another namespace issue? 'CameraSettings' was not declared in this scope
I have a camera native c ++ application coded and run successfully.
I want to change the flash mode. So I add:
CameraSettings* cameraSettings = new CameraSettings(); cameraSettings->setFlashMode(CameraFlashMode::Light); camera->applySettings(cameraSettings);
I also add:
#include#include
When I build, I get the error:
'CameraSettings' was not declared in this scope.
Is it a matter of namespace or a:
LIBS += ?
... question?
Something else?
My current LIBS:
LIBS += -lcamapi -lscreen
I see what is happening, I mix with QT c functions.
I need to use the settings as shown in this example:
Thanks for your help.
Tags: BlackBerry Developers
Similar Questions
-
error "Ibsta" no was not declared in this scope
I have a "error: 'Ibsta' was not declared in this scope."
I try to program with C++ and GPIB test equipments, but so far, I have this problem.
I'm sorry, but my knowledge of C++ is very limited because I took a module on it for about 4 months in College and now I have to rectify emergency for my project. Any help would be much apprciated, I tried searching the forums, but I still have to find an answer. I think it has something to do with my linker. BTW, I use Code blocks to compile program, so it may be different from other IDEs posted here such as Microsoft Visual C++, Borland, Dev C++.
The program that I write to you is as follows:
#include
#include "ni488.h".
#include
#include
#include "Decl. - 32.h"
#includeusing namespace std;
void GpibError (const char * msg); / * Function to Error statement * /.
Device int = 0; / * Peripheral device descriptor * /.
int BoardIndex = 0; / * Interface index (GPIB0 = 0, GPIB1 = 1, etc..) * /.int main() {}
int PrimaryAddress = 28; / * Main unit address * /.
int SecondaryAddress = 0; / * Secondary unit address * /.
char Buffer [101]; / * Read buffer * /./*****************************************************************************
* Boot - made only once at the beginning of your application.
*****************************************************************************/Device = ibdev (/ * create a device descriptor pointer * /)
BoardIndex, / * Board Index (GPIB0 = 0, GPIB1 = 1,...) * /.
PrimaryAddress, / * address of the primary device * /.
SecondaryAddress, / * peripheral secondary address * /.
T10s, / * delay (T10s = 10 seconds) option * /.
1, / * line EOI assert at the end of writing * /.
(0); / * Mode of termination EOS * /.
If (Ibsta() & ERR) {/ * find GPIB error * /}
GpibError ("ibdev Error");
}ibclr (Device); / * System * /.
If {(Ibsta() & ERR)
GpibError ("ibclr Error");
}/*****************************************************************************
* Body - writing the majority of your GPIB application code here.
*****************************************************************************/ibwrt (device, "* IDN?", 5 "); / * Send the command ID of the query * /.
If {(Ibsta() & ERR)
GpibError ("ibwrt Error");
}Bird (device, buffer, 100); / * Read up to 100 bytes of the device * /.
If {(Ibsta() & ERR)
GpibError ("Bird error");
}Buffer [Ibcnt ()] = '\0 '; / * Null terminate the string ASCII * /.
printf ("%s\n", buffer); / * Print the device identification * /.
/*****************************************************************************
* UN-initialize - done only once at the end of your application.
*****************************************************************************/ibonl (device, 0); / * Turn off the line * /.
If {(Ibsta() & ERR)
GpibError ("ibonl Error");
}}
/*****************************************************************************
* Function GPIBERROR
* This function will warn you that a function of NOR-488 failed by
* a print error message. The State IBSTA variable will also be
* printed in hexadecimal with the senses mnemonic of the forest
* position. The State IBERR variable will be printed in decimal form
* with the mnemonic significance of the decimal value. The status
* Variable IBCNT will be printed in decimal form.
*
* The NOR-488 IBONL function is called to turn off the equipment and
* software.
*
OUTPUT Comptrollership will end this program.
*****************************************************************************/
void GpibError (const char * msg) {}printf ("%s\n", msg);
printf ("Ibsta () = 0 x %x<",>
If (Ibsta() & ERR) printf ("ERR");
If (Ibsta() & TIMO) printf ("TIMO");
If (Ibsta() & END) printf ("END");
If (Ibsta() & SRQI) printf ("SRQI");
If (Ibsta() & RQS) printf ("QR");
If (Ibsta() & CMPL) printf ("CMPL");
If (Ibsta() & LOK) printf ("LOK");
If (Ibsta() & REM) printf ("REM");
If (Ibsta() & CIC) printf ("CIC");
If (Ibsta() & ATN) printf ("ATN");
If (Ibsta() & TAC) printf ("TAC");
If (Ibsta() & MFP) printf ("LAKES");
If (Ibsta() & CDI) printf ("CDI");
If (Ibsta() & DCAS) printf ("DCAS");
printf ("" > \n ");printf ("Iberr() = %d", Iberr() ");
If (Iberr() == EDVR) printf ("EDVR\n");
If (Iberr() == ECIC) printf ("in ECIC\n");
If (Iberr() == ENOL) printf ("ENOL\n");
If (Iberr() == EADR) printf ("EADR\n");
If (Iberr() == HELLO) printf ("the GRAE\n");
If (Iberr() == ESAC) printf ("ALD\n");
If (Iberr() == EABO) printf ("EABO\n");
If (Iberr() == ENEB) printf ("ENEB\n");
If (Iberr() == PAES) printf ("PAES\n");
If (Iberr() == ECAP) printf ("ECAP\n");
If (Iberr() == EFSO) printf ("EFSO\n");
If (Iberr() == USBE) printf ("USBE\n");
If (Iberr() == ESTB) printf ("ESTB\n");
If (Iberr() == ESRQ) printf ("ESRQ\n");
If (Iberr() == XTAB) printf ("Established\n");
If (Iberr() == ELCK) printf ("ELCK\n");
If (Iberr() == MART) printf ("MART\n");
If (Iberr() == EHDL) printf ("EHDL\n");
If (Iberr() == EWIP) printf ("EWIP\n");
If (Iberr() == ERST) printf ("ERST\n");
If (Iberr() == EPWR) printf ("EPWR\n"); printf ("Ibcnt () = %u\n", Ibcnt() ");
printf ("\n");/ * Call the ibonl to get the device and interface offline * /.
ibonl (device, 0);"exit" (1);
}The program I had is a sample I found the Instrument National software called GPIB Explorer.
-
error: 'QmlDocument' was not declared in this scope
I followed along the following:
https://developer.BlackBerry.com/Cascades/documentation/UI/integrating_cpp_qml/index.html
And added the following code to main.cpp:
#include
#include #include "app.hpp" using ::bb::cascades::Application; int main(int argc, char **argv) { Application app(argc, argv); QmlDocument *qml = QmlDocument::create("main.qml"); AbstractPane *root = qml->createRootNode(); Application::setScene(root); return Application::exec(); } When compiling, I get the error:
error: 'QmlDocument' was not declared in this scope
Your weird namespace.
using bb::cascades;
Try this.
Edit: Also if I were you I wouldn't want to create a new project and select HelloCasades as a model. That will be running a lot faster than to try to do it from scratch.
-
'DAQmxReserveNetworkDevice' was not declared in this scope
Hey guys. I have a problem with this function. I have already included NIDAQmx.h in my aplication c ++ and the functions of this header works. However, I was checking and "DAQmxReserveNetworkDevice" was not included in the header, identical to DAQmxAddNetworkDevice. How to use these functions in my application c ++ then?
I got it. I just added the function in the NIDAQmx.h, so now I'm able to use the service. I write in attachments of the header file where everyone needs
-
Error "batteryInfo" has not declared in this scope
Hi, I have this error in my project, I understand the example of the battery of the sample, but I get the error of generation.
'MarcossitMobile10::MarcossitMobile10(bb::cascades::Application*)': ../src/MarcossitMobile10.cpp:17:42: error: 'batteryInfo' was not declared in this scope cc: C:/bbndk/host_10_0_9_404/win32/x86/usr/lib/gcc/arm-unknown-nto-qnx8.0.0eabi/4.6.3/cc1plus caught signal 1 make[2]: *** [o.le-v7-g/.obj/MarcossitMobile10.o] Error 1 make[2]: Leaving directory `C:/Users/marcossit/ndk-10.0.9-workspace/MarcossitMobile10/arm' make[1]: *** [debug] Error 2 make[1]: Leaving directory `C:/Users/marcossit/ndk-10.0.9-workspace/MarcossitMobile10/arm' make: *** [Device-Debug] Error 2 **** Build Finished ****
I don't understand this part I declare scope
This is the main.cpp Batterysample
/* Copyright (c) 2012 Research In Motion Limited. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include
#include #include #include #include #include using namespace bb::cascades; using namespace bb::device; /** * This sample application shows some basic * usage of the BatteryInfo API, such as charging level and charging state. */ Q_DECL_EXPORT int main(int argc, char **argv) { qmlRegisterUncreatableType (); Application::instance()->setScene(appPage); return Application::exec(); } It's my main.cpp
/* * Copyright (c) 2012 Jason I. Carter * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "Flashlight.hpp" #include
#include #include #include #include #include #include #include "MobileMarcossit.hpp" #include "RegistrationHandler.hpp" #include "InviteToDownload.hpp" #include using namespace bb::cascades; using namespace bb::cascades::advertisement; Q_DECL_EXPORT int main(int argc, char **argv) { // this is where the server is started etc Application app(argc, argv); // localization support QTranslator translator; QString locale_string = QLocale().name(); QString filename = QString( "MobileMarcossit_%1" ).arg( locale_string ); if (translator.load(filename, "app/native/qm")) { app.installTranslator( &translator ); } BatteryInfo batteryInfo; const char *uri = "bb.cascades.advertisement"; qmlRegisterType ("Flashlight", 1, 0, "Flashlight"); // Every application is required to have its own unique UUID. You should // keep using the same UUID when you release a new version of your application. //TODO: YOU MUST CHANGE THIS UUID! // You can generate one here: http://www.guidgenerator.com/ const QUuid uuid(QLatin1String("c4e27f7c-f9d2-40dc-8630-1d037a0a1309")); //Setup BBM registration handler RegistrationHandler *registrationHandler = new RegistrationHandler(uuid, &app); //AppName.cpp file which contains your main.qml file MobileMarcossit *mobileMarcossit = new MobileMarcossit(registrationHandler->context(), &app); // Whenever the registration has finished successfully, we continue to the main UI // Added finishRegistration() to registrationFinished() // This is to emit signal and by pass use of continue button as shown in sample QObject::connect(registrationHandler, SIGNAL(registered()), mobileMarcossit, SLOT(show())); // we complete the transaction started in the app constructor and start the client event loop here return Application::exec(); // when loop is exited the Application deletes the scene which deletes all its children (per qt rules for children) } It's my MarcossitMobile10.cpp
// Default empty project template #include "MarcossitMobile10.hpp" #include
#include #include #include using namespace bb::cascades; MarcossitMobile10::MarcossitMobile10(bb::cascades::Application *app) : QObject(app) { // create scene document from main.qml asset // set parent to created document to ensure it exists for the whole application lifetime QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this); qml->setContextProperty("_battery", &batteryInfo); // create root object for the UI AbstractPane *root = qml->createRootObject (); // set created root object as a scene app->setScene(root); } and get the error in this line that I declare.
qml->setContextProperty("_battery", &batteryInfo);Help...
Organizing in this way PPH, but already now, run nothing comes in my dev alpha application
MarcossitMobile10.hpp
// Default empty project template #ifndef MarcossitMobile10_HPP_ #define MarcossitMobile10_HPP_ #include
#include namespace bb { namespace cascades { class Application; }} /*! * @brief Application pane object * *Use this object to create and init app UI, to create context objects, to register the new meta types etc. */ class MarcossitMobile10 : public QObject { Q_OBJECT public: bb::device::BatteryInfo* batteryInfo; MarcossitMobile10(bb::cascades::Application *app); virtual ~MarcossitMobile10() {} }; #endif /* MarcossitMobile10_HPP_ */ the qml constructor is bateria.qml
/* Copyright (c) 2012 Research In Motion Limited. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ import bb.cascades 1.0 import bb.device 1.0 // Page laying out the visual components Page { Container { layout: DockLayout {} ImageView { horizontalAlignment: HorizontalAlignment.Fill verticalAlignment: VerticalAlignment.Fill imageSource: "asset:///images/bateria/background.png" } Battery { horizontalAlignment: HorizontalAlignment.Center verticalAlignment: VerticalAlignment.Center } Container { horizontalAlignment: HorizontalAlignment.Center verticalAlignment: VerticalAlignment.Bottom bottomPadding: 50 //! [0] Label { id: stateLabel horizontalAlignment: HorizontalAlignment.Center text: { switch (_battery.chargingState) { case BatteryChargingState.Unknown: return qsTr ("Unknown"); break; case BatteryChargingState.NotCharging: return qsTr ("Not Charging"); break; case BatteryChargingState.Charging: return qsTr ("Charging"); break; case BatteryChargingState.Discharging: return qsTr ("Discharging"); break; case BatteryChargingState.Full: return qsTr ("Full"); break; } } textStyle { color: Color.White fontSize: FontSize.XLarge } } //! [0] Label { id: descriptionLabel horizontalAlignment: HorizontalAlignment.Center bottomMargin: 100 text: { switch (_battery.chargingState) { case BatteryChargingState.Unknown: return qsTr ("Something is up with the battery"); break; case BatteryChargingState.NotCharging: return qsTr ("Plugged in, just no charge"); break; case BatteryChargingState.Charging: return qsTr ("Plugged in"); break; case BatteryChargingState.Discharging: return qsTr ("Unplugged and discharging"); break; case BatteryChargingState.Full: return qsTr ("Plugged in, full"); break; } } textStyle { color: Color.Gray fontSize: FontSize.Large } } } } }
and the qml plugin is Battery.qml
/* Copyright (c) 2012 Research In Motion Limited. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ import bb.cascades 1.0 import bb.device 1.0 Container { preferredWidth: 498 preferredHeight: 318 layout: DockLayout {} //! [0] ImageView { id: batteryOutline horizontalAlignment: HorizontalAlignment.Center verticalAlignment: VerticalAlignment.Center imageSource: _battery.chargingState == BatteryChargingState.Unknown ? "asset:///images/bateria/battery_plugged_error.png" : _battery.chargingState == BatteryChargingState.NotCharging ? "asset:///images/bateria/battery_plugged_bad.png" : _battery.chargingState == BatteryChargingState.Charging ? "asset:///images/bateria/battery_plugged.png" : _battery.chargingState == BatteryChargingState.Discharging ? "asset:///images/bateria/battery.png" : _battery.chargingState == BatteryChargingState.Full ? "asset:///images/bateria/battery_plugged.png" : "" } //! [0] //! [1] ImageView { id: loadingLevel horizontalAlignment: HorizontalAlignment.Left verticalAlignment: VerticalAlignment.Center translationX: 75 preferredWidth: _battery.level * 350.0 / 100.0 imageSource: _battery.level <= 10 ? "asset:///images/bateria/fill_red.png" : _battery.level <= 20 ? "asset:///images/bateria/fill_yellow.png" : _battery.level < 100 ? "asset:///images/bateria/fill_grey.png" : "asset:///images/bateria/fill_green.png" } //! [1] ImageView { id: stateIndicator horizontalAlignment: HorizontalAlignment.Center verticalAlignment: VerticalAlignment.Center imageSource: _battery.chargingState == BatteryChargingState.Unknown ? "asset:///images/bateria/exclamation.png" : _battery.chargingState == BatteryChargingState.NotCharging ? "asset:///images/bateria/exlamation.png" : _battery.chargingState == BatteryChargingState.Charging ? "asset:///images/bateria/flash.png" : _battery.chargingState == BatteryChargingState.Discharging ? "" : _battery.chargingState == BatteryChargingState.Full ? "" : "" } }
It will be something else?
qml->setContextProperty("_battery", &batteryInfo);for example
qml->setContextProperty("_bateria", &batteryInfo); or qml->setContextProperty("Battery", &batteryInfo); -
SqlDataAccess has not declared in this scope
Learn how to use SQL statements in the Cascades.
I'm following the example provided in https://developer.blackberry.com/cascades/reference/bb__data__sqldataaccess.html
I copied the code example in my app.cpp and consisted of two instructions include:
#include
#include Here is the code
// create a data model with sorting keys for firstname and lastname GroupDataModel *model = new GroupDataModel(QStringList() << "firstname" << "lastname"); // load the sql data from contacts table SqlDataAccess sda("contacts.db"); QVariant list = sda.execute("select * from contact order by firstname"); // add the data to the model model->insertList(list.value()); // create a ListView control and add the model to the list ListView *listView = new ListView(); listView->setDataModel(model); When I compile I get the following:
../src/app.cpp:21:5: error: 'SqlDataAccess' was not declared in this scope
What I am doing wrong?
Thank you!
SqlDataAccess is located in the bb::data namespace.
Also, need to add the line:
LIBS += -lbbdata
in *.pro in your project file. See here:
https://developer.BlackBerry.com/Cascades/documentation/dev/upgrading/index.html#library
-
setScene not declared in this scope
Im working on the c ++ here Navigation pane:
https://developer.BlackBerry.com/Cascades/documentation/UI/navigation/multiple_screens_stack.html
I get the error:
setScene has not declared in this scope.
Any ideas how to fix?
With the help of beta3.
Hello
You must use following syntax to define the method of application setScrene.
NavigationPane * rootPane = qml-> createRootObject
(); Application::instance()-> setScene (rootPane);
-
InvokeManager has not declared in this scope
Hey guys
How are you today?, hoping you're all going well
I have a weird bug that continues to show the material to what I did for me
I did a class, spicific for invocations to my email, twitter account etc... I took the code from the site blackberry like (copy-past) here and made some changes to of course the actions and targets... I have included all classes in the code that I copied as follows:
#include
#include #include but I get these weird errors:
and it's happening for each class included
and I've linked with the library system LIBS +=-lbbsystem
any help with this?
Thank you very much
Space of names that you use?
NICU namespace bb::system;
or
BB::System:InvokeManager * invokeManager;
-
I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the option ProX1.
Hi Carl,
It seems that you have installed Acrobat XI pro as an upgrade and an upgrade you will need a serial number for a product older Acrobat X, etc. 9:
See, error: "this serial number is not for a product calling it" | Adobe Creative Suite
Also, I checked with your Adobe ID on the forums and I can only locate XI of Acrobat pro upgrade recorded, please check if you have registered an earlier version of Acrobat on some another email to get this serial number.
Let us know if that helps.
Kind regards
Sandrine Bani
-
LPX-00234: Namespace prefix 'xbrli' is not declared
Hello
with this request
Select updateXML
(
XmlType ("< xbrli:period > < xbrli:StartDate > 1 < / xbrli:StartDate > < xbrli:EndDate > 3 < / xbrli:EndDate > < / xbrli:period > '").
' / xbrli:period / xbrli:StartDate / text () ', 6,' / xbrli:period / xbrli:EndDate / text () ', 7
)
of the double
I becam this error
LPX-00234: Namespace prefix 'xbrli' is not declared
What should I do to fix this error
MDK.Hello
You try to build an invalid XML.
The namespace prefix must be declared within a top-level element (or at least in the first qualified element):Then, with updateXML, you will need to specify the mapping of namespace:
SQL> select xmlserialize(document 2 updateXML 3 ( 4 xmltype('5 ') 10 , '/root/xbrli:period/xbrli:StartDate/text()', 6 11 , '/root/xbrli:period/xbrli:EndDate/text()', 7 12 , 'xmlns:xbrli="some-namespace-uri"' 13 ) 14 as clob indent 15 ) result 16 from dual; RESULT -------------------------------------------------------------------------------- -
Toast not declared in the scope
Hello
I am going through the updated documentation and having problems of implementation of the toast.
void App::showToast() { toast = new SystemToast(this); toast->setBody("Welcome to the BlackBerry 10 Cascades documentation!" + "You have lots of space, but your text will wrap around in the dialog box."); toast->show(); }Returns an error: "toast not declared in the scope" on this line:
toast = new SystemToast(this);
I've added all these header files to my name .cpp
#include
#include #include #include #include #include #include #include #include #include #include #include using namespace bb::cascades; using namespace bb::system; My .pro includes these:
LIBS += -lbbdata -lbbsystem
My header app.hpp file looks like this
// List with context menu project template #ifndef App_HPP_ #define App_HPP_ #include
namespace bb { namespace cascades { class Application; }} /*! * @brief Application pane object * *Use this object to create and init app UI, to create context objects, to register the new meta types etc. */ class App : public QObject { Q_OBJECT public: App(bb::cascades::Application *app); virtual ~App() {} void showToast(); }; #endif /* App_HPP_ */ Have a blast to find out why its not working. Anyone of you has a working example that connects everything to display a simple toast?
Thank you
I guess you missed the variable declaration.
Declare an SystemToast object in the method itself or in app.hpp like this:
SystemToast *toast;
Kind regards
Nishant Shah
-
Gdiplus.dll error, point of entry DllRegisterServer was not found. This file cannot be saved
Hello
I have a HP laptop Compaq Presario R3000 running XP sp2.
While trying to install software for my new HP laserjet printer 451color, I couldn't finish because my computer seems to have a problem with the file gdiplus.dll. After a regsvr32 in the "Run" dialog box, I get the following message: "gdiplus.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. " This problem MAY occur in the past, while the installation of other software or printer, I don't remember, but I CAN get frustrated with it and simply ignored and passed without being able to use everything I tried to add. (I get so tired things does not in the way they are supposed to!)I've updated to SP3, which did not help. I am considering a system recovery. I don't want to lose all my programs, drivers, etc.. I did a search and read as a:
«Startup Repair replace only damaged or missing Windows startup files.» In a Windows XP repair install, Windows all files are replaced no matter whether or not they wish to. Note: If you use a disk to restore your computer manufacturer instead of an installation disc of original Windows download, a Startup Repair or repair install as stated in the above linked guides would not be possible. »
I don't want to click on the wrong thing and screw this place! Can anyone tell me if these a repair overwrite of the windows file system is an option with the operating system microsoft windows xp home sp1 disk?
Is there a better way to solve this problem?
Any help is appreciated.
Thanks, Jeffjeffbrom,
While this article is not about the issue that you are experiencing it however has a patch to replace a bad file gdiplus.dll. Give the patch a whirlwind (it should replace and properly record) and I would like to know the results:
http://support.HP.com/us-en/document/c00615478
Good luck!
-
Serial number you provided is valid, but a qualification was not found on this computer
I want to install again the cs6 Adobe Production Premium that I have, but when I enter my password, it says ' serial number you provided is valid, but a qualification was not found on this computer. Another user has had this problem but it was resolved to privatly. How can I use my software?
You try to install the upgrade from Production Premium CS6 version that requires a previous version of this production.
Fortunately, you have the production premium CS5 full version also bought & registered.
You must install this ir resrespective serial number because it is installed on this system or not.
You can get the serial number in your account from www.adobe.com.
Concerning
Baudier
-
Help debugging: / pls/apex/f requested URL was not found on this server.
Hi - unfortunately, I was on a hiatus APEX 7 months; I'm a little rusty.
I'm going back to the application, I was working on that and get some behaviors
that I don't remember. (Doesn't mean it wasn't there...)
There is a page in my application (a report page) that once I sail
for her, an attempt to access any other page in the application (for example to sort the results,
results go back to the page where the query specs are entered, change a line):
The/pls/apex/f requested URL was not found on this server.
The generated url look completely valid and identical, with the exception of the page number,
for those that are generated by another similar set of pages. Session state protection is
disabled.
Ideas?
Thank you
CarolCarol,
If you can isolate it on a single page, say the login page after the termination, then you must disable a component on this page both (start with areas) until the problem no longer occurs. Also check the level of the application of the process of calculations and the authorisation schemes.
It could be a problem with a value of source element / default or a query LOV too.
Scott
-
ARMv6 (experimental) was not found on this server.
After clicking on the link for ARMv6 (experimental) download, I get:
Not foundThe requested URL /pub/mozilla.org/mobile/nightly/latest-mozilla-central-android-armv6/fennec-16.0a1.en-US.android-arm-armv6.apk was not found on this server.
http://FTP.Mozilla.org/pub/mozilla.org/Mobile/nightly/latest-Mozilla-Central-Android-ARMv6/Fennec-17.0A1.en-us.Android-arm-ARMv6.APK works for me as of today.
Maybe you are looking for
-
No Satellite Pro S300-121 no webcam
I did a clean install of win7 ultimate 32 bit, when I had xp on the left side of the screen id get a webpanel open now I get nothing while in features, it shows chicony usb
-
Each cycle of operation of 5 I get error 50405
Dear, I am trying to solve this problem for the last month, it make me crazy every day.I posted the same post ago last month and I got the answer from the experts OR, that its the problem of leting the vi running for only 5 cycle (previously showed o
-
Why is what I'm stuck with a program that I paid for?
Forgive my mug shot, but I'm frustrated and tired of having to spend money I don't have to replace products that, as always do what I need to do.I bought a copy of Microsoft Money Plus Deluxe in 2007. I never used to access the internet features, nev
-
OfficeJet 4634: "incompatible cartridge".
Hello I've had my printer for about a month. I only use HP 301 cartridges authentic when replace (just once) I came to replace again today and the Canadiens isfine, but it will not accept the B & W cartridge. I cleaned the contacts as described, bo
-
System fan failed error after the Swap case
Hi, I read a number of similar positions on this issue but has not managed to solve my particular problem and was hoping someone can provide additional guidance I recently moved my HP Pavilion Slimline S5280t with a Cooler Master case, everything is