Windows 8 calendar - identify the different events of the color on the calendar

Similar Questions

• Windows Vista cannot identify the network wireless secure after reboot, shutdown, standby, idle, screensaver...

  I have a Dell Inspiron 9400 that is about 5 years old.  After almost every stop, restart, sleep, saving screen and idle my wireless connection icon gets a yellow warning triangle and when I open my network and Center sharing there is a red X on the 'plan' and he said: he can't identify the wireless network.  So I have to disconnect and reconnect several times to connect wireless.  There are also 2 PCs cable, 1 PC wireless and 1 laptop Mac wireless connected to the NetGear RangeMax router with no problems.  I tried to update my Broadcom 802.11 g network adapter (version 4.82.28.56 / date 21/06/06), but he says it's the most recent driver.  I use WPA2-PSK authentication with a password for the security of the wireless router.  The only one I know about computers is that when I have a problem I look up on internet forums until I have the solution, and then I followed the instructions.  It has worked so far.  If anyone can help me I would really appreciate it.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  Do this if Windows native drivers claim already updated.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Windows 7 cannot identify the wireless network

  Hello

  I have a Dell Inspiron switch with Windows 7 Home Premium 64-bit. I can't connect to my home network. I've been able to connect for months and the computers and phones of members of my family have no problem. I am able to connect to my school's network and home network no problem my friend.
  He sees the network, tries to identify the network, shows 'Access restricted', then tries to identify it again.
  I tried to delete the network profile, reinstall the drivers (intel wireless 1030), restore the system and manually connecting to the network, all have failed.
  Also I tried disable firewall and antivirus - also did not work.
  Any suggestions?

  Please note that some anti-virus software can never really be 'disabled '.

  You will need to check with firewall / anti virus software and 'allow' full access to your network name 'Wireless', which may also be called SSID.

• Windows live calendar not only show a part of an event in the calendar

  When I open windows live calendar it shows that some of the test registered and this is not on the correct date, but earlier in the week. Found a web site that opens the calendar and shows the full entry but when I save it as a favorite that need me for my calendar live windows that show only part of the inscription. Help thanks!

  Hello

  The question you have posted better suited to the Hotmail calendar support. I recommend you to ask your question in Hotmail Calendar Help Center support.

  Hope the helps of information.

• Windows Live Calendar does not show daily events

  Original title: calendar does not display the daily events

  Windows live calendar shows only a small icon on Sunday.  The events are listed in the details, but he no longer appear on every day.  Tried rebooting, see more, etc.  How can I get the events to show every day again?

  Hi juliemortimer,

  For more specialist on this question help, post your query on the Windows Live Forum.

  Windows Live Forum - http://windowslivehelp.com/product.aspx?productid=15

• Export/save Windows Live Calendar to import into the new Windows Live Calendar

  Hello

  I filled out my windows live calendar with events, now I don't like my e-mail name.  I created a new Windows Live ID, but can't figure out how to transfer my event calendar?  I could save & import my contacts without any problem, any advice?

  Thanks, dave

  http://www.windowslivehelp.com/

  "Welcome to Windows Live Solution Center"

  They will help you with your questions when repost you in the Forums above for Windows Live.

  See you soon.

  Mick Murphy - Microsoft partner

• reminder event in windows live calendar on desktop

  How can I change the settings in windows live calendar on the desktop...

  When I run the new event default settings are callback '5 days' and time am/pm.

  I want to spend the time to 24 hours and I don't want any reminder-how can I do the settings by default when I open a new event? I change it only in windows live calendar via browser, but it is not synchronized with the program.

  screenshot: http://4.bp.blogspot.com/-nLVV9bAAgoo/TWrLAsHNFhI/AAAAAAAAAAs/GHoQtCy4AqM/s1600/Untitled.png

  Thank you.

  Hello bendamti,

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to Windows Live Calendar and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=2

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• identify the selected window of the other

  Hello
  I have a problem with several popup windows.can't identify contextual selected and closed pop up by code.does someone has an idea.i can remove popup that last created but cannot remove the previously created.

  I found the way to identify contextual selected form window rest others like
  Save the event listener to the u of created popup window
  login.addEventListener ("close", removeForm)

  function
  private void removeForm(event:CloseEvent):void {}
  PopUpManager.removePopUp ((event.currentTarget) IFlexDisplayObject);

  }

  If it not clear feel free to send me a private message
  see you soon

• Windows could not start the service on the Local computer Windows event log. Windows 2008 R2 server

  When I try to start the event log service can I have on my server (Windows 2008 R2), I get the following error:

  "Windows didn't start the service on the Local computer Windows event log."

  Error 2: the system cannot find the specified file. »

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

• The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program

  I try to use the Microsoft Office tool that implement an MSI for 64-bit Office 2010 installation file.  The tool works file and creates the msi file.  I get to the tool by going to the x 64-bit folder on the office 2010 installation disc.

  I install a new virtual machine from Windows 7 and tried to use the MSI file to install office 2010 and I get the error:

  "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program"

  If I just click Setup on the office 2010 dvd he moved very well on the same VM window7.

  Does anyone have an idea how do to understand why the windows installer keep fails or what he wants?

  If I click on the msi even on a system with office 2007 is installed, I get the same error.

  Thanks for the help

  jbabe

  Windows Update has nothing to do with the upgrade or installation of Office 2010. Please post future questions in this forum: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error message "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program."

  Original title: cannot install WMP11, update rollup 2

  I'm still on WMP 10 for a reason, and I wanted to connect my PC with 360 videos. I downloaded the update, but he told me to go get the Update Rollup 2 or something, so I tried to install it and he told me that I needed to go get the .NET framework 1.1 and .NET framework 1.1 SP1. I went to download them and install them, but he tells me that "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program".

  I Googled, tried of all kinds, uninstalled SP3 and tried and nothing.

  Hi xelliotx,
   
  I suggest that you follow these steps.
   
  Step 1:
   
  First of all, download and install .net Framework Cleanup Tool to remove selected versions of the .NET Framework on your computer.
   
  Step 2:
   
  Manually install the versions of Microsoft .NET Framework below:
   
  Microsoft .NET Framework Version 1.1 redistributable package
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en
   
  Microsoft .NET Framework 1.1 Service Pack 1
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en
  Once this installation is complete, try to install the other required software and check.
   
  See also:
   
  Error message when you install an update for .NET Framework 1.1 or the .NET Framework 1.0: "the upgrade patch cannot be installed by the Windows Installer service.
  http://support.Microsoft.com/kb/940332
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

  How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

  How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files