help on event data node

Similar Questions

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• question of the event: event ['data']

  The following function is within a class of the YouTube API that the I found Googling.  It manages the state changes copied this function in my application because I need to listen to and consume some of the same events.  My function is triggered at the right times except this ['data'] event throws the following home runtime error.

  ReferenceError: Error #1069: property not found on flash.events.Event data and there is no default value.

  --

  private void onPlayerStateChange(event:Event):void {}

  / / Event.data contains the parameter of the event, which is the new player State

  var stateIndex:Number = event ['data'];

  {switch (stateIndex)}

  case 0: clearInterval don't (this.updateInterval); break;

  case 1: updateInterval = setInterval (function (): void {})

  currentTime = player.getCurrentTime () * 1000;

  }, 500); break;

  box 3: this.duration = this.player.getDuration () * 1000; break;

  }

  this.dispatchEvent (event);

  }

  --
  Thanks for you help,
  VC

  this.loader.content.addEventListener ("onStateChange", onPlayerStateChange);

  The content is of type DisplayObject, but the runtime is loaded a subclass of

  DisplayObject. This object is dispatching onStateChange, is probably a custom

  event with property inside data. However, the Manager is registered with the

  class generic event that works for the custom event extends to the base event

  class.  Your man is to avoid the compilation error by type table

  event syntax ['data'] instead of an event.data object. I don't know what

  event type is the contents of your shipment but it sholud be a data

  property inside, because the one you use now of course didn't. That's why

  the error only at run time and no compilation.

  C

• event data for the asynchronous timer

  My application uses an asynchronous timer to read analog and digital signals that are then loaded in a thread safe queue. The main part of the application unloads the queue, displays values and updates the locations of graph and also writes data to a file on disk.

  Asynchronous timer runs every 40 millisecs, show various updates run 5 times per second and the data is written to a file every second.

  Among the data elements is an entry SSI of lifting height, which, at this data rate should be increased to 25mm per second, or 1 mm each scan. I get a lot of variations in this reading, ranging from 0.3 mm to 1.7 mm and these variations seem to occur during updates of the display or the data file is written. I thought that using the async timer I would be safe from Windows Update problems, it runs in a separate thread.

  An earlier version used a timer Panel in which I was able to use the event data to show that timer interruptions were indeed affected by the activity of the screen. The async timer event data seem to zeros, whereas the event data of timer Panel that held a version of the hour and the time elapsed since the last interruption of the timer. How can I check that the async timer is interrupted at the right time?

  Reminder timer Asyncronus has the same exact structure of the timers UIR one, except for the first parameter, an integer that in the reminder timer UIR, holds the handle of the Panel the timer while it is reserved in the callback of the asynchronous timer. This means that the eventData parameter holds the information on the time elapsed in th eprogram, passed as pointers to values double. To read this information, you must operate this way:

  totalTime double, timeFromLastTimer;

  totalTime = *(double *) eventData1;      Time to start the program

  timeFromLastTimer = *(double *) eventData2;     The last reminder of timer time

• Leak memory in real time caused by VISA Read and timed loop of data nodes? Is not supposed.

  In collaboration with LV 8.2.1 in real time to develop applications that monitor or emulate computers on bus RS-422.   The following screenshots have been taken an application that monitors a transmission of 200 Hz.  After a few hours, the PXI station would break a range impressive messages angry... most involving something about memory loss.  After much hair pulling and passing money, my partner has discovered while looking at the available memory on the controller of loss of memory occurred at each loop containing a VISA read and propagation of error using the data nodes (see Leak.jpg of memory).  He concluded that if he went to the propagation of the error to the regular old shift registers, then the available memory was rock-solid.  (has the Leak.jpg of No memory)

  Any ideas of what could be the cause?  Do you see not any problem with the way that we code these kinds of loops?  We always strive to optimize the way in which we use the memory on our urgent requests and VISA readings and DAQmx bed give us the heartache more than ever, we are able to allocate memory for these screws some tips?

  Dan Marlow

  GDLS

  Hi thisisnotadream,

  This problem has been reported, and you seem to be exactly reproduce the conditions required to see this problem. This was reported to R & D (# 134314) for further investigations. There are several possible solutions, of which one is the one you have already found the wiring error directly in the loop. Other situations which give rise to no memory leak are:

  1 if the bytes of the property node port is not there and has read lies in each iteration and time-outs resulting are ignored.

  2. If the structure of the deal is gone and just blindly check the bytes to the port and read each iteration.

  3. If the timed loop is transformed into a while loop.

  Thanks for the comments!

  Kind regards

  Stephen S.

• Help to extract data Clob to a column in a table that has several lines in a table

  Help to extract data Clob to a column in a table that has several lines in a table

  It works for only the first line

  CREATE or REPLACE DIRECTORY XMLDIR AS ' / orabackups';

  Grant read, write on DIRECTORY XMLDIR to the public;

  () dbms_xslprocessor.clob2file

  beef in CLOB,

  XMLDIR IN VARCHAR2,

  "testfile2.txt" IN VARCHAR2);

  DECLARE

  buf CLOB.

  BEGIN

  SELECT H15_DOC

  IN buf

  OF H15TEST. H15_STAGE

  where rownum = 1;

  dbms_xslprocessor.clob2file (buf, 'XMLDIR', 'testfile2.txt');

  END;

  /

  -This error code

  CREATE or REPLACE DIRECTORY XMLDIR AS ' / orabackups';

  Grant read, write on DIRECTORY XMLDIR to the public;

  () dbms_xslprocessor.clob2file

  XData in CLOB,

  XMLDIR IN VARCHAR2,

  "testfile2.txt" IN VARCHAR2,

  CSID in NUMBER: = 0);

  DECLARE

  CURSOR xmlmycur IS SELECT H15_DOC

  OF H15TEST. H15_STAGE

  where rownum = 102140;

  l_clob CLOB.

  XData CLOB.

  BEGIN

  DBMS_LOB.CREATETEMPORARY (l_clob, true);

  DBMS_LOB.CREATETEMPORARY (xdata, true);

  OPEN xmlmycur.

  LOOP

  SEEK xmlmycur INTO xdata;

  dbms_xslprocessor.clob2file (xdata, 'XMLDIR', 'testfile2.txt');

  EXIT WHEN xmlmycur % notfound;

  END LOOP;

  CLOSE Xmlmycur;

  END;

  /

  ORA-21560: 3 argument is null, invalid or out of range

  ORA-06512: at "SYS." DBMS_LOB", line 991

  ORA-06512: at "XDB". DBMS_XSLPROCESSOR', line 324

  ORA-06512: at line 15 level

  FYI, it seems that the file being created will exceed 5 gig

  Yes, it is a known issue with DBMS_XSLPROCESSOR.clob2file with big files.

  Here is a slightly modified version of the code that I posted earlier, fixing WRITE_ERROR except:

  DECLARE

  v_file utl_file.file_type;

  -write a unique to clob

  procedure write_clob (p_content in clob) is

  v_buffer varchar2 (32767).

  V_POSITION pls_integer: = 1;

  v_amount pls_integer: = 32767;

  Start

  loop

  Start

  DBMS_LOB. Read (p_content, v_amount, v_position, v_buffer);

  exception

  When no_data_found then exit;

  end;

  UTL_FILE.put_raw (v_file, utl_raw.cast_to_raw (v_buffer), true);

  V_POSITION: = v_position + v_amount;

  end loop;

  end;

  BEGIN

  -Open the file

  v_file: = utl_file.fopen ('TEST_DIR', 'testfile2.txt', 'wb', 32767);

  -loops through the lines

  for r in)

  Select h15_doc

  of h15test.h15_stage

  )

  loop

  write_clob (r.h15_doc);

  end loop;

  UTL_FILE.fclose (v_file);

  END;

  /

• What is the rule of the data node good assign locator?

  Hello

  We found that the same data node assigned sqlfire Locator (we have 5 physical machines, configured to 3 knots for each). Situation and Test scenario is as follows

  1A started 8 test clients JVM, each with 125 son. (Stress Test)

  2. most of the requests has been assigned to the 3rd physical machine on nodes of the 1st or the 2nd.

  2. data re - balance->-> always repeat the same situation.

  We want to know what rules to assign the node of reference? Thank you very much!

  Nuer.

  Hi Nuer,.

  Once you have started the server, you can connect using JMX to see most of the attributes that are seen in VSD. For example using jconsole, you can connect to a server and see the stats - connection stats are under com.vmware.sqlfire.internal-> NetworkServer (also the example of jmxmonitor packed in the examples/jmxmonitor can be changed to stats monitor selected according to needs). You can also start the agent SQLFire JMX to see all members, such as mentioned in documents: using a SQLFire Agent of JMX vFabric

  Felicia

• After Effects CS6 help? transfer data from tool rotobrush 1080 p to resolution 4 k

  After Effects CS6 help? transfer data from tool rotobrush 1080 p to resolution 4 k

  You cannot transfer the data. At best you can return on a mast and apply it to the plus-res images, but of course there will be artifacts. you really shouldn't waste tiem and simply do and redo the roto.

  Mylenium

• How to get input on the arbitrary draw event data?

  Hi all

  I'm trying to draw a histogram on an arbitrary parameter (such as the effect of 'Levels'). Part of the draw is good, but I have a problem with the data in the input layer (param [0]).

  All I have to do now is read the entry about the event draw arbitrary data. But there is not the input on the draw event pointer. So I called the PF_CHECKOUT_PARAM() function to get the input data, and it works!

  When I test in AE, I created a layer A, and added some color correction effects to the layer before my effect added A layer. The problem is the input layer that read my effect is not the result of the previous effects that I applied before.

  Has any way to read the latest entry in the arbitrary event data?

  Thank you.

  the result of caching is a smart thing to do, but as you mentioned, when the

  the user sets the controls in a State that AE has already cached the image

  for, any rendering happens, and your user interface crashes on an irrelevant screen.

  (as is the case with 'levels' (or at least was))

  You can use PF_GetCurrentState PF_HasParamChanged during a draw event to

  know if your plug-in State param has changed sine the last call to draw.

  If so you can't, for a new record using PF_OutFlag_FORCE_RERENDER

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Recall of NewMenuItem() events data

  Hello

  I can't pass a string to the callback by using NewMenuItem();

  I am able to receive the 'Menu Item Id' correctly in the callback function, but 'event reminder data' is not correctly passed to the callback function. I would like to pass a string as "event reminder data."   A little help please?

  Thank you!

  SINNAS

  With the help of pointers can be tricky that their content could be more invalid later when you want to use them.

  In your case, Ini_GetPointerToRawString returns a pointer to an internal memory area that is not permanent: as you can read by using the function:

  The address of the string will be valid until the next call to Ini_GetPointerToString, Ini_GetStringCopy, Ini_GetStringIntoBuffer, Ini_GetPointerToRawString, Ini_GetRawStringCopy, or Ini_GetRawStringIntoBuffer.

  (highlight is mine)

  In other words, if you call the indicated functions your pointer no longer invalid.

  I guess that it is even more true if you call Ini_Dispose when you are finished reading the. INI file.

  What you need to do is to get a copy of the string with Ini_GetRawStringCopy in a static or dynamic string and pass the address of this channel to NewMenuItem.

• Help needed to validate node parameter

  Hi Denzz,

  I need help on a validation parameter I need to assign a hierarchical level, here is the scenario.

  I have a property definition Custom.Property1 that has a level of global node property, defined property type and type of data as associated nodes.

  and this property is available to all level of my hierarchy that I, e LEF & sheet level, but I want to trigger a validation such that it does not have a value for this property (custom.propert1) entry at the branch level.

  the user should be able to assign a value to this property only a level sheet, when a user tries to assign values to the branch level it fails validation.

  
  

  Can you please advise with the validation class and the parameter should be assigned.

  
  

  Thanks in advance

  Madhabika
  

  Hi Madhu,

  Try this logic in a validation of type formula and see if it works.

  If (PropValue (Core.Leaf), true, not (IsDefinedPropVal (Custom.Property1, ABBREV (()))

  Thank you

  Denzz

• Help with a date field script

  Sorry if this is a repeat. I was interrupted and found that my browser crashed when I'm new so I don't know if the question arises.

  I need a script for a date (mm/dd/yyyy) field where the user can fill only a date that is between 12/31/1899 and the current date (no matter what the date when the form is open). I'm getting to write this but I could not with this one. Any help would be greatly appreciated.

  Thank you!

  I have a feeling that I already answered this question some time ago... Anyway, you can use this code as a script custom validation of the field:

  var minDate = util.scand("mm/dd/yyyy", "12/31/1899");
  var maxDate = new Date();
  event.rc = true;
  if (event.value) {
      var d = util.scand("mm/dd/yyyy", event.value);
      if (dmaxDate) {
          app.alert("Error! The entered date must be between " + util.printd("mm/dd/yyyy", minDate) + " and " + util.printd("mm/dd/yyyy", maxDate));
          event.rc = false;
      }
  }
  

• Drag and drop events/data Question

  I'm dragging one datagrid to another line. When dumped the second grid that I want to run a query that returns more detailed data on the object to move. I created the following function to try to capture a specific part of the data of the object to drop I can then proceed to a .cfc for treatment.
  
  private void dragDrop_handler(event:DragEvent):void {}
  var myDragSource:DragSource = event.dragSource;
  var myStatus:String = String (myDragSource.dataForFormat ('Status'));
  Alert.Show (myStatus);
  }
  
  This is the function call in my second grid: dragDrop = "dragDrop_handler (event)" "
  
  The alert indicates a value 'null '. How can I capture the value of the 'Status' field that has been ignored on my second grid? If it makes a difference that the dragdrop object created flex. I did not create an object custom dragdrop.
  
  Thanks for the help with this.
  
  Mark F
  

  Atta,

  It's great. I dance all around him, but just couldn't. Thank you.

  Mark

• Touch iPhone 5s does not not needing help for the data on it.

  iPhone 5 s (iOS 9) I have blue and red lines on the screen and the touch does not work at all, but the phone still works as usual outside the lines and contactless (voice on don't work/Siri as other items said worked, I do not have wifi for Siri). What I want is the data on the phone, I have a macbook pro (OS X 10.11) a fix would be better, but all I need is the data. I have icloud activated, but it was defective on my phone so don't know if I had a full backup and would like to know how to check. I have a form of computer backup about 2 months ago, but wanted all the pictures and data since then.

  At the back for up to my pc, I need is to unlock my phone, so any help will be appreciated.

  Thank you

  If connect to iTunes and perform a full backup

  And also connect on iCloud & see you backup recently