Another HP 3050 has cannot print wireless posts

Similar Questions

• HP 3050 has J116g: How do install you a printer HP 3050 has J116g internet wireless

  We have a wireless NETGEAR but not internet router.

  I created one with the Internet several times without problem.

  How do install you a range of printers HP 3050 has J116g as wireless internet?

  Thank you!

  Thank you for responding @tollymcc

  The Netgear should disseminate its own signal, you should be able to view and connect to available wireless networks on your computer.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Deskjet 3520 cannot print wireless!

  Hello

  just bought a HP Deskjet 3520, but it cannot print wireless!

  the printer is properly configured and connected to my wireless network, I ran a page of test result of wireless network and all results are pass.  but when I tried to print somethings of my 64-bit Windows 7 notebook, which is connected to the same wireless network, the print job is broken.  I also tried to open the built-in Web server, but did not as well.  It cannot display the EWS page.

  I don't really know what went wrong, please kindly help me provide information to solve these problems.  Thank you very much.

  Digitization is when you can place the paper on the glass and the SCANNER to the computer. The document that was on the screen of the printer, is now available on the computer. Who is scanning.

  You could also click the icon of the printer (Solution Center) on the computer. Choose Scan of the computer.

• cannot print wireless to wireless using a but access point wired printing (pc) wireless technology is very well

  I have a HP OfficeJet 8600plus N911a CM749A # product who has problems in this impossible to print wireless to wireless using an access point but Wired print (pc) wireless technology is fine. We have 4 pcs in a network cable that work very well try to print to the printer which is connected wireless. They installed the software and discovered the printer very well. When you try to install the printer on a Win8 Tablet and a laptop Win7 that neither would discover the printer, so I have two devices connected by ethernet cable and ran the facilities in the same way as the PC and installed everything and worked fine. But, after I disconnected the wire and reconnected or the other device wireless again (they go OK so I know that they get an address) when I go to print to the 8600 it says there is no communication to the printer. BTW, I can install (and installed) other (cable) HP printers on the network as the computer laptop and Tablet AUTODECOUVERTS and print... Yes, ideas on why it loses its Wireless communication to the wireless printer. He turns a few odd Protocol or discovered that did not pass on a wireless system?

  Thank you for answering my question and I wanted to know was the brand of the router.  I suggest making sure the router firmware is up to date as well.

  Here is a link to a post I did on the various ports used by HP printers for reference.

  -Incoming and outgoing Ports-

  So all your work computers don't encounter this issue?  Once again, while in the router, verify that wireless isolation is not activated.  A question also, I do not see has anti-anti-virus/firewall you had on your main computer that you are using?  Maybe it's not the cause, but that depends on the software, too.

  -Security and Firewall.

  You have all the exclamation points in your device manager?

  Let me know what is happening when you try another access point.

• Cannot print wireless even if 6510 is connected to my network

  Hello

  I bought a Photosmart 6510 who said I could print wireless and also use AirPrint for my iPhone.

  I am running Windows 7, connected the printer on the network, run a test report which shows that everything is connected, strong signal, IP address, etc.  Everything looks good at this point.

  When I try and add a printer through Windows and her request to connect through the network, I get to the point in the configuration where the IP address is required, but then he says: I can't sign in - cannot find the printer!

  I have downloaded and run the troubleshooter of HP, but in vain.  None of the solutions work.

  I can print when I connect to a USB port, but that defeats the purpose I have to drag the laptop to the printer, plug it, etc... not really what I signed up for!  Also iPhone can't find the printer, even if the phone, laptop computer and the printer are all connected to the network.

  If anyone has the offerings that I'd love to hear from you.

  Thanks in advance.

  Try to disable your firewall temporarily to see if it is the culprit.

• HP Deskjet 3050 has J611 printer without a driver.

  What happens to my driver for my printer HP 3050 has J611 it saids no driver?

  [Moved from comments]

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Mac cannot print wireless HP Officejet Pro 8600 Premium

  I have a wireless network of office with some Mac and some PC and an HP Officejet Pro 8600 Premium.   During the initial Setup, the first Mac was able to print fine, but today, he was not able to print.

  Two PC can print wireless with no problems.  Macs are struggling, but it's different for each:

  Mac #1-OSX 10.8.5) printer installed via the installation CD.  He worked for a week, then stopped working today.    I sent a print job, and he was sitting in the buffer always 0%.  He never gave an error, but it has never printed.  Then I uninstalled the printer and added via system preferences and got the message "Unable to communicate with the printer right now" while the installation failed.   However, I am able to navigate to the IP address of the printer from a browser and see all the parameters.  I am also able to scan FROM the printer to this computer, then it is certainly communication he...

  2 mac - OSX 10.7.5) installed system Prefreences without problem printer.  Sent a print error-free job, but he blocked indefinitely in the buffer to 100% and never printed.   This Mac was able to print via USB.

  We are on the same wireless network.  The printer is configured with a fixed IP address.  Any ideas?

  Hello whatkatiedoes,

  I understand your frustration I want to gather some information so that we can begin troubleshooting.

  Did you update firmware for your OfficeJet 8600 Premium? If this isn't the case, I wish that install you this, it was released 23/7/2013 click here to update the firmware.

  Also we will go forward and restore the default network on your printer, go to the front panel of your printer and follow the steps below:

  Menu Configuration > Tools > restore default settings

  Now that we have a 8600 OfficeJet updated premium and have restored the default values. I want to you now to connect wireless using the Wireless, Setup Assistant which is also found in the front panel of your printer. Steps listed below:

  Menu Setup > network > Wireless Setup Wizard

  Once these steps have been performed, you can now try to re run the installation software. Here's the direct link for HP Officejet Pro Full Feature software and driver - Mac OS X 10.8. Please let me know the result and if it was successful, I hope to hear from you soon.

  Thank you

• Cannot print wireless but the scan works

  Hello I have an Officejet 6500 a Plus which used to allow me to print wireless, but suddenly stopped.  I can scan to the computer but just can't print wireless.  I run a wireless network test report and the results are good.  When I run a test to check the wizard of the printer ink levels, I get a message indicating that the computer is unable to establish two-way communication with the device.  I turned the router, the printer and the laptop works, but nothing has changed. I also tried two different computers unsuccessfully. Any help is appreciated.

  Hello, thanks for the suggestions.  I removed and downloaded the drivers once again and it started working.  Interesting that it was a problem on my two laptops, but at home was very good.  No idea what happened, but I had to re - install the drivers on both of my laptops.

  Thank you very much for the help.  Good to know I'm not request around alone in the dark.

• Cannot print wireless laptop

  Printers: HP Deskjet 3050

  OS: Windows 7

  Background: I got a new wireless router.  Desktop, laptop, iPad and Kindle Fire all works well; Wireless Internet available on all devices.  In addition, I can print wireless from our office.

  Problem: I can't print wireless from laptop.  Using REVO UNINSTALLER, I uninstalled the printer and all software.  I then tried, unsuccessfully, to reinstall.

  Question: Can you help me?  TX so much.

  Now, download and run the print and Scan Doctor:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E17-1&h_keyword=DG-PDU&JumpID=ex_r4155/en/HHO/IPG/Forum/printer_diag/

  Must execute you configuration device for this device.  If it isn't, then your drivers are there and you should be able to print.

• Cannot print wireless with Canon Pixma MG3120 but can print via USB

  Original title:

  thing.i same cannot connect wireless on mypixma mg3120 printer.did reinstall and shows ok to print, but will not go wireless when I disconnect usb setup cord.tryed everything to fix.

  Hello
   
  Method 1:
   
  Check out the following link.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
   
  Method 2:
   
  Step 1: Perform a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.
   
  Step 2: Install the drivers from the disc and check.

• DeskJet Ink Advantage 3635: Cannot print wireless and scan

  Shop I bought says it is compatible and when I brought home for them to check, they could not solve my problems.

  Can not find the model on the list. HP team, is it compatible? What can I do?

  Hello

  Thank you for choosing HP. I understand that you are unable to install the printer wireless operating system windows 10.

  DeskJet 3635 is not compatible with the operating system windows 10.

  Thank you

• HP Deskjet 2542: Cannot print wireless Deskjet 2542 after installing the new modem/router

  We have recently installed a new Netgear modem/router and have not been able to print wireless since installation. I tried everything I could find on the forum and still no luck. Any help will be appreciated.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try each of the channels one at a time.  Make sure they are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• Cannot print wireless since Snow Leopard upgrade

  I have an Office Jet all in one j6450. Since upgrading to Snow Leopard, I can't print wireless. I downloaded the new drivers. I also can I print a wireless test page so the signal is there, but I can't seem to print documents. I tried to uninstall, reinstall, perusing the printer utility, manually add the printer, etc, etc, etc. Any other suggestions? Thank you.

  Thank you very much, it followed all in good order and it worked!

• Cannot print wireless with photosmart 2575

  Confused!  I have an Apple iBook G4, which is connected to the internet wireless via Belkin router D-Link 802.11 g and it works fine but I can't get my computer or printer to print wireless - a pc on the same wireless network is able to print wireless simply not my iBook. I connect the printer directly to my computer right now via USB. What should I do to activate my computer to print wireless? Need in plain language to help please!  Thank you

  You have uninstalled the software (using the uninstall software in Applications, Hewlett-Packard)?  Do this and then install the software that I linked above (not the CD-ROM), follow the instructions in the manual that I linked to.

• Cannot print wireless with the new windows 7 and the new printer the series wireless Kodak ESP 5200

  We have recently installed Windows 7 and a new printer wireless, Kodak ESP 5200.How can we get the printer to print wireless. At the present time he refuses just!

  * original title - we have new Windows 7 and the new Kodak ESP 5200 series wireless printer. How do we get the printer to print wireless? It will be printed next but not when disconnected *.

  Hi John and PaulineWhite,

  See the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  I hope this helps!