Another post "this set of operation will be OK for CS5.5?

This again is another question "is the computer I want to be good enough for CS5.5." Before I ask you to please forgive my ignorance and the length of this post. I am new to having to worry about hardware. In the past any decent PC meets my needs, but I find that this is the case I now need to edit video.

So I'll start with my special needs. I need portability. I am a student and directing a summer camp. In my role at the camp, I identified the need to improve our hardware promotional camp, and that's where video editing comes into play. I will be filming and editing of several short promotional films and a couple of short documentary style using DSLR footage and perhaps a small camcorder or two. After much research and play with some free trial software, I have it set on CS5.5, but there is that one problem, my computer is not up to the task. Conveniently enough, my current computer has seen better days, and it's time to spend anyway, so I was searching and shopping around trying to find a suitable computer. That portability is a must and I can't afford a decent desktop and a laptop (and even if I could it would be boring data transfer back), I've been looking at laptops. It seems that any mobile off - the shelf that is well suited to run adobe isn't really all that portable. Of course, you can carry it much easier that a computer desk, but you can't expect to get a full day in the life of the battery out of it, are not a reasonable weight to carry around the creation (my point is that a computer 17 "laptop is out). I did some digging, and after reading a lot of posts on this forum and a lot of information from other sources, I think I came up with a solution. I am looking for admission in any people of enthusiasts see potential problems with my idea, and for dell sales representatives are not tech savvy, so I thought it was a good place to discover how well adobe would go on my set - up proposed (I'm not a pro and won't be of feature films (, edition, so I don't think that I need the same performance that your desktop wearing I have just need to perform well with as few hold ups as possible).

Here's what I came with:

Dell XPS 14z:

Intel core i-7 2640 M (2.8 GHz, with "turbo boost" up to 3.50 GHz)
8 GB Dual Channel DDR3 SDRAM
750 GB SATA, HDD 7200 RPM
NVIDIA Geforce 520 M 1 GB graphics card
The only information about the screen resolution I could find on the site web of Dell were "true 720 p HD display" after reading a few reviews, I found the specs are lower that the minimum recommended by Adobe, I forget exactly what they are.

If this computer is no longer that I never needed for my needs no video editing. On paper, it's a nice small laptop, a little expensive ($1300!), but they can be had at a very reasonable price ($700 - $800) refurbished Dell online workshop. None-the-less, I see several problems with this configuration.

First is the screen: it is not enough. Which is easily solved using an external monitor, and you can get a pretty decent screen off tiger direct for less than $200. I can tolerate a video editing at a desk, I need portability to other applications.

Second is the hard drive. Reading this forum, I understand that editing with a single hard disk can slow things down a bit. I was wondering how big a deal it really is for the occasional Editor? There are adapters that allow you to place a second hard drive, where the optical drive is in this laptop. If necessary, I intend to put a second 750 GB 7200 rpm HARD drive where is the optical drive. Problem solved, right? Did anyone see any problem with this idea? My next question on the subject of the hard drive is: how would a third hard drive really benefit me? And data transfer using a with a USB 3.0 external HARD drive connection be fast enough to be a viable option for a third drive? Anyway I could take an appropriate hard drive and caddy for a little less than $175 and $100 for a USB 3.0 external HARD drive to be used as a third drive if necessary.

The third potential problem is the RAM. It seems there are a lot of opinions out there about how much is enough. 8 GB is enough? According to the website of intel, this particular processor is compatible with up to 16 GB of RAM, and after searching the forums I found a few cases of people expand their RAM on this computer to 16 GB with no problems. I understand that I can replace the 2 x 4 GB current implemented with 1x4Go + 1X8GB or 2x8GB to give a total of 12 or 16 GB of RAM. Is it necessary or even beneficial? 8 GB would be more than enough for anything else I do, and since I have some experience with video editing I thought I would ask those who know. Need an upgrade of RAM? By using this configuration, I could update the RAM 12 GB for about $100 and 16 GB for about $200.

Finally, the graphics card that is provided with this computer is not on the list of cards recommended by Adobe. I understand that this is because it only supports CUDA, how much of an issue is it? I'll be able to edit video without recommended card effectively?

The point of all numbers is as follows: 800 + 200 + 175 + 100 = 1, 275. $ 1275ish seems to me that I could get a very reasonable video editing set up which is always portable. It is less than the price of the tile on these laptops and much less than a Mac book pro, which is the world's first recommendation when I mention that I want to use the computer for video editing. This looks like a very reasonable price for a laptop with a processor intel 2.8 GHz i7, two 750 GB 7200 rpm HDD, 12 GB of RAM, and an external monitor when I want to sit and change. Am I delusional thinking it would go well with CS5.5?

So I guess the point is the following. Life is any compromise, since I need portability and I am not a professional (just an anal consumer with high standards :), I am willing to trade a little performance for improved portability of video editing. I want the opinion of those who have experience using CS5.5 with different layouts, my proposed set-up seems like a reasonable compromise? Improvements are still needed? They would be sufficient to provide a reasonable editing experience? All the other tips (not to mention than buying a desktop computer or a computer wicked expensive 17 "laptop which weighs two to three times more expensive and chews through the battery life)?

Thank you for sticking with it and give me any comments. We appreciate it!

Benson,

Trying to stick with your original objectives and I think I can see where you're going, I have some tips and suggestions...

-Since the SLR CAMERAS and camcorders (I guess as ACHDV) are very difficult codecs; I suggest that you consider only Intel QM 32nm processors (i.e. i7 2670QM w / 4 carrots + hyperthreading); Having twice the nuclei is HUGE for CS5/5.5

-Suggest that go with a 14 "display 1600 x 900 for a good compromise between size, weight and cost

-A video installation of nVidia level "gamers" will allow the massively useful EMT be put on (carrots GPU cuda)

-8 GB of RAM will work; of course the 16 GB would allow for faster burns to DVD, but I don't feel that to be a need

-Supports for the conversion of optical Bay NewModeUS are asesome to add a 2.5 "2nd if you need to change on the fly, but since you said you don't need this capability I suggest you get the external drive USB3.0 to 7200 RPM bigger, more formidable, you can plug in when you change. Of course a RAID 0 (disk 2) peripheral USB 3.0 would be even more ideal, but it can also break your budget.

-Dell Alienware M14x meets all of these criteria; Yes, it will be a little heavier. Yes, it will be more expensive. But, more important still, it will get the job done. Any laptop ' thin, light and smooth "and which includes the current more little line of Macbook Pro won't be so IMHO.

Kind regards

Jim

Tags: Premiere

Similar Questions

Cs5 serial number will not work for cs5.5

I have cs5 design creative premuim on my old laptop, but he struggled to run it. Recently I got a new laptop and that you want to put on there, only to find, I have misplaced the disc and tried downlaoding but I can't download cs5 more. I have dowlaoded cs5.5 but my cs5 serial number works help I need to use it as soon as possible and the trial has run out

Cs5 serial number will not work in cs5.5, they are dependent on version.

You can download the cs5 'prodesigntools.com' and then install the software.

Write a DVD or make a backup of the files downloaded for later use.

My system will be sufficient for CS5?

I searched the forums for the answer and can't find anything specific, so my apologies if I repeat an ancient question.
I'm considering the purchase of the Master Collection soon (I am a student and want to get on the discount until I finished College) and I was looking at the specs of the system. I noticed that the NVIDIA GeForce GTS 250 is not mentioned anywhere when it comes to first CS5. Also, I couldn't find much info on my sound card.

I am running dual GTS 250 (512 MB), map its Creative X - Fi Titanium Fatality Pro, 6 GB RAM, 7200 RPM / 500GB HD, Intel Pentium 2.66Ghz processor on an ASUS P6T Deluxe Motherboard i7. The only thing that doesn't look like it has a lot of support for first CS5 is my graphics cards. My system will be able to handle the first?
It's a hell of a lot of money for me, so if anyone has some experience with a multi-system setup similar or has information that can help me, I would very much appreciate it.

A hard drive is not enough... Too bad to read on the http://forums.adobe.com/thread/662972?tstart=0 installation drive

Many codecs, you must not... for some RAID... read you in the hardware section

For a list of supported nVidia CUDA cards see the FAQ
http://forums.Adobe.com/community/premiere/premierepro_current/cs5_faq_sheet

To others, read the card nVidia Hack http://forums.adobe.com/thread/629557?tstart=0

My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to what I built for CS5

Subscription will not work for CS5

Recently, I tried to re - install Photoshop CS5 on my computer and my series is legitimate or accepted, Photoshop leads me to the statements that he cannot start my subscription and will be propmt me once I restart photoshop to start of such subscription. However, when I try to do, it starts the process. What's wrong?

You did not no information system, or none of that, so generic questions activation to something on your system interfere all that we can do is guess autour. In any case, this kind of things is better managed by calling support. Also, check on your account that your subscription is actually still active.

Mylenium

System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

Original title: svchost (1020)

Event type: error
Event source: ESENT
Event category: general
Event ID: 490
Date: 2010-10-19
Time: 14:51:34
User: n/a
Computer: ROB
Description:
Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Hi Robrw,

1. when exactly you receive this error?

2. don't you make changes to the computer before this problem?

You can try to rename the catroot2 folder and check if it helps.

Step 1:

a. Click Start and in run type C:\windows\system32 and click ok

b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

If you are not able to do the normal mode, try to start in safe mode and rename

Check out the link for more information on starting your computer in SafeMode below:

http://support.Microsoft.com/kb/315222

Step 2:

If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

See the following article:

How to capture a file or a folder in Windows XP

http://support.Microsoft.com/kb/308421

Step 3:

You can also try to temporarily disable third-party security software and firewalls and check what is happening.

Note: Activate the security software after the resolution of the problem.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

I have Windows XP and microsoft outlook with FIrefox as my browser. When I try to open a link in an email I get the message following if poster "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system a

I have Windows XP and microsoft outlook with Firefox as my browser. When I try to open a link in an email I get the message following if poster "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.

Download and run the file described here;

http://www.local-it-guy.com/tips/restrictions.html

Then click on "set program access & defaults '-custom option and set Firefox as your default browser.

If I export my contacts from my Windows Mail and import in another computer (same e-mail program), will be replaced existing contacts on this computer?

If I export my contacts from my Windows Mail and import in another computer (same e-mail program), will be replaced existing contacts on this computer?

original title: about Contacts

Hello

Ideally, it should not be replaced.

See also: http://windows.microsoft.com/en-US/windows-vista/Import-export-or-change-the-format-for-contacts

I've just uploaded elements adobe photoshop 13 on a computer vista laptop and realized this isn't compatible.will I can download again on another computer?

I've just uploaded elements adobe photoshop 13 on a computer vista laptop and realized this isn't compatible.will I can download again on another computer?

Yes. It takes a download link if you have purchased from Adobe. You can also find a download to...

PES 10, 11, 12, 13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Windows 7 network connection status sent/received packets in bytes by default. How can I change this setting so that the status is displayed in MBs.

Windows 7 network connection status sent/received packets in bytes by default. How can I change this setting so that the status is displayed in MBs.

Hey Muhammad,

Thanks for posting the query on Microsoft Community.

Design/default it appears in bytes not in MB.

In the future, if you have problems with Windows, get back to us. We will be happy to help you.

After the reduction of volume, I get "selected Operation will convert dynamic disks.

Disk partitioning error

I recently bought a laptop HP with Windows 7 Home Edition Basic, wanted to shrink the C drive to create another partition. However, after the reduction of the volume, I got this error:

Operation you selected will convert dynamic disks. You will not be able to boot the operating system from any other volumes on the disk.

It's because win7 only supports 4 basic primary partitions and your system already has 4.

Don't not procceed in dynamic conversion because it will cause other problems later.

If you do not create the partion when / if you are using the HP recovery disks that will destroy any partition that you created.

If I were you I would like to extend C to use this free space, you created i.e. cancel what you were doing in the shrinking, and then explain the purpose of the planned partition.

You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term.

I get error frequently below. In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had. Instead, I get a page with no messages. I then click on a forum page numbers in the upper right corner. Sometimes brings back me to the page that displays the list of the posts that I had. However, more often I get the below error. So try to navigate from one position to another is desperately slow. You can fix this? Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page? This is a problem that happened before and after the upgrade.
"You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »

Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.

Checked "Empty the Cache on exit" in Firefox 25. Now it hangs at startup. Is there a way to disable this setting apart from Firefox?

Yesterday, I decided to check the 'Clear Cache leaving' parameter. This morning I couldn't start Firefox. It hangs and stays like that. I saw another post somewhere on this same issue. I created a new profile and it worked well. He's just stuck when I try to use my old profile. It doesn't work in either safe mode. Y at - it anyway to disable this option outside of Firefox.

I also tried without downgrading to 24 and upgrade to the beta 26. None worked.

You can check for problems with preferences.

Rename or remove the file prefs.js and numbered possible prefs-# .js and the file user.js to reset all default prefs.
- http://KB.mozillazine.org/Preferences_not_saved
- http://KB.mozillazine.org/Resetting_preferences
You can try to clear the cache manually on the disk.

View topic: cache for the location page.

It is best to avoid using external programs to clean your Firefox data and use integrated means that Firefox instead.

Error events arrives 45 minutes late, where I can configure this setting?

Hello community, we use BBPE 4.3 to monitor our environment. Unfortunately, only error events are sent by my DOWNLOAD 45 minutes late, and then every 15 minutes, not so good.

Looking at the documentation I have seen the bbpagedelay, but with this setting I can only say to the DOWNLOAD how much time waiting for a notification of an error of one individual to another, but where I can configure the pager to send welcome me the first notification instantly?

Hope to be fairly clear in the description of my problem.

Best regards

Gerardo

make the recipient in the file bbwarnrules.cfg like this look?

*;; *;; *;*;*; [email protected]: ~ 45-15

or

*;; *;; *;*;*; [email protected]: ~ 45

If so, change of

*;; *;; *;*;*; [email protected]: 15

or

*;; *;; *;*;*; [email protected]

the ~ XX tells BB to start notifying * only * if the event has been produced for more than XX minutes.

It's the only reason I see for now.

I have to enter several times when idle (every few minutes). How do I change THIS setting?

I have to enter several times when idle (every few minutes). How do I change THIS setting?

Glance under Control Panel - Power Options - change Plan settings - Gina Whipp 2010 Microsoft MVP (access) Please post all responses on the forum where everyone can benefit.

Please help im trying to import pictures from a SD card and get this set up the following files were not imported because it couldn't be read items 1-100 101-200 201-300 itmes points

Please help im trying to import images from the SD card and get this set up the following files were not imported because it couldn't be read items 1-100

"Could not be read" indicates that the Destination Directory has no WRITE permission in your operating system.

To resolve this problem, you must
1. Determine the Destination folder - it's on the right side of your import under Destination dialog box
2. Change permissions in your operating system on this particular file have WRITE permission (or switch the destination to one that has the WRITE permission)

Another post "this set of operation will be OK for CS5.5?

Similar Questions

Maybe you are looking for