Animations during the generation with Captivate3

Similar Questions

• PXIe6556 - how to change the voltage of output during the generation?

  I would like to know if it is possible to change the voltage output (data lines) during the generation?

  1. start the generation - Vout = 1V

  2. change of output voltage without stopping the generation of Vout = 1.2V

  3. change of voltage output of...

  TKS

  Try searching for "Advanced: incarceration strategy property attribute ' and ' voltage levels: data voltage range property" in aid of generator/analyzer of signals for the digital waveform installed with your driver. This should allow you to change the levels of tension on the fly. To use this attribute, you must have the latest driver HSDIO (2.0).

  Is that what you are looking for? It is an advanced attribute, and most of the use cases should not dictate it you have been warned. I hope this helps!

• An unexpected error occurred during the generation of the Volume License Installer

  I'm building a Volume of NI Developer Suite 2016 DS1 License Installer.  I created the master suite and the installer from the DVD device drivers successfully.

  However, when I try to create tools Xilinx DVD separated issued with the Game Developer on I get the error "an unexpected error occurred during the generation of the Volume License Installer '.

  There is no other information.

  Nobody knows what is this 'unexpected error' and how to work around.

  Just worked it out.  The DVD contains 2 sets of tools; 14.7 & 2014.4.  You must come down with each of them separately, you can't just select the top-level of the DVD folder as you do with all the other discs in the package.  Would be useful if the error to a little more explicit.

• taskdef class not found during the generation of code from wsdl using Ant

  I'm getting a class not found error during the generation of the java code from the wsdl file.
  
  *******************
  CU dmwls (338) $ ant generate wsdl
  BuildFile: build.xml
  
  ++ BUILD FAILED ++
  ++ file:/ffdt01/resmgt/kul/build.xml:14: taskdef class weblogic.wsee.tools.anttasks.WsdlcTask can not be found ++
  
  Total time: 1 second
  CU dmwls (339) $ cat - n build.xml
  < default project 'all' = > 1
  2 < name = "bea.home property" value="/opt/bea/wls/8.1sp4" / > "
  "3 < name ="jdk.home property"value =" ${bea.home} / jdk142_05 "/ >
  "4 < name ="weblogic.home property"value =" ${bea.home} / weblogic81 "/ >
  5
  6 < path id = "weblogic.classpath" >
  "7 < fileset dir="${weblogic.home}/server/lib ">
  8 < include name = "*.jar" / >
  9 < / fileset >
  10 < / path >
  11
  12 < taskdef name = "wsdlc.
  13 classname = "weblogic.wsee.tools.anttasks.WsdlcTask"
  14 classpathref = "weblogic.classpath" / > "
  15
  16 < name target = "generate-to-wsdl" >
  17 < wsdlc
  18 srcWsdl="/ffdt01/resmgt/kul/ksr.wsdl.
  19 destJwsDir = ' / ffdt01/resmgt/kul.
  20 destImplDir = ' / ffdt01/resmgt/kul.
  21 classpathref = "${weblogic.classpath}" "
  22 classpath = "${weblogic.classpath}" "
  23 packageName = "examples.webservices.wsdlc" / > "
  24 < / target >
  25 < / project >
  *******************
  
  I checked this class in the use of weblogic.jar file unzip command but there is no class "WsdlcTask".
  
  Unzip weblogic.jar-l | grep WsdlcTask - does not result
  
  I am looking WsdlcTask class in all the jars under BEA_HOME directory using below command but not found in class WsdlcTask.
  
  CD $BEA_HOME
  To find. -*.jar name-exec unzip {}-l------. grep WsdlcTask - also returned no results
  
  
  Some required classes does not appear in my weblogic.jar/jar file or there is something wrong with my build.xml file?
  
  Help, please.
  
  Kuldeep

  Hi Kuldeep,

  WSDLC you use in WLS8.1 ehich is not correct... "weblogic.wsee.tools.anttasks.WsdlcTask" the above taskDef is present WLS9.x leave.

  Please use the next task for WLS8.1 (http://download-llnw.oracle.com/docs/cd/E11035_01/wls100/webserv_ref/anttasks.html#wp1075710)

  <>
  WSDL = "WSDLs/MyService.wsdl"
  destDir = "myService/implementation.
  packageName="example.ws2j.service"/ >

  Thank you
  Jay Sensharma
  http://jaysensharma.WordPress.com/webservices/ (WebLogic wonders are here)

  Published by: Jay SenSharma on February 16, 2010 13:30

• Loading screen is not animated, during the operation, but after

  Hi all!

  Here's my problem: I am display a gif animated using the class presented here.

  It is used in a specific class loader that perform an action, while the gif is displayed (the gif is a spinner). Only once the operation is completed, the LoadingScreen came out of the screen.

  Here's my class loader:

  public class LoadingScreen extends MainScreen {
  
      /**
       * The action to be processed during the loading.
       */
      Runnable action = null;
  
      private AnimatedGIFField _image;
  
      /**
       * Default constructor.
       *
       * @param action the action to manage.
       */
      public LoadingScreen(Runnable action)
      {
          super(FIELD_VCENTER);
          this.setTitle(CommonTools.initTitleBar());
          this.action = action;
  
          displayAnimation();
  
          if(this.action != null)
          {
              UiApplication.getUiApplication().invokeLater(this.action);
          }
      }
  
      /**
       * Display the animation during the loading process.
       */
      private void displayAnimation()
      {
          EncodedImage encImg =
              GIFEncodedImage.getEncodedImageResource("loading.gif");
          GIFEncodedImage img = (GIFEncodedImage) encImg;
  
          _image = new AnimatedGIFField(img);
  
          getMainManager().setBackground(BackgroundFactory.createSolidBackground(Color.BLACK));
  
          LabelField label = new LabelField("Connect..."){
              public void paint(Graphics g)
              {
                  g.setColor(Color.WHITE);
                  super.paint(g);
                  }
          };
  
          HorizontalFieldManager containerSpin = new HorizontalFieldManager(FIELD_HCENTER);
          HorizontalFieldManager containerLabel = new HorizontalFieldManager(FIELD_HCENTER);
          containerSpin.add(_image);
          containerLabel.add(label);
  
          containerSpin.setPadding(Display.getHeight()>>2, 0, 0, 0);
  
          this.add(containerSpin);
          this.add(containerLabel);
  
          KasualApplication.isLoading = true;
      }
  }
  

  The problem is that the gif is not animated, while the action runs. But if I have a popup appears at the end of the action to let the loading screen, I see that the gif is animated. As well as the animation starts when the action is complete.

  I think something is wrong in the clock of my son, but I don't see that.

  Could you please help me?

  Thanks in advance.

  It's ok, the solution is described here.

• Conversion of physical Windows 7 machine fails during the reconfiguration with converter.fault.FileCreationFault

  Hello

  first of all, thank you for providing tools such as vCenter Converter for free.

  I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.

  The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:

  Unexpected exception: converter.fault.FileCreationFault

  -ERROR - convert: converter.fault.FileCreationFault

  {(converter.fault.FileCreationFault)

  dynamicType = < unset >

  faultCause = (vmodl. NULL in MethodFault),

  file ="
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»

  MSG = ""

  }

  There is no other message log of the recent in the converter - server.log. The converter - worker.log says:

  from reconfiguring the system...

  using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig

  ReconfigurationTransaction: cached reviews system volume

  LocalPathToGuestSystemFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\

  LocalUndoFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$

  Cannot create undo file

  Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...

  TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: Task 3

  InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >

  Creation of vmx file Analyzer

  BaseParserImpl::Parse Config info is not cached

  F:\VM\wartberg\wartberg.vmx analysis

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  Registry hive
  . \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
  Boot\BCD is responsible under the name mntApi397493888030118019

  Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001

  MntApi397493888030118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi398445489630118019

  2 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019

  Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi404763500730118019 hive unloaded

  MntApi398445489630118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019

  MntApi406994304730118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi419224726130118019

  2 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019

  Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi425417937030118019 hive unloaded

  MntApi419224726130118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019

  MntApi427773541230118019 hive unloaded

  Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))

  VMOUNT library: 1450 error communication error with the pilot while

  Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.

  Error 16258 when you open the software hive

  Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))

  MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1

  OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path

  BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx

  WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.

  bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.

  http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".

  http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.

  WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: task-1

  bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.

  As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).

  Any help is appreciated!

  Thank you

  nepper

  OK - I'll upload versions changed in maybe 15 minutes

  muss weg kurz

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Animation during the loading of the page

  I just created an animation using Fireworks which, according to the tutorial can be used as entertainment during the loading of the page. What format this file must be in and where do I download it on the server... (someone has a tutorial)... one I used went, step by step, how to do it, but did not operate on the site... Thank you

  "whatisgood" wrote in message
  News:go3jlv$29$1@forums. Macromedia.com...
  > I have just created an animation using Fireworks according to the tutorial
  > can
  > serve animation while the page is loading. What format for this
  > file
  > have need to be and where do I download it on the server... (anyone have one)
  (> tutorial)... one I used went, step by step, how to do it, but does not
  > talk
  > make it all work on the site... Thank you
  >

  Im not that warned with animation in FW, but I'm assuming it would be a
  animated gif format.

  When you turn the image, the actual file or the path is not so much the
  important thing, making sure that you have correctly linked to the image
  destination on the page.
  When you upload to the server, make sure that you keep the file
  structure of your local files. If you use dreamweaver to ftp and you
  have set properly your site in dreamweaver, and then download the image
  your local site files should maintain this structure.

  Hope this is useful

  Concerning
  Fiona

• HSDIO - deterministic written submission during the generation

  Hello

  I use a card HSDIO (PXI-6542) to control a device (DUT) with a predefined fixed length, waveform continuously running.

  That maybe had TO actually benefit from the dynamic changes in digital signals according to the measurements on the INSTRUMENT itself.

  At the moment I just pass off the coast of the ASE and map HSDIO, write the new waveform on the map, turn to ESA and the generation of digital signals.

  Of course, this is not optimal and I would like to change the way signal 'live', while the DUT is running.

  Just crush a waveform, whereas it is generated should not be working smoothly due to a condition of race as explained here: http://digital.ni.com/public.nsf/allkb/14CE41C9CB9F10A88625766A005CEE47

  I think that I've found a workaround, but need a confirmation about this.

  Instead of just a waveform, I could use 2 and select which is generated using a trigger.

  The corresponding script might look like this:

  script myScript
  
    Repeat forever
  
            If scriptTrigger0
  
              generate a waveform1
  
            on the other
  
              generate a waveform2
  
            end if
  
    end repeat
  
  

  For example, the idea is to generate a waveform1.

  Then according to that CSA should I calculates waveform2 and transfer it to the HSDIO map.

  I think here is overwrite waveform2 with the data of the same size will not create any small problem because it is not currently used to generate signals.

  After this using the trigger, I could start using waveform2. If I need additional adjustment of wave shape I could do this by editing waveform1, so it is not used for the generation and thus now alternating serves really what waveform.

  Am I correct in that a waveform in memory but are not currently used can be replaced without causing glitch on an another waveform that is currently?

  Kind regards

  Baptist

  Hello, Baptist,.

  Yes, you are right. It is a method to dynamically change the waveforms on the fly that was already used in the past. If you waveform1 to generate and download waveform2 then it is idle, it will not affect the generation of waveform1. Then, triggering via scripttrigger to waveform2, then you can download the next waveform, you want to use for waveform1 without affecting the production of waveform2.

• My computer fills up during the night with 50 GB of additional storage used. Why would he do that?

  I have a 500 GB hard drive. He "filled." 0 bytes left. I bought an extra external hard drive and have installed 250 GB on the new hard drive. I did NOT use the computer during the night. In the morning, the original hard drive was new. Why would he do that?

  I suggest you use a utility like the size of the folder to try to identify where the records are piling up.

  (for example I recently used it to track down a mystery space where it turns out the user contained a diagnostic trace activated accidentally in a safety program that created constant log files in a deeply nested subfolder.)

  Download it here.  With any freeware watch carefully for dishes bug prompts during installation.

  http://www.Mindgems.com/products/folder-size/folder-size-download.htm

  Also, I've seen some hard to find root kits that Norton probably would not find cause this problem. I suggest that you run these additional free tools-

  TDSS Killer
  http://support.Kaspersky.com/5353?El=88446

  By downloading and installing these be sure to get the free version. Say no
  for all offers free trial or the auto update during installation to keep the functional free version.

  Malwarebytes
  http://www.Malwarebytes.org/products/malwarebytes_free/

  SUPERAntiSpyware
  http://www.SUPERAntiSpyware.com/

• No speaker sound by activating during the call with 5.1.1 23.4.A.0.546 R6C

  Hello

  I just received my repair z3c (camera problem). When I activate the speaker during the call since there is no sound at all. The diagnostic test on the z3c works correctly.  I guess this sw related so but is this problem known by others?

  Problem solved after the firmware upgrade.

• Flashing lights during the walk with HDX9050EO

  The problem with my laptop HDX9050EO is that when switch on/off the light blue just little flashes and noting happens next. After I try to sequence several times (5-50) power begins as usual.

  any suggestions to fix this?

  Consider pizzaman!

  It's your code beep/led info:

  http://support.HP.com/us-en/document/c01732674

  Yet, I think that you can test your memory. If you have two chips, try one chip at a time and see if the problem goes away.  Try also to each slot.

• Locking during the generation and the online option to avoid problems

  Hi Experts,
  
  In our suite of applications, schemas are shared among several applications, and even when there is a deployment of an application, the other application remains upward. In this process, we are facing problems of locking. For example, when creating indexes, I get the error "resource busy and acquired with no expectations. This post is specific to this point on error when creating index (change the design of the app etc is out of reach for me currently).
  
  I was checking the "online" option of create index and I was wondering if that helps. It looks promising for me. When we have large tables (50 million more and creating indexes on them takes about 5 minutes and at the same time we have another app doing short transactions - who commit in 5 seconds, then creating index 'with the option' can help - is what I was asking.)
  
  Here is an example of what I've tried:

  -- first create a table with a few million rows:
  
  SET SERVEROUTPUT ON
  
  DECLARE
    v_sql VARCHAR2 (200);
  BEGIN
    v_sql := 'create table test as select * from dba_objects';
  
    EXECUTE IMMEDIATE v_sql;
  
    FOR i IN 1 .. 5
    LOOP
    v_sql := 'insert into test select * from test';
  
    EXECUTE IMMEDIATE v_sql;
  
    COMMIT;
    END LOOP;
  END;
  /
  
  --Now in session 1:
  ---------
  
  
  create index ti1 on test(OWNER,OBJECT_NAME,SUBOBJECT_NAME,OBJECT_ID,DATA_OBJECT_ID,OBJECT_TYPE,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS,TEMPORARY,GENERATED,SECONDARY,NAMESPACE)
  online;
  
  session 2:
  ------------
  DELETE FROM TEST WHERE ROWNUM<1000;
  
  commit;
  
  DELETE FROM TEST WHERE ROWNUM<40200;
  rollback;
  
  --etc.
  

  
  I find that deletions, etc. in the second session is done (they follow by commit and they take a few seconds) with this option 'create an index online '. The option 'create index' is also no error with the error ORA-«resource busy...» ». So what a better way to create indexes to avoid locking issues? Note that is is very good for us to have the creation of index take more time for what's important is that they are not lacking in critical production deployments.
  
  Are there other possible implications (-except that it takes more time to create the index with the option 'online'), that one should be aware of? Any known issues or is there any other glitches with the creation of online index?
  
  I will be grateful for any views on that.
  
  

  What is your version of DB full?

  In our suite of applications, schemas are shared among several applications, and even when there is a deployment of an application, the other application remains upward. In this process, we are facing problems of locking. For example, when creating indexes, I get the error "resource busy and acquired with no expectations.

  OK-, this exception is not surprising. To create or rebuild an index, Oracle has a lock on the base table. He can't do that if other users perform DML on the table - it must wait.

  And before 11 g ANY other session that then tries to perform DML on the base table that oracle wait will also block.

  I was checking the "online" option of create index and I was wondering if that helps.

  Well, if you do not use the clause of 'ONLINE' you must do that maintenance CONNECTION or you now cause other sessions cling while creating/reconstruction is made;

  It looks promising for me. When we have large tables (50 million more and creating indexes on them takes about 5 minutes and at the same time we have another app doing short transactions - who commit in 5 seconds, then creating index 'with the option' can help - is what I was asking.)

  Yes - it should help. But he cannot eliminate the problem entirely.

  See this article by the Index indicated Richard expert Foote (there are many other related articles index also):

  https://richardfoote.WordPress.com/2008/02/11/index-create-and-rebuild-locking-improvements-in-11g-ch-ch-ch-changes/

• First bug Pro: cannot apply default transition during the sequence with keyboard navigation

  Hey everybody, it seems that I stumbled upon a very strange bug/problem in first Pro CC 2015.0.2 on OS X 10.10.5.

  Please check the 2 screenshots below and then please read my description of this problem down below the screenshots.

  

  

  In TWO screenshots, my head is in the EXACT SAME PLACE on the timeline of the sequence.

  But the 1st screenshot, I am UNABLE TO SELECT "apply video Transition ' or 'Apply Audio Transition', I am able to use their keyboard shortcuts. This is the bug/problem. I expected to be able to select the items and I expected to be able to use their keyboard shortcuts. But as you can see, they are completely gray.

  In the 2nd screenshot, everything works normally... everything as it should. The "apply video Transition ' AND 'Apply Audio Transition' are available to me, just like usual.

  So, what is the difference between the 2 screenshots?

  Screenshot #1, I started to play the sequence by pressing the space bar, I went through the edit point, and then I stopped the sequence by pressing the space bar again. Then, I pressed up arrow on my keyboard to replace the playhead in the edit point that I was coming. But when I use the keyboard to navigate in the sequence of this way, 2 menu options "apply video Transition ' and 'Apply Audio Transition' are not available! For some reason when you use your keyboard to navigate in your sequence in this way, it doesn't allow you to apply default video or audio default transitions (from the menu or their keyboard shortcuts). First Pro NEED that MANUALLY drag you these transitions of the Panel "Effects".

  Capture screen #2, all I did to fix this was CLICK ONCE with my my mouse ANYWHERE IN THE SEQUENCE itself. By clicking in the sequence, suddenly these 2 menu options becomes available to me. All we needed was a little tiny mouse click to fix this bug/problem. But of course, it is the problem... I'm sailing in Adobe Premiere Pro with my keyboard instead of my mouse, so it defeats the purpose of navigate the application with the keyboard if I constantly have to click in order for every single edit point.

  PLEASE NOTE that my sequence was ALWAYS 'the active Committee', you can tell by the blue outline around the sequence itself. If this problem is not caused by the sequence is not not the 'active' Panel before attempting to apply these default transitions.

  Any thoughts on this topic?

  Thank you

  Scott

  Hi Scott,.

  Hey everybody, it seems that I stumbled upon a very strange bug/problem in first Pro CC 2015.0.2 on OS X 10.10.5.

  Please check the 2 screenshots below and then please read my description of this problem down below the screenshots.

  Any thoughts on this topic?

  There are some overall unexpected behavior going on here, but I also see some of the things in OS X 10.10.5. Please file bugs here. He does not behave reliably if editing is enabled, however.

  One thing you might try puts in place a shortcut to "select the closest point edition like Roll. This should you configured to add a default transition with the keyboard.

  However, I found that on Mac OS X, I have to press the command twice to

  1. Place the head of the edition and
  2. to select the edition

  This also seems to be a bug. It should move both the playback head and select the edit at the same time. At least it's what I expected. I'm going to give this one as well.

  Sorry for all the trouble.

  Kevin

• Animation of the arrows with "tails" more

  I am trying to simulate an arrow (more precisely, the tail of the arrow more more... not the head of the arrow itself) more and more.

  The arrow head would go a certain way and would effectively a trail behind it that's its tail.

  In the image as an attachment, there would be a white screen and then the arrow would be out of the bottom and follow an imaginary path, leaving the tail behind her.

  Having a hard time finding how to pull this off.

  It is not too difficult, but he needs a few layers.

  Start with a model of square pixels, which is higher that you actually need.  You will nest in your main computer later.  Do a solid and make the shape of 'body' of the arrow with the pen tool.  Forget arrowhead for a moment. Apply the edge effect to animate the curved line.

  Make arrowhead requires two solid: a solid square Palm to act as matte for the end of the race - stroke has a circular brush, and you will have to square OFF - and a solid with a mask of triangle, which is at arrowhead.  Copy the mask provide you in the body of the arrow in the position property of each solid.  Use the command from the East the long path for each, adjust anchor points and rotation if necessary, and then twist to adjust the timing of keyframes.

  It's an arrow made.  Repeat if necessary.

• Digest the lag when running during the generation of the ant script

  I'm tying all libraries referenced by my Flex as RSL project. When I do this through Flex Builder seems to work.  When I try to do it via an Ant build script to the mxmlc task the build succeeds (everything compiles) but when running, I get error #1001 Flex: mismatch with RSL Digest for datavisualization.swc.  Not sure why I make this especially since I specify datavisualization.swf in the rsl url not a swz file. Both methods give the same set of swf, SWC, and swz files in the deployment folder.  I can't understand what is different between the two build processes after comparing the .actionScriptProperties with the ant script.  Can anyone help to shed light on this or help me understand how push wrong with that? Thank you.

  My task as mxmlx:

  < mxmlc
  file = "${Flex.main.file}" "
  output = "${Flex.output.swf}" "
  ActionScript-file-encoding = 'UTF-8 '.
  Keep-generated-actionscript = "false".
  link-TIME-shared-library static = "false".
  local = "en_US."
  MaxMemory = "256 m" >
  
  < path-element source-path = "${PROJECT_FRAMEWORKS}" / >
  
  < dir external-library-path = "${PROJECT_FRAMEWORKS} / libs/player" includes = "playerglobal.swc" / >

  "< path-element="${PROJECT_FRAMEWORKS}/libs/framework.swc DURATION-shared-library-path ">

  < url rsl - url = ' framework_$ {FLEX_BUILD} .swf ".
  < url rsl - url = ' framework_$ {FLEX_BUILD} .swz "/ >
  < / DURATION-shared-library-path >
  
  "< path-element="${PROJECT_FRAMEWORKS}/libs/rpc.swc DURATION-shared-library-path ">
  < url rsl - url = "rpc_$ {FLEX_BUILD} .swf" / >
  < url rsl - url = "rpc_$ {FLEX_BUILD} .swz" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/Automation.swc" >
  < url rsl - url = "automation.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/automation_agent.swc" >
  < url rsl - url = "automation_agent.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/automation_dmv.swc" >
  < url rsl - url = "automation_dmv.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/automation_flashflexkit.swc" >
  < url rsl - url = "automation_flashflexkit.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/DataVisualization.swc" >
  < url rsl - url = "datavisualization.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/Flex.swc" >
  < url rsl - url = "flex.swf" / >
  < / DURATION-shared-library-path >

  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/qtp.swc" >
  < url rsl - url = "qtp.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/Utilities.swc" >
  < url rsl - url = "utilities.swf" / >
  < / DURATION-shared-library-path >
  
  < compile .library-path dir = "${PROJECT_FRAMEWORKS}" / locale ' append = "true" > "
  < name = "{local}" / >
  < / compile .library-path >
  
  ...
  
  < default width = "500" height = "600" / >
  < / mxmlc >

  I didn't write the patch, but I just took a quick glance. I think that the "url" element has been renamed to "rsl - url" and new elements have been added as "failover-url". You can try to match this new syntax, but I don't think that this patch will be agreed due to rename it.

  -Darrell