analog input on USB-6009 - what potentiometer to use for this test?

Similar Questions

• analog input offset USB-6009

  Hello

  I use several USB 6009 units and with some of them seems to have some lag in differential mode, I with 0 to 1V range. Grounded the two terminals with resistors as shown in the tutorial OR «wiring field and noise review...» "seems to fix the problem for some of them, but for those that I have not the slightest compensation first, the ground gives me offset.  Can someone please suggest?

  Thank you

  DS

  DS,

  Please submit your question in the Forums of NOR. Are you trying to take a differential measurement? What features are you try to measure it and what channels the drop-resistance work with and what channels do they not work with?

• What is the USE for a TEST PAGE/printer status REPORT

  Did you read post or forums and a tech wants to see you if you can print a test page or the printer status report?

  It is a test to make sure that a function of the printer works properly. Sometimes you can't print from your printer and everything is blocked and you think it's the printer. If you can print this test page, then most likely it will be a software problem or a connection problem.

  The information contained in a test page can diagnose a problem with the printer or to consider including information about the printer. Test pages can be printed using the print or the computer control panel.

  The page test print function prints a page with several print cartridge models and a numbered list, containing specific information about the printer.

  I hope that is useful to the community.

  Thanks for reading.

• What is PXE - 61 media test failed error and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop

  I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.

  Kala

  Hello Mohan,

  ·         You did changes to the computer before the show?

  These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.

  Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.

   

  Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

• Standard Enhanced PCI to USB Host Controller: a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

  How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. "  Another driver can provide this functionality. (Code 32). »

  I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.

  Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• What connection to use for faster printing

  I install my new of Officejet Pro 8600 today.  I have three options to connect, is a USB cable, ethernet cable or wireless.  To make the decision, I have a second remote desktop connected wireless to the internet and the usual iPhones.  My work horse is the computer that I will use often and want to have the fastest printing capabilities.  I still want to be able to print from the second remote computer too.

  Nothing in the HP documentation which addresses precisely this question.  What is the best connection should I use for this arrangement?  Your response would be greatly appreciated.

  TIA... John

  All of these out-rate connections greatly the mechanics of printing, so it's not really important.

  Between Ethernet and wireless, ALWAYS choose Ethernet if you can (no password, no interference, etc.).

• Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.

  Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.  When I got to disk utilities to erase, and then reformat the options are

  1 mac OS extended (journaled)

  2 mac OS extended (journaled, encrypted)

  3 mac OS Extended (respect for case-sensitive, journaled)

  4 mac OS extended (case-sensitive, journaled, encrypted)

  See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support

  When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.

  • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
  • If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).

• What should I use for a replacement of WinMail in Windows.

  What should I use for a replacement from WinMail in Windows 7 when requires it a number of sites to meet an address or a link that the site offers an answer or a question.  I have msn, yahoo & gmail but lost WinMail when I've upgraded from Vista to Windows7.
  I lost WinMail thur a mistake some time & it was a nighmare tring to meet links on sites that requires to open a format Outlook, Outlook Express or WinMail.

  I have msn (hotmail), yaho & gmail, but none of them will come when I'm trying to respond to the link sites for a response. If one of those that should be used, how it equal in Windows7?

  Windows Update has nothing to do with the upgrade of Windows.

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Oiseau-tonnerre) , and then set it as a default for mail in CUSTOM (<>) Set Program Access and defaults of the computer before any function article send to or MailTo will become available.

  You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  Support for Windows Live Mail (which will be able to import your data from Windows Mail Backup), you will find in this public newsgroup:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What driver to use for a HP 8563 A Spectrum Analyzer and a Giga - tronics 12000 has

  What driver to use for a spectrum analyzer HP 8563 and a Giga-tronics 12000 microwave synth... these two are not in the driver list can someon help

  Since there is no drivers, you can create your own, request one, use the Instrument i/o Assistant, or hope that someone has one and he posts here. On the creation of a help or to ask one, see the main page of the Instrument Driver Network . As long as you're familiar with the instrument and the manual, creating a driver is not so difficult.

• I want to know what mircosoft to use for education online

  I want to know what mircosoft to use for education online

  If you plan to go to school, I would contact the school to see what their or are the requirements of instructors.

  J W Stuart: http://www.pagestart.com

• My computer crashed while I was able to cancel the registration of my copy of Windows 7. I would like to move to my laptop. What should I do for this (a number to call, etc.) Thank you!

  My computer crashed while I was able to cancel the registration of my copy of Windows 7. I would like to move to my laptop. What should I do for this (a number to call, etc.) Thank you!

  Jut a little word. If it is a retail version of Windows 7, you should be OK, but if it's a version of Windows 7 OEM then the license died when the machine does.

• What version of Photoshop is best used for this laptop?

  Good afternoon. Please tell me what version of Photoshop which is better to use for this laptop: HP Notebook 11-d055ur flow (Intel Celeron N2840 2.16 Ghz / 11.6 "/ 1366 x 768 / 2 GB / 32 GB / Intel HD Graphics / WiFi / Bluetooth / 3G / Win8.1")

  Thank you.

  [Title edited for clarity and moved to the General Discussion of Photoshop - Mod]

  Adobe publishes a list of the minimum requirements for each version.  Configuration of Photoshop  CS6 - CC 2015.5

  But you want to look at the specifications of the optimal system for the work you want to do:

  https://www.pugetsystems.com/recommended/recommended-systems-for-Adobe-Photoshop-139/HARDW recommendations are

• What metrics to use for memory capacity planning? Active or consumed (in request or use vROPS)

  Hey all,.

  I was wondering once more what metrics to use for memory capacity planning. Since the information from different sources (for example your ESXi host needs more RAM to Iwan Rahabok or VMworld 2012: Session VSP1729 - virtualized memory understanding performance management - Eric Sloof - NTPRO.NL Kit Colbert) pointing all assets (vROPS request), I expect that when we have high memory consumption / use in vCenter there will be no balloon / compression / permutation.

  Also the metric active / request should not be used for all workloads (e.g. Java / DB), why is - this? I have not found the reason of this anywhere, only the fact.

  Other sources such as Mark Achtemichuk suggests using consumed/use, which is the opposite (Understanding Active Memory - VMware vSphere Blog - Articles VMware vSphere).

  So I thought I'll with active / demand as metric and ignoring the warnings inside of vCenter.

  But the last time we have fixed half of our group, we had consumed/high memory usage and the vCenter began to inflate, compress, and finally to Exchange. Not a lot but I had not expected that, because memory active was only a small percentage of consumed.

  Can someone explain to me why this happened and who is right on this issue.

  Kind regards

  jengl

  jengl I don't know if you asked the wrong question, or I give the wrong answer :-)

  It is always good to attach screenshots, background to the issues, and what exactly you are trying to solve.

  You wrote:

  So to summarize:

  -ESXi uses consume to decide when to start the recovery techniques of memory RAM

  -To rightsize VMs for RAM, you must use the counter inside the BONE, not active

  -If you do not want to commit too much RAM and have a lot of the balloon you should right-size your virtual machines or extend the RAM / buy additional servers

  Please correct me if I'm wrong.

  My answer: you are right. If you do not have access to the guest operating system, then Active VM and VM consumed are better guess. Better than nothing :-)

  Sizing sizing of VM and ESXi are 2 different things (2 use cases) different. Please don't mix up the as soon as they are confusing. Do not try to resize the virtual machine when you are sizing the ESXi, unless you have a control total on them.

  You wrote:

  The question for me is: how many cache (standby under Windows) inside the VM is really necessary for the virtual machine to get the best performance without wasting resources. Perhaps this issue can be resolved only by tests or do you know another option?

  My answer: it's a different topic brother :-) It is different, because it is within a guest operating system (Windows in this case) and is no longer at the level of the ESXi. Suggest that post you another, possibly under Windows or vSphere too :-)

• What is config.version = 8 parameter. VMX file and what is the use of this parameter

  What is the use of this parameter

  . VMX contains an entry called config.version which will specify a Version number of the vmware product that came with.

  1. Config.version = 7 - jobs of VMware version4/GSX Server 3.x
  2. Config.version = 8 - version of VMware Workstation 5 and 5.5

  If you have a copy of the virtual hard disk only. VMDK and you don't know that generation of equipment it is, then you can search the file for the appropriate string. Identification of material is stored in the first. VMDK file of the defined virtual disk.

  Widnows:

  Find "virtualHWVersion".

• What Oracle network uses for CAR traffic? where you get the Info?

  Hello
  
  I use two-node RAC on Oracle 10 g R2 (10.2.0.3.0) version on SUN Solaris 10. I want to know "what Oracle network uses for CAR traffic? where you'll Info»
  
  -Kumar

  Hi Kumar,

  In 10g, you can query x$ ksxpia. If the cluster_interconnect is stored in the OCR (by default), you will get

  SQL > select INST_ID select, PUB_KSXPIA, PICKED_KSXPIA, NAME_KSXPIA, IP_KSXPIA, x$ ksxpia;

  If you have specified the cluster_interconnects parameter in your init.ora:

  Columns to look in: INST_ID select PICK NAME_KSXPIA IP_KSXPIA P

  And also you can use 'CPI oradebug' to see who connects the database uses:

  SQL > setmypid oradebug
  SQL > oradebug CPI

  It could be that useful...

  Thank you
  LaserSoft