Anchor points are moving wrong

Similar Questions

• My anchor points are moving on their own

  Help! I do an illustration of polygon for a job which can have several future applications requiring a scaling for different sizes. However, as soon as I started to draw, my anchor points have been flapping around and objects evolved out of the spot where I placed the. Frustrating as it is. I finished the drawing, all tied up with the options "Align" keep, but now when I try to narrow the Group of polygons, for example, the form A3 of drawing in an A5 invitation, everything falls apart at the seams. At one point, even my fonts indicated erase us the curves and losing paths when I shrunk the. Now, the question seems to be intermittent (my intern even got the superstitious idea that it must do a few feet from my computer to prevent it from happening) but it is especially frustrating because I need to create more than three or four of them as soon as possible!

  

  

  If Snap to grid of pixels turned on?

  Select your objects and uncheck the box in the processing area. Then uncheck Align new objects to the pixel grid.

• Why my anchor points are moving when I'm United objects?

  I converted text in vectorised text and when I go to unite in action to become an object, Illustrator is editing location of anchor points and vectors. Why it does this and how I can change if it is no more?

  Check to align on the pixel grid

  Illustrator: Problems with snap to grid of pixels

• Help please! After the installation of el capitan, the anchor points are not visible in illustrator CS5!

  After the installation of el capitan, the anchor points are not visible in illustrator CS5. What can I do?

  Sun,

  Outside of this (possible) case, there is no report confirmed the successful performance of CS5 on El Capitan:

  Illustrator CS5 quit unexpectedly in mac os x 10.11.2

  Are you sure that you have shown (alternating with Cmd + H) edges?

• I have the latest version of Lightroom CC2015.  My problem / question is with the Radial filter.  The circle, PIN and anchor point are not displayed.  Ask for help via Chat told me to uninstall and reinstall.  This does not help / correct the problem

  Can someone hepl with Radial filter / circle, PIN and anchor point are not displayed.  Thank you

  Try asking your question in the Lightroom Photoshop Lightroom forum

• Brush tool anchor points are gone is some now how put back them?

  Brush tool anchor points are gone is some now how put back them?

  Press the H key to hide/show the anchor points. The Brush tool must be active when you do this.

• Moving anchor points and the whole shape gets distorted to change the line weight

  I have a fairly simple drawing that I drew in a larger size, so I could be more specific with it, and now I want to reduce up to the finished size and thicken the line, but when I make the line thicker, my anchor points are moving and the whole drawing is distorted.

  Using Adobe Illustrator of 24 years, I never saw that happen. When I click on the "up" arrow in the stroke palette a lot of time to gradually increase the thickness of line, I can watch made anchor 'walk' around like my shape gets distorted.

  If I go to the place a numeric value for the thickness of line, it doesn't.

  However, if I use the scale tool to shrink the design down to the size of 10% or 20%, or whatever, with traits of the scale and effects UNCHECKED, yet once, move the anchor points and the drawing is distorted.

  It's all about a brand new installation of Illustrator CS 6 for Mac (although I use CS 6 for about 2 years now, my hardrive crashed this past weekend and I had to reinstall everything).

  I missed a little box somewhere that I never saw elsewhere that is what actually happen?

  This post editing to add:

  Also, some of these objects in my drawing I cannot change the race less than 1 point thickness. If I choisis.5 ou.25 pt in the context menu, or even if I enter the numeric value, it jumps to 1 point. Other objects in the drawing are not.

  These objects in question are "rounded rectangle" forms I used the scissors tools to cut and then used the "join" command to put them as well as other forms that have been "scissored"as well."

  All forms of "Ellipse" and "Rounded Rectangle" that I have left intact do not exhibit this problem with stroke and distortion.

  You are being bitten by the Align-to - pixel grid. Select the entire document and go to the transformation Panel and turn off snap to Pixel - grid at the bottom of the Panel. Then go into the rollout (small triangle in the upper-right) and disable align objects on the pixel grid.

• What are the anchor points

  When to use the anchor?

  Anchors are used to reference sections of a page. They are used in the same way as regular links to URI (menus, buttons, etc.) but will take you to a place on the page (or another page).

  Anchor points are generally used on single page sites.

  David

  http://creativemuse.co

• Suddenly sees anchor point handles paths.

  Hello. I'm working on a file in Illustrator CS5. All of a sudden when you use the direct Selection tool - handles and anchor points are not visible without worrying whether selected or not. They are simply not their appearance. They exist however. When I click-and - drag to select an area where I know there is an anchor point and then I use the keys keys to move the anchor point - I see the path change. But I don't see the point anchor I'm moving.

  It's all the product only on a particular file. When I open a new .as file and try to reproduce the problem - everything works fine.

  Any ideas why this is happening suddenly? I guess I accidentally hit something to change a setting, but what I can't understand. I have checked the selection and display of anchor in preferences, but can't find anything different there when comparing it to a file where everything works normally.

  Thank you

  View > show edges

  Or view > see the bounding box

• I can edit the Bézier handles symmetrically with Anchor Point tool?

  In CC when using the pen tool on PC, I like the way that you press Alt and Anchor Point tool allows to modify Anchor Points and paths on the fly. But to convert an anchor point in the curve, the Bézier handles soar symmetrically compared to start but after letting go, I can only go back and modify the handles independently using this tool who loses the symmetry and therefore the sweetness in the anchor point

  Is it possible to edit the Bézier handles symmetrically using this tool after the initial conversion of the corner anchor to smooth?

  Thank you

  N °

  If you want to change the handles symmetrically, so that they are uninterrupted - direct face-to-face and the same length, you have to start over - drag - click on the anchor with the anchor Point tool.

  I don't think you should use the Alt key

  After that, assuming that both handles are uninterrupted, you can click drag with the direct Selection (white arrow) tool on the end of handles and the curve will remain smooth as handles to remain intact.

  so in short, use the direct Selection tool (press and hold Ctrl), if you want to change unilaterally, without breaking the 2 handles.

  Can be useful for checking-

  Edit > preferences > display the selection anchor > see Managing when several anchor points are selected

• I'm working on an evaluation version (NL). There are no categories in my insert Panel. So I can not insert a PA element or a named anchor point or... etc. I have download the wrong version?

  I train on a trial version 2015 (NL). There are no categories in my insert Panel. So I can not insert a PA element or a named anchor point or... etc. I have download the wrong version?

  It has changed a lot since CS6 DW is released in 2012.  Often people read the tutorials that have been written for this version and do not understand that it is more relevant for DW CC.  Below of the links that describe in detail the changes in each version.

  List of deprecated features:

  http://helpx.Adobe.com/Dreamweaver/using/the-new-modernized-Dreamweaver-cc.html

  New features in CS6 12.2

  2013.html http://helpx.adobe.com/Dreamweaver/using/Whats-New-Dreamweaver-Creative-Cloud-Release-Feb-

  New features in CC 13.0

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-CC-2013.html

  New features in CC 13.1

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-131.html

  New features in CC 13.2

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-13-2.html

  New features of CC June 2014

  http://helpx.Adobe.com/Dreamweaver/using/whats-new-2014.html

  What's new in October 20141 CC & February releases

  https://helpx.Adobe.com/Dreamweaver/using/whats-new-2014-1.html

  New features of CC 2015

  https://helpx.Adobe.com/Dreamweaver/using/whats-new.html

  Nancy O.

• The tolerance setting works for the "Convert anchor point tool"? Are there other ways?

  Hello
  I wonder if the setting "tolerance"in the preferences only works for the arrow tools?» I put it to 8 pixels and it seems OK for these tools, but when I use the tool 'Convert Anchor' point it is incredible difficult to hit a point for me. It seems that I have to hit a point exactly one pixel, which is hard with a screen high resolution.
  My PC keeps beeping all the time and I'm getting crazy on this subject...
  It seems that the framework of tolerance doesn't work here, I'm right? There are other parameters that could help me to work with this tool?

  Sorry if this is the kind of a beginner question, I have much experience with PS and LR, but not so much with Illustrator (and I couldn't find anything useful in the internet).

  Thank you
  Raschko

  I agree, it is sometimes difficult to click on the sweet spot. Here are 3 proposals:

  1. Pay attention to the cursor icon. This will change when you are on a point anchor or direction.
  2. Try to turn on 'bearings commented. They can be a nuisance, but they are sometimes useful.
  3. Use the button "convert" on the Options bar. They may take a little longer but they are full-proof, moreover, you can convert or remove several selected points simultaneously using this method.

  

• I can't move the anchor points on a shape, I've drawn with the pen tool.  There are also small circles with a point in them (think focus), who they are and they are part of my problem.  If I open a new document and draw randomly everything is good, no foc

  I can't move the anchor points on a shape, I've drawn with the pen tool.  There are also small circles with a point in them (think focus), who they are and they are part of my problem? If I open a new document and draw randomly everything is good, no anchor and focus points behave.

  Bubble icons are the widgets corner. You can drag inward to round the corner. They are not part of your problem. If you want to hide them, select view > hide corner Widget. I have a hotkey defined for this menu item.

  If you see multiple bullseyes, you may have your set with the shape selected, that would prevent you from being able to move individual anchor points. Deselect the shape first, and then move the anchor with the direct Selection tool.

• Why are anchor points and bounding boxes is visible overprint preview?

  I've recently updated my CC 2014-2015 CC Illustrator and have noticed a really annoying change. I can only view/edit the bounding boxes and anchor points, while in the overprint preview. In the view/show edges and view display the bounding box does not help. It shows it as being already visible. Anyone else having this problem?

  Disable the GPU performance. (There is an icon of rocket to the top left of your window).

• a scrolling page site, why the anchors are moving as well horizontally than vertically?

  I created a site to scroll one page, my problem comes when I added anchors. Seems that each time the button that brings me to anchor it moves my page as well horizontally than vertically. I have not had this happen before.

  The page is http://www.bhppromos.com/Lookandlive.html

  Thanks for any help.

  Hi Dan,.

  In Muse, when you click a link to an anchor, Muse is trying to align the anchor point to the top left of the browser, that's why you see a vertical movement. To resolve this problem, I would recommend that you line up your anchors on the left margin of the browser.

  - Abhishek Maurya