An internal error occurred while the diagram is open
Hi allBuilt an interface and run OK. Returned to him a few hours later and got the message "an error internal...." "when trying to open the rest mapping tab of the interface seems OK but there is another error trying to save which suggests ODI is trying to insert a null value in its own metadata.
Found a thread since the beginning of the year where Bos had same problem. It was suggested to rebuild the interface. Does this. Run Ok and could move forward and backward in the tab map, while fixing bugs. ODI has been closed and tried to open the mapping on the new interface, but get the same error.
With the help of ODI 11 g 11.1.1.5
The interface has two Tmp derived data inside stores and two warehouses of persistent data.
I was wondering if anyone else has had this problem?
It of late now so have not explored metalink etc. but will continue in the morning.
If anyone has any tips please tell. This is the top of the Java error stack (but I doubt it's useful)
Thank you
S.
java.io.IOException
at oracle.diagram.dif.DiagramIdeNode.getDiagram(DiagramIdeNode.java:226)
at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:408)
at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:326)
at oracle.modeler.addin.ModelerNode.findOrCreateManager(ModelerNode.java:212)
at oracle.modeler.addin.ModelerDiagram.findOrCreateGraphSystemFromContext(ModelerDiagram.java:344)
at oracle.diagram.framework.editor.CommonDiagram.open(CommonDiagram.java:219)
at oracle.modeler.addin.ModelerDiagram.open(ModelerDiagram.java:106)
to oracle.odi.ui.etlmodeler.custom.OdiModelerDiagram.access$ 0 (OdiModelerDiagram.java:1)
Morning.
Had the chance to watch on metalink now and this problem is covered in the notes 1279132.1
He suggests that this is caused when ODI Studio is set up with one language other than English. It also suggests that this problem is corrected in 11.1.1.5.0
The English could apply to our configuration but we are on the right group of hotfixes. However, the difficulty in the note is working!
Hope this helps someone.
S.
Tags: Business Intelligence
Similar Questions
-
I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?
I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?
You have posted in forum Windows XP hardware and drivers. You should have posted in forum Windows 7, probably the forumprograms .
If you post here, remember to include the name of the application that could not be loaded. Is Yahoo Messenger? Something else ("all applications for which I get this error")?
Your question is also confusing: you get this error message every time that you do a reboot?
You can use msconfigor Autoruns (look at the 'Connection' tab) to temporarily disable programs that start automatically when you log in to isolate the application that is causing the problem.
-
An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302
original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302
Hello Stephen,
try to run the "Startup Repair" utility located on your installation DVD.
hope this helps
Eddie B. -
Hello!
-A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--
I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...
Any help is appreciated. If I was not specific enough, I can specify in comments.
Thank you!
Hello
You must make a password reset disk before that there are problems with a password, not afterwards.
________________________________________________________________
Read this for your problem:
http://support.Microsoft.com/kb/940765
If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
_____________________________________________________________
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
-
Original title: Error 502
How to fix "an internal error occurred in the initialization stage. The application cannot be loaded, please, seller contact application, Error 502 "after installing Yahoo Messenger
Hello
1. Once you get this error?
2 are connected to any computer in the domain?
3. have you made changes on the computer before this problem?
I suggest you try to uninstall and reinstall Yahoo Messenger and check if it helps.
Uninstall a program:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Install a program: http://windows.microsoft.com/en-US/windows-vista/Install-a-program
If uninstalling and reinstalling Yahoo Messenger did not help, then it would be better to post the same question in community Yahoo for assistance.
Community of Yahoo: http://help.yahoo.com/l/us/yahoo/helpcentral/community_index.html
Hope the information is useful.
-
I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account, how can I fix this means if someone knows how to fix teas pleas answer me quickly I have to work
Logging in as an admin account, then reset the password for the account of the problem.
-
An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?
This issue has been resolved with the article below
-
ORA-04052: error occurred while the remote object by raising
Please help I m this error
ORA-00604: an error has occurred at the SQL level 1 recursive
ORA-04052: error occurred while the remote object by raising
ORA-01017: name of user and password invalid.
connection refused ORA-02063: preceding the line of LINK DBTom wrote:
Please help I m this error
ORA-01017: name of user and password invalid.
connection refused ORA-02063: preceding the line of LINK DBWell, what part of the name of user and password invalid needs to explain?
SY.
-
An internal error occurred during the processing of this Mathscript
I tried to run a ".m" file it starts with a number of % "commented" statements to help the program implemented. " I get this error as above as "internal error in row 0, then the error message. Please notify it is a problem using % or else where in the program?
Chuck
Hello Chuck,
This error indicates there is something in your script that LabVIEW MathScript did not understand. As such, it depends on the script that you typed. Is it possible to attach your script? If this isn't the case, you can try a binary search with your script. Remove half of your script. If the problem persists, the culprit is in the half top. Remove half of the upper part of the half and reaffirm. If this isn't the case, it is at the bottom half. Add in half of the text you removed and try again. After you have identified where the problem occurs, you can try to simply the script by removing other lines that are not necessary to run the problem line. If then you can put what you have, I can investigate on what is wrong.
It is possible that comes to mind if you perform a replacement of indexation of the following form:
[(m, n) vs s] =
In other words, one of the values of multiple return putting inside another matrix. A solution for this is to do the following:
[s] = so.
vs (m, n) = a;Grant M.
Staff software engineer | LabVIEW Math & Signal Processing | National Instruments -
An internal error occurred during the installation of the Service Pack (SP1) 0 x 80073712
I can not install Service Pack 1, the error that I get when using the standalone installer is 0 x 80073712, an internal error is produced so that installation of the Service Pack.
I tried a few times and tried in safe mod etc, everytime the same result.
Tonight, I tried system strengthened tool - here are the results:
=================================
Preparation of control system was updated.
Binary version 6.0.6001.22375
Package, Version 5.0
2009-07-28 20:20Checking deployment Packages
Audit of manifest Package and catalogs.
Checking package watchlist.
Control of component watchlist.
Verification of the packets.
Control components store
(f) CSI shows Bad XML 0xC0150006 WinSxS\Manifests\x86_638f1869cdfb43002a19f6fe8162c904_b77a5c561934e089_6.0.6000.16762_none_97a1342837387725.manifest x86_638f1869cdfb43002a19f6fe8162c904_b77a5c561934e089_6.0.6000.16762_none_97a1342837387725
(f) CSI catalog bribe 0x800B0003 winsxs\Catalogs\b6f4dc620eb230c19e41e48651d27e52ce429a0cb349a5f5cad42c8918e2f783.cat 02dc74378a3... eccd0ef3a50_31bf3856ad364e35_6.0.6000.20734_3e3193d09f7c88aa
(f) CSI catalog corrupt 0x800B0003 winsxs\Catalogs\8b246cbcadb7f5388e8917d267eb32fcb584ca8200675798655a48d88a7facba.cat b5148eadd22... 3472eb0cd44_31bf3856ad364e35_6.0.6000.20545_70080dd3a46ecc51
(f) CSI catalog bribe 0x800B0003 winsxs\Catalogs\b6f4dc620eb230c19e41e48651d27e52ce429a0cb349a5f5cad42c8918e2f783.cat a372dfee501... d60dd275ba6_31bf3856ad364e35_6.0.6000.16609_ec008ba78d152187
(f) CSI catalog corrupt 0x800B0003 winsxs\Catalogs\b6f4dc620eb230c19e41e48651d27e52ce429a0cb349a5f5cad42c8918e2f783.cat 60fba6ef368... 5b0b942774f_31bf3856ad364e35_6.0.6000.20734_5221a33b81369597
(f) CSI shows Bad XML 0xC0150006 WinSxS\Manifests\x86_b198f32397ae88fceb61583ecc0afec0_31bf3856ad364e35_6.0.6000.20937_none_ae2c4e68b0f8e679.manifest x86_b198f32397ae88fceb61583ecc0afec0_31bf3856ad364e35_6.0.6000.20937_none_ae2c4e68b0f8e679
(f) CSI catalog corrupt 0x800B0003 winsxs\Catalogs\b6f4dc620eb230c19e41e48651d27e52ce429a0cb349a5f5cad42c8918e2f783.cat dde3a15d602... 27a9ec079f9_31bf3856ad364e35_6.0.6000.16609_f084bb78773779e5
(f) CSI shows Bad XML 0xC0150006 WinSxS\Manifests\x86_microsoft-windows-mail-comm-dll_31bf3856ad364e35_6.0.6000.16386_none_777a686e5ba19395.manifest x86_microsoft-windows-mail-comm - dll_31bf3856ad364e35_6.0.6000.16386_none_777a686e5ba19395
(fix) Manifest XML file CSI CSI replaced incorrect file: x86_microsoft-windows-mail-comm - dll_31bf3856ad364e35_6.0.6000.16386_none_777a686e5ba19395.manifest from: C:\Windows\CheckSur\v1.0\windows6.0-6001-client.cab
Summary:
Seconds executed: 1570
Found 8 errors
1 error correction
CSI manifest XML bad Total Count: 3
Correction: CSI manifested wrong XML. Total Count: 1
CSI catalog corrupted Total Count: 5In my view, that he fixed a few things, but not everything. I tried again to install, without success, the same error occurred.
Can anyone help? -The amount of time it takes is stupid! -My phone is up to SP2 using the same install files without worries. I'm almost tempted to stick with no service pack until I have Windows 7, I already pre-ordered!
Any ideas then peeps?
See: Error Message When you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
http://support.Microsoft.com/kb/957310 -
Adobe Pro XI - use the operating system to Windows 7 Pro
When a PDF document is open in Windows Explorer, and pages are added, deleted, ratings, all types of changes, he cannot be saved until the Windows Explorer is completely closed. If you try to save the document, you receive the error message next - "the document could not be saved. The file may be read-only, or another user may have his opening. Please save the document under a different name or in a different folder. «I have confirmed the document is not read only, it is not open by another user, and this is not open many times.» Once completely, you close Windows Explorer and try to save the document, it saves without problem.
Are there settings in Adobe Pro XI or Windows that allows you to save documents without closing Windows Explorer first?
Thanks for any help you can provide. This error is a frustration because I open all my documents via Windows Explorer.
Turn off the preview in Windows Explorer.
-
Initially, this error message appears on my desk, while booting. I found a registry cleaner that was removed, but later discovered that he is always there when I try to open Windows Live Messenger. Can you please help?
Hello
· Did you make any changes before the show?
Method 1:
I suggest that you put the computer in a clean boot and check if that helps:
http://support.Microsoft.com/kb/929135
Note: Place the computer to a normal startup by following step 7 the link above, once you have completed troubleshooting.
Method 2:
You can also uninstall and reinstall Windows Live Messenger from the link below and check if the problem persists:
-
When starting, I get this message. Can someone give me a solution for this?
Thank you JD
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
Method 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353
NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.
It will be useful.
-
I create the reset disk of password on another laptop, because the other laptop I forgot the password. There is solution in another thjred saying to open cmd, but I can't open it because there is no password to access. But I have another account which is a guest account, then maybe I can reset the password to the guest account? (no internet in the guest account)
Hello
You cannot create a reset disk of password on another computer to another computer where you have forgotten your password.
You create a password reset disk on your computer in case, and before that you have forgotten your password, not after that you forget it.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk
@@@@@@@@@@@@@@@@@@@@@@@@@@@
If it is not applicaple, you need to reinstall the operating system.
"What to do if you forget your Windows password"
http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
-
When I start my PC, I always get this message. With that, a small figure of red monkey appears.
I have a Medion computer, 64-bit windows 7
I recently installed AVG Antivirus (FREE) and Comodo Firewall.
Can someone please help me solve this problem. In addition to the computer works fine.
Thanks in advance for your answer.
Use the clean boot procedure to determine which startup program is causeing the question
Maybe you are looking for
-
When and where 'New private window' Safari appear on the main stage of the MacBook Pro as a "choice".
-
HP NOTEBOOK PC 650: 650 HP LAPTOP PC SOME KEYBOARD KEYS DOES NOT
HELLO, I HAVE A PROBLEM WITH MY KEYBOARD. SOME of THEM DO WORK not, SO I THOUGHT IT WAS keyboards PROBLEM SO I JUST BOUGHT A NEW KEYBOARD PART. I TOOK THE OLD AND INSTALLED THE A NEW... ALWAYS THE SAME KEYS OF THE KEYBOARD DO NOT WORK. PLEASE HELP ME
-
IEXPLORER.exe won't no computer will end up sutdown
I try to turn off the computer - iexplorer.exe won't end - the will of the computer turns off - not how to fix this?
-
Steps to migrate some app from 4.6 to 10
Hey. I was writing applications targeting 4.6 and 5.0 and 6.0 a few years ago and I have an application that had several icons and a simple user interface that I want to work on my Q10 as quickly and easily as possible. In particular, I hope that I c
-
Z10 phone Contacts Contact Contacts vs BlackBerry
My new Z10 has all my work to the Outlook Contacts - contacts contain e-mail and phone information. But when I use the Z10 as a phone, there is no listed contacts I press the touch phone button. The Z10 not automatically link contacts in the 'Contact