Animation works is not in dps

Similar Questions

• SWF animations works does not properly during export to PDF from InDesign

  I use InDesign CS5 and you have created a document that I want to add interactivity and animations to. I created buttons and page destionations, etc., which all work perfectly when you export to PDF, but the simple animation that I wanted to include do not work. The animations were created in InDesign, then exported as a SWF file and then imported selection placed in InDesign and then exported as an interactive PDF where animations either do not work, have not been picked up or gift does not work as it should. What I am doing wrong, how can I get the animations work properly?

  First of all, if you care about your audience, stop using SWF that has now

  ZERO support on mobile devices.

  However after that make sure that InDesign is fully patched, I would recommend

  Place the SWF file in the PDF file in Acrobat Pro instead.

  Bob

• Animation work is not for card games

  After installation of Service Pack 2 of unsucessfully for Spider Solitaire, solitaire and hearts animation does not work. You have to keep clicking on the maps to see and they disappear until clicking on them again.

  Hello KoryG,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  You can set the level of difficulty and set other game options in the Options dialog box.

  1. Click to open the games.
  2. Double-click Spider Solitaire.
     If Spider Solitaire is not available, you may need to install the game. For more information about installing Windows features, see turn Windows features turn on or off.
  3. Click the game menu, and then click Options.
  4. Select the check boxes for the options you want to enable and then click OK.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After effects paths CC2015/animation work does not correctly

  @Trying through AE classroom in a book.  When you try to apply animations for traces.  they do not work properly? Each path fades in and out of text without movement of path.

  I am running AE on a PC system.

  Sorry, that was the link I meant: bug animation path in text Presets of AE CC2015 (Win)

• Animation works do not with chrome, but works very well with Firefox, IE and Safari (rotation of an object)

  Hello everyone,

  My colleague has created a nice animation that works well with Safari, Firefox and IE but not with Google Chrome, you can see here:

  http://dubinfo.be/animation/

  As you can see, the diamond must be between the two V, but for google chrome, this diamond is not a good position.

  Thanks in advance for your help.

  Dadub2

  Hello

  Your performance indicates that you are using an earlier version of Animate. PL to update your animate with 2014.0.1 or 20141. The issue raised by you should be fixed in these versions.

  You can select the necessary revision of the drop-down list available at the link below.

  Animation HTML | Download the free trial version Adobe Edge animate CC

  Thank you

  Dieudonné

• Why animations work only not on Safari?

  I tested on Chrome and works well, but not in Safari 6.0.5

  Here is the URL http://pierosalardi.BusinessCatalyst.com

  Thank you

  If you have seenig that after July 3, I have all ready pulled out the effect of movement of scrolling in the Muse that was causing the problem. After a lot of testing on board, I discovered that Edge was not the problem. But what gives an oam movement of scrolling effect file in Muse, Safari, for some reason, was not working.

• Creo Illustrate animation works is not in U3D

  Have no experience with Creo Illustrate? I'm creating animations in Creo then export as U3D, everthing works accept animations. The buttons to play/pause of animation are present and the animation slider is also present, but has no effect on the model. I don't know if necessary add some scripts or if it's just a problem of compatibility.

  Thank you!

  You will need to check with PTC - but there is no reference in the documentation of Creo to their export tools U3D support animation.

• Animations work only not for sweeping three-fingered until mission control

  Hello, I'm 10.11.5 OSX and every time that I drag upward or downward with three fingers, there is no control of mission animation doesn't seem fair, I have several users on my macbook pro and this problem only affects users of ideas how I could get back animations? I've tried rebooting and logging in and out of the user but nothing I tried fix it

  I have this same problem and it has just appeared. Weird.

• Page / publication of Hd animated works, not on the web. Due today and I cannot get it to load any host/method that I use.

  Hi there, my animation works perfectly both within the overview of application of the edge and opening the html code of the file locally, but when I host I just get a blank page. I downloaded all the files in the selected publish directory (images etc.) on multiple hosts.

  When opened with chrome console, I get these errors:

  Eception SyntaxError: Unexpected identifier

  2288335530.html:14 uncaught ReferenceError: AdobeEdge is not defined

  When you click on edge.5.0.1.min.js:1 Eception SyntaxError: unexpected identifier, it is said: the file specified does not exist.

  Here's a link:http://www.drivehq.com/file/DF.aspx/2288335530.html?isGallery= & share = & shareID = 0 & = 228 8335530 starts & pay = & sesID = xwrimtbdgrq...

  "I tried checking and unchecking the ' runtime on CDN host" as well, makes no difference.

  It results today and I spent the age run panicked. No idea what to do, any help is really appreciated!

  Not really, but I found it to work more regularly when I upload the entire folder, including the year file and the folder entered (for example if his office in > project > Animation download the project file folder). Also I turned the run time settings disable. Hope this works for you.

• I created an interactive navigation along the animated and imported and that the muse. Animations works very well, but does not have the interactivity. ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur

  I created an interactive navigation along the animated and imported and that the muse.
  Animations works very well, but does not have the interactivity.
  ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur comme il se doit),)
  Anyone have an idea how I can fix this problem?

  Hello

  As you use the edge with muse file you do not put the full URL.

  Please try the code below.

  Window.Open("..) /.. /arbeiten.html","_top");

  Concerning

  ViveK

• OAM animation with slider bar does not not in DPS

  I created this animation to true explanation of wind apparent Versus | Sailing by NauticEd blog

  and it works very well. When I publish as oam and drop in an indesign folio then publish with the viewer content adobe or on my iPad - the animation slider bar won't work. Other animations work very well. Any ideas?

  This is probably because the animation generated by the term is not support or be expected to key events. Likely update HTML code to manage the gestures of touch (and to answer your next question, no, sorry, I don't know how to do this)

  Neil

• Edge animate Drag n Drop does not not in DPS

  Hello guys,.

  I am trying to download an animation with a drag and drop features in my .folio.

  It works like a charm when I preview it in Safari or Firefox from EdgeAn.

  I use a updated the file downloaded from the EdgeHero Web site

  with

  "js/jquery-ui-1.9.2.custom.min.js,"

  "js/jquery.ui.touch-punch.min.js,"

  'css/jquery-ui-1.9.2.custom.min.css '.

  libraries to create a file .oam for DPS

  Here is the code

  () yepnope

  {

  Nope:]

  "js/jquery-ui-1.9.2.custom.min.js,"

  "js/jquery.ui.touch-punch.min.js,"

  'css/jquery-ui-1.9.2.custom.min.css '.

  ],

  full: init

  }

  );

  function init() {}

  var point = sym.$("Stage");

  rectangles var = ['blueRect', 'greenRect', 'redRect","pinkRect"];

  for (i = 0; i < rectangles.length; i ++) {}

  SYM. $(rectangles [i]) .css ({"text-align": "Center", 'position': 'absolute'}) ;/

  .draggable ({$(rectangles [i]) sym.

  return: true,

  containment: Stadium.

  grid: 20 (20) and

  opacity: 0.35

  });

  }

  SYM.$(rectangles[0]). AddClass ('correct');

  quick release box

  dropBox var = sym.$("dropCase1");

  dropBox.css ("position", "absolute");

  dropBox.droppable({)

  accept: "reason."

  Drop: function (event, ui) {}

  SYM. $(rectangles [0]) .draggable ("option", "back", false);

  read the chronology of symbol box

  var box = sym.getSymbol ('box');

  Box. $('reward').html ("< other > Correct'").css({'text-align':'center', 'font-family':'source-sans-pro, sans-serif'});

  Box.Play ();

  }

  });

  }

  It does work on the Iphone, or on the Desktop Preview in InDesign CC.

  My other animations work very well with the DPS, but there are no custom .js libraries.

  Any IDEAS?

  Thank you!

  Hey there,

  This is a problem known with Animate - we do not currently support packaging everything you decide to include with your publication and as a result they are not be included in the OAM drop external libraries.

  BUT.

  To work around the problem, you can try to decompress the OAM, manually adding the libraries, and then repackaging the CAO. The discussion on this thread might help you: http://forums.adobe.com/message/5834409

  We'll also be resolve this in the next version of Anmate, which will be available soon!

  See you soon,.

  Sarah Hunt

  Product Manager, Adobe Edge animate

• Animation of edge not woking on remote server?

  Hi I'm new on board and experiencing problems get my file animated works on a remote server, it's a simle animation (moving background image).
  It works fine on my local computer in Dreamweaver and preview in the browser (s) ok? I thought it may be something to do with the .js files that links from the html file? but not smart enough to work on ime?

  Any help / pointers would be much appreciated...

  Lee.

  This is where the files are located...

  http://bondagetips.co.UK/stew/

  You do not have download the sub folders.

  There should be a required subfolder called /edge_includes with a few files it contains.

  If your project uses images, then it should also be an another subfolder called/images.

  In its current form, it loos you have copied images and edge.1.5.0.min.js out of their respective folders files and placed them in the root.

  Darrell

• Animation works in test stage only, how can I save to GIF format?

  Hello!! I'm a little trouble in flash and im almost ripping my hair out!

  Ive done an animation and I want to save it in a GIF file, but the animation works in a test of the scene, and in the other test, the animation has a problem and cuts out before completing. Of course, Ive made some mistakes somewhere do you know if theres test of some sort to save it in a gif of the scene? I don't know why the scene and the other should work differently. Help, please! Ill be ever so grateful.

  Do not spread on so thick... I'm not an expert, and certainly not a God.

  I read the file, such as a film and a stage (this is the only scene... you should avoid using that word if there is more than one).  As far as turning this into a gif goes, I was able do same by selecting the output gif option in the publication settings and adjusting it as an animated gif file.

• JJUJ of printing works is not for Iphone 5 s

  I have 5 16GB iPhone after upgrading to IOS 10 to present JJUJ of printing works do not, now I have IOS 10.0.2 still not workng I need ide solution.

  Hello

  Go to settings touch id remove fingerprint and then add impressions back again.

  See you soon

  Brian