creation of stabilizer Warp analyze button grey

Similar Questions

• Stabilizer Warp analyze alert burned out

  Hello. Having a problem that I could not find an answer online. I have a clip in a calendar that has string stabilize on it, and when I export to aid media encode the output displays file bar analysis rendered on the screen. This only happens with media encode sequences sent from first. Doesn't happen if I just export from first. Trashed media encoder prefs, but that did not help. The music video is h264. No other effect in the video. Any help would be greatly appreciated. Thank you! Chris

  Hello

  Have you tried:

  • Change the video rendering engine in Adobe Media Encoder (lower right corner of the queue Panel)
  • Clear the Cache of media

  Thank you

  Regalo

• Analyst "stabilizer warp" is? plugin or what?

  Hello

  I work with Adobe Premiere Pro CS 5.5.2 for windows.

  In my program is not the video effect "stabilizer warp"... why?

  Language Italian is "Stabilizzatore alterazione" and I saw in some video on youtube analyst is present.

  Please help me!

  Concerning

  Lorenzo

  PS Sorry for my bad English

  Hi Lorenzo,.

  Stabilizer chain was introduced in Premiere Pro CS6.

  Thank you

  Ilyes Singh

• Absence of the Analyze button on metadata Panel

  I use the latest version of first Pro CC 2014 on my laptop.

  I am trying to analyze the speech. I play the same actions by steps like on this web page http://www.adobepress.com/articles/article.asp?p=2251211 & seqNum = 4 , but even if I'm on metadata Panel I did not 'analyze' button, as shown in step 4. The only thing I have on the bottom of the Panel is grayed out on 'edition '. I have models of analysis of speech installed on my PC. What I have od bad? How to enable the analysis of discourse?

  See:

  Adobe Premiere Pro help. Summary of new features

• Stabilizer warp OpenCL renders in a small box in the upper left corner

  Hello world

  I just built a new computer with the following specifications:

  • First 8.1.0 (81) build
  • Refresh-i7 4790 s haswell,.
  • Corsair 16 GB of RAM (4 x DDR3 1600 4),
  • Gigabyte Z97MX game 5
  • 2 x SSD 128 gb A - Data SP920
  • Sapphire Radeon HD 7750
  • Windows 8.1 Pro CZ

  Now, I know, it is a very low Setup compared to other builds here, but I was hoping that it would work very well for my workflow Full-HD amateur clips mostly under 30 minutes.

  The problem is when I activate the acceleration of the OpenCL, all clips with stabilizer warp then become about 1/4 of the preview window; he wears the final render. I tried this with the AMD card and without it (OpenCL have enabled with the Intel's HD4600). Nothing helps.

  

  Now the funny part is that I used to have that same card in my old system. running on a Gigabyte obsolete UD3 with core i5 750 inside and... IT WORKED! It is with the same first version, running on the same OS. I dropped this computer a few days ago, but my new computer has this problem inexplainable.

  The build is not the question, because I got the test computer and everything is stable with decent temperatures.

  I'm also having a lot of crashes when editing, but I think it's because of the infamous suite S.redgiant which, as I read on the forums is probably to blame. It's ok, I just need to save often. Neat video could be better? Does anyone know?

  Another problem is sluggishnes and offsets when my clip reaches beyond 30 minutes; I don't think it's ok, my videos produced with EOS M should not be demand for this configuration. When I monitor the use of the ram, it is never more than 8 GB (and Yes, I welcomed CC to use up to 13 GB of total ram); other resources are also almost inactive during editing.

  The sluggishnes and the offset is however still worst in SpeedGrade; there when I move a slider, I have to wait seconds! Somehow, it improves over time, but again, I have just notice now that this software suite is very very poorly made. I am pleased, that I do not use it to make money...

  Please correct me if I'm wrong and that all the links that could help me solve problems are very welcome.

  Kind regards

  Jan

  Thanks for the report. We believe that we have identified the problem and are working on a fix. At the moment the solution renders in software mode.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• First actually made 'Frame not parsed for stabilization; Press analyze"on the actual video?

  When you put the Warp stabilizer on a few sequences, you will be asked to analyze images so that it can stabilize.

  Some of my clips, apparently went not analyzed, and when I made my video (which took several hours), melted pictures made the "Frame not parsed for stabilization; analysis of press' blue WARNING in it. The warning made as if she was part of the film itself.

  If it's supposed to happen? This is really shocking.

  Moreover, I wish that the rendering process would have lived and analyzed all the sequences and the application of all the effects before the release of the final product.

  Hi LeeHyori,

  You see, this is the correct behavior, but I don't understand how this is not desirable.

  If you do not want to see it changed, please add a feature request here

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&loc=en

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• Make the button "greyed" out / unclickable

  Ranking currently footage Prores422 HQ in SG CC 15 which will just be made out in the same format so I can still change at the FCC. In the last two weeks, I found the button "made" on the software greyed out or unclickable, regardless of changes in the format, sizing, etc. for rendering. He was able to render well before been there before and I did not any changes to my preferences or program during this period. Uninstalled and reinstalled 3 times, and the problem persists.

  Just do a simple ranking for Uni, films of 15 minutes work max, 25 fps, all were made well in advance during the rough edit, but now to the fine / final cut of the program failed.

  Final cuts have been classified as a new project, stage detected, and then graded accordingly.

  Looks like stored in specific folders and never move.

  No matter what information you need let me know! Thank you

  There was a thread here not long ago on render-out grey problems. If SpeedGrade has any problem with any information you have entered, it will not export... but does not TELL you what he dislikes. If you need start to change what we both and see which parameter you entered is the 'wrong' to Sg.

  Here is my answer to the last question on this...

  ----

  The problem is probably it does not find your codec instructions set up correctly OR not that the codec you chose it is quite 'there '. Right now, my machine is the thought that things DNxHD is not usable... even if it is all "loaded" and appears on the options within the Sg. But as soon as I chose a different codec that he thinks is ready, 'Render' text becomes white and makes it now. Working in the codec options a little more, all my DNxHD codecs now work that they just took some fiddling.

  Neil

  ----

  Neil

• Can I change the default settings of stabilizer Warp?

  I want to change the percentage of default stabilization at 5% (instead of 50%) so I don't have to change it every time. Is there a way to change the default values of this effect, it will always apply to 5%?

  You can try saving it in a preset, just click with the right button on the effect in the effect controls panel and choose Save preset.

• Can I export data from stabilizer Warp?

  I have two identical video clips, they match frame, but one of them is less exposed and is much darker. Therefore, it is much more difficult for the stablizer to work chain.

  Can I somehow export the data from the stabilizer of chain on the clip that it works on to apply the slot exposed clip?

  I would use Mocha to stabilize the shooting, but I'm having difficulty with it, as it requires executives to match all along and my shot turns.

  
  

  Any help is greatly apprecaited TIA

  If you have identical pictures then you have either a motion control camera, and even then it is highly unlikely to be exactly the frame for frame unless the platform was very large, heavy and expensive and your players were robots because anything moving in the scene would throw off the coast of the string stabilizer or the camera has been locked and there is nothing in the scene. There must be some differences in the shots or there is no need to work on one that is under-exposed.

  Nothing prevents you to do exposure or calibration adjustments on the original clip and then before the composition of colours or made a pure copy and warp stabilize this clip. I don't think that anything else will not work.

• Reverse the clip and stabilizer Warp together?

  I often stock b-roll, which I think would be better if the offset of pan or update is reversed. Often, I would also smooth while using the stabilizer deform. Unfortunately, these features do not work together. At the moment the only way I can think to get around this is to encode images in a new inverted file, import the new file in the project and apply then the stabilizer deform. It's a little complicated. Anyone know better?

  Reverse the clip, nest and then add Warp.

• Clips on the timeline in PP display color bars after the use of stabilizer warp?

  Hello, hoping someone can help here as I have tried and can't work on what I have done. I use CS5.5, 'replace with after effects', I used to send clips to AE, and then used the deformation of images of stabilse stabilizer. Effect could be seen on PP project and was going well. The re open my project some time later I noticed color bars showing on these clips on that I had used the warp, the play still clips stabilizer, but they show a brief shot of the colored bars. I think it may have started after I made my PP project? If I drag these elements in the source panel just as I see the colored bars is changing and still it will play in the workspace of the timeline, I tried to export to the encoder and all I get is the color bars. I'm sure I've probably made a simple mistake here, but I can't cope and hope someone can help me here.

  Thanks in advance

  Open After Effects clips projects are in and make sure that everything is fine.

• "Back button" greyed out initially?

  This happens when I launch firefox or open a new tab:

  I for example on a Web site first, and then I click on a link to another page or Web site. The button is dimmed, even if I just entered a new page.

  The second time I click on a link, the back button will start working.

  Happens that the first time that I click on a link in a new tab, but it can be really frustrating!

  This was happening on an older version of firefox, so I've updated to the latest version, and it still happens.

  This is caused by the addition of McAfee Site Advisor. If you disable or uninstall the back button should work properly again.

• Button grey video chat out on android?

  The video chat button is grayed out on Android. This is the latest version of Skype. Im running on a Nexus 6 p located on Android 6.0.1 which is the latest version. The microphone works and I can hear everyone. But I do not see someone else was a video of. Other buttons that are grayed out are 'Add' and 'more '. Do not click on those. Everyone is running on a computer, so I don't know if that's the problem, but if so can someone please fix it? It's a real disappointment is not not able to video chat on devices.

  Hi, thanks for the reply and sorry for taking so long. I found the problem, it's because the people who called me using an obsolete version of Skype. Thanks for your help anyway

• Cannot find NI0DAQmx devices on the network. Test Panel button grey

  Hello

  I have a Dell than T710 Win Server 2008 R2 64-bit. NidaqMX 9.3 is installed. The dialog box search for network OR-DAQmx devices cannot find my NI ENET-9163 carrier with a card NI 9215. This card has a static IP address in the same subnet as the LAN of the PC port. I ping the device.

  However in the search network OR-DAQmx devices dialogue box I can add the Board manually by specifying the IP address. This seems to half work as long as it saves the map MAX, but the test panels button is grayed.

  I installed Nidaq MX 9.3 on my win 7 64 bit laptop and I can find the card properly and test it. Clearly there is something wrong with the config on the Dell software, but I have no idea what. Any help is appreciated. I stumbled on, IP addresses etc. I also disabled the 3 other network ports on the Dell server in case that is the question.

  Thank you

  Andrew

  Hello Andrew,.

  I could do some tests on our Windows 2008 R2 server. I was able to replicate this but not as easily as you did. We have 2 network adapters on that server. We have solved this problem is to do the following:

  1. disable IPv6 IP addressing all the ports of the network.

  2. change the metric of the Interface on the network adapter. We have high, so a value of 50. You can get this metric by going into the properties of your network card > your IPv4 properties > advanced on the general tab > UN select Automatic metric and replace with static. (the entries are 1-60). Do this for all of your network adapters. Given that we have this setting that we have never seen the question re occur.

  We also checked that it doesn't happen at all on the new cDAQ-9181 chassis. This chassis is intended to replace the ENET-9163. If it is possible for your upgrade I would recommend this option. You should be able to work with your local sales channel to get one to test with. We have 20 + 9181 in this system and have never seen the issue of not being able to Max commonality to the chassis.

  Let me know your results to adjust the parameters I mentioned above.

  Thank you!

  Corby

  CDAQ PES of R & D network

• Why the 'Analyze' button is disabled?

  I was wondering why the 'Analysis' button is disabled in the new disk optimizer tool. I'm able to optimize partitions of hard drive of my computer as usual, but I can't check if it must be optimised beforehand.

  Is the drive a SSD or Solid State Drive?  If so, that's why.  These readers of should not or never be defragmented.  It puts much wear and tear on the device that have a shorter life expectancy.