Driver does not work with G32-304TX

Similar Questions

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• my hybrid HDD/SSD drive does not work with my new Y50

  my hybrid HDD/SSD drive does not work with my new Y50

  Help!

  Hi YouMaCry,

  You have any records? or a USB recovery?

  If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).

  To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!

  See you soon

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• Network adapter driver does not work with the recovery discs provided by hp

  Hello

  My wireless light does not illuminate. The network adapter driver does not install from the recovery of the driver CD.

  Here is the hardware ID. Please provide a link to the drivers:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  Thank you

  You are the very welcome.

  It does not sound like a heat problem.

  I don't know a lot about the repair of hardware issues beyond replacement memory and hard drives.

  I could try to clean the area of fan/radiator with a can of compressed air and see if that clears any dust that may accumulate.

  To do this, disconnect the laptop from the AC adapter and remove the battery.

  Insert a rod through the air fan to keep the blades turning when you spray air.

  Spray through the air intake fan and watch to see the dust out of the exhaust.

  Repeat once or twice and blow air from the other direction of the drain line to the fan.

  The other driver, you need is the driver of protection Protectsmart hard.

  See if it works.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

• Canvio Plus 2.5 "1 TB external HARD drive does not work with USB 3.0

  I've had this drive for about a month.

  I am on Windows 7

  I can only operate by connecting to USB 2.0 ports. It is then visible in 'My Computer'.

  If I connect to USB 3.0, it turns on the case but does not appear in 'My Computer'.

  I tried it on all my USB ports 3.0 - up on one and two in the back of my case.

  I checked my BIOS and USB 3.0 is enabled.

  I tried to follow the suggestions in the user manual, but the drive does not appear in the management of so connected devices on USB 3.0, but it does when connected in USB 2.0.

  Any ideas?

  Hello

  As much as I know the Windows 7 system requires installation of additional USB 3.0 driver.

  Many laptops and computers use USB 3.0 driver that was released by Intel... it is because of Intel chipset...

  I guess that USB 3.0 is already installed, but probably you need to update the driver at least to the newest version...

• Toshiba HDD Protection - Shock Sensor Driver does not work with Vista

  I have improved my Tecra M7 for Vista Ultimate last weekend and there are a number of things that do not work. It's very frustrating because I followed the procedures shown on this website diligently upgrade and will have problems.

  Can someone tell me what zip file contains the utility Toshiba HDD Protection shock as I installed everything (except the Config Free because the Zip file seems to be corrupted) and I can't find it anywhere. I noticed that when Vista was recommend the automatic updates after installation it is recommended an updated driver for the HARD disk Protection utility, but is nowhere to be seen and I can't find an installer for anywhere. Does anyone know how to handle this?

  Thank you very much

  Chris

  I don't know if it will help, but try to use the utility disk for Tecra M9 protection.

• Satellite X 200: WLan driver does not work with Windows XP Home edition

  Hello

  I'm trying to get WIFI on my Satellite X 200 XP. I downloaded the drivers of these 'wlan-intel-1244-7147"but still no luck, also after installing these drivers, I get an error when I stopped saying" sample program does not.

  This is a new installation of XP complete, I gave up with Vista.

  You have an Intel WLan card or the card Atheros WLan?

  Perhaps you have used a just a bad driver

• USB Flash drive does not work with Windows 7 Pro 64-bit

  I have several USB thumb drives, some of them do not work when I plug them in while others work very well. By experimenting, I reduced the problem with the 64-bit Version Windows. All of these USB keys works well in my other computers that have 32-bit installed and also even computer with the 32-bit version installed on different hard drive. All of these thumdrives are detected immediately and works without a problem. The 64-bit version, I have uninstalles and reinstalled readers, drivers updated for readers and controllers USB chipset, reasigning letter drive without a resolution of the problem.

  It is interesting to know that this problem only occurs with some discs that I (like Ativa 4 GB, 4 GB generic and Verbatim 4 GB). While I discovered that you can do all the nonworking day thumdrives work once if you shutdown computer and plug the thumdrive into the USB port and the computer to boot, boot time is longer than usual and when it is operational in 30 to 45 seconds drive appears in the list of devices and you can read, write and format normally without any problem to experiment. When you pull chase him and reconnect to USB port after 10 seconds same problem appears aggai. First of all, you get the message that the disk must be formatted and if you try to format you will get a message that windows cannot format the drive. If you try to access the drive, you get message that Drive is not accessible. If I take this player and plug it from 32-bit without problem, you see all the files in the drive and are able to read the writing and the format is normally.

  I'd appreciate if I am able to get an answer as a way to solve the problem.

  Pavan

  When you disconnected the battery of the laptop, you did, be sure to press and hold the power button for about 10 seconds?  This causes the rest of completely discharge power.

  This tip came in practice more than once in my experience.   ^_^

• The satellite A65-S1063 DVD drive does not work with this type of disc

  Hello world
  have a strange problem - my combo does not read dvd - r of a box. Everything is ok, when I put a disk anywhere else, but in this particular area or empty or written are recognized, it crashes just after trying to read and the lamp burning. The most funny thing is that when I check the discs on other computers, everything is fine with them. Any ideas?

  Hello

  For me it s case. You have updated firmware and this kind of DVD is not listed in the list of firmware. As Stefan has suggested, try a different brand of DVD.

• E300 satellite - DVD Ram drive does not work with Win 8

  Hello

  I get an error message on my dvd - ram drive - Mat * un UJ8A0AS DVD-RAM

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I tried the solution of Microsoft Web site for this problem, but it did not work.

  Is someone able to recommend a fix for this problem. Tried to uninstall and reinstall the device without result.

  Have you tried to remove the device from Device Manager and reboot the laptop?
  After reboot of the device will be recognized and installed again.
  Please, do it and see if the problem still occurs.

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• NVIDIA 320.49 driver does not work with premiere cs5

  I've updated my nvidia 320.49 driver, so first cc can detect and work with cuda. But first cs5 cannot play the video with the new driver. It worked fine with 296. If I use 296, first cc cannot detect cuda.

  All solutions? As a switch for different versions of first nvidia driver?

  Any driver pre 320 xx apprear solid.

  Peter Garaway

  Adobe

  Premiere Pro

• STOR. E partner HARD drive does not work with USB 2.0

  Hi all

  I recently purchased a 1 TB STOR. E partner HDD and it worked without any problems on my laptop Macbook Pro which has only USB 2.0 ports.

  A few days ago, the HARD drive has been disconnected from the laptop without ejecting first, and now it isn't recognized more than my laptop.

  I tried on a PC Windows with USB 2.0 and 3.0 ports and discovered that it is recognized when I plug in the port 3.0 but not on version 2.0.

  What should I do to have the HARD drive works again with USB 2.0?

  Many thanks in advance,
  Eduardo

  > I tried on a Windows PC with USB 2.0 and 3.0 ports and discovered that it is recognized when I plug in the port 3.0 but not on version 2.0.

  Stor.E partner HDD needs maximum power of my 900.
  The USB 2.0 port provides 500mA just
  If you can connect the HARD drive to two USB 2.0 ports using a USB cable in Y
  Or another option: connect a USB hub with external power supply between the HARD drive and the USB 2.0 port