Another computeron the network has the same IP as this computer.

Similar Questions

• I just bought an IPhone 6 Plus. When I get a text Message I get no advice or vibrations. I have all the settings correct. I know many others with the same problem with this phone. Any suggestions?

  I have just purchased IPhone 6 Plus. When I get a text Message I get no notification - no vibration and no noise. I put everything correctly. I know several others who have the same problems with this phone. Any suggestions?

  I have the same problem. You own an iPhone 6 Plus 2/9. Problems began the next day. Phone took over and got another new. Problems with another brand new! Volume is also impoverished - even when up until the end. Extremely frustrated! Any advice would be appreciated.

• When I try my ipad FaceTime I get this massage iphone is not available your phone must be on the same WiFi that this ipad to make a call

  When I try my ipad FaceTime I get this massage iphone is not available your phone must be on the same WiFi that this ipad to make a call

  In your FaceTime settings, what you defined as "Caller ID"?  If you have set up the continuity (continuity use to connect your iPhone, iPod touch and Mac - Apple Support) and you have the iPad set to use your iPhone phone number to initiate calls, then you will need to have your iPhone and your iPad connected on the same wifi ntetwork.

  If you set the iPad caller ID to call from, for example, your iCloud email address, then this message should disappear.

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

  Title: Cannot get an Internet connection!

  Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the
  link and check if the problem persists.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3: Follow the steps below to remove and add the wireless network.
  (a) click Start and select Panel.
  (b) select network and sharing Center and manage the networks without wire (on the left).
  (c) in the list, click on your network and Remove top.
  (d) you can then search for available wireless networks again and reconnect it to your network.
   
  Hope this information helps.

• DISABLE "there is already a file with the same name to this place.

  Window 7. 64 bit. How do you turn OFF DISABLE, CANCEL, DELETE, STOP the pop-up 'MOVE the FILE'?

  As a user since the days of DOS command lines and having had a routine all the way through to XP, this new window is one of the most annoying pop ups for an experienced user. If it isn't a swith toggle check box or an other power selection for this message, there must be. And if there is, you did it quite hard to find.

  The dialog box that appears in Windows 7 that starts with "there is already a file with the same name to this place. It lists then the three choices - "Copy and replace", "Do not copy" and "copy, but keep both files.

  I managed several libraries of forms which oblige me to replace the files throughout my day. I make a copy of the file I replace first of all, for archival purposes and this pop-up box is, well, it's boring. There must be a way to disable.

  This box comes up to move files and to copy the files.

  Any help in these turn off would be appreciated.

  See you soon.

• What is the maximum memory for this computer what kind

  I want to restore my system like new or factory but I have no disk what the best thing to do and what is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  What is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  Maximum RAM

  2 GB

  http://support.Dell.com/support/eDOCS/systems/dsleest/specs.htm#memory

  Note: the manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

  Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.

  You may need to contact the manufacturer of your hardware (Dell) to see what options they have to repair Windows.

  UTC/GMT is 20:35 on Saturday, May 26, 2012

• system says I'm not an administrator, but I'm the only person on this computer.

  I use spy-bot and Norton programs to try to improve performance, and when there are questions, he says I can't recover/remove, change or change because I'm not an administrator. I'm the only person on this computer so what's the deal?

  SpyBot is not as good as it once was and has been superceeded by other free utilities. Using the module TeaTimer is not recommended

  Niether Norton or SpyBot will improve performance, in fact, they are more likely to slow down the system especially if they are both installed on demand / scan in real time

  What exactly you are trying to change/remove?

• Access denied: the IP address of this computer host is not on the list of eligible access of the target.

  Hi all:

  I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

  The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target."  Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

  Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

  Thanks anyway. National Instrument of love. Hope to work there one day.

• I bought photoshop in 2012 and installed on the mac, I had then. I lost the disc and need this computer. How do I install it on my new computer. Any help would be greatly appreciated. Thank you. Josh.

  I bought photoshop in 2012 and installed on the mac, I had then.  I lost the disc and need this computer. How do I install it on my new computer. Any help would be greatly appreciated. Thank you. Josh

  I hope you find the serial number... but if not, it may be worth mentioning that you can use Photoshop and Lightroom for $9.99 / month. It's a big dea; : Lightroom and Photoshop | Plan of creative photography of cloud to Adobe .

• HELP - a clip has been replaced by another of the same number

  Hello

  A project is opened and I was searching for clips via the media browser. I clicked open an item in the source window and somehow, it replaced the element in the project. I do not know what information I should post so that you work out what I mean.

  The original project item was Clip0009.MXF and I merge with audio separated. I created the sequence in the timeline panel and made a massive change.

  Then I went to research, via the media browser for a cut on clip I've done another day. I opened it in the source window to have a quick glance (as my recordings of the camera. MXF files so I can't view them outside of the Prime Minister as you can the .mp4 clips) the clip I opened turns the same incised number Clip0009.MXF (recorded on another day) as the main element in project management. Unfortunately this camera starts from 000 each time I format the SD card.

  Some how the cutaway clip replaced the original clip in the timeline panel and I can't seem to be able to reverse the trend. Now, my project is slowed down after working hours. Norbert here, someone has any ideas bright.

  Any ideas would be greatly appreciated!     There is no available Premier Pro consultants for help. THEY ARE CLOSED not happy Grrrrr thereon.

  Thank you!

  The screen shot below shows where the original clip was replaced by the ring in the clip of Cup. The second shot I imported the original Clip0009 with the ute Tough Dog inside to show you the original with different screen for the cutting of ute white.

  

  

  Name change does nothing for the clip. So a rename/copy-to-here right do anything else than the copy in a directory and rename the files as shown in your preset.

  Transcoding pourrait ... but then, for ease of Assembly and all some of us are sometimes transcode to a "digital intermediate" quality codec (di). Which can actually be used for anything these days.

  Like Cineform YUV which is a 10-bit codec (your media is probably only 8, so that part is a bit exaggerated side) and is quite low on compression. The files are a bit a bit bigger than the camera stand normally, the quality is excellent. And as Jim Simon, another user here, says "this codec changes like butter through the CPU".

  Or say, DNxHD/R. choose a "flavor" which is the same-size/rate your media in a form of HQ and you will have everything your heart could desire in quality. In addition, he rereads and Cineform. You can now use the MXF wrapper for them in PrPro.

  Neil

• Two Macs can connect to a URL, another on the same network may not

  So far, I can connect this behavior to a unique URL only - but of course, it's an I need to get in order to save some software on this particular machine.

  I emptied the cache, flushed the DNS cache and checked that I use valid DNS servers. It isn't Safari, chrome this brings. Two Macs reached the URL without any problem, but this new model Mac Pro simply will not reach it and traceroute expires after a few jumps. All three machines are on the same network, all three use the same DNS servers. I rebooted several times.

  All three Mac running the latest El Capitan. The two reach the URL are a MacBook Pro and a Mac Mini Server.

  I'm puzzled.

  Please note that a traceroute on all three machines reveals the slowdown even at the same jump in the chain, but only the Mac Pro seems to have trouble with it.

• Libraries to share with one another in the same Mac OSX

  My mac has several partitions with different OSXs.

  Can I share itunes libraries I made in an OSX with itunes in the other OSXs in PC?

  Home sharing work in the end? Do I have to allow the Internet to itunes.app in order?

  And supplementary question is, if the above is possible, which is for sharing rules, IE. a library, X, in the itunes of the score has nothing and another library, Y, in the partition of another itunes music title A, B, C, then, what happens when they share libraries? Music tracks A, B, C will be added to X, or all titles there must be gone for nothing?

  Note:

  Versions of iTunes I use are mainly ver11 and ver12 and operating system versions that I use are mainly 10.6 and 10.8.

  SaramandarG wrote:

  ....

  Can I share itunes libraries I made in an OSX with itunes in the other OSXs in PC?

  ....

  Direct access to the library is only possible if all versions of iTunes are identical.

  SaramandarG wrote:

  Home sharing work in the end? Do I have to allow the Internet to itunes.app in order?

  Home sharing works only between two or more computers that are running on the same network.

• USB-6211: analog input signal affecting another of the same map AI

  Hello

  I use the DAQ-nor-6211 map and DAQmx features to read a hammer and a signal of the accelerometer and then use other LabView functions to make the FFT of these analog input signals. However, it seems that the analog inputs where the hammer and the accelerometer are connected generate a kind of noise or influence in other entries of this data that is not connected to any other sensor acquisition board.

  I've had different experiences in order to check if the problem is with reading the card: put the accelerometer and hit the dog in another table where the DAQ card table was located (to avoid the vibrations on the map and a possible noise), ai1 entry was logged on the differential mode on the dog and the ai4 of entry is connected to the output (z axis) of the accelerometer. The other 2 ai2 and ai3, entries that can also be read by my LabView program, are open (i. e., any other sensor is connected to the card). When the structure where the accelerometer is located is struck by the hammer, the signal of ai2 ("x axis" seen in the first attached document) has a curve (on the time domain) which initialize almost at the same time that the hammer and the a3 of entry has a weak signal, but with the swing as well as the signal of ai4. The document "hammer ai1 + z_axis connected_ _x_axis disconnected ai2 + y_axis ai3 ai4" images that I captured the chart created in LabView. On these graphs, it is possible to check on the FFT the ai3 signal and ai4 has the same behavior (with different intensities), and enlarged figure of time domain image, we can see that the signal of ai2 increase almost at the same time of the signal of the hammer (ai1). The signal picked up by the sensors are probably creating a sort of noise on open entries ai2 and ai3.

  Another experiment was conducted to check if the signal from a single entry that may affect the signal read from each other near the entrances: the DAQmx task Create channel had a physical channel has changed: ai3 entry has been modified by ai7 (maintain the same connection mode: differential), and the results are visible on the second attached document. In the graphs obtained in this experiment, it seems that the entrance of the hammer (ai1) affects the signal of input ai2 and ai7, which are not connected. And the ai4 signal does not seem to influence the other inputs, because he has a different curve on the graph of the FFT.

  The same experiment was conducted using the CSR connection (change threads and create the DAQmx Channel Configuration), but the results were the same as those found using differential connection.

  Finally, if the output of the accelerometer is connected on the ai2, the signal of the other open entries ai4 and ai7 seem to be affected by the signal of the accelerometer on ai2 (last document attached).

  Could you tell me if the problem I encounter is caused by the DAQ card with this information that I gave to you? And if the answer is Yes, do you know if there is a way to avoid this noise create in one entry on the other hand, it please?

  Thank you

  Maybe Ghosting or crosstalk? Just an idea.