Animation of poor quality when published

Similar Questions

• Photos of GoPro of poor quality when it is placed on the Timeline in Premiere Pro

  Hello

  I try to use pictures taken with my GoPro Hero4 in PP. When imported and read in the Preview Panel, the photos seem to be high quality. When I drag them on the timeline, the quality is blurry. I tried rendering and the original use (JPG) and still no luck. Any thoughts?

  What pixel size is your sequence and it is the same as the pictures?

• How to improve the poor quality when importing the .mts files?

  Hey there,

  This is my problem in a few words: I did the sequence with Canon camcorder, not course specifications about but I could dig them out if necessary. Files/clips are in format .mts and are so open bearable quality on my Windows PC.

  However, when I import them into Adobe Premiere Pro (trial version), they lose spectacular quality, can stop at any second, but more important-, they are all "wavy", with almost scratches on the screen, so the resolution suffers a lot. This can be seen in the Timleine, and it's the same when you export.

  When I create a new sequence, there are options to choose the parameters - maybe this could help? Also, maybe I need to indicate some specific settings during export.

  Sound is OK, though the same as in the source video.

  Thank you, any advice/guess will be highly appreciated!

  Kateryna.

  I meant this option:

  

• Silverlight for Mac: poor quality when you watch Netflix on a large or full screen

  Hi, I had this problem for over a month now. When I watch a movie on Netflix, the video seems normal if I keep it to a smaller size, but if I liked or full-screen, the video will begin to Flash and jump. It is irritating enough while watching regular TV shows, but prevents from watching action movies.

  I called Netflix initially, and they had me uninstall and reinstall Silverlight, but the problem does not go far. Usually, I use Firefox, but I tried on Chrome and the same problem persists. I tried to uninstall and reinstall again later than yesterday, but still no change.

  I have a MacBook Pro (late 2008) and am Mac OS 10.7.4.

  I don't think it's a problem with my internet speed, that we have a package for streaming video, and my roommate has no problem watching instant Netflix to the TV with a PS3.

  Thank you!

  Hello

  What version of the Windows operating system do you use?

  I suggest you send the question to the below provided the link and check:
  http://forums.Silverlight.NET/forums/

• Muse edge animation does not work when published

  Hello

  I created a simple animation on the edge, it has exported in the form of .oam and placed in Muse.The problem, it is that the animation is shown as a 'report abuse' in some sort a tip or frame. Animation works perfectly in preview mode. Any ideas?

  That's the problem with BC? or if it will work with a host of 3rd party?

  Site is:

  http://fieryameen.BusinessCatalyst.com/index.html

  Thank you

  Hello

  This problem will be solved once you have improved the site in British Colombia. Each iframe is considered a page and report abuse appears on every page until the site is in test mode. Your advantage seems to animate in iframe and so showing so many report abuse links.

  Kind regards

  Aish

• Thumbnails poor quality when selecting "Stop download" on Youtube

  

  What are the causes that?

  If you go here: http://www.youtube.com/watch?v=6cu8Ycxxwsc or here: http://www.youtube.com/watch?v=GCXHPKhRCVg and do a right-click on the video download and select off, you will see thumbnails are blotchy and horrible looking.

  Why? Not those who are not the clouds...

  Thank you.

  I would like to ask on the forums of YouTube.  This is not a problem with the drive.

• Poor quality of the sound in the timeline and export; very well in the Source?

  Hi all.

  Newbie-Pr but experienced pro audio digital. I am confused and I know I am missing just something somewhere.

  I made a video for one of my songs. The graphics are quite (in AE), imported Pr and everything what is superb. I import the final audio mix and it sounds very poor quality when played the chronology and the final output, regardless of the format (I tried several presets and custom as well settings). I played a bit and noticed that the audio sounds fine when played in the Source window inside the Prime Minister.

  The session of Pr is comrised of 18 video tracks (not all playing at the same time, of course) and a stereo audio track.

  I tried to re - export audio from logic to depths of different bits, sampling frequencies and formats of file (mp3, wav, AAC, etc.) but the results are the same each time: Source (Pr) sounds very good, logic output sounds very well made / reading of the timeline looks very bad quality mp3 and produces final sounds just as bad.

  I tried everything I can think of. I hope one of you can show me what I'm missing.

  TIA!

  Mark

  First Pro CC

  Processor 2 x 2.8 GHz Quad-Core Intel Xeon

  Memory 8 GB 800 MHz DDR2 FB-DIMM

  Graphics  ATI Radeon HD 2600 XT 256 MB

  Software  OS X 10.9.1 (B 13, 42)

  Thanks for the reply!

  I lived the same results, no matter what I used the export settings. In addition, the poor quality of the sound was present in the timeline itself, without even exporting the project.

  Finally, I lifted my hands, has launched a completely new project, the same audio file in drugs... sounded good. Copied / pasted the video clips in the project original, broken and boom, everything is fixed. Yes, corrupted file Pr, it turns out. All I had to do was start a new project and import all the old components.

  I had to do that in logic a lot (more and more these days). I wish just that I had tried 10 hours earlier! HA.

  Anyway, problem solved and many thanks!

• Safe fonts Web does not support the Norwegian letters æ, o and a. when published. We do not want to use the fonts listed, because the quality is not good published wen.  Any tips?

  Safe fonts Web does not support the Norwegian letters æ, o and a. when published. We do not want to use the fonts listed, because the quality is not good published wen.  Any tips?

  Hello

  Please try to use the glyphs Panel available with Muse.

  Adobe help Muse | Use of text

  It will be useful,

  Sonam

• Troubleshooting: animation will not preview in the browser or when published

  I created a number of edge successfully Animation files, but I encountered a problem with a file that will not play when published or when you use the "Preview in browser". It is visible at the start but not auto play. Tips to solve this problem? Using Firefox 21.0 FWIW.

  Chris

  Found the answer to my question: http://www.adobekb.com/inserting_edge_content.html

  The box "autoplay" in the step properties tab was not verified.

• Camileo X 200: poor quality using Slow Motion

  When I select function Slow Motion (snail) the image is of very poor quality and with noise.
  It's as if the camera was defective.

  Would it be useful?

  + Why don't I have a "fuzzy picture" on my camera, Camileo? +
  http://APS2.toshiba-tro.de/KB0/OPT0602Y40000R01.htm

  Check if Macro-mode' is enabled. In this case, disable this.

• Satellite A350 - webcam is of poor quality

  Integrated webcam quality is poor (a350)
  Is this normal for this computer?
  Switches only light black screen shown in the night on Skype and is even worse.

  Hello

  The picture quality could not be better because of the darkroom where you use the webcam.
  You should increase the brightness in the room and need to set the parameters of the webcam in night mode!

  See this Toshiba document:
  + Bad image quality when using the internal webcam under dark light conditions +.
  http://APS2.toshiba-tro.de/KB0/TSB8A02G80000R01.htm

  or this:
  + How to change the settings for the built-in webcam If the image is very dark or black +.
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

• Satellite C660D webcam very poor quality

  Hello

  I bought my laptop 2 weeks ago and have only begun to use my webcam today.
  It is of very poor quality and flashes.
  What happens during the day in a good light as well when it's dark outside with light.

  My os is windows7 x 64.
  Yes, the plastic film is out of the front of it, I checked.
  I reinstalled the driver twice and is still the same poor quality.
  I restarted the process in both Device Manager.

  Please help I can't think of anything I can do.

  I put t know which model of laptop you have, but Satellite C660D has generally not HD cam but 0.3 M Pixcel camera only. And with this cam, you can't expect excellent image.

  There is nothing you can do. If the cam is installed properly, you can just try change the settings of the cam in the hope that the image will be a little better.
  When I compare 0, 3 m pixcel cam on old L300 and now 1.0 M (HD) Pxcel camera into my new P500 the difference is simply huge.

• Bad quality when taking backlit pictures

  Hello, I have a problem with the poor quality of the photos when shooting to light. I tried all modes in the stage and was unable to remove the spotlight. Also one with the same problem with the video

  software Rev: 23.4.A.1.232

  photo examples:

  https://Yadi.SK/i/L__zl9tloj5VT
  https://Yadi.SK/i/xE_GS7skoj5br
  https://Yadi.SK/i/Os2dHhk_oj5fS

  video example:

  https://www.YouTube.com/watch?v=ydl63so1OvU

  Your goal may be scratched, I see some areas in the photos looked too soft even for the enormous level of ISO applied. Try to inspect your lens under direct and bright light. Even the scratches can be fatal and you need to change the back cover.

  Second, you must learn how to work with camera in such conditions, even though the camera Sony algoriham a poor for Torch light suspension, such as LG and a few others have also. You should then try manual mode, ISO 200 or 400 max limit or set the scene mode.

• Mark jump Hard Case BlackBerry blackBerry 10 poor quality

  When I bought my jump was disappointed by the lack of protection cases available, even not an otter box option. So I went with the BlackBerry brand flex shell case. Very poor quality, I love you design with the stand, but I have less than 3 months the plastic cracked in the corners or the stand broke. What are my coverage options? I have I very disappointed.

  Hi @El1007891

  I'm sorry that you had a bad experience

  If you do not already have to discuss coverage options, you must contact your point of sale.

  Thank you!

• Poor quality and poor framerate with best export settings

  Hello, this is my first post, I searched the forums, watch videos on youtube, etc, but don't never came across something like this before, but anyway let's get down to the heart of the problem at a time!

  I am currently using Adobe Premiere Pro CS6 (Version 6.0.2)

  Specifications of the PC

  -Intel Core i7-4720HQ CPU @ 2.60 GHz

  -16 GB OF RAM

  GTX - 960 M graphics card

  The problem:

  I have been using CS6 6 months now and not had a problem since day one.

  The videos that I do are gameplay videos captured at 60 fps 1080 p with 36857 Kbps Total bitrate.

  The videos where export with large 60 fps framerate, quality, as it should in the first place.

  But everything changed one day after I did everything with the same agenda, as I did each time and video when exported was of poor quality and the rate was 30 frames per second.

  BUT, when I am trying to check the properties of the video exported, everything is as I put is on the export settings, even if the vacuum has dicreased quality and bad frame rate (30 fps) up.

  I am exporting as follows:

  -Format: H.264

  -Basic video settings:

  -Width: height of 1920 1080

  -Frame rate: 59.94

  -Order of fields: Progressive (it doesn't let me change it)

  -Appearance: Square Pixels (1.0)

  Tv - standard: NTSC

  -Profile: high

  -Level: 4.2

  -Rendering to maximum depth (verified)

  Flow settings:

  -Bitrate VBR, 2 pass encoding (I also made 2 pass, but had the same effect)

  -Target speed [Mbps]: 36,82

  -Maximum Bitrate [Mbps]: 62.5

  Advanced settings:

  -Key Frame Distance 72 (verified)

  Use maximum quality rendering (verified) use Previews (verified)

  I finally understood everything!

  So when I started the project for some reason, I had chosen under the option 'Make and video playback' Renderer: Mercury Playback Engine GPU Acceleration (CUDA) instead of Mercury Playback Engine GPU Acceleration (Open CL).

  After that everything worked perfectly as it should in the first place.

  Thanks to everyone who tried to help me understand my annoying error!