Why my anchor points are moving when I'm United objects?

Similar Questions

• My anchor points are moving on their own

  Help! I do an illustration of polygon for a job which can have several future applications requiring a scaling for different sizes. However, as soon as I started to draw, my anchor points have been flapping around and objects evolved out of the spot where I placed the. Frustrating as it is. I finished the drawing, all tied up with the options "Align" keep, but now when I try to narrow the Group of polygons, for example, the form A3 of drawing in an A5 invitation, everything falls apart at the seams. At one point, even my fonts indicated erase us the curves and losing paths when I shrunk the. Now, the question seems to be intermittent (my intern even got the superstitious idea that it must do a few feet from my computer to prevent it from happening) but it is especially frustrating because I need to create more than three or four of them as soon as possible!

  

  

  If Snap to grid of pixels turned on?

  Select your objects and uncheck the box in the processing area. Then uncheck Align new objects to the pixel grid.

• Anchor points are moving wrong

  I have Illustrator CS6 for mac ox mountain lion. I was working with a vector image and everything worked well. Now when I try to move any anchor point, it acts as if it's not calabrated, for lack of better terms. If I try to move a course it snaps twoards one another, or if I try to set the hadles, they do the same. It does not follow my direction as it did before. Its now impostible to use!

  Thanks for your help!

  PS Im also new to vector art so if its something simple, I'm sorry!

  If you have used it / put some guides, grid snap or the grid of pixels, depending on what you used.

  Mylenium

• Why my restore points are deleted when I restart my computer?

  The computer will not keep a restore point created manually, after I have shut down and restart. I increased the storage for her area in the protection of the system, also I do not see that automatic restore points are created by windows. What is going on?

  Hello

  ·         You have Dual boot for installation on your system?

  If you have a Dual Boot with Windows XP / Windows 2000 then this problem can occur because the restore point does not record if you dual-boot Windows 7 and Windows XP/Windows 2000 installed on the same system.

  If you do not Dual Boot on your system, but again, you are facing this problem then I suggest you to run the Windows Live OneCare safety scanner which is a Virus scan online provided by Microsoft.

  To run the Windows Live OneCare safety scanner please refer to the link provided below.

  http://OneCare.live.com/site/en-us/default.htm

  You can also download and install Microsoft Security Essentials on the system if you don't have any software installed on the system.

  To download the Microsoft Security Essentials see link below.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• Brush tool anchor points are gone is some now how put back them?

  Brush tool anchor points are gone is some now how put back them?

  Press the H key to hide/show the anchor points. The Brush tool must be active when you do this.

• Help please! After the installation of el capitan, the anchor points are not visible in illustrator CS5!

  After the installation of el capitan, the anchor points are not visible in illustrator CS5. What can I do?

  Sun,

  Outside of this (possible) case, there is no report confirmed the successful performance of CS5 on El Capitan:

  Illustrator CS5 quit unexpectedly in mac os x 10.11.2

  Are you sure that you have shown (alternating with Cmd + H) edges?

• I have the latest version of Lightroom CC2015.  My problem / question is with the Radial filter.  The circle, PIN and anchor point are not displayed.  Ask for help via Chat told me to uninstall and reinstall.  This does not help / correct the problem

  Can someone hepl with Radial filter / circle, PIN and anchor point are not displayed.  Thank you

  Try asking your question in the Lightroom Photoshop Lightroom forum

• Why all the results are duplicated when searching in my bookmarks library?

  If I search for "Shell", for example, and then click on the 'name' column, most of the 'results' are duplicated. For example, "Perdido | On Shell"in the"shell"folder Parent is shown twice... same URL and al. I see that the or after the 01/02/2013 added bookmarks are NOT duplicated.

  In my case, the bookmarks ARE actually duplicated. I checked by exporting and by analyzing the HTML code.
  The whole "All bookmarks" hierarchy had somehow been copied into a random location of my favorite tree. This is why all bookmarks except most recent lie twice.
  It looked like this:

  - All Bookmarks
    + Bookmarks Toolbar
    + Bookmarks Menu
       + MY_FOLDER_A
       + MY_FOLDER_B
       - MY_FOLDER_C
         MY_NESTED_FOLDER_A
           - All Bookmarks
              .... older state fully duplicated!!!
  

  I deleted the nested copy of "All bookmarks" and it seems OK now.
  I made this copy by mistake (which I highly doubt) or a bug caused.

  Good to hear that you are not using Firefox Sync (I use it). It would have been a Prime Minister candidate for causing a problem like this. (My bad favorites have been replicated to all of the computers connected with synchronization).

  The copy of "All bookmarks" should have been made over the past months, but I couldn't determine exactly when. The copies have the same ADD_DATE and LAST_MODIFIED timestamp in the HTML file.

• Why vi unwanted records are produced when generating executable?

  I'm using LabVIEW 9, and when I build an executable, it creates 3 unwanted files containing a number of files .vi I do not want to have.  The 3 generated unwanted files automatically are:

  NI_HTML, NI_report, and NI_Standard report

  Why these folders with many files created automatically, and where .vi is the possibility of excluding these when building the .exe?  Ok thank you

  You call any screws dynamically? Otherwise, try to go to the Advanced tab of the build spec exe and deselection 8.x file layout - that should fix your problem

  (let me know if you want to know why because it is an explanation a little longer)

• Why a panel tabs are saved when it is installed in a file of the UIR?

  I started a new application, open a main panel to the IUR, then created a panel tabs on the main Board.

  When recording, the Panel tabs is still missing when the file is re-opened.

  I opened a second panel of test, did the same thing, but the Panel tabs still charges when the second test panel is reopened.

  CVI 2009, version 9.1.0

  Thoughts

  Hey clunden,

  Are you able to reproduce this problem with a new project, or have you seen the problem in a single file UIR?

  It seems that something has been altered in the UIR file that kept the Panel to be registered.  I think that it is unlikely that this is a bug in CVI, but if you're able to reproduce the problem in a new project, please let me know.

  Thank you

  Brandon v.

  Engineering applications

  National Instruments

  www.NI.com/support

• Someone knows why "adding / filter links ' are gray when I try to link a menu item?

  I tried manual menu mode, I went to pages that I want to reassign and set the options of the menu 'include the page without hyperlink '.

  while I could try the reallocation manually... cannot bind to do anything unless I go to a complete dynamic menu... problem is, I want that these menu items.

  but want to use anchor links and wink-scroll on one page in a part of my site... If I highlight ordinary text, no problem. If I connect a graph,

  No problem. Menu is a go though...

  Hello

  Just to confirm, are you facing problems linking your menu manual?

  If so, make sure that you have the selected menu item, not the text in there.

  If it's something else that you are having a problem with, well want to share a screen shot, it would help to understand the problem.

  Concerning

  Sonam

• Could someone explain/link me to a forum that explains why the CR2 files are pink when they are imported?

  I'm new to Cannon and when I shot raw, I didn't believe that I would have a question, get the images on my computer. However, when I imported using a converter, they come out of rose! I turned monochromatic and using a Mark iii if it makes a difference. I did not really find a clear answer. I'm sure it's something simple, I don't get but since I'm used to Nikon, I don't understand and can't seem to find anything to explain it. I really appreciate it!

  What software do you use to view your Raw file? If this isn't Canon DPP, it cannot make your Raw in B & W because the third-party software cannot read the camera settings. If the whole picture is pink, you may have a corrupt monitor profiles. Nikon or canon is not serious in this case.

• Moving anchor points and the whole shape gets distorted to change the line weight

  I have a fairly simple drawing that I drew in a larger size, so I could be more specific with it, and now I want to reduce up to the finished size and thicken the line, but when I make the line thicker, my anchor points are moving and the whole drawing is distorted.

  Using Adobe Illustrator of 24 years, I never saw that happen. When I click on the "up" arrow in the stroke palette a lot of time to gradually increase the thickness of line, I can watch made anchor 'walk' around like my shape gets distorted.

  If I go to the place a numeric value for the thickness of line, it doesn't.

  However, if I use the scale tool to shrink the design down to the size of 10% or 20%, or whatever, with traits of the scale and effects UNCHECKED, yet once, move the anchor points and the drawing is distorted.

  It's all about a brand new installation of Illustrator CS 6 for Mac (although I use CS 6 for about 2 years now, my hardrive crashed this past weekend and I had to reinstall everything).

  I missed a little box somewhere that I never saw elsewhere that is what actually happen?

  This post editing to add:

  Also, some of these objects in my drawing I cannot change the race less than 1 point thickness. If I choisis.5 ou.25 pt in the context menu, or even if I enter the numeric value, it jumps to 1 point. Other objects in the drawing are not.

  These objects in question are "rounded rectangle" forms I used the scissors tools to cut and then used the "join" command to put them as well as other forms that have been "scissored"as well."

  All forms of "Ellipse" and "Rounded Rectangle" that I have left intact do not exhibit this problem with stroke and distortion.

  You are being bitten by the Align-to - pixel grid. Select the entire document and go to the transformation Panel and turn off snap to Pixel - grid at the bottom of the Panel. Then go into the rollout (small triangle in the upper-right) and disable align objects on the pixel grid.

• Illustrator cc 2014 adds anchor points to the guides

  What is happening with the Illustrator CC 2014! I placed a guide for where to add a cliked of anchor point on the Add anchor point tool, but when I select the object I want to add the anchor point that adds an anchor point to the guide! so I blocked the thinking guide that would solve the problem, that it is then for me a poster that says attention please use on a segment of the path it still considers that the guide is a path!

  TIF,

  Are you sure that you select the path, not the guid?

  Maybe it's time to look at the list.

  The following is a general list of things you can try when the question is not in a specific file (you tried/made some of them already). 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  (1) close Illy and open again.

  (2) restart the computer (you can do that up to 3 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• What are the anchor points

  When to use the anchor?

  Anchors are used to reference sections of a page. They are used in the same way as regular links to URI (menus, buttons, etc.) but will take you to a place on the page (or another page).

  Anchor points are generally used on single page sites.

  David

  http://creativemuse.co