Problem with the different Labview platform

Similar Questions

• Problem with the different variables of flight activity

  Hello world
  
  I have a flight activity, inside I want to get the values of calling a procedure.
  
  My plsql procedure takes 2 arguments and returns a name.
  ARG 1 = my process of input value (common to all branches in flight)
  ARG 2 = FlowN_1_Variable (index value of flight)
  
  Create the branches get on flight, depends on my value of IO process. (for example: treat the entry = 3, 3 agencies are created in flight)
  1st branch-> arg 1 = 3 (my entry process), arg 2 = 1 (FlowN_1_Variable)
  2nd branch-> arg arg 2 = 2, 1 = 3
  Branch of the 3rd-> arg arg 2 = 3, 1 = 3
  
  Inside of each branch that I invoke (Invoke activity) my pl/sql procedure passing 2 arguments (above) @ execution, the question here is
  
  all branches take the first values of the branch as arguments, as
  
  1st branch-> arg 1 = 3 (my entry process), arg 2 = 1 (FlowN_1_Variable)
  2nd branch-> arg arg 2 = 1, 1 = 3 but he supposed to get arg2 have 2
  Branch of the 3rd-> 1 3, 2 = 1 arg = arg he supposed to get arg2 have 3
  
  It comes only with actiivty Invoke, but if I print the values before or after the Invoke activity, values are correct, as I hoped (different values are coming).
  I'm passing values to flight thro' local variable within my reach.
  
  Please guide me.
  
  
  Thank you
  VIKI

  Define a scope in your flight. In this sope define local variables. This brand will be sure that you don't joke the variables.

  Marc

• problem with the on LABVIEW DAQ assistant.

  I have a LABVIEW student edition. I needed to use NI USB-6008 to acquire the signal, but I do not see "DAQ Assistant" on the Express > entry in the block diagram pane anytime, I opened a new VI. Any help will be appreciated.

  Thank you.

  
  

• LabVIEW 2010 FPGA: problem with the mean and the variance Subvi

  The Subvi 'Average, Variance and standard deviation' seems to not work properly. The calculation of the average value is ok but std and variance are bad and the results change with representation in an unexpected way. Everyone knows about this problem? Is there a problem with the use of this function?

  Thank you

  Andrea

  Hello Andrea,

  Here is a test for the configuration of your VI (entered I16, 16 samples), saved in LabVIEW 2010 SP1 and the new Subvi. It is relatively simple to adapt it to other configurations, but it does not reconfigure several nodes and constants on the diagram. Let me know if it will work for you.

  Kind regards

  Jim

• Problems with the resource of labview execution 2 visa

  I use two loops in a labview code all-in - connects to a motor controller and other is used to connect to a multimeter agilent. As soon as I run this VI, the loop to connect to the controller stop working and only used to configure agilent machine works. If I remove the second loop (connecting to the computer of agilent), the code works fine. I guess it's a problem with the execution priority. Could you please review the attached code and let me know any problems with it.

  COM1 and Com3 share an interruption.

  Go to the BIOS of the computer and set the port to Com3 to the Com2 port, then they will be on their own interrupt and see if that helps.

  FYI

  COM1 and Com3 share IRQ3

  COM2 and Com4 share IRQ4

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• NO - problem with the service

  I am from INDIA.

  I bought an iPhone 6 s new mobile Hong Kong a licensed salesperson (mobile fortress).

  When I bring to the India and put on my country sim (vodafone) to my laptop, everything works, but the network does not connect.

  "In settings > about I see vodafone, but when I see the carrier" is not connected, I tried many solutions online.

  I tried:

  1. all parameters (network... so on) and the software is up to date.

  2 tried selecting the network, but to the carrier, it does not show the available network.

  3. I tried the complete reset of the phone 2-3 times.

  4. I tried to change the apple ID.

  I tried many things, my phone works, but could not solve the network. Cannot make calls or find networks in my I phone.

  Someone can help me. When I went to ask local sales assistance, that's the problem with the change in the country, and they said that it will be free of charge on 18000INR.

  Please someone help me.

  Thanks in advance.

  Hi a.a,.

  Welcome to the communities of Apple Support! I'm sorry to hear that you experience these symptoms with your new iPhone 6 s. I'm a bit ambiguous on your specific configuration or what you see, but you can check that the phone is not locked on the original support (if the phone was sold to any kind of discounts or subsidized rate, it is most likely locked carrier). You can find the information described in the following article useful:

  How to unlock your iPhone for use with another carrier - Apple Support

  You may also be aware that different iPhone models are sold in different regions and countries and can support only specific carriers in these regions, as shown here:

  iPhone - country view with LTE - Apple networks support

  Concerning

• Problem with the volume on Satellite Z30 control - A

  Hello

  I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

  See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

  Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

  If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

  I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

  I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

  Any idea?

  Thank you very much

  PHILIPPE

  Hello

  According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
  That's why the Realtek HD audio Manager software should be available in the control panel.

  Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

  In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
  This software provides audio improvements in your computer.

  To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problem with the Conexant HDAudio after installing x 86 Vista SP1

  I didn't want to start a new thread, but it seems that my problem is quite unique.
  
  When the first x 86 Vista install my speakers/headphones worked great. After Vista SP1 installed, my speakers/headphones went silent, but the pilot was still there and working properly. I uninstalled the driver and let Windows automatically install a different driver. (No Rollback was available) I could get the sound from my speakers. Speakers are the only thing that works if I plug into the headphone jack or not.

  When connected to the plug headphones I have test the headphones feature in playback devices and receive nothing in the helmet.
  
  Drivers of HP support only cut my speakers while doing my reading helmet camera disappear. Even with the updated driver.
  
  I like to use it as a TV computer and would like the sound of the TV via the headphone jack.
  
  I searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
  
  HP pavilion dv6748us

  Conexant Audio
  
  Hardware ID:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF & REV_1000

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF

  Have encountered problems with the card drivers its me on vista & 7 even when driver installation correct support downloaded installers.

  Only solution I found was to download a range of versions of different driver bought research google & trials, tedious but sometimes only way to get the result.

  If you uninstall the driver & restart it installs a generic driver audio Conexant or Windows!

  I also use my laptop with TV & hifi so work taken audio is a must (card input jack usb audio can be an option if)

  Also never rule out the fault of Council helmet as have a Pavilion & after that OS installed on a new drive HARD had no audio for headphones, pilot presumed linked, but after fiddling fuond twist got jack sound, turned Ribbon glued on card Board failed.

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!