Another easy question for a beginner

Similar Questions

• Fusion/Windows 7 tips & questions for a beginner

  Hey guys (and girls) I've been a linux user especially lately so I more or less missed the boat on windows 7 but I'm looking to load on my MBP, but I have a few newbie questions if can help people.  I tried to do a search, but I think that my terminology or the lack of good conditions got in my way.

  Some background information, I use a unibody MBP with 4 GB of ram 5.1 which has Snow Leopard and VMware fusion 3.01.

  I am interested in what would work well with the merger of two ways, bootcamp vs install a vmdk and 64-bit vs 32-bit...

  First of all is it an advantage to running vmware fusion with bootcamp, IE merge use the bootcamp partition?  What I see better performance if I instead of use the bootcamp created a virtual machine (vmdk) within the merger?

  Second question is about 32-bit vs 64-bit. I'm under 4gig of RAM which I will devote only 2gig in vmware. Is it interesting (stability, or performance) to the use of 64-bit within the fusion flavor (vm installed not bootcamp) or I'll be better with 32-bit installation?

  If I'm melting point using the bootcamp partition, is third question - interesting to settle current with the 64-bit or 32-bit.  It's merger would provide more performance with the bootcamp windows 7 32 bit, and vice versa (or it does not matter)

  Fourth question, seems, the fusion installs things when you use the bootcamp partition and I guess I'll need to install the tools as well.  That will cause problems, or headaches when I boot physically in training camp, that is, drivers of devices for non-existent devices. What video, nvidia 9600 m in bootcamp vs virtual gpu fusion provides.  I can't wait to see problems when I turned off and restart under bootcamp.

  Last question, I will visit the hell of activation if the bootcamp partition uses two cores, but I just dedicate a molten core when you point the merger to use the bootcamp partition. I don't want to always have to re - activate win7 because when I boot in bootcamp, he sees two hearts but merger only when.

  Thanks in advance

  Mike

  take a deep breath... OK... =)

  Firstly there is an advantage to running vmware fusion with bootcamp

  You get better performance out of hard in this instance. With the help of a physical disk is not the OS X volume would be better than BootCamp, but of course only applicable on a Mac Pro. Rationale: with multiple partitions, the needle on the hard disk has a long way to the second partition, back and forth all the time between Windows and Mac does travel. A hard, as a general rule, would include a contiguous space due to the Mac file system optimizing the layer of block on the fly.

  The advantage of using BootCamp is if you need to take advantage of the full potential of the Mac hardware in a dedicated Windows environment. Such use might be to, say, play games of high quality, latest (Call of Duty, anyone?), at higher resolutions / great detail. Ditto for just about any application for Windows which needs a beefy video system (OpenGL rendering, CAD, stuff like that)

  Is it interesting (stability, or performance) to the use of 64-bit within the fusion flavor (vm installed not bootcamp) or I'll be better with 32-bit installation?

  I would say that no, there is no significant advantage to the use of 64 vs 32 bit in a virtual machine. Stick to 32, it is more compatible with the software and any equipment that you choose to give to Windows (driver for 64-bit stuff support is usually OK, but there is no compelling reason to do it in a virtual machine)

  If I'm melting point using the bootcamp partition, is third question - interesting to settle current with the 64-bit or 32-bit.

  Windows 7 is not supported by BootCamp by Apple, so probably 64 bit will not be 100% working drivers.

  Fourth question, seems, the fusion installs things when you use the bootcamp partition and I guess I'll need to install the tools as well.

  We install tools (drivers and additional software), as well as some tips for handling activation. So we keep some of the files that Windows uses to verify that it has been activated, but due to the change in material Windows must activate two times. Record us each activation, detect when Windows runs in our VM and present key information and activating appropriate to the operating system (to keep him from having to activate every time you pass ="

  What video, nvidia 9600 m in bootcamp vs virtual gpu fusion provides. I can't wait to see problems when I turned off and restart under bootcamp.

  I did not talk about all issues related to the video does not when it is started normally. Windows detects that hardware is present at startup, check if it uses drivers and goes from there.

  Last question, I will visit the hell of activation if the bootcamp partition uses two cores, but I just dedicate a molten core when you point the merger to use the bootcamp partition

  N ° again, we keep the profile "enabled" and save it.  When the BONE is introduced in the merger, we use our activation profile.  When you started in native mode, it uses that have never appeared by activating in Bootcamp.

  The direct answer to 'can I use bootcamp or hard' would be: depends on what you want to do with the virtual machine.  If it's general things, you're good... If you're a gamer or CAD designer, BootCamp is a good option.  =)

• Quick question for a beginner

  Hello world

  I spent about half a day looking for what I want. I read the guide to Illustrator scripts and browsed forums but I can't find an answer so here's my question:

  I have an Illustrator file.

  I have 3 layers in this file called "L", "M" and "S" (for size).

  In each layer, there are two elements of text with something written inside. They are always named 'Name' and 'number '. I created everything using my mouse and keyboard, no script.

  It looks like:

  L (layer)

  Name (text)

  Number (text)

  M (layer)

  Name (text)

  Number (text)

  S (layer)

  Name (text)

  Number (text)

  I want to choose a specific name in the M layer, for example. I can't find a way to do...

  myDoc = app.activeDocument var
  myLayer = myDoc.layers var [1] / * myLayer is "M" * /.

  I read that it is possible to access the textframe wanted to help: myDoc.textFrames [2] / * 2 refers to the third text element within the framework of related texts document. */

  My problem is that I can have a big file with tons of other executives of related texts, so I would get called a 'name' in the layer of "M" without knowing his rank in the frames of related texts document.

  I tried var myText = myDoc.myLayer.textFrame but obviously myLayer didn't linked text frames, it only works with documents, or I missed something.

  I hope that you guys understand my problem.

  Thank you for your help.

  Hi totom, welcome to the forum

  Layers have linked text frames, you were very close, here is the syntax to do what you want

  var idoc = app.activeDocument;
  var ilayer = idoc.layers["M"];
  var iframe = ilayer.textFrames["Name"];
  
  iframe.selected = true;
  

• easy question for all

  Hello

  WHEN I BUY A PC/LAPTOP DO I RIGHT FOR THE WINDOWS CD (THAT IS TO SAY WINDOWS XP CD O WINDOWS VISTA CD) WITH THE PRODUCT KEY.

  AM ASKING CAUSE WHERE AM FROM, THEY DON'T GIVE YOU NOTHING AND WHEN YOUR COMPUTER IS NOT GOING OR SE BREAKS DOWN AND HIS REQUEST FOR THE CD, I CAN'T THE DO IT MYSELF. I NEED TO TAKE TO THE STORE AND PAY MORE MONEY.

  I BOUGHT A PC A COUPLE OF YEARS AGO AND HE BROUGHT THE WINDOWS 98 CD, SINCE THEN NOTHING VIEW

  All suppliers to be in compliance with the certificate of the system of manufacturers, shall provide the end-user a method to return the machine to the specifications of the ex-factory. This can be in several forms. A 'good' Windows CD and a CD of drivers (rare these days), or a recovery DVD and more often now, a hidden hard disk restore Partition.

  You should consult the documentation that came with your computer to determine which method your particular vendor supplied with your computer.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• SQL question for a beginner...

  I have the following structure:
  
  NUMBER OF PROCESSING_ITEM_ID
  NUMBER OF PROJECT_ITEM_FK
  START_TIME DATE
  END_TIME DATE
  NUMBER OF WORKSTATION_FK
  
  examples of data
  
  81,23,10-27-2010 08:00, 27/10/2010 10:00, 3
  42,1,10-27-2010 08:00, 27/10/2010 11:00, 1
  22,23,10-27-2010 13:00, 27/10/2010 17:00, 2
  1,23,10-27-2010 15:00, 27/10/2010 16:00, 1
  23,23,10-27-2010 17:00, 27/10/2010 20:00, 2
  
  I'm trying to divide the data into lines of an hour. If this line we would be divided into:
  
  81,23,10-27-2010 08:00, 27/10/2010 09:00, 3
  81,23,10-27-2010 09:00, 27/10/2010 10:00, 3
  
  third row would be divided into:
  
  22,23,10-27-2010 13:00, 27/10/2010 14:00, 2
  22,23,10-27-2010 14:00, 27/10/2010 15:00, 2
  22,23,10-27-2010 15:00, 27/10/2010 16:00, 2
  22,23,10-27-2010 16:00, 27/10/2010 17:00, 2
  
  The statement that is made should display the data in this way...
  
  John Brewer
  City of Seattle

  Question delicate John, you should ask this in the SQL forums

  This is the query

  with temp AS
       (
        SELECT 81 PROCESSING_ITEM_ID,23 PROJECT_ITEM_FK,TO_DATE('10-27-2010 08:00','MM-DD-YYYY HH24:MI') start_date,TO_DATE('10-27-2010 10:00','MM-DD-YYYY HH24:MI') end_date,3 WORKSTATION_FK from dual
        UNION ALL
        SELECT 22 PROCESSING_ITEM_ID,23 PROJECT_ITEM_FK,TO_DATE('10-27-2010 13:00','MM-DD-YYYY HH24:MI') start_date,TO_DATE('10-27-2010 17:00','MM-DD-YYYY HH24:MI') end_date,2 WORKSTATION_FK from dual
        )
      ,time_span AS
      (
       SELECT MAX( TO_NUMBER(TO_CHAR(end_date,'HH24')) - TO_NUMBER(TO_CHAR(start_date,'HH24')) ) TIME_SPAN
       FROM temp
      )
      ,time_period_rows AS
     (
      SELECT level-1 PERIOD FROM time_span connect by level <= TIME_SPAN
     )
  SELECT T.PROCESSING_ITEM_ID,T.PROJECT_ITEM_FK,TO_CHAR(T.start_date+TR.PERIOD/24,'MM-DD-YYYY HH24:MI') start_time,TO_CHAR(T.start_date+(TR.PERIOD+1)/24,'MM-DD-YYYY HH24:MI') end_time ,T.WORKSTATION_FK
  FROM  temp T
       ,time_period_rows TR
  WHERE PERIOD <= TO_NUMBER(TO_CHAR(end_date,'HH24')) - TO_NUMBER(TO_CHAR(start_date,'HH24'))
  ORDER BY T.PROCESSING_ITEM_ID,TR.PERIOD
  

  Output

  PROCESSING_ITEM_ID     PROJECT_ITEM_FK     START_TIME     END_TIME     WORKSTATION_FK
  22     23     10-27-2010 13:00     10-27-2010 14:00     2
  22     23     10-27-2010 14:00     10-27-2010 15:00     2
  22     23     10-27-2010 15:00     10-27-2010 16:00     2
  22     23     10-27-2010 16:00     10-27-2010 17:00     2
  81     23     10-27-2010 08:00     10-27-2010 09:00     3
  81     23     10-27-2010 09:00     10-27-2010 10:00     3
  81     23     10-27-2010 10:00     10-27-2010 11:00     3
  

  I used a view inline as data source ( temp ), you can change this to your table, name (then remove the display online)

• Can't access the internet - easy question for the experts! (ASA 5510)

  Dear all

  I can't access internet from my home network!

  I don't know why!

  Router:

  Ethernet f0/0 interface: 195.xxx.xxx.17/29 (to connect to the router) IP

  THE ASA NETWORK

  The external interface e0/0: 195.xxx.xxx.18/29 IP (to connect to the router)

  Internal interface: e0/1: IP 10.10.100.1 mask 255.255.252.0

  The ASA configuration

  ASA Version 8.0 (2)

  !

  ciscoasa hostname

  domain.com domain name

  enable encrypted password xxxxxxxxxxxx

  names of

  DNS-guard

  !

  interface Ethernet0/0

  nameif Interface_to_cisco_router

  security-level 0

  IP address 195.xxx.xxx.18 255.255.255.248

  !

  interface Ethernet0/1

  nameif Int_Internal_domain

  security-level 100

  address 10.10.100.1 IP 255.255.255.0

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 192.168.1.1 255.255.255.0

  management only

  !

  xxxxxxxxxxxxx encrypted passwd

  boot system Disk0: / asa802 - k8.bin

  passive FTP mode

  clock timezone WEST 0

  clock summer-time WEDT recurring last Sun Mar 01:00 last Sun Oct 02:00

  DNS domain-lookup Interface_to_cisco_router

  DNS domain-lookup Int_Internal_domain.com

  DNS server-group DefaultDNS

  Server name 195.22.0.136

  Server name 195.22.0.33

  domain.com domain name

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  Interface_to_router_Cisco_access_in list extended access allowed object-group TCPUDP any any eq field

  Interface_to_router_Cisco_access_in list extended access permit tcp any any eq www

  pager lines 24

  emergency logging level list Registo_eventos_william

  emergency logging list level Registo_eventos_william class vpn

  asdm of logging of information

  exploitation forest-address recipient [email protected] / * / critical level

  management of MTU 1500

  MTU 1500 Interface_to_router_Cisco

  MTU 1500 Int_Internal_domain

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 602.bin

  don't allow no asdm history

  ARP timeout 14400

  Global interface (Interface_to_router_Cisco) 101

  NAT (management) 101 0.0.0.0 0.0.0.0

  Access-group Interface_to_router_Cisco_access_in in the Interface_to_router_Cisco interface

  Route 0.0.0.0 Interface_to_router_Cisco 0.0.0.0 195.xxx.xxx.17 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout, uauth 0:05:00 absolute

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 10.10.100.0 255.255.255.0 Int_Internal_domain

  http 10.10.10.0 255.255.255.0 management

  http 195.xxx.xxx.16 Interface_to_router_Cisco 255.255.255.248

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  No encryption isakmp nat-traversal

  Telnet 10.10.100.0 255.255.255.0 Int_Internal_domain

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd address 10.10.100.20 - 10.10.100.250 Int_Internal_domain

  dhcpd dns 10.10.100.2 195.22.0.136 interface Int_Internal_domain

  dhcpd lease interface 345600 Int_Internal_domain

  dhcpd domain domain.com Int_Internal_domain interface

  enable Int_Interna_domain dhcpd

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  !

  class-map inspection_default

  match default-inspection-traffic

  Thanks in advance

  MP

  Hi MP,.

  Based on the configuration below, only traffic since the possible management interface to access the internet.

  Global interface (Interface_to_router_Cisco) 101

  NAT (management) 101 0.0.0.0 0.0.0.0

  You must include your inside interface in the nat statement if you want to have the traffic within the internet go.

  Example:

  NAT (Int_Internal_domain) 101 0.0.0.0 0.0.0.0

  Kind regards

  Arul

  * Rate pls if it helps *.

• Easy question for the literate of photoshop

  Hi I'm new to photoshop and I'm trying to teach me how to use it, I had bought a few photoshop actions and did very well, and then all of a sudden the entire column disappeared from the right side of the screen, how can I bring back? Thanks in advance!

  Just thought out, go to the menu bar, then windows and click actions. They're back, woohoo!

• Easy question

  When file sharing / information wirelessly between the computer connected to my network via my home wireless router, not information trip computer to the router to the second computer or information travels from computer to the router via the modem and then return via the modem to the router and then to the second computer?  I hope that it will be an easy question for someone.  Thank you.

  File on your network as you transfer the describe does not mean the modem, router and computer, any computer.

• What is the best book/s and/or video (s) on teaching AS3 for a beginner?

  Can you please recommend what you plan is currently the best book/s and/or teaching

  videos (indicating why, otherwise it won't help) on teaching ActionScript 3 with Flash CS5

  (in terms of power well understand and write AS3 also correctly), someone who of

  never done before programming and is a beginner.

  I ask mainly, as many textbooks of AS3 claim is intended for beginners, but really aren't and are

  misleading, because they are really intended for people who have done before emissions.

  I was ready to throw you a whole list of resources, but the mention of 'someone who never did before programming and is a beginner' prevented me to do.

  Programming requires training your mind to follow a thinking pattern that takes time to develop. While something can exist, I don't know that everyone has prepared a resource that guides a person through the basics of using Actionscript 3 programming as the learning vehicle.

  What you are more likely to find that you have already found... tutorials that jumps in the middle of the learning curve and expect that you understand the basics, or more. They won't explain what a condition or a loop does as a programming tool. Tutorials that say... "How make one...". "aren't teach you programming, they teach you how to copy something.

  In my view, that any person must first learn the programming at the most basic levels initially.  Once you understand the basics well, learn a new language becomes an easier question to find out how a new language that you know can be done.  This type of learning is generally easier to find in a school environment, well I'd be willing to bet that someone has prepared lessons of programming base which is available for free on the web, probably all just not for Actionscript... and I may be wrong in concluding what.

• Is there an easy way for me to go back to the old format for Mazilla Firefox?

  I have problems with the new version of Mozilla Firefox. Is there an EASY way for me to go back to the old format?
  Thank you!
  JES
  PS Please, please... Be very specific about what to click on and where to go... I'm still learning about computers. Thanks again.

  I suggest you another go to Firefox 4.0 comfortable for you, and it would be
  be faster for changes that will bring back to 3.6.17 or at least a lot more and the changes you need to do, sooner or later, whether for Firefox 4, Firefox 5 or Firefox 6...

  You can make Firefox 4.0.1 resemble Firefox 3.6.17, paragraphs numbered 1 to 10 in the next topic difficulty Firefox 4.0 UI toolbar, problems (make Firefox 4.0 look like 3.6)

  If still not convinced of the next section on this page is performing Fx3 Fx4 or returning to the Fx3 (#backto3pt6)

• Cannot install Windows Easy Transfer for update to Windows 7

  I am running Vista Home Premium 64-bit sp2 and upgrade to Windows 7 Pro. I know I need everything back up, install 7 and then restore my data and programs. When I install Windows Easy Transfer, it downloads very well, then on run I get 'Stand Alone Windows Update installation', then "Looks For Updates" and then "update applies to my system" and nothing, fact. I made sure I download the Easy Transfer for Vista 64 bit, but I'm stumped. Any ideas?

  Hello
   
  Windows Easy Transfer is an integrated application available on all editions of Windows Vista or Windows 7. It is not necessary to download explicitly on the Vista computer.
   
  To access Windows Easy Transfer, try the following steps.
  1. click on start, type Windows Easy Transfer and click transfer files from Windows in the list.
  2. follow the instructions in the wizard and complete the tasks successfully.
   
  Check out these links for more information:
  1 explore the features: Windows Easy Transfer:
  http://www.Microsoft.com/Windows/Windows-Vista/features/easy-transfer.aspx
  2. the transfer of files and settings: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions
  3. install, reinstall, and uninstall Windows:
  http://Windows.Microsoft.com/en-GB/Windows/help/install-reinstall-uninstall
   
  Let us know if you have any questions, so that we can clarify.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Multiple entries for app (Beginner)

  I'm new to BB, so I question seems simple for everyone, but not for me.

  If I want an app to run with multiple command-line arguments which is the good method for that download in the Simulator?  I tried to create two projects/workspaces separate where one is dedicated to the arg a command line in the properties for the project and the other is implemented for other arguments and I download one after the other but seems to only get one or the other work, not both at the same time in the Simulator... how it should be addressed?

  It is not 'simple for everyone'. Fortunately, there is enough documentation on it - you want to create alternative entry points.

  Here is a link:

  Set up another entry point for an application - JDE only

  For Eclipse, double click on BlackBerry_App_Descriptor.xml to the project and select the other tab Entry Points (find the legs down). The interface is pretty straighforward.

  Good luck!

• Is there an easy way for me to export trimmed clips from one location?

  Is there an easy way for me to export trimmed clips from one location?

  I prepared her and filled with a bunch of garbage separate of footage in Premiere Pro session intro - I need to send these clips adjusted to another studio that does not use adobe in post.

  You can export a single item in the project Panel and choose Clip range as your Source in and out, but you can't do this for multiple clips. Could you create a sequence from each of these locations and then export an XML sequences to then send to the other studio, or want to send them the small clips adjusted if you do not have to send the raw images?

  Alternatively, if you use a version of first after the introduction of the multiple clip export option, you can do this with additional manual work. You can select each clip in your tray and choose to make a subelement and click the check box restrict stripes to a subelement Boundries. Then, you can select all your subitems in your bin and exports since the project Panel.

• Question for the host resource

  Hello

  We have 1 blade that hosts a physical SQL Server on it. The resources of this blade are 10 total to 20 cores processors and 512 GB of RAM on it. We want to virtualize it soon, but we don't have any other guests that we could use this size. We have a few available hosts that are 8 to 16 cores CPU and 256 GB of RAM. I was hoping that I could create a cluster with 2 of these hosts and virtualize the largest physical machine in the cluster. I know that when I virtualize this machine, he will live on one of the hosts at any given time. My question is if these hosts would be 'pool' their resources so that this machine could use more than a single host would offer it. Is it possible at all or not? If not is there another work around for this problem I have?

  We are on vSphere 5.5

  Thank you

  My question is if these hosts would be 'pool' their resources so that this machine could use more than a single host would offer it. Is it possible at all or not? If not is there another work around for this problem I have?

  No, the maximum resource that can use a particular virtual machine will be limited by the maximum available on a single host computer running this VM particular resource. Workaround is to add more physical resources on the host or create the virtual computer with limited resources. Are you sure that your virtual machine uses really 20 the processor cores and 512 GB of RAM? Most of the workload running on the physical server uses all resources.

• I already subscribe to photoshop with 2 pc, but I would like to add another 2 pc for a total of 4. [was: help me!]

  Salve,

  avrei aiuto need my non parlo in inglese.

  Sono gia Abimael con photoshop 2 pc, my I would add other 2 pc per UN total 4 di.

  Come posso fare? A chi posso rivolgermi visto che funziona not the cat?

  VI want

  Hello
  I need help, but I do not speak English.
  I already subscribe to photoshop with 2 pc, but I would like to add another 2 pc for a total of 4.
  How can I do? Who should I contact because the cat does not work?
  Thank you

  If you are going to use a computer at any time, you can use your subscription single user one for all 4 computers.

  You can only connect, until, two computers at all once so you will need to do a few signature, but adobe make it very easy to do.  for example, you can disconnect from your other 3 computers using your computer 4.