An event, a passage of the different event data, erase them old data

Similar Questions

• Windows 8 calendar - identify the different events of the color on the calendar

  Maybe the answer to this is somewhere, but I'm unable to find it.  I like the calendar of Windows 8, but would like to identify the different events of the calendar of different colors, for example a color for birthdays, one color for commercial activities, a single color for the holidays, etc.  How do this without having to create a multitude of different calendars, then sync them all to one.  Thank you!

  Hello

  I woud you check out the articles below that may be useful.

  Application of calendar for Windows: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/calendar-FAQ

  Stay organized with email and calendar

  http://Windows.Microsoft.com/en-in/Windows-8/mail-calendar-app

  Please let us know if you have additional questions about Windows and we will be happy to help you.

• How to have the different path in the campaign for the first user of N who register for an event?

  Hi all

  I have the following scenario for which I am trying to understand the best way to get the desired results.

  A society organizes events in several places and wants to offer widgets for the first 100 registered. We would like the confirmation of registration email (and perhaps the form submit redirect action) to recognize for the first 100 registered that they will receive their gift in the mail shortly.

  Maybe we would also like to use the Cloud2You component to post on the key ring.

  I searched around the documentation and so far it seems, in the program generator, you have a decision stage to search by the number of Contacts in a Contact Group - however when I try to play with the program generator I don't see the option.

  Any help and insight would be appreciated.

  Stone

  Hi Pierre,.

  The only way I was able to satisfy this use case in the past was to create a custom object first with a meter and e-mail address fields. In the custom object have a counter range from 1 to 100. As the first 100 people to register, the tire registration page the next value of the counter (see data card with space for e-mail address) and select it as a value on the registration page, pass it back through form with e-mail custom object. This way you are able to have the first 100 e-mail address to fill.

  Now you can feed these contacts in a program, send them email you have to looking for a value of data card custom 100 by the decision rule object, and if the value is 101 or more, you can send them another type of communication.

  The only reason why I recommend this path, because the main challenge is to keep track of number of contacts in eloqua, and this deffinately has been a path before open API that I have been able to use successfully for the distribution of promotion code.

  I hope this helps.

  Thank you

  Amit Pandya

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• With the help of data contained in an event.

  I'm trying to understand how to use the data of an event to set the selectedIndex of a comboBox control property.  If I hardcode the number 4, as it is in the example below, the function sets the selectedIndex property correctly.  When I run the debugger, (4) data under event.itemRenderer.data.ConstructionPhase.  However, if I try example B or C, Flex builder gives an error... D example gives no error in flex builder but then when run.  Please, how can help I get the value of the event to be used for the function?

  Example has (it works, but may well hard-code the value!) :

  private void fillInForm(event:Event):void {}
  openAddForm();
  addEditItem.label = 'Edit ';
  for (var i: int = 0; i < ConstructionPh.dataProvider.length; i ++) {}

  If (ConstructionPh.dataProvider [i]. ConstructionPhaseId == 4) {}

  ConstructionPh.selectedIndex = i;
  break;
  }

  }
  }

  Example B (Error message in flexbuilder = "" 1119: access of the itemRenderer property possibly not defined through a reference with static type flash.events.Event "")

  private void fillInForm(event:Event):void {}
  openAddForm();
  addEditItem.label = 'Edit ';
  for (var i: int = 0; i < ConstructionPh.dataProvider.length; i ++) {}

  If (ConstructionPh.dataProvider [i]. ConstructionPhaseId == event.itemRenderer.data.ConstructionPhase) {}

  ConstructionPh.selectedIndex = i;
  break;
  }

  }
  }

  Example C (Error message in flexbuilder = "" 1120: access of undefined property itemRenderer ' ")

  private void fillInForm(event:Event):void {}
  openAddForm();
  addEditItem.label = 'Edit ';
  for (var i: int = 0; i < ConstructionPh.dataProvider.length; i ++) {}

  If (ConstructionPh.dataProvider [i]. ConstructionPhaseId == itemRenderer.data.ConstructionPhase) {}

  ConstructionPh.selectedIndex = i;
  break;
  }

  }
  }

  Example D (no error message in flexbuilder, but the following operating... Type Error: Error #1009: cannot access a property or method of a null object reference)

  private void fillInForm(event:Event):void {}
  openAddForm();
  addEditItem.label = 'Edit ';
  for (var i: int = 0; i < ConstructionPh.dataProvider.length; i ++) {}

  If (ConstructionPh.dataProvider [i]. ConstructionPhaseId == data. ConstructionPhase) {}

  ConstructionPh.selectedIndex = i;
  break;
  }

  }
  }

  How can I get the value of the event?  When I run the debugger with a newline at the beginning of the function, it is under event.itemRenderer.data.ConstructionPhase... how are referencing it?

  Thank you very much

  Mark

  Cool. From what I see, you need to find a record in the drop-down list that is based on a

  shared value in the record of DataGrid. So in summary, you're screwed.

  No, no, I'm kidding! It's Friday and I'm looking forward to the weekend. How about you

  will be too, after seeing the solution to your problem!

  Answer: Search through data provider for your ComboBox for the value in the

  The DataGrid SelectedItem. Then set the selectedItem of the ComboBox as a result.

  So the trick is to then assign an ITEM from the dataprovider of the ComboBox

  selectedItem property. Voila! Don't bother with the selectedIndex property and not looping

  necessary.

  Oh and another thing: when you are working with the DataGrid control, you use the

  ListEvent, not the event ol ' ordinary that you were using. The ListEvent contains the

  object selectedItem from the data provider. just what it takes for this method.

  Oh, what? Not quite clear? Ok. Let's get this party started...

  There are two things you have to remember to achieve:
  (1) to find a Collection of table, you create a cursor. Just like a database.
  (2) the Collection of table should be sorted before searching in it. Mandatory!

  OK, here's an example I want you to try. Not knowing what your data looks like, I

  had to pretend, please excuse my laughable attempts of creating classic data

  that could be used in your business.

  Notes:
  (a) sort and find takes time on large data sets. But made a loop,

  which is what you were doing.

  (b) you must return the ComboBox control to its 'home' State after sorting and

  research on the field, otherwise the user will see a different kind

  order each time it opens.

  This example implements everything above. Enjoy!
  //***************************************************
  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
  
      Import mx.events.ListEvent;
  Import mx.collections.ArrayCollection;
  Import mx.collections.SortField;
  Import mx.collections.Sort;
  Import mx.collections.IViewCursor;
         
  Data provider for the ComboBox control:
  [Bindable]
  public var acConstructionPhases:ArrayCollection = new ArrayCollection([)
  {label: 'in progress', data: '1', idx:0},
  {label: "Extended", data: '2', idx:1},
  {label: "on track", data: '3', idx:2},
  {label: 'Cancelled', data: '4', idx:3},
  {label: "Completed", data: '5', idx:4},
  {label: "Beak", data: "6", idx:5},
  ]);
         
  Data provider for the DataGrid control:
  [Bindable]
  public var acEstimatesFixedItems:ArrayCollection = new ArrayCollection([)
  {Function: 'Kitchen remodel', ConstructionPhaseDes: '1'},
  {Function: "Bathroom remodeling", ConstructionPhaseDes: "4"},
  {Function: 'Demolition of the Garage', ConstructionPhaseDes: '5'},
  {Function: 'Landscaping', ConstructionPhaseDes: '2'},
  {Function: 'Replacement of the roof', ConstructionPhaseDes: '6'},
  ]);
                 
  private var cursor: IViewCursor;
  public var sortConstPhaseData:String; Used to determine the sort field
                 
  These function sort ComboBox data provider.
  Nore that the data provider uses the field of 'idx' for one of the kind.
  This allows me to return to the 'natural' order, "housewives."
  I want the values appear in the drop-down list.
  public function sortacConstructionPhases (): void {}
  Sort on the field "data".
  var sortAC:Sort = new Sort();
  sortAC.fields = [SortField ('data') new];
  acConstructionPhases.sort = sortAC;
  acConstructionPhases.refresh ();
  This var records which domain we sorted on:
  sortConstPhaseData = "data";
  }
  public function unsortacConstructionPhases (): void {}
  Sort on the field 'idx '.  BY DEFAULT.
  var sortAC:Sort = new Sort();
  sortAC.fields = [new SortField('idx')];
  acConstructionPhases.sort = sortAC;
  acConstructionPhases.refresh ();
  This var records which domain we sorted on:
  sortConstPhaseData = 'idx ';
  }
  public void syncComboBoxToDataGrid(event:ListEvent):void {}
  Called by clicking on a row of DataGrid.
  First, sort the array of ComboBox (must be made before the cursor

  Search):
  If (sortConstPhaseData! = 'data') {}
  sortacConstructionPhases();
  }
  Get the value of the currently selected item ConstructionPhaseDes:
  var phaseDes:String = event.target.selectedItem.ConstructionPhaseDes;
  Put in the subject:
  var ConstructionPhSearchObject:Object = {data: phaseDes};
  Create a cursor for research on the DataProvider of the ComboBox:
  cursor = acConstructionPhases.createCursor ();
  Search the object in the ComboBox DataProvider:
  var phaseFound:Boolean =

  cursor.findFirst (ConstructionPhSearchObject);
  If (phaseFound) {//If the value was found...
  It is found; the data of the object found at the ConstructionPh

  ComboBox.
  This will ensure that the displayed value corresponds to the selected data.
  var constructionPhFoundObject:Object = cursor.current;
  ConstructionPh.selectedItem = constructionPhFoundObject;
  }
  Now, to return the ComboBox control to its original state "housewives":
  unsortacConstructionPhases();
                      
  }
  private void setComboBoxIndex(event:ListEvent):void {}
  ConstructionPh.selectedItem = event.target.selectedItem;
  trace();
  }
  ]]>
     
         
  dataProvider = "{acConstructionPhases}".
  labelField = "label".
  prompt = "SΘlectionner one...» »
  width = "244".
  dropdownWidth = "200".
  fontWeight = 'normal '.
  x = "158" y = "50" >
             
         
         

  Width = "396".
  itemClick = "syncComboBoxToDataGrid (event)" > "
         
  

  //***************************************************

• event data for the asynchronous timer

  My application uses an asynchronous timer to read analog and digital signals that are then loaded in a thread safe queue. The main part of the application unloads the queue, displays values and updates the locations of graph and also writes data to a file on disk.

  Asynchronous timer runs every 40 millisecs, show various updates run 5 times per second and the data is written to a file every second.

  Among the data elements is an entry SSI of lifting height, which, at this data rate should be increased to 25mm per second, or 1 mm each scan. I get a lot of variations in this reading, ranging from 0.3 mm to 1.7 mm and these variations seem to occur during updates of the display or the data file is written. I thought that using the async timer I would be safe from Windows Update problems, it runs in a separate thread.

  An earlier version used a timer Panel in which I was able to use the event data to show that timer interruptions were indeed affected by the activity of the screen. The async timer event data seem to zeros, whereas the event data of timer Panel that held a version of the hour and the time elapsed since the last interruption of the timer. How can I check that the async timer is interrupted at the right time?

  Reminder timer Asyncronus has the same exact structure of the timers UIR one, except for the first parameter, an integer that in the reminder timer UIR, holds the handle of the Panel the timer while it is reserved in the callback of the asynchronous timer. This means that the eventData parameter holds the information on the time elapsed in th eprogram, passed as pointers to values double. To read this information, you must operate this way:

  totalTime double, timeFromLastTimer;

  totalTime = *(double *) eventData1;      Time to start the program

  timeFromLastTimer = *(double *) eventData2;     The last reminder of timer time

• How to get input on the arbitrary draw event data?

  Hi all

  I'm trying to draw a histogram on an arbitrary parameter (such as the effect of 'Levels'). Part of the draw is good, but I have a problem with the data in the input layer (param [0]).

  All I have to do now is read the entry about the event draw arbitrary data. But there is not the input on the draw event pointer. So I called the PF_CHECKOUT_PARAM() function to get the input data, and it works!

  When I test in AE, I created a layer A, and added some color correction effects to the layer before my effect added A layer. The problem is the input layer that read my effect is not the result of the previous effects that I applied before.

  Has any way to read the latest entry in the arbitrary event data?

  Thank you.

  the result of caching is a smart thing to do, but as you mentioned, when the

  the user sets the controls in a State that AE has already cached the image

  for, any rendering happens, and your user interface crashes on an irrelevant screen.

  (as is the case with 'levels' (or at least was))

  You can use PF_GetCurrentState PF_HasParamChanged during a draw event to

  know if your plug-in State param has changed sine the last call to draw.

  If so you can't, for a new record using PF_OutFlag_FORCE_RERENDER

• question of the event: event ['data']

  The following function is within a class of the YouTube API that the I found Googling.  It manages the state changes copied this function in my application because I need to listen to and consume some of the same events.  My function is triggered at the right times except this ['data'] event throws the following home runtime error.

  ReferenceError: Error #1069: property not found on flash.events.Event data and there is no default value.

  --

  private void onPlayerStateChange(event:Event):void {}

  / / Event.data contains the parameter of the event, which is the new player State

  var stateIndex:Number = event ['data'];

  {switch (stateIndex)}

  case 0: clearInterval don't (this.updateInterval); break;

  case 1: updateInterval = setInterval (function (): void {})

  currentTime = player.getCurrentTime () * 1000;

  }, 500); break;

  box 3: this.duration = this.player.getDuration () * 1000; break;

  }

  this.dispatchEvent (event);

  }

  --
  Thanks for you help,
  VC

  this.loader.content.addEventListener ("onStateChange", onPlayerStateChange);

  The content is of type DisplayObject, but the runtime is loaded a subclass of

  DisplayObject. This object is dispatching onStateChange, is probably a custom

  event with property inside data. However, the Manager is registered with the

  class generic event that works for the custom event extends to the base event

  class.  Your man is to avoid the compilation error by type table

  event syntax ['data'] instead of an event.data object. I don't know what

  event type is the contents of your shipment but it sholud be a data

  property inside, because the one you use now of course didn't. That's why

  the error only at run time and no compilation.

  C

• Problem with the different Labview platform

  Maybe this question should be address to OR.

  I have this library calling a DLL registry. The library aims to convert a movie from hard disk (type *.mcf) file type in image stream and then to show and possibly to save.

  The DLL is designed by the designer of the NAC camera, which is a high speed camera. The code is based on the properties, methods and events of DLL.

  The code works well in Labview 8.6.1, in Labview Labview 12.0f3 11.0.1. Unfortunately the code does not work in 11.0.1f2 of Labview which is one that I develop my applications.

  I'll post the code developed by the Japan of NOR (camera is also designed for the Japan) and the mcf and the DLL file to be saved.

  The code is compiled in 8.6.1.

  Save the dll first, then open the NAC MGF Control_E.vi.

  Eyebrows the mcf file

  Press the Open button

  Drag the images one by one to show the content of the images of the mcf.

  If you want to open under another labview 8.6.1 and then copy the folder and launch a massive compilation under this version can open the top of the page even vi.

  Please, show me what is different for the different versions of labview so in my version does not.

  That you,

  Virginia

  Thank you, Rolf.

  You were right, everything is good now.

  First thing I thought was this pointer, I received as conversion event which I have often noticed will be negative number, the way that I watched. I consider this number as being a pointer to the cluster bitmap info to convert image and I wonder how is it might be negative. I noticed that it was negative any versions of Labview. But it seems there is more than one handler to the bitmap of the converted image info. In fact, I asked the NAC SDK its pointer designer but is a very complex for the information chain and the SDK has no information in this area.

  Thank you very much

  Virginia

• Levels of the different point of view to a PDF form

  Levels of the different point of view to a PDF form: I have a PDF form that requires the intervention of different people. However, I need to hide certain sections of the form to be used only to specific people. How?

  You define the fields to be hidden by default. You can add code to show and unlock these fields by the user to enter a password, but it is a very weak control.

  Another approach is to use the ID of system connection. The only place that acrobat/Reader sees this information is in the identity object and to access this object in a form requires a special encoding because when you open a form it is not initializing the application, an event console. or a batch. You will need to add a special user folder script to each special user or all users to be able to access these data in a form. This may require the assistance of your IT support form.

  The folder level script could be:

  var MyLoginID = identity.loginID;

  You can access the MyLoginID in open a PDF file to get the ID of the connection. You can change the variable name for security reasons.

• How to make a passage from the mouse inactive before a click?

  Hello

  IM new at this request, but I like it a lot!

  My question is how to activate a button with a 'click' or any other action that is the only thing before for example a passage of the mouse becomes active? I would like to make this infographic that gives you the ability to click a button, then a rectangle is displayed, then you hover over the rectangle and the text appears.

  Thanks in advance

  Casper

  I would use animate() for mouseenter and mouseleave events.

  Example here:

  Dropbox - double action btn.zip

• Query regarding different refreshing data from the grid when returned from a workflow

  Hi Experts,

  JDEV version is: 11.1.1.5

  Our application uses dynamic tabs the user interface shell.

  Whenever the user connects, it is taken in A TAB.

  Since the TAB A, the user navigates to TAB B.

  TAB B has a GRID B(table with a few records).

  Column A on TAB B has a hyperlink which, once clicked on will open a stream of different tasks in a different tab.

  Click on the column of hyperlink for the different lines will open different tf (under certain conditions).

  By clicking on the hyperlink, that the method _launchActivity(String title, String taskflowId, boolean newTab) is used, which the TF open in a new tab.

  The user works on the TF (in a new tab) which opened on click of a hyperlink in the column is and click on SAVE.

  Click to save some operation and removeCurrentTab method is called which will close the current tab, and control passes to the first tab (TAB A).

  The problem:

  Once the user tries to click or to return to the TAB B the WHAT GRID B is never updated that we cannot get the descriptor to refresh the data in the grid.

  Any suggestions would be much appreciated.

  Thank you

  Jean Claude

  huh, I thought it was another library in question.

  In all cases, you can use contextual event (when you close the current tab).

  The second option is to navigate to the method executeQuery by code call activities:

  https://blogs.Oracle.com/jdevotnharvest/entry/how-to_navigate_in_bounded_task_flows

• AS3: assigning values to the different words in a string

  Is there a way to locate a word (Group of characters) in a text box or a string and assign different values for them or even add an event listener for them?

  example:

  myText = "a solange once there was a little girl in a red cape";

  
  I want to find the word 'red' and color only in red and add an event listener. Is this possible?

  Of course it works

  You can do

  if(newcolor == 0xff0000){
       // do something for roll over
  } else {
       // do something for roll out
  }
  

• help on event data node

  How do you find help on the various members of the node of event data in a Structure of the event.  For example, 'Time' seems to be a number of seconds after a few references, but I can't find any help about it.  Thanks in advance.

  The help is there, but buried.  Consider an empty event Structure, which looks like this:

  

  Buried using the event Structures is this Note: for more information on the elements of event data, click on the Details link in the case of subjects of class descriptions of the event control, Application componentand VI .  Note the three links (to get help).  Timeout being event pane ID, I clicked on this link to get to the Help Page of Application events, where, under the first registration, Activation of the Application, there is a link to Details .  By clicking on that got this:

  

  who says that time parameter is simply the clock of millisecond corresponding to the time where the event occurred.

  Yes, the information is there, and Yes, Altenbach is true it might be just a little more accessible...

  Bob Schor

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,