Satellite A105-4384: Vista Print Spooler will not continue to operate
I upgraded my Satellite A105-4384 to Windows Vista professional. I downloaded all the updates driver from Toshiba Web site and since... my willingness to print spooler service is running do not.
It starts without error but dies immediately. Please provide a fix for this. FOR INFO. He died w / no installed printer.
Hello
I don't know what exactly, but I wonder if the print spooler service has something to do with Toshiba directly or maybe you should ask Microsoft which is bad it.
I use Vista Ultimate on older Satellite M70 and I can print all my Word documents.
Tags: Toshiba
Similar Questions
-
Printer spooler will not start error 1053
Hello
I got a Lexmark X 4550 printer installed on my Windows 7 x 64 inspiron for a few months now. Steeplechase the printer would not print that's never happened before. When I went to devices it says there was a problem with the printer and she needed troubleshooting. The store could not find a solution. I found a few fixes suggested online and you have tried without success. However, I discover that the printer spooler has been arrested. When I tried to restart services it came with an error that says: -.
Windows cannot start the service on the local computer printer spooler
Error 1053: The service did not demand launch or timely control.
I checked that it is configured to run automatically, and when I checked the dependencies that I discovered that the remote procedure call was arrested and the manual value. I have reset automatically and it started successfully. This did not however fix the printer spooler error.
I uninstalled the lexmark software and tried to delete the printer driver - this has not helped either.
I also tried the following: -.
Open a command prompt window
the control key;
dependent on the spooler of sc config = RPCSSRestart the print spooler
This did not help also.
I tried the list in the folder of the coil of compensation, but there's nothing in it.
I totally ideas, suggestions on how to fix this? I think that Windows had a fix for this problem on XP and Vista, but I can't find one for windows 7. Any help would be greatly appreciated.
James (and all those who have contributed so far),
I found this offer on the Microsoft Answers site forum. It's by a guy named encro.
Let me know if it works, I don't have access to a printer for the moment. I'd be more interested in your results, whether it is successful or not.
The solution: get the spooler to start!
This seems to be a very common problem on Windows 7, caused by a recent update 'Important' within the late March/early April. I found the fix for this while working on a clients machine and noticed something abnormal in that the print spooler was not actually the print spooler it is why it wouldn't start. Now that our team have set about 20 machines using this process, I'm confident enough, that this is workaround until a future WSUS update corrects this correctly. It's still speculation at this point because log files have not really brought to this day a lot of troubleshooting help this and it can be not linked to a KB from Windows Update.
I'm still trying to determine the real Windows Update update that caused the problem to inform Microsoft of bug but the problem goes something like this:
Determine if this is the case on your computer.
Verify the existence of spoolsv.exe.org and spoolsv.exe in %windir%\system32 (C:\Windows\System32)
If both exist then it is likely the following problem.
Compare the spoolsv.exe file size
Sometimes the real spoolsv.exe is called spoolsv.exe.org [545KB] and instead of spoolsv.exe place will actually be a file 41KO posing as the print spooler. I guess the system saved the original spooler at a given time and accidentally replaced it with something else. Spoolsv.exe should be the file 545KO at this point.Correction of the problem
Step 1: Spoolsv.exe and rename it spoolsv.bak
Step 2: Spoolsv.exe.org and rename spoolsv.exe
Rename spoolsv.exe.org here is a bit more tricky because it requires to change the property file from TrustedInstaller to the administrator group and giving the full group write permissions for the file. Without doubt, this has security implications, it is recommended to restore the permissions once the file is renamed.
By changing the property of the file from TrustedInstaller to administrator then activation full of change to the administrator group, you can exchange files by the name change and correct this problem.
I usually and rename spoolsv.exe spoolsv.bak and then rename spoolsv.exe.org to become the real spoolsv.exe.
Step 3:
Start the print spooler via Services (services.msc) or at the command prompt by using net start spooler.
Moment<3 from="" the="" spooler="" and="" a="" major="" headache="" for="" many="" people="" finally="" fixed="">
-
HP Pavilion: spooler will not delete print jobs
Printer spooler will not delete print jobs. The status is: Error - sent to the printer. Canon has tried to help by using several methods to remove print jobs in the spooler. None of them worked. What I can do next. Thank you
Hello
Please click HERE to access the procedure which should solve the problem.
-
Spoolsv.exe - local print spooler does not start
Dear all
My local print spooler will not start. After a recent Windows update all my devices when removed, which was a printer. I run the malware and anti spyware software on my PC, remove no matter what malware/spyware, but I can not yet install the printer I have.
The message I get is "Windows cannot add a printer. The spools of local printer service is not running. Please restart the spooler or restart the machine. I tried to restart the spooler but this does not work, I get an error 1068. I rebooted the machine several times; all to nothing does not. The 'service' shows 2 HTTP and RPC dependencies. My understanding is that the only dependency should be the PRC, but I can't change the file. Short to restore PC to factory settings and start all over again, I'm lost. Is there anything else I can try before taking this reconstruction?
Your
Doug
At a prompt (run as administrator), run the following:
dependent on the spooler of sc config = RPCSS
Note the space between = and RPCSS.
This removes any dependencies on the spooler and restore the default RPCSS dependence.
One of the problems with viruses and malware is that there is no real way to know what exactly it is they changed on your system, the more benign virus may be easy to remove but never pests morphing and a constant flow of new pests pushed one never knows how a machine is compromised. After the withdrawal of an infection, you should always ask yourself if you can really trust the machine, if you don't know if the answer is no, the only course of action is to flatten and rebuild the machine. Disk imaging/cloning utilities are perfect for this, they can help you get your machine running in a minimum of time and upward.
John
-
Print spooler does not. Unable to use printer
Cannot print. Cannot add a printer. Can't download new drivers. C:\WINDOWS\SYSTEM32\SPOOLSV. EXE is a program that does not work.
Quote from: http://snipurl.com/1mdayq [www_eventid_net]
From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.
To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\
\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting. Hope this helps, Gerry Cornell
-
Unable to print an e-mail with the error message: "local print spooler is not running.
Original title: whenever I have try printing an E mail I get message that "local print spooler is not running." Someone at - it a simple way to fix this problem?
I tried to add a printer change ink cartridges and I still can't seem to work. I received a message "local printer spooler service is not running, BUT I have no idea what is the printer spooler? NEED HELP!
Hi Larry,
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. What is the brand and model of the printer?
2. did you of recent changes made to your computer before the show?
3. is specific to printing an E-mail question?
The print spooler is a system of 32 services in the Microsoft Windows operating system. He is responsible for the management of jobs that have been sent to the printer or print from a network server. With the print spooler, the user can achieve a greater control over the print queue because the print spooler service allows the user to dispose of print jobs pending or to set priorities for projects.
Most of the time, the print spooler service works very well. Unfortunately, the opportunities will arise when the print spooler fails and you receive the dreaded error print spooler and print becomes impossible.
Please follow the methods and mark the question below:
Method 1:
Step 1:
Run the Microsoft Fix It from the link below.
Diagnose and automatically fix problems printing and printer:
http://support.Microsoft.com/mats/printing_problems/
Step 2:
Follow the steps in the link below.
Printer in Windows problems:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2:
You need to check if the Printer Spooler service is started from services.msc.
a. click Start, click run, type services.msc.
b. double-click the print spooler and verify that the status is set as Automatic or Manual.c. right-click on print spooler and click restart.
I hope that the information above helps you.
-
Problem with my printer - printer spooler does not
Printer Spooler not working do not, said no installed printer, doesn't let me install again running with windows Xp. I can do no problem before working with this printer for 10 months with no problems, is there a solution.
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:
AntiMailware MalwareBytes
SUPERAntiSpywareDo not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.
Cleaning of printers
NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article". Use of the special procedure for printers Lexmark described below and follow in its first Article. If still no joy, use the alternative method that is linked below.
A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
outputB. clean the old printer drivers and install the latest drivers by using the directions in One Article.
A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.
Open a command prompt window (start > run > cmd > OK)
Type the following in the black command prompt window and press enter
dependent on the spooler of sc config = RPCSS
outputNote that there is no space before the =
If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.
Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
-
I only had the default printers on Windows XP and my Canon MG6150 installed.
All printers on the printers/faxes folder in Control Panel have dissappeared can anyone provide the answer so I can print again
Hello
-What were the changes made to your computer before the question?
I suggest you follow these steps and check if they help.
Step 1:
This could occur if the print spooler is not started. Follow these steps to start the spooler service.
a. Click Start, click Run, type 'cmd' and press ENTER.
(b) after the opening of the command line, type "net start spooler" and press ENTER.
e. a message will be displayed "the service requested is started" or "the requested service is already started.Step 2:
If this is little help, perform the System Restore to the point that the printers have been listed in the printers/faxes folder.
See also these articles.
Printer in Windows problems
Resources for the resolution of the printer in Windows XP problems -
My canon iP4300 not work on64 bit XP said ' print spooler does not.
I recently changed my computer until I ran a system of 32-bit xp and now Iam updated to xp 64 bit system and my previously fine printer will not work. The message arrives:-"print spooler does not" ideas?
Hello
Step 1: I suggest you to download and install the driver appropriate from the following link:
http://software.Canon-Europe.com/products/0010386.asp
Step 2: Try the procedure described in the following article:
"You can not print and you receive the error message"Spooler subsystem app has encountered a problem and needs to close"": http://support.microsoft.com/kb/810894
-
Removed from Garmin using MSconfig and now I can't print. The print spooler is not running
I wanted to speed up my computer and remove an item off my msconfig. Now I can't print. missing spooler. What should I do? I tried dating back to some time earlier, but all previous changes are missing
Operation could not be performed. The print spooler is not running
the question I wanted to delete was for Garmin
don101947
Hello
I don't know if you have already solved the problem of the other answer, but here's something you can try if your not confident using the command line.
Go to [start],-> [Control Panel]-> [administrative tools]-> [Services]
Depending on if your running XP, Vista or 7 you can have 2 tabs at the bottom of the window you see.
Select [Standard] if its not already selected. If you already have a large list, skip this step.
Scroll down and find the print spooler. Double click it, and then set the "Startup type" to [Auto]
then click [OK] and then make a right click again print spooler and select [start]
-
Installation of the printer. error: "printer spooler does not.
Original title: printer Installation
Windows XP SP3 home edition:
Software printer installation error message, "printer spooler does not" no printer is installed or deposited.
This suggestion can help.
Quote from: http://snipurl.com/1mdayq [www_eventid_net]
From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.
To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\
\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting. Hope this helps, Gerry Cornell
-
Photosmart Premium C309-g: the drivers and the printer software will not be installed.
My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.
A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
~ Nelson MandelaWelcome to the HP Forums @GarfieldFan1969,
I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!
First step: clean boot, restart the PC and try the install again.
1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.2. now, choose Selective startup
3. Remove the check of the Load Startup items
4. click on the Services tab
5. check "hide all Microsoft Services" and then click on disable all
6. click apply , then OK
7 restart the PC and temporarily disable firewalls or antivirus programs
8 run the Installation Wizard for Windows HP printer to install the printer
9 turn on the firewall and start services
Second step: you unregister and re-register the Windows Installer Service:
1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
2. at the command prompt, type msiexec /Unregister , and then press ENTER.
3. at the command prompt, type msiexec/regserver, and then press ENTER.
4. at the command prompt, type exit and press ENTER to close the command prompt.
5. run the Wizard for Windows HP printer installationStep 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
1. go to start
2. type CMD
3 right-click and run as administrator
4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')You may need to run this upward to 3 times to solve all the problems
When finished, it will say one of three things
Windows did not find any breach of integrity (a good thing)
Windows resource protection found corrupt files and repair the (good)
Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)Try to reinstall the printer.
Step 4: activate the built-in Windows administrator account
1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).
Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.
2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.
3. now type the following command:
NET user administrator / Active: Yes
4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.
(Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)
You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.
Try to reinstall the printer.
Testify of my answer by hitting the thumbs to the top slot
Click on the button "Accept as Solution" if I helped you reach a solution.
-
all my printers have disappeared.
It won't let me uninstall it it says that the print spooler does not work?Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer
(check with the manufacturer for the latest driver).Check Mr. Fixits here and if you must use other methods to go back
and try again later.Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - you can find at the top of the list and do a RIGHT CLICK.
RUN AS ADMINYou can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type in the Find box-> Services find at the top of list - make right click on-
RUN AS ADMINBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
How do I restart the Vista Printer Spooler
original title: someone please explain how to restart the spooler printer under vista and not print just a link.
Hi I need to restart the printer spooler. Please do not post links to microsoft help. Tell me how. someone said to go to the Control Panel, administrative tools then... but I don't know which section? Cannot find administrative tools. where is he? I looked under printers, etc.
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
-
The print in Vista spooler stops when I try to print. He said the strategy adopted by the DEP. All printers disappear. I have to manually restart the spooler service (it is set for the recovery of the car) and it can print for a bit, but the spooler stops again.
Hello
Since it is a DEP issue with a printer that could be a problem of IE (which concern Explorer and other functions of the system),
a spooler problem, or both. Frankly I don't know that I have 1 but I'd probably use these
Methods.EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspxThe problem might actually be an add-on or another program to the origin of the problem and you should check that
1st.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).Start - all programs - Accessores - system tools - IE with no Addons - does this work better?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK
not better?
Close IE and try again IE or IE with no Addons
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
run as a scanner.I would add prevx so.
Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp-------------------------------------------------------------------
Do yourself a big favor and work through 1 above.
How control DEP but I don't recommend turning it off and certainly not to let power off.
How to enable DEP on or off for a program under Vista
http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.htmlHow to enable or disable DEP in Vista
http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html====================================
If nothing else works you can try this however I would use as a last resort.
IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
Online - APPLY - OK attacks close and restart IE====================================
====================================Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Firefox between information in research and the location of connection as if the SHIFT key is down.
When you enter in the search bar, bar website or a website login Firefox acts like the "shift" key is pressed to prevent that information to register correctly.
-
Satellite M305D: No sound through the headphones but the speakers don't work
Hey,. I have a M305D I reformatted and installed Vista Ultimate. I installed all necessary drivers. However, when I plug the headphones in the headphone jack I have no sound in headphones and the loudspeakers continue to play. I don't know if the soc
-
You can block e-mail from a specific sender reciving
reciving a Junk Sender emai
-
Multiple monitors: you install a video card in a Paviliion disable the onboard graphics
I have a p6250t paviliion running windows 7 (CPU intel quad-core, 4 GB ram, 600 GB HDD) with integrated graphics and want to run two monitors. If I install an integrated graphics card video card is automatically disabled, or I can use two ports that
-
HP Chromebook 14: I need to connect my Chromebook to my wireless Canon PIXMA MG3520 printer
I have problems connecting my Chromebook to my wireless Canon PIXMA MG3520 printer. Because of the Chrome OS, it does not connect like Windows or Mac. I need help before their retirement, please.