An event cannot be on the threshold of voltage

Similar Questions

• Contextual table of events cannot exist in the Subscriber page fragment? 11.1.2.3 jdev

  Hello:
  
  About contextual events, all of the examples I've seen always have plan contextual event exists in the page that contains the regions that wish to communicate.
  
  A contextual event table can exist in the page subscribed instead fragment? It seems that the IDE does not support this.
  
  Example:
  
  Page 1 is a Page in the ADF
  FragA is a page fragment in TaskflowA
  FragB is a page fragment in TaskflowB
  
  TaskflowA and TaskflowB are dropped on Page1 as a region
  
  
  When the plan contextual event exists in Page1, everything seems to work ok. FragA may contact FragB.
  
  The contextual events table can be moved to FragB? While contextual events are concerned, Page1 does not...
  
  Is this possible? Do I have to just configure the contextual event card through the window of the structure?
  
  Thank you very much...

  Hello

  If you delete page 1 then you will not be able to see the events of FragA.

  However, page 1 are not necessarily a jspx or jsf, one Fragment of Page on which you put TaskFlowA and TaskFlowB as a region.

  You can try creating the event as *.

  You can check the forum where Frank helped if this can help as well for you.
  ADF contextual event

  Or you can check
  http://middlewarebylink.WordPress.com/2012/11/28/communication-between-regions-without-contextual-events-3/

  Or pass the parameter of workflow and control using the Condition of refresh.

  Thank you
  JIT

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error code: 0 x 80041003 in Event Viewer. Events cannot be delivered through this filter until the problem is resolved

  Original title: - what the heck is - this?

  Can someone tell me what this means - in English?

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I get this topic once per hour in my diary of events 'Application '.  The Source is: Microsoft-Windows-WMI and the event number is: 10

  Every word is understandable and I know what they mean, but how they are threaded and beat me to the syntax.

  Bill

  Thanks for the reply, Gerry.  I'm no stranger to computer, having started in 1962 in the Navy for 20 years.  The HD is fine.  I used the Hitachi software testing to verify this.  RAM is also fine after running MEMTest for about 17 hours.  CHKDSK shows up at all no error.

  I agree it could be caused by a hardware fault and looking for that I ran some tension and trials of O-scope on the motherboard.  The only discrepancy I found was Aida64 Pro told me that the 3.3V rail was only 1.75 v.  My DS was told that the rail was 3.327.  This led to the conclusion that maybe the sensor was messed up.  I have an almost identical computer with a motherboard in the same series and Aida reports that rail even as 3.319v.  So, I think that the motherboard may be offset slightly.

  The re - install is an easier way to remove a large number of applications I just didn't need more and had not touched in over a year.  Revo even would have struggled to clear the registry after such massive uninstall.

  I found that the results from a command prompt is quite easy if you issue the command once, read the results on the screen, and then do it again but to redirect the output to a text file ("' do_whatever > test_output.txt '").  All you have to do is cop0y and paste a post.

  This re - install and the subsequent installation of SP2, seems to have solved the error of the event: for now.

  Bill

• -Event ID: 10 error 0 x 80041003. Events cannot be delivered through this filter until the problem is corrected. »

  Title: event id 10 original

  my PC (Vista Home premium SP2, 2 GB of Ram) is suddenly restart and get a blue screen. What can I do to fix this error? It is after 2 weeks after reinstalling windows.

  Here is the error message:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be

  sent through the filter until the problem is resolved.

  -

  -

  10

  0

  2

  0

  0

  0 x 80000000000000

  2365

  Application

  Lory-PC

  -

  ./root/CIMV2

  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99

  0 x 80041003

  Hello

  1. Faced with this issue specific request?

  Try the methods provided below and check if the problem persists.

  Method 1:

  This problem occurs if the WMI filter is accessible without the necessary permissions.

  To resolve this problem, run a script to stop the event ID 10 messages.

  You can check the link below to solve the problem.

  10 the event ID is logged in the application log after you install Windows Vista Service Pack 1 or Windows Server 2008

  http://support.Microsoft.com/kb/950375

  Method 2:

  You can try to perform a startup repair if the system still hangs after trying this article.

  Startup Repair will try to repair startup issues in Windows Vista. To run the Startup Repair tool, follow these steps:

  (a) Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.

  Note

  When you receive the prompt press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.

  (b) select your language setting, and then click Next.

  (c) select repair your computer.

  (d) select the installation of Windows Vista to be repaired, and then click Next.

  (e) under System Recovery Options, select the Startup Repair tool, and then press ENTER.

   

  Note

  If the repair process detects a problem starting in Windows Vista, it will run Startup Repair to automatically fix problems. If this happens, click Cancel, and then click view the advanced management and system recovery.

  (f) click Finish when the Startup Repair tool is completed.

  (g) under System Recovery Options, click on restart.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3:

  I also suggest you to run memory diagnostic tool to check if the RAM is good.

  To run the Windows Memory Diagnostic tool

  (a) click Start, click programs principally made and then expand accessories.

  (b) right click on command prompt and select run high on the shortcut menu.

  (c) at the command prompt, type mdsched.exe. If you are prompted, allow the action. You can choose to restart the computer and run the tool immediately or schedule the tool to run at the next reboot.

  (d) the Windows Memory Diagnostic runs automatically after the computer restarts. Windows Memory Diagnostic allows you to choose among three suites of tests of varying rigour.

• Event 10, WMI and error 0 x 80041003, events cannot be delivered through this filter until the issue is resolved.

  Original title: that the error of the Devil: the 10, WMI event

  Log name: Application
  Source: Microsoft-Windows-WMI
  Date: 22/02/2013 20:23:43
  Event ID: 10
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: INTL
  Description:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      10
      0
      2
      0
      0
      0 x 80000000000000
     
      2515
     
     
      Application
      INTL
     
   
   
      ./root/CIMV2
      SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
      0 x 80041003
   
  

  Anyone know what the h___ that's it?

  Hi Al Adams,.

  Thanks for posting your question in the Microsoft Community Forum.

  Based on the information, you receive the event 10, WMI and error 0 x 80041003 on Windows 7 computer.

  It would be useful that you can answer these questions to help you best.

  1. when exactly you receive the error messages?

  2. you remember changes to the computer before the show?

  This problem occurs if the WMI filter is accessible without the necessary permissions. To resolve this problem, refer to the article and try the steps:

  10 event ID is logged in the application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Structures of the event, radio buttons and the property disable node

  Hello

  I have a very simple VI intended to simulate what I'm trying to accomplish in my program... in fact, when the 3rd option button is selected, I want the text box is disabled and grayed out.  Instead, the case of the event seems to perform the action on the * next * the iteration of the loop.  Can someone tell what I am doing wrong?

  Thank you!

  The terminal of the radio control is inside the case of the discipline concerned.

  (.. .or you can read the new value from the data event [NewVal] node instead if you need the Terminal also).

  Currently, it is read immediately and the value placed in the tunnel. When the event is triggered, the expired value is read from the tunnel.

  Once you pass the terminal in case of the event, it reads only after that the value has changed, and you get the current value.

  Also:

  • You also need an event for the button stop, otherwise the VI cannot be stopped easily.
  
  
  • You have the same property node in any of the structure of the case. Put it down after the structure of the case and one is enough.
  
  
  • Things that are different are inside the structure of the case.
  
  
  • You can combine the cases that are the same (not the default)
  
  
  • You can remove the case of timeout.

• Event case + while loop (the controls inside the loop will not be updated)

  Ok. I don't know what I'm doing wrong.

  But when I press Start, I can't move the slider control.

  All the obvious errors here?

  Bob123456 wrote:

  But when I press Start, I can't move the slider control.

  Your event is set to lock the front until the end of the event. This means that you are in a bind, because the event cannot be completed until the button is pressed, which can happen because the FP is locked.

  Quick "bandaid fix" would be to uncheck this option in the configuration of the event. Not recommended!

  You should never place interactive code within the structures of the event. Restructure your code accordingly. See state machines, for example.

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• Windows 7 Edition home premium error "Windows cannot connect to the Group Policy client service."

  Original title: guest for Windows 7 Home Premium account

  Hi all

  I would like to aid which has had to face the problem below and how it was fixed.

  I have Window 7 Edition home premium and created a guest account with normal privileges that is turned on but cannot access with the error "Windows could not connect to the Group Policy client service" I think that the main problem is related to a policy because when put on the account to administer it in pop, error message says 'Cannot connect to a windows service' Please check group policy log.

  Thank you very much in advance

  Hello

  Thank you for your time and effort to get back to us, and I apologize for the delay in responding.

  Method 1 step number d makes reference to the present Details tab on the event viewer, where you can get the details of the error. First, search for the error which will be something like Windows cannot process extension Client Strategy Group-side and click on the error and then click the Details tab and make a note of the GUID (Globally Unique Identifier) for the extension defective client-side. For reference, see the screenshot:

  

  Now come to step f number , it indicates the location of the Group Policy Extensions so that you can check if the extensions shown in the case log and the Registry Editor extension have a difference. The path of the GPExtension is HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions. For reference, see the screenshot:

  

  Let us know if the steps are clear to understand now. If this isn't the case, we will be happy to help you further.

  Thank you.

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Problems related to the events active Blackberry as the call.

  Hi people, I have a few questions about the device especially for Blackberry Storm Blackberry app. I'm quite a beginner and do not know much about these issues. I would appreciate if someone could look on this and provide their valuable opinion. Here are the following:

  1. I'm developing an application in which I need to super - impose the currently active event. I mean, say my unit received an e-mail or a text Message during a call, so it is possible to display this message or body on the same screen the call if email is still active? I read somewhere that super imposing a device event is not possible, but I would need still a second opinion on this.

  2. now say the actions mentioned above are not possible, then it would be possible to hold on to my message arrived, he can be posted immediately after the call is completed?

  3. is it possible to kill an active call by force?

  I would be really grateful if someone could get an idea on these issues. Also, if there is an example or a document in place, any information about them would be highly appreciated. Yet once again, thanks a ton in advance to all.

  Thank you and best regards.

  Yes, you can display a screen on top of the phone application.  Therefore, you can display a message that has arrived.  Note that you cannot display at the top of the screen incoming call, but once the call has been answered, you can display what you want.

  There is no API in the API BlackBerry game that puts an end to a phone call.

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• Computers cannot connect to the server mirgae

  Hello

  I have the following problem.

  We have install a Mirage 4.0 Server and installed the Mirage-Agent to 10 customers.

  Eight of them are working properly. The other two cannot connect to the server. I figured out the they do not have a UUID in the BIOS.

  Mirage-server log appears in the event log, as the uuid = ffffffff-ffff-ffff-ffff-ffffffffffff on both computers.

  How can I make unique to the mirage computers?

  And how the mirage will create the AgentID?

  Thanks for your help?

  Sebastian

  Mirage uses the BIOS UUID and serial number to identify an endpoint. When one of them is absent, the other is usually sufficient.