Find and replace works only not for files in folders

Similar Questions

• mailto works only not for Android smart phones

  Hi all

  I'm developing a couple of websites with Muse and the mailto link does not work on Android phones. When I click on the email link, I get the error:

  The webpage at mailto: [email protected] cannot be loaded because:

  NET::ERR_UNKNOWN_URL_SCHEME

  Is this common? Works for iOS, Mac and Windows, so a little surprised!

  Cheers, Paul

  Hello

  I tried to recreate the same thing at my end of presentation both phone and desktop computer and checked on my Android phone, and it worked fine with no errors.

  Can you please share the URL in question with us so that we can look at it codes?

  Concerning

  Vivek

• Place command works only not for medium business documents

  I use InDesign CS4 on 64-bit of Windows 7 and Word 2010.

  I can bring 1-2 small docs page in InDesign with the command set without a problem.

  Now when I load a slightly longer doc, 7 to 30 pages, the text appears next to the cursor, but when I hold SHIFT and left click on the docment page where I want to place the text, I just get a blue horizontal line (? on the edge of a text box), but no text appears.

  Is not serious if I make the order place with an area of text selected or all simply the page of the document.

  Any idea what might happen or how to fix it?

  Thank you

  Robert,

  Of course, I wasn't quite clear. I need the file .indd, not the word files (well that have are not a problem). There is something about files .indd which is the culprit here, I'm pretty sure.

  Can I place the file .doc without any problems in a new default document .indd using CS4 here. The .docx is another story - never, it loads the pistol of the palce, but I don't know why, but save as .doc allows to place correctly, too. The .docx up correctly in CS5.5, so I think there must be a problem of import here filter in CS4.

  In all cases, please send only the .indd files so I can watch text blocks and styles and formatting that you have applied.

  Peter

• Dependent drop-down list of ADF works only not for me

  I used the following example
  
  [http://ranajitsahoo.blogspot.com/2008/05/how-to-implement-dependent-drop-down.html]
  
  I can't list the employee to complete.
  
  I tested my emplist of the tester module app object and the values have been retrieved after that I get my setting for deptid
  
  This is what I checked:
  
  Properties departmentList - autosubmit = true, id is empdeptid
  
  Properties EMPLIST - triggers partial = empdeptid
  
  Def Page Properties:
  Links
  Run with the settings has been added
  iterator is Emplistiterator bind value = bindings. EmployeesView1DepartmentId.inputValue
  
  Executables:
  Call action has been created binded to executewithparms and placed before the emplist
  updating has been configured to render a model
  
  
  Can we see something that I missed?

  Hello

  using invokeAction is not a strong implementation as it fails for applications PPT. It only loads when the page is refreshed and there, it is not very reliable. The best option is to write code in the valueChangeListener for the departmentId field and run the query programmatically.

  Frank

• Animations work only not for sweeping three-fingered until mission control

  Hello, I'm 10.11.5 OSX and every time that I drag upward or downward with three fingers, there is no control of mission animation doesn't seem fair, I have several users on my macbook pro and this problem only affects users of ideas how I could get back animations? I've tried rebooting and logging in and out of the user but nothing I tried fix it

  I have this same problem and it has just appeared. Weird.

• Find and replace results does not go to the line

  In the results pane, after that I search in a large file, it won't take me to any line when I double click on a row in the results pane.

  This only seems to happen on large files.

  -------------------------------

  What happened to Dreamweaver? It used to be a reliable platform, but since the supply of creative Cloud of this software, the reliability of it has fallen dramatically.

  I'm getting tired of these hiccups that never used to be a problem. You already ruined Homesite to Dreamweaver. Continue this and I'll get a replacement to Dreamweaver. I have work to do, and I need something that works as perfectly as possible.

  I do not pay you for your pig to India!

  CY

  I think I found the answer to this.

  This seems to be the result of the associated files. This can be set under view > Options related files > filter.

  However, I have found that if I go to preference > general and together Discover Dynamically-Related files to manually, then it has not slow research or impede the conclusion of each line when you click on in the results pane.

  Hope this helps others.

• Adobe AIR for Android as3 codes work only not for this one project

  I am using the accelerometer in my flash game, which works for all the other projects I'm trying, but for some reason any on a project if I try to use it I get, using the same code that I've used before, such as this one.

  1046: type was not found or is not a constant of compilation: accelerometer.

  1180: call to a method may be undefined, accelerometer.

  It is a quite old file, not if old, then, are there files I have to add to make it work or I need to change the settings? It's very frustrating, I don't know what the problem might be. Can someone help me?

  The error message indicates it does not find the class.  Make sure you import it:

  import flash.sensors.Accelerometer;

• Shift-click eyedropper trick works only not for me

  I would like to have knowledge of Deke McClelland of Illustrator, but I'm only learning...

  He used the Eyedropper to copy just the #1 path #2 path gradient fill (not the shot!)

  Cool!   So, I tried...

  1 created 2 paths - path #1 = blank/outline, path #2 = empty/striped

  2 apply a gradient to #1 path (so now gradient-filled/contour).

  3. made sure 'fill' is selected in the color Panel.

  4 selected path #2 (still empty/rubbed).

  5 activate the eyedropper.

  6 shift - click on the eyedropper over sketch of the #1 path.

  For him, the gradient of the path #1 path immediately fill filled #2.

  For me, the #1 trail gradient fill is now displayed in the color Panel, but path #2 remained vacant.

  I know that I can copy fill + race to the path #1 path #2 with the click of rays of the pipette, but what escapes me in the Tower of his shift-click?

  (I've checked everything in the van of the pipette and apply options)

  Try these settings of the pipette. I need to have two peaks upwards and applies to offshore. Did not work with great efficiency to race on.

  

  RESULT:

  

• Captivate 5 Advanced answer to poll option works only not for me

  I use Captivate 5 and have a series of 6 questions in the survey as below:

  

  Which, according to me, I put in place, if they choose or a or b, he has to jump to slide 6 (i.e. the next slide) does.

  If they choose c) vegetarian - it says on the answer advanced options jump to slide 8 vegetarian (which is another drag several answer questions "poll"), but it isn't, yet, he climbs to the next slide.

  All my questions are asked, I try to learn more about my clients and wanted to take them through other questions based on what response they provide.

  In the Quiz properties box, where it says Action, I put it in place for this slide as 'Continue', because nothing else seems to help.

  Any suggestions as to why it does not work as I want, I spent 3 days trying to find an answer and trying different ways to do this, so your help is very appreciated.

  Lilybiri done a lot of this and messages often enough: http://lilybiri.posterous.com/tag/quiz

• hash function works only not for me

  I tried to figure this out all day, and I can't understand what I'm doing wrong.
  
  I'm trying to get this password hash example works if I can use it on an application I am building. For some reason, no matter what I did, I had either an error, or no error, but the encryption did not.
  
  I realized that I had not named the form, so I did it, which resulted in one) no error b) no message 'username or password is not valid' - and c) no message "password is valid".
  Passwords are encoded in hexadecimal.
  
  Can you see what I could do wrong?
  

  Well - it turns out that 'someone' is me :) I had already visited this page:

  http://www.petefreitag.com/item/270.cfm

  previously, but it didn't occur to me that I might need to regenerate the hash values (and Yes, it * is * need to be stored in the table - hash values, otherwise why encrypt? it's all here for a common sense to watch). So I tried a couple, and there is nothing wrong with my code - it worked! I just made a small doc cfm like this:

  #Hash("myPassword", "SHA-512") #.

  (although I've used another algorithm; (D) I replaced with my password 'mypassword', and it generates the correct hash.

  * Phew *. :)

• Xbox 360 controller triggers work only not for pc

  I recently brought a xbox 360 controller to my pc all the buttons seem to work fine execpt triggers, they work with games like halo 1 havnt tested too many other games tho
  He came with the instillatoin disk but still do not work the triggers that bothers me really because I could have made a controller at half price with style ps2 but I perfer the 360 setup
  so, it would be great if someone can help me solve this problem and sorry for the bad catigory

  Stick with your new thread in Vista/Gaming forum: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/8d7a3ddf-ebee-4768-b69e-ccc37787be45

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• < cfqueryparam with null attribute works only not for me >

  Using SQL Server 2005 and CF801.  I have a field in my table defined as (int, null).  In my .cfc CF function.

  < name cffunction = "createReference" access = "remote" returntype = index 'string' = 'add a reference unit.  The success of ReferenceID back on return error message. ">

  < cfargument = "intsteam_cap_mwe" type name 'digital' = required = "no" default = "0" >

  < name cfquery = "insertReferenceData" datasource = "#application. DSN #">"

  INSERT INTO units

  (

  SteamCapacity_MWe)

  Values

  (

  < cfqueryparam value = "" #arguments.intsteam_cap_mwe # "cfsqltype ="cf_sql_integer"= null" #YesNoFormat (NO len (trim (arguments.intsteam_cap_mwe))) #">"

  )

  < / cfquery >

  < / cffunction >

  However, it gives an error "INTSTEAM_CAP_MWE the argument passed to the function createReference isn't digital type."

  In my old code, I used < cfif to test if the value is not numeric, then assigning a value of 0.  This method works.  However, I have so many fields and many < cfif s so I would use the < cfqueryparam > NULL attribute. In the code above, it's just one of the many areas inside my cffunction.

  Help, please!

  Thank you.

  me1019 wrote:

  In my form, I'm not fill this field as a test for the . I thought that this will take care of this situation.

  Nope. Even if you leave the text box empty, still defined sound. If you pass an empty string as Steve.  An empty string is not a number. If your function is complaining because you have already told him to expect a number:

  type = "numeric" required = "no" default = "0" >

  You either have to force the value to be digital, such as use val() or change the type argument.

• transparency works only not for me

  Hello:
  I have a .gif with transparent index image, presenting itself as I expect (i.e. with correct transparency) when embedded in a web page. However, transparency does NOT appear in my Flash swf file. In ActionScript, I use the loader to load the image, and the Bitmapdata coming out has the transparent property to true (I can see it in the debugger). However, does not have transparency. Thanks for the tips!
  
  

  I realized what I was doing wrong. I was not calling
  new BitmapData
  with the transparency setting and fillColor parameters. Sorry to take up on the plateau with something that should have been obvious.

• Kuler home page works only not for me

  I'm trying to access the Kuler Web site and I see is a black background with the message "Kuler requires the latest version of the Adobe Flash Player." appears above the button 'Get Adobe Flash Player '. I clicked on the button, downloaded and installed the latest Flash Player (I left Safari before installing), but I still see exactly the same thing when I try to access the Kuler site. Any suggestions?
  
  I've logged into my account Adobe but that did not help. I have also restarted and emptying the Cache of Safari but still the same. I use Safari and Mac OS X 10.4.9
  
  Thank you
  NAS
  

  Or try a manual uninstall and reinstall, as Mac OS X uninstaller does not work properly (bug was noted on that).
  Check what version you actually run here. For Mac/Win, it should be 9,0,47,0.
  Saami

• Windows updates not working only not for me getting error ox8024400A

  I am running windows xp (so-called version 5.1 with service pack 2).  I had to enter "winver" check.  In addition, whenever I try to update microsoft windows, I get an error message (ox8024400A).  What's wrong?  I recently reinstalled windows XP.  My computer is in a very basic State.  No virus protection other than the additional analysis when I tried earlier to install Microsoft Security Essentials.

  You must be at the level of SP3 to use Windows updates.

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  (Unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  You can download the full file for SP3 manually (and keep them for later use).