as the same partners to it in metalink I found permission to check the directory solution. (DOC ID367619.1)
  I got permission from ORACLE_HOME\dbs $ to 777, but still m making the same mistake.
  
  also I try to recreate spfile so that I try to create pfile first
  
  create pfile from spfile
  
  I get the error below.
  
  ORA-07391: sftopn: fopen error, cannot open the text file.
  
  ls - lrt sp * in the below output shows $ORACLE_HOME
  
  -rwxrwxrwx 1 ora10g 3584 20 September dba10 05:42 < SID > spfile .ora
  
  Help, please.
  
  Thanks in advance

  user8757749 wrote:
  The output of ls - lrt is in the path $ORACLE_HOME\dbs only

  We also have the database version 10.2.0.4 that the spfile even uses everyday cold backup of the database.

  also, I put the 777 permission to the file.

  OK, I guess there will be corruption of the SPFILE as if edited manually or in any other cases too.

  You have a backup of SPFILE? backup of the file PFILE or?

  then starting using this SPFILE, if any backup then start with PFILE and then create SPFILE from PFILE.

  Otherwise, you can copy the contnets of the parameters of the alert log file initialization and paste in the editor and the instance of starutp.

  These are the options.

• Error: "an error occurred saving the file because it could not be created" during the recording of digitized file

  Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.

  I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.

  Hi ameerlakhani,
   
  Try to save the scanned in a different file format and check if it helps fix the problem.
  Follow the steps in this article and check if it helps.
  Using the HP scan Diagnostic Utility
   
  If this is not enough, post your request in the support forum HP for assistance.
  Visit the following link to do the same thing:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

• I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account how can I fix this pleas

  I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account, how can I fix this means if someone knows how to fix teas pleas answer me quickly I have to work

  Logging in as an admin account, then reset the password for the account of the problem.

• Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

  Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

  Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows