Analyst "stabilizer warp" is? plugin or what?

Similar Questions

• Stabilizer warp OpenCL renders in a small box in the upper left corner

  Hello world

  I just built a new computer with the following specifications:

  • First 8.1.0 (81) build
  • Refresh-i7 4790 s haswell,.
  • Corsair 16 GB of RAM (4 x DDR3 1600 4),
  • Gigabyte Z97MX game 5
  • 2 x SSD 128 gb A - Data SP920
  • Sapphire Radeon HD 7750
  • Windows 8.1 Pro CZ

  Now, I know, it is a very low Setup compared to other builds here, but I was hoping that it would work very well for my workflow Full-HD amateur clips mostly under 30 minutes.

  The problem is when I activate the acceleration of the OpenCL, all clips with stabilizer warp then become about 1/4 of the preview window; he wears the final render. I tried this with the AMD card and without it (OpenCL have enabled with the Intel's HD4600). Nothing helps.

  

  Now the funny part is that I used to have that same card in my old system. running on a Gigabyte obsolete UD3 with core i5 750 inside and... IT WORKED! It is with the same first version, running on the same OS. I dropped this computer a few days ago, but my new computer has this problem inexplainable.

  The build is not the question, because I got the test computer and everything is stable with decent temperatures.

  I'm also having a lot of crashes when editing, but I think it's because of the infamous suite S.redgiant which, as I read on the forums is probably to blame. It's ok, I just need to save often. Neat video could be better? Does anyone know?

  Another problem is sluggishnes and offsets when my clip reaches beyond 30 minutes; I don't think it's ok, my videos produced with EOS M should not be demand for this configuration. When I monitor the use of the ram, it is never more than 8 GB (and Yes, I welcomed CC to use up to 13 GB of total ram); other resources are also almost inactive during editing.

  The sluggishnes and the offset is however still worst in SpeedGrade; there when I move a slider, I have to wait seconds! Somehow, it improves over time, but again, I have just notice now that this software suite is very very poorly made. I am pleased, that I do not use it to make money...

  Please correct me if I'm wrong and that all the links that could help me solve problems are very welcome.

  Kind regards

  Jan

  Thanks for the report. We believe that we have identified the problem and are working on a fix. At the moment the solution renders in software mode.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• Clips on the timeline in PP display color bars after the use of stabilizer warp?

  Hello, hoping someone can help here as I have tried and can't work on what I have done. I use CS5.5, 'replace with after effects', I used to send clips to AE, and then used the deformation of images of stabilse stabilizer. Effect could be seen on PP project and was going well. The re open my project some time later I noticed color bars showing on these clips on that I had used the warp, the play still clips stabilizer, but they show a brief shot of the colored bars. I think it may have started after I made my PP project? If I drag these elements in the source panel just as I see the colored bars is changing and still it will play in the workspace of the timeline, I tried to export to the encoder and all I get is the color bars. I'm sure I've probably made a simple mistake here, but I can't cope and hope someone can help me here.

  Thanks in advance

  Open After Effects clips projects are in and make sure that everything is fine.

• What is the mozilla firefox update Shockwave Flash plugin AND what is the latest version of Adobe Flash Player?

  After update of mozilla firefox and come here to help another user pointed out that I had several Flash plugins below. Before updating, I was updating from mozilla firefox and Adobe. Of course, things were NOT up-to-date. I managed to delete the obsolete Flash and Adobe Flash Player plugins. I just want to know what that "more" updated the plugin and the player are while I know that I have the last and am new. I do the last firefox update now and I use Windows 7. Thank you! You people here are the best!

  Note that your system details list shows several Flash plugins.

     Shockwave Flash 14.0 r0
     Shockwave Flash 17.0 r0
  

  The plugin for Firefox is called Shockwave Flash and the latest version is 17.0.0.188

  When it installs, Flash by default to update automatically, but if you need to manually update, you can use one of these pages:

  • https://get.Adobe.com/flashplayer/ (uncheck all the unwanted extras)
  • https://www.Adobe.com/products/flashplayer/distribution3.html (one for the browsers 'plugin')

• Cannot download QuickTime plugin. What could be incorrectly prevent the download and installation?

  I'm working on a Web site that uses QuickTime. It says I need a plugin. I click on the link. Firefox puts a window showing that Apple QuickTime is required. I click on install. He goes to a window that indicates the plugin is not available and I can download manually. I click Next. He takes me to the Apple's QuickTime download page. I click Download. Nothing happens. I'll double check the download location. Nothing there. I go out and try to download other plugins to update the Plugin module. Everything works very well. I go back and repeat. Nothing more. I don't have any idea about what is wrong or why. Help please!

  I'm such a DUNCE! Please accept my apologies! I discovered that I was wrong, while waiting for a response... I had not seen the Ribbon of blocker popup at the top of my screen. It would be so nice if there was a noise put with this Ribbon, so it stands out.

  Please accept my apologies for posting a question when the solution has been with myself. Thanks in advance if you plan to help me.

  So embarrassed...

• When I try to attach files in hotmail, I get a message that silverlight plugin crashed and error report error on plugin - container.exe. I have the latest silverlight plugin. What should do?

  • I work on windows XP

  I have latest fire fox and silver light plugin

  • 'Silver plugin light crashed', that's what I get when I try to attach files in hotmail
  • error report on plugin - container.exe.
  • where to find the plugin - container.exe. to install and try

  Hello

  Please also try to disable the Silverlight Add-on in Tools (Alt + T) > Add-on > Plugins before you open Hotmail. You may still be able to attach files.

• Can I export data from stabilizer Warp?

  I have two identical video clips, they match frame, but one of them is less exposed and is much darker. Therefore, it is much more difficult for the stablizer to work chain.

  Can I somehow export the data from the stabilizer of chain on the clip that it works on to apply the slot exposed clip?

  I would use Mocha to stabilize the shooting, but I'm having difficulty with it, as it requires executives to match all along and my shot turns.

  
  

  Any help is greatly apprecaited TIA

  If you have identical pictures then you have either a motion control camera, and even then it is highly unlikely to be exactly the frame for frame unless the platform was very large, heavy and expensive and your players were robots because anything moving in the scene would throw off the coast of the string stabilizer or the camera has been locked and there is nothing in the scene. There must be some differences in the shots or there is no need to work on one that is under-exposed.

  Nothing prevents you to do exposure or calibration adjustments on the original clip and then before the composition of colours or made a pure copy and warp stabilize this clip. I don't think that anything else will not work.

• Reverse the clip and stabilizer Warp together?

  I often stock b-roll, which I think would be better if the offset of pan or update is reversed. Often, I would also smooth while using the stabilizer deform. Unfortunately, these features do not work together. At the moment the only way I can think to get around this is to encode images in a new inverted file, import the new file in the project and apply then the stabilizer deform. It's a little complicated. Anyone know better?

  Reverse the clip, nest and then add Warp.

• Problems of links dynamic stabilizer warp 5.5

  Summer messin with the demo while I wait patiently for my upgrade to 5.5 and I encountered a problem with the stabilizer of string when sending several clips from the timeline to and from the 5.5 organization. If I send a clip, use the stabilizer chain in AE and save the project, the results are fantastic and it's right there on the timeline. Groovy... Until I send another clip. The second clip is very similar to AE... well stabilizes. Save the project as a new name in AE, out... back to the body and the clips will be the same! It will duplicate the first clip of stabilized! Sometimes I can remove the instance from the timeline and drag the model of EI from the tray back to the timeline, and it'll work until I do another clip, so it will be a duplicate again. Also, sometimes it will flicker a mock-up of the new model and vice versa. As he is confused about what computer to play in the body. I hope that when I export, he'll be fine, but this seems pretty serious.

  I tried dumping cache, cleaning of the project, saving model AE projects to different folders and drives. Does not appear to matter.

  Oh... btw... Data sheet:

  I7 970

  ASUS P6x58D-e

  Kit of 24GB 1600 G - Skill

  120 GB SSD Revodrive 2 C:

  D: WD Black 1 TB for applications (not Adobe apps, they're on the SSD)

  E: WD Black 2 TB for video

  I: removable docking with 1 TB Samsung spinpoint F3

  F: LG BDR

  MSI GTX 560 Ti OC (works fine with the .txt file to update the MPE!)

  Win 7-64 Pro (due 24 GB)

  This bug has nothing to do with the stabilizer deform, it affects all the DL and has been around since the beginning.

  It is a PITA.  If you keep all your compositions in the 'same' æ project he seems to work better.  If you make a "Save as" and rename the project AE the bug appears again.

  Also DL is always 'not binding' for some reason any in CS5, CS5.01, CS5.02 and CS5.03.

  I hope that CS5.5 solves this problem.

• course Firefox disables Adobe Acrobat plugin. What is the workaround?

  I just installed the latest Mozilla Firefox for Mac (version 43.4)

  The new facility off my Adobe Acrobat DC plug in extension as being 'unsigned' so don't not careful to run.

  Is there a more recent extension?

  What is the workaround?

  Wait for the update to Acrobat DC next week that will solve this problem.

  -Dov

• Stabilizer Warp analyze alert burned out

  Hello. Having a problem that I could not find an answer online. I have a clip in a calendar that has string stabilize on it, and when I export to aid media encode the output displays file bar analysis rendered on the screen. This only happens with media encode sequences sent from first. Doesn't happen if I just export from first. Trashed media encoder prefs, but that did not help. The music video is h264. No other effect in the video. Any help would be greatly appreciated. Thank you! Chris

  Hello

  Have you tried:

  • Change the video rendering engine in Adobe Media Encoder (lower right corner of the queue Panel)
  • Clear the Cache of media

  Thank you

  Regalo

• Can I change the default settings of stabilizer Warp?

  I want to change the percentage of default stabilization at 5% (instead of 50%) so I don't have to change it every time. Is there a way to change the default values of this effect, it will always apply to 5%?

  You can try saving it in a preset, just click with the right button on the effect in the effect controls panel and choose Save preset.

• creation of stabilizer Warp analyze button grey

  Hi guys

  I'm working on a few sequences in PrCC2014, which is really bad, so I thought I would try the stabilizer for the first time of the real. I ran the stabilizer and a message 'Frame not parsed for stabilization; "Click on analyze. The problem is that the analyze button is grayed out. Someone at - it ideas please - he got something on or off?

  Kind regards

  Graham

  

• AE crashes when loading project "occurred. invoking the plug-in"stabilizer Warp"effect Details.

  Start with my PC Info:

  

  and a few details:

  

  So I tied first Pro cs6 in after composition affects CS6. Last night, I was working on it, everything was fine, I exported a test copy and that worked, everything was great for the night and I saved and closed. Tried to re - open the project this morning in Premier Pro and it would not load, so I opened after affects and I get the following error messages. I am able to load other projects successfully, and I do not to move any assets after that I closed last night programs. I tried to restart and reload several times and I get the same error messages constantly. I sought advice for similar problems and found some possible solutions #1 'use capslock at the opening of the modernization project to delete. Then re - make the effects that are causing problems. I tried this and it doesn't seem to work, but I can't have done it correctly, I simply pressed caps lock shift and made sure it's on when I clicked on the project to load, however I got the same errors. #2 delete the cache for the project and the new rendering. I can't locate the files in cache for this project in the affects on the record, is this referring to the cache files in Premiere Pro? I admit I'm a little afraid to do...

  \

  

  How would you recommend all that I proceed? I am entirely willing to add a link to files or do anything that needs to be done. I'm also curious of what happened... If I can avoid it in the future.

  The after effects CC (12,2) update corrects a cause of an accident involving the effect of auto contrast, auto levels effect and the related effects.

  Let us know how it works for you after installing the update.

• I have a problem with the stabilizer warp in Adobe Premiere Pro CC on mac

  If I want to apply the Verkrummungsstabilisator on a clip, suddenly only a small cleavage of the clip appears in the upper left corner when the effect has finished the analysis. The rest the clip appears black. Why is this? Is it some wrong settings, I met?

  Hi skwosnjak,

  Please try to switch the software rendering engine mode, so, go to the Menu file > project settings > General and change the software rendering option engine only mode.

  Kind regards

  Vinay