Annoying Pop - Up When you send the document to the printer

Similar Questions

• What to do when you send a document for a signature and the person following the instructions to sign, but the document is not save or send the document to the person who asked for signature

  Problems with eSign service... not recording not not signing so it can refer to the person who asked.

  Hi clarisse.

  If you send the document by using services of E-Sign, once the document is signed, the document is automatically sent to the sender as a signatory.

  Let me know if you have any other questions.

  Kind regards

  -Usman

• Windows help keeps popping up when you press the happy.

  Hi, I am currently using an HP XT's spectrum that runs on Windows 8. Two days previously, when I press SHIFT C, the capital C is not at all.  Therefore, I press Caps Lock shift but this triggers a Windows Help is displayed.  This can be very irritating, especially when I'm typing a document. Anyone would be able to tell me how to activate the 'Shift C' keys, as well as to turn off the help pop-up windows when you press the CAPS LOCK key.?  Thank you very much for your help!

  Hello Lai,

  Thanks for posting your query in Microsoft Community Forum.

  If it works well before? If YES, you did important equipment or modifications to the software on the computer before this problem?

  The issue could rest with the material if it is a keyboard mapping problem. Then, I recommend you to connect an external keyboard with the ultrabook and check. If the external keyboard works fine, then you may need to contact the manufacturer of your system (hp) for the same problem.

  If you get the same problem with the external keyboard, the issue may rest with the keyboard or corrupt drivers.

  In this case, I suggest you to update the drivers for the chipset of your ultrabook. You can view the following link to do so:

  Spectrum of HP XT Pro Ultrabook

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How to disable pop ups when you hover the mouse.

  Separated from this thread.

  There is nothing for windows 8... pop ups everywhere.

  Hello

  Please contact Microsoft Community.

  I would ask details you below to help you better.

  • Do you get pop ups when you're online or when you use other applications?

  If the problem is through the use of the internet, then I ask to perform the steps in the Microsoft Help article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-security-privacy-settings#IE=ie-11

  Hope this information helps you. If the problem persists, then answer to help us with the results for you the best.

• Yellow box pop up when you move the missing links in CC?

  The behavior when you move the links in the links in CS6 Panel was a yellow jump to the top of the box with the full path of the link.

  I find that does not match the behavior in CC and really miss me that.

  Am I missing a setting somewhere to allow this in CC?

  Do you have tips enabled in your preferences?

• When you send the Web page link, the link is not active

  When I want to send the link to a Web page I visit, I choose my yahoo email account and the webpage link is inserted in the email box, but it is not an active link and cannot be clicked for this person to go. They could, however, copy and paste the address into a browser bar, which everyone would know how to do. If I choose my gmail account, the link is active. What is a firefox problem or yahoo? There are moments where the yahoo link would be active, but it seems that it is never active.

  Some publishers have magical powers to linkify automatically a URL. Yahoo does not that for Firefox, although I heard that it does for users of Internet Explorer.

  Instead, you must use the link button. I have attached some screenshots illustrating.

• How to customize the automatic email solves this pop-up when you type the first characters

  When I type the first characters of an e-mail address, I would prefer that the pop up most frequently used e-mail addresses. This does not happen in Thunderbird. How can I adjust in a framework?

  "Tools" > "Account settings" > "Composition & addressing" for the e-mail account

  or search by
  'icon menu' > 'Options' > 'Account settings' > "Composition & addressing" for the e-mail account
  Under "answer".
  Select "use my global preferences of the LDP server for this account.
  Click on 'Addressing Global Preferences' to open this link
  'Tools' > 'Options' > 'composition' > ' address tab
  When addressing messages, look for entries in the corresponding
  Select: 'address books local. "
  Click OK
  Back in "Account settings" > "Composition & addressing".. low .to where it says "address for auto complete address books.
  Click on 'change '.
  Make sure all address books are selected or make your choice
  Click OK
  Finally click OK to save the changes to account settings.

• Exception sometimes when you send the query to the oracle server

  Hello
  
  I'll send the following query to the oracle server:
  t (*) AS 'COUNT' FROM 'DEPT_MANAGER' JOIN 'EMPLOYEES' ON DEPT_MANAGER. EMP_NO = EMPLOYEES. EMP_NO AND DEPT_MANAGER. TO_DATE = 9999-01-01' LEFT JOIN 'DEPT_EMP' ON DEPT_MANAGER. EMP_NO = DEPT_EMP. EMP_NO AND DEPT_EMP. TO_DATE = 9999-01-01' LEFT JOIN 'DEPARTMENTS"ON DEPT_EMP. DEPT_NO = DEPARTMENTS. DEPT_NO GROUP OF DEPARTMENTS. DEPT_NAME, EMPLOYEES. FIRST_NAME. » '|| EMPLOYEES. LAST_NAME, DEPT_MANAGER. EMP_NO, DEPT_MANAGER. DEPT_NO, DEPARTMENTS. DEPT_NO
  
  A java application, it works and another does not.
  Here are the exception?
  
  What can cause this? What does this exception?
  
  Message:-2
  Cause: null
  StackTrace
  oracle.jdbc.driver.T4CStatement.saveDefineBuffersIfRequired(T4CStatement.java:464)
  oracle.jdbc.driver.OracleStatement.prepareAccessors(OracleStatement.java:927)
  oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1047)
  oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:830)
  oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132)
  oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1687)
  oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1653)
  
  Thank you

  To remove the suspected driver, download and use the latest ojdbc14.jar is.

• When you select the print document, a box comes up to save the document as. How can I prevent this from happening every time?

  I want just the print page, will not record to it anywhere.

  I hope it's just a setting. I can't find to fix on my own. Thank you for your help.

  Sandy

  Depending on your printer, there may be a checkbox in the print dialog box to "print to file". Make sure the box is unchecked.

• OfficeJet 6500: Fax appears not when you add the printer with El Capitan

  I've just upgraded to El Capitan.  I have a 6500 Officejet and Officejet 6700 on the network and that you can print on both but fax is not working.

  I tried to delete faxes from the Printers & Scanners window in the settings, but when I try to add more once they are not appearing in the list.  When I click on add everything I see is the following:

  

  It should be an option fax for two (well I want that the created such as 6700 6500 is not connected to a phone line).  Anything I can try to get the Fax option to appear so that I can set up the Fax network (the printer is in a different area of the building so my work around printing and then manually fax is a pain - unfortunately, one of our main suppliers insists on faxes and will not accept orders by email if I need this to work!)

  By the way I tried selecting the 6500 in the list and then change the print to fax driver driver in the area of USE, but the printer is not sending it by fax - print only a few pages of garbage.

  Any help would be great because I find it very frustrating.  Also, I have another Mac with Yosomite on which has the same problem, so I don't think it's specific to El Capitan (but mine was working when I got Yosomite, but I installed the printer/fax under an earlier version originally).

  Try to update the software by following these steps:

  First of all make sure that the printer is turned on and connected to your Mac or on the same network.

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Be sure to install any update HP or Apple, then check for the difference.

  If it persists, try manually install the package below:
  http://support.Apple.com/kb/dl907

  Search for now no difference.

  Note that it may take up to a minute for the Fax queue to appear.

  Shlomi

• MSIExec error when you reinstall the printer drivers

  Hello

  Recently I had to uninstall and reinstall the drivers for my printer since Windows went crazy and did not leave the printer accepts the Word document to print. But what installation it shows MSIExec error (image below). I tried to uninstall all the goodies of the printer (apps and help center), attempted to clean the registry manually with regedit and tried to change the data USB connector. Without success.

  

  Since I live in Czech Republic, use Czech version of Windows and install Czech, the text shows in Czech. The important thing is below.

  What is a kind of this error and that means the return code? How to fix?

  With the help of color printer LaserJet M175a MPF on Windows 7 Ultimate 32-bit edition 100...

  Need help please, quickly, I need to print an important document...

  Hey @Polda18,

  Usually the error 'an installation operation took too long to run"are related to the file system on your computer. There should be no reason you have to increase the RAM of your computer. Clean the registry is not a bad idea, but I'll offer a few steps first under your normal user account.

  Step 1: Install by using HP Smart Install:

  1. press on the power button or switch to turn off the product, if it is not already turned off.

  2 unplug the USB cable from both the product and the computer, if you already connected.

  3. press the power button or turn the product on.

  4 reconnect the USB cable to the computer and the product

  The HP Smart Install program should start automatically. Follow the on-screen instructions to install the software.

  If this also fails, proceed to the next step.

  Step 2: Disable Smart Install:

  1. On the front panel of your printer, select the button "Setup" (the key)
  2. Under the Setup menu arrow right over into the Service Menu and select OK
  3. Under Menu Service to 'Smart Install' on the right arrow and click OK
  4. Under the Smart Install please disable this feature, then select OK

  Once install Smart is disabled, continue with the next step.

  Step 3: Run a selective startup on the computer:

  1. Click on the start menu and in the box "search programs and files", type in msconfig and press enter
  2. A box of the System Configuration utility will open now. Under the 'General' window, select "Selective startup" and only to uncheck "Load Startup items".
  3. Click on the 'Services' tab at the top
  4. Select the checkbox at the bottom to "hide all Microsoft Services"
  5. Select 'Disable All' on the right
  6. Select apply then OK and restart your computer when prompted

  Step 4: Run a SFC/scannow:

  It is an analysis which are running on your computer. It should identify all the corruption of the system it will tell you. Should the request of scan that you insert your operating system disk, this indicates that you have a corruption of your computer and your operating system must be reinstalled.

  1. Go to your Start menu and type CMD
  2. CMD will fill in the option above, made a click right on this and 'run as administrator '.
  3. When the command prompt opens, type sfc/scannow and press on enter
  4. Allow analysis of fill and take note of any errors, it may impose a fine
  5. Restart your computer once the analysis is complete

  Step 5: Run the Windows updates:

  Please ensure that all of your Windows updates have been completed.

  1. Open Windows Update by clicking on the button start , clicking all programs, and then click Windows Update.

  2. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Install Windows updates

  Once these steps are completed, try to reinstall your software and drivers. Please let me know if this procedure resolves the problem. If you end up getting any other error messages please let me know. Good luck!

• Why did I get a warning from paper size when you use the printed booklet?

  I am trying to use the facilities to print booklet in InDesign CS4 (running Windows XP). My document pages are portrait A5 and my printing parameters for the booklet are A4 landscape. However, the print booklet dialog box is warning me that "the booklet does not match the current paper size. Click Print settings to specify a paper size larger or the scale of the brochure to adapt. »

  Because, by design, a folded sheet of A4 is exactly A5, no scaling should be held. If I ignore the warning and continue with printing, every page of my book is followed by a blank page. I remember ever get this problem when I created version of the year last my brochure, using InDesign CS2.

  Anyone can shed some light on this mystery?

  David

  Sorry, I guess I forgot to answer this question earlier. If the contours of the block are displayed, they take on the color of the layer on which they are found as a visual cue. You can hide the contours of the block on the view menu, or by pressing Ctrl (Cmd) + H. They will disappear also in preview (W).

  Peter

• error 0X800f0214 when you install the printer driver

  When you install a printer driver (network), an error message appears saying that the action could not be completed - error 0X800f0214. The printer is shared and my firewall is set to off. I have absolutely no idea on what to do and would like to get advice and INFO.

  Marc DS,
  It would be useful to have a bit more information, such as the make and model of the printer, what version of Vista you are running and what type of network - wired or wireless (or both), if there are other non-Vista on the network computers, etc.  You get the error message corresponds to "the specified path does not contain any applicable device INFs" which means basically the location where the OS is looking for the driver file does contain a valid driver file.  There could be several reasons for this, but without knowing the configuration of network and printer, it's hard to identify.  Make sure that the driver is one that is suitable for this printer model and your version of Vista and make sure that the path (c:\ - or other) is correct and that the location of the driver file is shared.  I hope this helps.  Please post back with more information if you still need help.

  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message when you install the printer driver

  First of all, let me tell you that I was searching and tried solutions for ten days, but can not solve the problem.

  My HP P1102w printer is three years old and is connected to my PC via a USB cable. It is not a shared printer. It worked correctly until 10 days ago. Suspecting corruption driver, I downloaded the latest version of the driver on the HP website. When you try to install it, I met with this error message:

  Windows found driver software for your device but encountered an error trying to install it.

  In the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0

  If you know the manufacturer of your device, you can visit their website and check the support.
  My PC OS is Windows 7 Ultimate 64 bit. Let me know what additional information may be required.

  Please sent me useful information.

  Thank you so much.you sent slove my problem how.

  It seems that the problem was due to corrupted driver files that were not replaced when I reloaded the drivers. I was able to solve the problem by deleting the files in the driver manually. I followed the following steps:
  step 1:
  Check out C:\Windows\System32\DriverStore\FileRepository and delete everything that associated the P1102w printer, such as the hp1100.inf_amd64_neutral_56c36f106bed03b4 folder. If I remember correctly, there are two or three similar files that I deleted.
  step 2:
  Then I tried * 1102 on the path c:/windows/system32 and removed from files that have been associated with the P1102W printer.
  step 3:
  I'm not sure that this step is need, or you need to do this step before the other steps. However, in this step, I ran uninstall. exe from the HP driver CD supplied with the printer. After about 10 minutes I forcely closed the uninstall.exe process in Windows Task Manager because the uninstall process seemed to be hung.
  step 4:
  I ran setup.exe from the HP CD supplied with the printer and the printer installed successfully.
  I hope this answer helps anyone with a similar problem.

• DeskJet 3520: 0xB3F1A01C Error Message When you open the printer

  I add the 0x83C00009 error message. But I was able to remove the cartridge and now it has changed to 0xB3F1A01C

  A google search gives no results.

  The power supply for flash button. The inside of the printer will move anything, it's dead.

  What does this error means?

  Hi @Zurd,

  Thank you for visiting the Forums from the HP Support! I understand that you get an error message on your HP Deskjet 3520.

  I would like you to start troubleshooting here: "Problem with print head", "printer failure,' 'Ink system failure', or"0 x."r"C2. "... "Error m...

  «Because there are many variations of these "problem with print head", "Printer failure," or error messages 'Ink system failure' and alphanumeric codes, we have provided guided a few steps to help you troubleshooting document for your mistake right.» Select the statement that best fits your situation. »

  I hope this helps, if you still get the error message, please contact our technical support at www.hp.com/contacthp/. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html