'DAQmxReserveNetworkDevice' was not declared in this scope

Hey guys. I have a problem with this function. I have already included NIDAQmx.h in my aplication c ++ and the functions of this header works. However, I was checking and "DAQmxReserveNetworkDevice" was not included in the header, identical to DAQmxAddNetworkDevice. How to use these functions in my application c ++ then?

I got it. I just added the function in the NIDAQmx.h, so now I'm able to use the service. I write in attachments of the header file where everyone needs

Tags: NI Software

Similar Questions

error "Ibsta" no was not declared in this scope

I have a "error: 'Ibsta' was not declared in this scope."

I try to program with C++ and GPIB test equipments, but so far, I have this problem.

I'm sorry, but my knowledge of C++ is very limited because I took a module on it for about 4 months in College and now I have to rectify emergency for my project. Any help would be much apprciated, I tried searching the forums, but I still have to find an answer. I think it has something to do with my linker. BTW, I use Code blocks to compile program, so it may be different from other IDEs posted here such as Microsoft Visual C++, Borland, Dev C++.

The program that I write to you is as follows:

#include
#include "ni488.h".
#include
#include
#include "Decl. - 32.h"
#include

using namespace std;

void GpibError (const char * msg); / * Function to Error statement * /.

Device int = 0; / * Peripheral device descriptor * /.
int BoardIndex = 0; / * Interface index (GPIB0 = 0, GPIB1 = 1, etc..) * /.

int main() {}
int PrimaryAddress = 28; / * Main unit address * /.
int SecondaryAddress = 0; / * Secondary unit address * /.
char Buffer [101]; / * Read buffer * /.

/*****************************************************************************
* Boot - made only once at the beginning of your application.
*****************************************************************************/

Device = ibdev (/ * create a device descriptor pointer * /)
BoardIndex, / * Board Index (GPIB0 = 0, GPIB1 = 1,...) * /.
PrimaryAddress, / * address of the primary device * /.
SecondaryAddress, / * peripheral secondary address * /.
T10s, / * delay (T10s = 10 seconds) option * /.
1, / * line EOI assert at the end of writing * /.
(0); / * Mode of termination EOS * /.
If (Ibsta() & ERR) {/ * find GPIB error * /}
GpibError ("ibdev Error");
}

ibclr (Device); / * System * /.
If {(Ibsta() & ERR)
GpibError ("ibclr Error");
}

/*****************************************************************************
* Body - writing the majority of your GPIB application code here.
*****************************************************************************/

ibwrt (device, "* IDN?", 5 "); / * Send the command ID of the query * /.
If {(Ibsta() & ERR)
GpibError ("ibwrt Error");
}

Bird (device, buffer, 100); / * Read up to 100 bytes of the device * /.
If {(Ibsta() & ERR)
GpibError ("Bird error");
}

Buffer [Ibcnt ()] = '\0 '; / * Null terminate the string ASCII * /.

printf ("%s\n", buffer); / * Print the device identification * /.

/*****************************************************************************
* UN-initialize - done only once at the end of your application.
*****************************************************************************/

ibonl (device, 0); / * Turn off the line * /.
If {(Ibsta() & ERR)
GpibError ("ibonl Error");
}

}

/*****************************************************************************
* Function GPIBERROR
* This function will warn you that a function of NOR-488 failed by
* a print error message. The State IBSTA variable will also be
* printed in hexadecimal with the senses mnemonic of the forest
* position. The State IBERR variable will be printed in decimal form
* with the mnemonic significance of the decimal value. The status
* Variable IBCNT will be printed in decimal form.
*
* The NOR-488 IBONL function is called to turn off the equipment and
* software.
*
OUTPUT Comptrollership will end this program.
*****************************************************************************/
void GpibError (const char * msg) {}

printf ("%s\n", msg);

printf ("Ibsta () = 0 x %x<",>
If (Ibsta() & ERR) printf ("ERR");
If (Ibsta() & TIMO) printf ("TIMO");
If (Ibsta() & END) printf ("END");
If (Ibsta() & SRQI) printf ("SRQI");
If (Ibsta() & RQS) printf ("QR");
If (Ibsta() & CMPL) printf ("CMPL");
If (Ibsta() & LOK) printf ("LOK");
If (Ibsta() & REM) printf ("REM");
If (Ibsta() & CIC) printf ("CIC");
If (Ibsta() & ATN) printf ("ATN");
If (Ibsta() & TAC) printf ("TAC");
If (Ibsta() & MFP) printf ("LAKES");
If (Ibsta() & CDI) printf ("CDI");
If (Ibsta() & DCAS) printf ("DCAS");
printf ("" > \n ");

printf ("Iberr() = %d", Iberr() ");
If (Iberr() == EDVR) printf ("EDVR \n");
If (Iberr() == ECIC) printf ("in ECIC \n");
If (Iberr() == ENOL) printf ("ENOL \n");
If (Iberr() == EADR) printf ("EADR
\n");

If (Iberr() == HELLO) printf ("the GRAE \n");
If (Iberr() == ESAC) printf ("ALD \n");
If (Iberr() == EABO) printf ("EABO \n");
If (Iberr() == ENEB) printf ("ENEB \n");
If (Iberr() == PAES) printf ("PAES \n");
If (Iberr() == ECAP) printf ("ECAP \n");
If (Iberr() == EFSO) printf ("EFSO \n");
If (Iberr() == USBE) printf ("USBE \n");
If (Iberr() == ESTB) printf ("ESTB \n");
If (Iberr() == ESRQ) printf ("ESRQ \n");
If (Iberr() == XTAB) printf ("Established\n");
If (Iberr() == ELCK) printf ("ELCK \n");
If (Iberr() == MART) printf ("MART \n");
If (Iberr() == EHDL) printf ("EHDL \n");
If (Iberr() == EWIP) printf ("EWIP \n");
If (Iberr() == ERST) printf ("ERST \n");
If (Iberr() == EPWR) printf ("EPWR \n");

printf ("Ibcnt () = %u\n", Ibcnt() ");
printf ("\n");

/ * Call the ibonl to get the device and interface offline * /.
ibonl (device, 0);

"exit" (1);
}

The program I had is a sample I found the Instrument National software called GPIB Explorer.

error: 'QmlDocument' was not declared in this scope

I followed along the following:

https://developer.BlackBerry.com/Cascades/documentation/UI/integrating_cpp_qml/index.html

And added the following code to main.cpp:
```
#include 
#include 

#include "app.hpp"

using ::bb::cascades::Application;

int main(int argc, char **argv)
{
    Application app(argc, argv);

    QmlDocument *qml = QmlDocument::create("main.qml");
    AbstractPane *root = qml->createRootNode();
    Application::setScene(root);

    return Application::exec();
}
```
When compiling, I get the error:
```
error: 'QmlDocument' was not declared in this scope
```
Your weird namespace.

using bb::cascades;

Try this.

Edit: Also if I were you I wouldn't want to create a new project and select HelloCasades as a model. That will be running a lot faster than to try to do it from scratch.

another namespace issue? 'CameraSettings' was not declared in this scope

I have a camera native c ++ application coded and run successfully.

I want to change the flash mode. So I add:
```
CameraSettings* cameraSettings = new CameraSettings();
 cameraSettings->setFlashMode(CameraFlashMode::Light);
 camera->applySettings(cameraSettings);
```
I also add:
```
#include 
#include 
```
When I build, I get the error:

'CameraSettings' was not declared in this scope.

Is it a matter of namespace or a:
```
LIBS += ?
```
... question?

Something else?

My current LIBS:
```
LIBS += -lcamapi -lscreen
```
I see what is happening, I mix with QT c functions.

I need to use the settings as shown in this example:

http://supportforums.BlackBerry.com/T5/native-development/Flash-always-on-camera/m-p/1911403/HIGHLIG...

Thanks for your help.

Error "batteryInfo" has not declared in this scope

Hi, I have this error in my project, I understand the example of the battery of the sample, but I get the error of generation.

'MarcossitMobile10::MarcossitMobile10(bb::cascades::Application*)':
../src/MarcossitMobile10.cpp:17:42: error: 'batteryInfo' was not declared in this scope
cc: C:/bbndk/host_10_0_9_404/win32/x86/usr/lib/gcc/arm-unknown-nto-qnx8.0.0eabi/4.6.3/cc1plus caught signal 1
make[2]: *** [o.le-v7-g/.obj/MarcossitMobile10.o] Error 1
make[2]: Leaving directory `C:/Users/marcossit/ndk-10.0.9-workspace/MarcossitMobile10/arm'
make[1]: *** [debug] Error 2
make[1]: Leaving directory `C:/Users/marcossit/ndk-10.0.9-workspace/MarcossitMobile10/arm'
make: *** [Device-Debug] Error 2

**** Build Finished ****

I don't understand this part I declare scope

This is the main.cpp Batterysample

/* Copyright (c) 2012 Research In Motion Limited.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/

#include 
#include 
#include 
#include 

#include 
#include 

using namespace bb::cascades;
using namespace bb::device;

/**
 * This sample application shows some basic
 * usage of the BatteryInfo API, such as charging level and charging state.
 */
Q_DECL_EXPORT int main(int argc, char **argv)
{
    qmlRegisterUncreatableType("bb.device", 1, 0, "BatteryChargingState", "");

    Application app(argc, argv);

    QTranslator translator;
    const QString locale_string = QLocale().name();
    const QString filename = QString("batterysample_%1").arg(locale_string);
    if (translator.load(filename, "app/native/qm")) {
        app.installTranslator(&translator);
    }

//! [0]
    // Create the battery info object
    BatteryInfo batteryInfo;

    // Load the UI description from main.qml
    QmlDocument *qml = QmlDocument::create("asset:///main.qml");

    // Make the BatteryInfo object available to the UI as context property
    qml->setContextProperty("_battery", &batteryInfo);
//! [0]

    // Create the application scene
    AbstractPane *appPage = qml->createRootObject();
    Application::instance()->setScene(appPage);

    return Application::exec();
}

It's my main.cpp

/*
* Copyright (c) 2012 Jason I. Carter
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Flashlight.hpp"
#include 
#include 
#include 
#include 

#include 
#include 
#include 
#include "MobileMarcossit.hpp"
#include "RegistrationHandler.hpp"
#include "InviteToDownload.hpp"
#include 

using namespace bb::cascades;
using namespace bb::cascades::advertisement;

Q_DECL_EXPORT int main(int argc, char **argv)
{
    // this is where the server is started etc
    Application app(argc, argv);

    // localization support
    QTranslator translator;
    QString locale_string = QLocale().name();
    QString filename = QString( "MobileMarcossit_%1" ).arg( locale_string );
    if (translator.load(filename, "app/native/qm")) {
        app.installTranslator( &translator );
    }
    BatteryInfo batteryInfo;
    const char *uri = "bb.cascades.advertisement";
       qmlRegisterType(uri, 1, 0, "Banner");
       qmlRegisterUncreatableType("bb.device", 1, 0, "BatteryChargingState", "");
       qmlRegisterType("Flashlight", 1, 0, "Flashlight");

    // Every application is required to have its own unique UUID. You should
    // keep using the same UUID when you release a new version of your application.
    //TODO:  YOU MUST CHANGE THIS UUID!
    // You can generate one here: http://www.guidgenerator.com/
    const QUuid uuid(QLatin1String("c4e27f7c-f9d2-40dc-8630-1d037a0a1309"));

    //Setup BBM registration handler
    RegistrationHandler *registrationHandler = new RegistrationHandler(uuid, &app);

    //AppName.cpp file which contains your main.qml file
    MobileMarcossit *mobileMarcossit = new MobileMarcossit(registrationHandler->context(), &app);

    // Whenever the registration has finished successfully, we continue to the main UI
    // Added finishRegistration() to registrationFinished()
    // This is to emit signal and by pass use of continue button as shown in sample
    QObject::connect(registrationHandler, SIGNAL(registered()), mobileMarcossit, SLOT(show()));

    // we complete the transaction started in the app constructor and start the client event loop here
    return Application::exec();
    // when loop is exited the Application deletes the scene which deletes all its children (per qt rules for children)
}

It's my MarcossitMobile10.cpp

// Default empty project template
#include "MarcossitMobile10.hpp"

#include 
#include 
#include 
#include 
using namespace bb::cascades;

MarcossitMobile10::MarcossitMobile10(bb::cascades::Application *app)
: QObject(app)
{

         // create scene document from main.qml asset
    // set parent to created document to ensure it exists for the whole application lifetime
    QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
    qml->setContextProperty("_battery", &batteryInfo);
    // create root object for the UI
    AbstractPane *root = qml->createRootObject();

    // set created root object as a scene
    app->setScene(root);
}

and get the error in this line that I declare.

 qml->setContextProperty("_battery", &batteryInfo);

Help...

Organizing in this way PPH, but already now, run nothing comes in my dev alpha application

MarcossitMobile10.hpp

// Default empty project template
#ifndef MarcossitMobile10_HPP_
#define MarcossitMobile10_HPP_

#include 

#include 
namespace bb { namespace cascades { class Application; }}

/*!
 * @brief Application pane object
 *
 *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
 */
class MarcossitMobile10 : public QObject
{
    Q_OBJECT
public:
    bb::device::BatteryInfo* batteryInfo;
    MarcossitMobile10(bb::cascades::Application *app);
    virtual ~MarcossitMobile10() {}
};

#endif /* MarcossitMobile10_HPP_ */

the qml constructor is bateria.qml

/* Copyright (c) 2012 Research In Motion Limited.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/

import bb.cascades 1.0
import bb.device 1.0

// Page laying out the visual components
Page {
    Container {
        layout: DockLayout {}

        ImageView {
            horizontalAlignment: HorizontalAlignment.Fill
            verticalAlignment: VerticalAlignment.Fill

            imageSource: "asset:///images/bateria/background.png"
        }

        Battery {
            horizontalAlignment: HorizontalAlignment.Center
            verticalAlignment: VerticalAlignment.Center
        }

        Container {
            horizontalAlignment: HorizontalAlignment.Center
            verticalAlignment: VerticalAlignment.Bottom

            bottomPadding: 50

            //! [0]
            Label {
                id: stateLabel

                horizontalAlignment: HorizontalAlignment.Center

                text: {
                    switch (_battery.chargingState) {
                        case BatteryChargingState.Unknown:
                            return qsTr ("Unknown");
                            break;
                        case BatteryChargingState.NotCharging:
                            return qsTr ("Not Charging");
                            break;
                        case BatteryChargingState.Charging:
                            return qsTr ("Charging");
                            break;
                        case BatteryChargingState.Discharging:
                            return qsTr ("Discharging");
                            break;
                        case BatteryChargingState.Full:
                            return qsTr ("Full");
                            break;
                    }
                }
                textStyle {
                    color: Color.White
                    fontSize: FontSize.XLarge
                }
            }
            //! [0]

            Label {
                id: descriptionLabel

                horizontalAlignment: HorizontalAlignment.Center
                bottomMargin: 100

                text: {
                    switch (_battery.chargingState) {
                        case BatteryChargingState.Unknown:
                            return qsTr ("Something is up with the battery");
                            break;
                        case BatteryChargingState.NotCharging:
                            return qsTr ("Plugged in, just no charge");
                            break;
                        case BatteryChargingState.Charging:
                            return qsTr ("Plugged in");
                            break;
                        case BatteryChargingState.Discharging:
                            return qsTr ("Unplugged and discharging");
                            break;
                        case BatteryChargingState.Full:
                            return qsTr ("Plugged in, full");
                            break;
                    }
                }
                textStyle {
                    color: Color.Gray
                    fontSize: FontSize.Large
                }
            }
        }
    }
}

and the qml plugin is Battery.qml

/* Copyright (c) 2012 Research In Motion Limited.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/

import bb.cascades 1.0
import bb.device 1.0

Container {
    preferredWidth: 498
    preferredHeight: 318

    layout: DockLayout {}

    //! [0]
    ImageView {
        id: batteryOutline

        horizontalAlignment: HorizontalAlignment.Center
        verticalAlignment: VerticalAlignment.Center

        imageSource: _battery.chargingState == BatteryChargingState.Unknown ? "asset:///images/bateria/battery_plugged_error.png" :
                     _battery.chargingState == BatteryChargingState.NotCharging ? "asset:///images/bateria/battery_plugged_bad.png" :
                     _battery.chargingState == BatteryChargingState.Charging ? "asset:///images/bateria/battery_plugged.png" :
                     _battery.chargingState == BatteryChargingState.Discharging ? "asset:///images/bateria/battery.png" :
                     _battery.chargingState == BatteryChargingState.Full ? "asset:///images/bateria/battery_plugged.png" : ""
    }
    //! [0]

    //! [1]
    ImageView {
        id: loadingLevel

        horizontalAlignment: HorizontalAlignment.Left
        verticalAlignment: VerticalAlignment.Center

        translationX: 75
        preferredWidth: _battery.level * 350.0 / 100.0

        imageSource: _battery.level <= 10 ? "asset:///images/bateria/fill_red.png" :
                     _battery.level <= 20 ? "asset:///images/bateria/fill_yellow.png" :
                     _battery.level < 100 ? "asset:///images/bateria/fill_grey.png" : "asset:///images/bateria/fill_green.png"
    }
    //! [1]

    ImageView {
        id: stateIndicator

        horizontalAlignment: HorizontalAlignment.Center
        verticalAlignment: VerticalAlignment.Center

        imageSource: _battery.chargingState == BatteryChargingState.Unknown ? "asset:///images/bateria/exclamation.png" :
                     _battery.chargingState == BatteryChargingState.NotCharging ? "asset:///images/bateria/exlamation.png" :
                     _battery.chargingState == BatteryChargingState.Charging ? "asset:///images/bateria/flash.png" :
                     _battery.chargingState == BatteryChargingState.Discharging ? "" :
                     _battery.chargingState == BatteryChargingState.Full ? "" : ""
    }
}

It will be something else?

qml->setContextProperty("_battery", &batteryInfo);

for example

qml->setContextProperty("_bateria", &batteryInfo);

or

qml->setContextProperty("Battery", &batteryInfo);

SqlDataAccess has not declared in this scope

Learn how to use SQL statements in the Cascades.

I'm following the example provided in https://developer.blackberry.com/cascades/reference/bb__data__sqldataaccess.html

I copied the code example in my app.cpp and consisted of two instructions include:

#include 
#include

Here is the code

// create a data model with sorting keys for firstname and lastname
GroupDataModel *model =
  new GroupDataModel(QStringList() << "firstname" << "lastname");

// load the sql data from contacts table
SqlDataAccess sda("contacts.db");
QVariant list = sda.execute("select * from contact order by firstname");

// add the data to the model
model->insertList(list.value());

// create a ListView control and add the model to the list
ListView *listView = new ListView();
listView->setDataModel(model);

When I compile I get the following:

../src/app.cpp:21:5: error: 'SqlDataAccess' was not declared in this scope

What I am doing wrong?

Thank you!

SqlDataAccess is located in the bb::data namespace.

Also, need to add the line:

LIBS += -lbbdata

in *.pro in your project file. See here:

https://developer.BlackBerry.com/Cascades/documentation/dev/upgrading/index.html#library

setScene not declared in this scope

Im working on the c ++ here Navigation pane:

https://developer.BlackBerry.com/Cascades/documentation/UI/navigation/multiple_screens_stack.html

I get the error:

setScene has not declared in this scope.

Any ideas how to fix?

With the help of beta3.

Hello

You must use following syntax to define the method of application setScrene.

NavigationPane * rootPane = qml-> createRootObject();

Application::instance()-> setScene (rootPane);

InvokeManager has not declared in this scope

Hey guys

How are you today?, hoping you're all going well

I have a weird bug that continues to show the material to what I did for me

I did a class, spicific for invocations to my email, twitter account etc... I took the code from the site blackberry like (copy-past) here and made some changes to of course the actions and targets... I have included all classes in the code that I copied as follows:
```
#include 
#include 
#include 
```
but I get these weird errors:

and it's happening for each class included

and I've linked with the library system LIBS +=-lbbsystem

any help with this?

Thank you very much

Space of names that you use?

NICU namespace bb::system;

or

BB::System:InvokeManager * invokeManager;

Toast not declared in the scope

Hello

I am going through the updated documentation and having problems of implementation of the toast.

void App::showToast() {
    toast = new SystemToast(this);
    toast->setBody("Welcome to the BlackBerry 10 Cascades documentation!" + "You have lots of space, but your text will wrap around in the dialog box.");
    toast->show();
}

Returns an error: "toast not declared in the scope" on this line:

toast = new SystemToast(this);

I've added all these header files to my name .cpp

#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 
#include 

using namespace bb::cascades;
using namespace bb::system;

My .pro includes these:

LIBS   += -lbbdata -lbbsystem

My header app.hpp file looks like this

// List with context menu project template
#ifndef App_HPP_
#define App_HPP_

#include 

namespace bb { namespace cascades { class Application; }}

/*!
 * @brief Application pane object
 *
 *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
 */
class App : public QObject
{
    Q_OBJECT
public:
    App(bb::cascades::Application *app);
    virtual ~App() {}
    void showToast();
};

#endif /* App_HPP_ */

Have a blast to find out why its not working. Anyone of you has a working example that connects everything to display a simple toast?

Thank you

I guess you missed the variable declaration.

Declare an SystemToast object in the method itself or in app.hpp like this:

SystemToast *toast;

Kind regards

Nishant Shah

ARMv6 (experimental) was not found on this server.

After clicking on the link for ARMv6 (experimental) download, I get:
Not found

The requested URL /pub/mozilla.org/mobile/nightly/latest-mozilla-central-android-armv6/fennec-16.0a1.en-US.android-arm-armv6.apk was not found on this server.

http://FTP.Mozilla.org/pub/mozilla.org/Mobile/nightly/latest-Mozilla-Central-Android-ARMv6/Fennec-17.0A1.en-us.Android-arm-ARMv6.APK works for me as of today.

When I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system."

Tablet not working help please
OK so I have a tablet that I use to draw for my photoshop... it worked perfectly fine but when I tried after months of non-use, it won't work. and when I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system." I know that it worked because I installed it but now it's just dosnt work... Please help me because I want to draw again.

Hi LoverofDrawing,

I suggest you reinstall the drivers for the tablet on the computer by visiting the manufacturer of the Tablet and check if it helps.

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

An error occurred when trying to share < folder name >. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time

Original title: sharing folder error

How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share . There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. »

Hello

Were there any changes made on the computer before the show?

I suggest to see the link and try to run the Troubleshooter:

Share files with anyone

http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

See also:

File sharing essentials

http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

Serial number you provided is valid, but calling it a product was not found on this computer

I try to install LR6. I have a valid serial number, but during the install process, I get the following: serial number you provided is valid, but calling it a product was not found on this computer.
Duh! It's because I'm trying to install it on this computer! How should I proceed from here? I have a HP Pavilion laptop with Windows 10. I LR6 installed on my other computer, which is a desktop HP Pavilion on Windows 7, and now I want to install it on my Lap Top. Can someone explain what is happening here and how to fix?

you will need serial number of your previous version. There is no work around.

There may be ways to recover serial number depending on whether lr5 is currently installed on a computer (old) or you bought lr5 where saved from adobe.

Validation problem: Lightroom 6 ' serial number provided is valid, but calling it a product was not found on this computer.

I downloaded and installed 6 Lightroom to my new computer. It will not be validated.
I get a message "Serial number provided is valid, but calling it a product was not found on this computer.

You have entered a serial number update for version 6.

To verify that you qualify to use the serial number upgrade, Setup Lightroom 6 tried hard disk for a previous version of Lightroom installed.

Because he could not find a previous version, it is now asking you to enter the serial number from a previous version (version 5 or earlier) so that you version 6 update serial number can be accepted.

Gdiplus.dll error, point of entry DllRegisterServer was not found. This file cannot be saved

Hello
I have a HP laptop Compaq Presario R3000 running XP sp2.
While trying to install software for my new HP laserjet printer 451color, I couldn't finish because my computer seems to have a problem with the file gdiplus.dll. After a regsvr32 in the "Run" dialog box, I get the following message: "gdiplus.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. " This problem MAY occur in the past, while the installation of other software or printer, I don't remember, but I CAN get frustrated with it and simply ignored and passed without being able to use everything I tried to add. (I get so tired things does not in the way they are supposed to!)

I've updated to SP3, which did not help. I am considering a system recovery. I don't want to lose all my programs, drivers, etc.. I did a search and read as a:
«Startup Repair replace only damaged or missing Windows startup files.» In a Windows XP repair install, Windows all files are replaced no matter whether or not they wish to. Note: If you use a disk to restore your computer manufacturer instead of an installation disc of original Windows download, a Startup Repair or repair install as stated in the above linked guides would not be possible. »
I don't want to click on the wrong thing and screw this place! Can anyone tell me if these a repair overwrite of the windows file system is an option with the operating system microsoft windows xp home sp1 disk?
Is there a better way to solve this problem?
Any help is appreciated.
Thanks, Jeff

jeffbrom,

While this article is not about the issue that you are experiencing it however has a patch to replace a bad file gdiplus.dll. Give the patch a whirlwind (it should replace and properly record) and I would like to know the results:

http://support.HP.com/us-en/document/c00615478

Good luck!

'DAQmxReserveNetworkDevice' was not declared in this scope

Similar Questions

Maybe you are looking for