An unescaped ampersand still causes LPX-00242 in xmltype.transform

Similar Questions

• 6.5.2 OS still causes problems of fan on PRO 6, as OS 6.5.1, but unlike the BONES 6.5.0

  

  Resolved in another thread:

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/OS-6-5-2-still-causes-fan-issues-on-the-Pro-6-l...

• iOS 10 update still causing problems?

  I heard that many users had problems after the update iPhone and iPad with iOS 10 and had to restore their devices to recovery mode.

  As I have not updated yet, I want to know if the problem still occurs or if it is now resolved?

  Hello

  We have updated 3 iphones & 4 ipads WiFi with no problems.

  See you soon

  Brian

• Touch input screen, disabling "Keep" still causes delay

  Hello

  I have a HP TouchSmart TM2 with Windows 7 64 bit installed.

  I wrote a web application that uses the touch by finger to navigate. To make the application respond directly when you click on a link I want to disable the right click menu.

  I have to do this... (some names may be wrong they are in Swedish, on my computer)

  1. «Pen and touchscreen»
  2. "Touch".
  3. Select "keep - right click" and click on "settings".... »
  4. Uncheck the box "Enable press and hold for right-click"

  Try the app again I don't you a ring around the finger by pressing and holding on a link, but there is always a delay until something happens.

  If I have...

  1. Check "enable press on and hold for right-click.
  2. Put the two sliders 'too short '.
  3. Uncheck the box "enable press on and hold for right-click.
  Then the time is reduced, but there is still a delay.
  My discoveries, there seems to be a bug in the settings "Tap and hold" which is not disable the delay, even when the feature is disabled.
  Is there a way I can work around this problem by setting the timeout to 0 value?

  Kind regards

  Marcus

  Thank you for visiting the Microsoft answers community site.

  The question you have posted is related to programming and would be better suited to the MSDN Community.

  Please visit the link below to find a community that will support what ask you:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A html link causes validation errors 45 (w3)?

  I have the following links on my site:

  http://www.srdar.org/employee/contact.aspx

  http://www.srdar.org/employee/contact.aspx?__EVENTVALIDATION=%2FwEWBwLu4rbEAwKE3KOaDQLN7Ob aCALdl9H7DAL06dDRBQKGhYbPBAKjuY % 2F % 2BCh90jZy3gHQFCJRLBGpOolpQWfXN & btn_elissa.x = 34 & btn_elis its there = 35

  The first takes you to "contact.aspx" in its default state, the second link will take you to "contact.aspx" as a view state saved, with different information. It works fine, no real problem...

  Except that it causes a series of validation errors (according to w3, the validation link is below). I have 5 links similar to this one on my menu bar, so each of my Web pages with 40-50 validation errors. Any ideas to rid errors and keep the links?

  http://validator.w3.org/check?URI=http%3A%2f%2Fwww.srdar.org%2Femployee%2FContact.aspx%3F _ _VIEWSTATE % 3D % 252FwEPDwULLTEwNjMwODQwODBkGAEFHl9fQ29udHJvbHNSZXF1aXJlUG9zdEJhY2tLZXlfXxYGB QhidG5fbWFpbgUKYnRuX2VsaXNzYQUIYnRuX2V1bGEFB2J0bl9EYW4FCWJ0bl9KYW1lcwUMYnRuX1ZpY3RvcmlhB3d LC8SIJZrKlA1UCz3yYxaYNzM % 253D % 26__EVENTVALIDATION % 3D % 252FwEWBwLu4rbEAwKE3KOaDQLN7ObaCALdl9 H7DAL06dDRBQKGhYbPBAKjuY%252F%252BCh90jZy3gHQFCJRLBGpOolpQWfXN%26btn_eula.x%3D38%26btn_eul a.y%3D47;accept=image%2Fgif%2C%20image%2Fx-xbitmap%2C%20image%2Fjpeg%2C%20image%2Fpjpeg%2C %20application%2Fxaml%2Bxml%2C%20application%2Fvnd.ms-xpsdocument%2C%20application%2Fx-ms-xbap %2C % 20application % 2Fx-ms-application %2C % 20application % 2Fx-shockwave-flash %2C 20applica tion%2Fmsword%2C%20application%2Fvnd.ms-powerpoint%2C%20application% 2Fvnd.MS-Excel%2C%20*% 2F % *; accept-language = en - us

  You have unescaped ampersands in your code.

  Replace & with & ampsemi-colon

  &
  

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• Skype causes the freezing of the screen when I make a call.

  I read so many subjects of this, everything tried and Skype still causes my screen to freeze, resulting in a reboot when I try to call someone or vice versa. I use the latest version of Skype. I tried different versions, reinstall several times and I do not know what to do now.

  Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• Why using the driver NOR-DAQmx ANSI C functions in a thread causes a deadlock?

  Firstly, apologies if this is bad advice, but it seemed the closest fit.

  I use MSVC 2008 Express with the library in ANSI C NI DAQmx for some analog output with a box USB-6009. I create a thread to handle the signal generation is based on fixed time. My main thread running the user interface. I found that I get intermittent blockages in release, so that libraries mode NOR are responsible (in the second thread) and I use MSVCRT features (on the main thread). My test code is attached as "deadlock2.cpp".

  I used WinDbg to try to find the cause of the deadlock. Traces of the battery of my two sons are attached as t1_stack.txt and t2_stack.txt.

  It seems that the MSVCRT localtime() function uses a lock when it is called for the first time and then went to lock the Windows DLL loader lock. At the same time libraries NOR (or less libraries mxs) are responsible for locking the charger DLL is being held. The mxsutils library uses getcwd() which seems to try to block something the MSVCRT and therefore my two sons are now deadlocked.

  I can probably work around this by calling the localtime() and the NOR-DAQmx functions before I spawn my second thread so that the DLLs are already loaded in the process. However, I have no guarantee of this to continue working if something changes in the future, and if there are any locks going on finally having the DllMain() calls for a thread hanging may still cause a deadlock. If my results are correct, is it likely that NEITHER would fix the dll for not trying to make something complex in their DllMain()?

  According to NI Measurement and Automation Explorer, I'm under DAQmx libraries v9.3.5f2. I download the latest version now to try, but it will take time.

  Hi dmcminn,

  Thank you for the comprehensive and detailed bug report. I was able to reproduce the problem with NOR-DAQmx 9.6 using the code you posted. I reported it to the R & D team suitable as CAR #366538.

  I agree with your analysis of the problem. Getcwd() so the first call to __tzset() acquired _ENV_LOCK, which Microsoft has documented as the "lock for environment variables. __tzset() also called GetTimeZoneInformation(), which can load additional libraries, that you have demonstrated.

  Here are a couple more possible solutions, but they are not great:

  • Link to the static version of the CRT (/ MT instead of /MD). This would bind a separate copy of the lock of the CRT table in your program, and DAQmx would continue to use the lock to MSVCR90.dll table. They use more of the same _ENV_LOCK.
  • Build using a different version of Microsoft Visual C++ (for example 2005 or 2010). MSVCR80.dll MSVCR90.dll and MSVCR100.dll own separate copies of the lock of the CRT table.

  Whatever it is, it does not eliminate the fact that mxsutils called the CRT while now the loader lock, and this function CRT acquires another lock.

  Furthermore, the forum Multifunction DAQ is a better place to ask questions DAQmx.

  Brad

• Jitter of RT! Can multiple readings to a variable / cluster cause a deadlock condition?

  Howdy do.

  While gradually develop and test an application on a crio9068 (RT linux) I started to see 'finished later?' in my main timed loop indicator flicker. Start pulling my hair out trying to figure out how to prevent this. I did a 'max hold' vi and can see the longest execution time for each image.

  The application runs fine at about 75% of CPU with the Panel open load, and the majority of the iterations run at the time. Sometimes I'll have a 'pic' at run time, all four managers in the timed loop take significantly longer than normal to run and the indicator 'late' says.

  A few questions I've had accumulate while chasing this:

  -If I use local varables to pass data between the loops, but only write to the variable in one place, can I still cause a condition of blocking/jitter by competing readings of this memory space?

  -If I use a node FPGA read/write to pass data between the FPGA and the timed loop, I should expect this causes a problem? I selectively disabled a lot of my code, and it seems that is where some of the delay occurs. What me stem, it's that these parts of the code have not changed in the recent development and the thing never used to run to the end.

  -On the theme of the node FPGA read/write, I assumed before that I should not write to the same FPGA FP element in different subvis. However, the code is set up so that there are several parallel calls to the read/write node, just with different selected items. Is that BAD?

  -Similarly, if I ungroup and read the same item in a cluster in a "parallel" mode control, can this cause a deadlock situation, or is it the same as unbundling and wiring away in several places?

  -I am thanks to the recently renamed "software calibration and management toolkit NI (SCM)," formerly Drivven CalView, to manage the communication between the RT and a windows host. He is also careful fault management stuff. Anyone else using it, and is it possible that I am getting jitter by having too many calpoints in my deterministic loop?

  No indication on any of the above would be greatly appreciated. If I don't make sense on any of the above points I do excerpts from example to describe.

  Hi Matt,

  What about under the name of multithreading - the same thread can run on multiple cores, but everything in a timed loop will always hold in a single thread.  For reference (see 'Set the execution order for screws of real-time synchronization'):

  LabVIEW Help: Synchronization of deterministic Applications (real time Module)

  http://zone.NI.com/reference/en-XX/help/370622L-01/lvrtconcepts/timing_control_loops/

  To cache the runtime data, I didn't have a specific method for mind, rather I generally try to catch at least one instance of the hiccups by capturing variables of interest in the shift registers or a FGV, just to see if there is any kind of difference.  This may not be useful in your case, as I suspect it's interactive execution, what causes the problem.

  Regarding the interactive performance and determinism, there is really no way of knowing what will happen, but it will often cause the kind of behavior that you see now. Because you are more or less continuous between the target and the host data, everything hangs in the network or on the computer host can set the RT system, especially if you read or write data on the front panel. Given that all of your curls are delayed at the same time, it seems the most likely scenario, unless you have a VI reentrant or similar shared between all the loops - I have seen that a few times with managers error or stop sharing.  Given that these spots are quite often (it resembles something like 1/100 iterations, I would recommend put in some shared variable RT FIFO benchmarking and the deployment of the application as a stand-alone RTEXE.)  It should be fairly easy at that time see if instability persists.

  Best regards

• ABC causes system freeze

  I would be very grateful if someone could please tell me how to troubleshoot the cause of a system freeze.

  After that a BSOD caused by the premature elimination of a DVD of my d: drive, a program that I use frequently, ABC, was originally a complete system to freeze any moment, I try to run... it is Exact Audio Copy, a program that allows you to burn a cd, content analysis of files for loss/lossless music.  The only way to address the gel is through reboot cold.

  Here are the steps that I took so far... and maybe this will give you an idea:

  1. I uninstalled, but when I tried to re-install it ALSO caused a freezing of the system.

  2. in Safe Mode, I was able to reinstall them and run the program without problem.

  3. after the installation in Mode safe, but chasing after systematic startup, the system froze.

  So, I assume that there is a driver conflict...

  EventViewer does not seem to grasp the issue... nothing showed up.

  Are there other ways to understand the question?

  I am running XP Pro SP3, all the installed updates, on a Dell Vostro 220 s computers.

  Thanks a lot if someone can help me with this.

  Pter

  Just note if EAC still causes crashes while all other programs/processes are not running. If this is the case, then it has a bug or there may be a problem with one of your drivers. If there is no blocking, systematically add pack programs/process until there is a blockage. Essentially, you need to use the process of elimination until you isoliez the villain.

  Start by adding half back and then see if there is a blockage or not. You'll understand!

• Still problem of PP - create, edit and re - build

  I have a Premiere Pro project with a single sequence.  The name of the sequence is be the name of the project - hopefully, this isn't confusing Adobe - however, that's what I did...

  I created the file again to leave Premiere Pro using Dynamic Link.  I built the project in again on a DVD.

  Then I made some changes to the clips in the first, and of course, I can see the changes in yet.

  However, when I go to build another DVD - I expect to see the changes that I have made - still not transcode anything, but simply started writing on the DVD.  The result is the same as the first time that I built the DVD - there no changes I did in Premiere Pro.

  I guess that there are files redenered - somewhere - who still uses to write on DVD-, he is too stupid to realize that it must re - transcode the project because it has changed.

  And I guess it's a bug that undoubtedly knows someone (like Adobe).

  Workaround solutions?  If I can find these rendered files and delete them, still will have no other choice to re - make the project and include my last changes.  Looks like a real pain...

  This makes sense?

  I'm runnning an i7 from INTEL on Windows 7; 64 bit.

  Scott

  I don't know if it's a bug, or design, but all you really need ot is right click on your dynamic body related sequence in the bin again and select "revert to the Original. That will still cause to abandon the transcoded M2V file, point to the original (and now altered) Agency sequence.

• At the battle of the still chapter markers

  Hello!

  I spent the last 4 hours trying to get the AE still chapter markers. Nothing seems to work. I tried the two markers of model and benchmark layer, with the text and numbers in almost all areas. I tried the AVi and Quicktime containers as my export format. But nothing that I do not seem to bring my markers yet as chapters.

  The only way it works is if I use Dynamic Link, but DL is far too slow for this project because my AE stuff has so much on in there. So I really need to export an intermediate EI file.

  Someone at - it successfully exported a video file from After effects to still with marks of layer AE transformed into chapter marks still? I certainly have no chance with this process ;/

  Who has never worked? I know for sure that it works with my HDV / DV captured view first (on PC), but I think remember me endless discussions about it being broken for the rest. So this may be a hopeless case, after all. What you could try as a detour is to use Soundbooth and generate a dummy audio file with markers, that AE so much still to recognize correctly, but you will have to bite the bullet and put markers of tha manually into the still of otehrwise...

  Mylenium

• Bug in slideshow

  Everyone has attempted to create great slideshows? This doesn't seem to work. I used 55 photos in a slideshow (flash elements). The random selection of transitionType he did not work at all. When you select Rotate transitionType successfully, he showed the 55 photographs but the legends have been truncated and dissappeaded after 13 images. This seems to be a very serious bug that someone must have seen before. Any ideas?

  

  OK I found this a bit more. I was wrong about one thing, the problem was not the number of images (size), but it was a number of small problems.

  (1) the text of the image caption cannot contain certain characters. A comma will result in the legend of the passage to a new image. An ampersand will cause all hell breaking loose, and don't get started me on the Swedish characters. So, write your caption without these characters (not big). I think it is still a bug, so I will report it. It is not flash is the editor of CreamWeaver who has this problem.

  (2) the Image Transition "Random" option does not work it will also mess up the order of the images.

  Knowing this, that it is easier to create slideshows, otherwise it will grow you nuts. Which has me thinking about thinking that this phenomenon was linked to the size was I used these characters to the end of my slide show, then I started thinking it was too rich for DreamWeaver, Oh but it n; t, it was the characters.

  And also a response to KenRogers2, the image URL I put my own images (relative paths). You can see the result in

  http://www.thomaswikman.com/TravelPhotos/Sweden_2006/SlideShowSweden.htm

  This slideshow was the first thing that I created using DreamWeaver (try).

• Mac Pro freezes on the screen saver 10.11.5

  Have a Mac Pro and have a problem when the system freezes and locks up and must power cycle back.    He had related app so tested, but also happens with no apps running third and now thinking seems to be related screensaver.  I have turned off the screen saver and will see what happens now.  However, someone else has the issue of the screensaver crashing the OS X on a Mac Pro to 10.11.5?

  No, I have not heard of this.

  You do not all apps of third parties running in the foreground, but can still cause the problem. Boot in safe mode (hold down the SHIFT key when starting) and see if the problem persists when the screen saver is used.

• Dropbox for bookmarks or downloads of the navigation bar adds space between the navigation bar and bar bookmarks.

  When I press the button edit bookmark or download the toolbar for navigation that a line of space appears between the navigation bar and the bookmarks toolbar. This problem is corrected when I start Firefox in safe mode, but not when I boot normally and disable all addons. Please tell us how to solve this problem. Reseting Firefox and install all add ons still causes too many problems, so I hope to be able to solve this problem without reset.

  [url =http://postimg.org/image/uwr2x6x21/] [img] http://S28.postimg.org/uwr2x6x21/space.jpg line / URL

  You can also try to delete the file localstore.rdf (resets the toolbar configuration) in the case of its corrupt.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Mac problems due to the memory

  I have problems with my Mac doesn't turn is not on. He turns sometimes and sometimes does nothing for days. I've read a lot online, and it seems to be the memory of the origin of the problem.

  When it's on I went t disc utility and of course there are 499 GB 500 GB used. I started the trash everything. I got up to 310 GB of used memory, but when I click in disk utility there are two levels of "Macintosh". Level 1 - logical volume memory I think it was called is still at 499 but the second level which I believe was called simply logical memory is 300 GB.

  I live in Tasmania where there is no official Apple store and authorized service location is closed on weekends so I'm pretty stuck for a few weeks before I can get down to one.

  Any advice on how to free up memory on the first level of the "Macintosh" or if it's still causing my problem with the Mac not turn not not on?

  Thanks in advance.

  Hello

  You seem to be talking about the space on your hard drive rather than 'memory '.

  Try to boot into recovery mode - if your OS is 10.7 or later - now pressed the command and R keys at startup. Choose utility disk, then run first aid on your startup disk. It is one that is indented to the right and is usually called Macintosh HD.