My system will be sufficient for CS5?

Similar Questions

• The 460W power supply will be sufficient for the GTX 1070?

  Just place an order for a R5 with an i7, GTX 1070 and a diet of 460W.

  I'm not going for the largest power supply, because I'm not a fan and do not upgrade components.  If the configuration of Dell said 460 page might work, I saw that he needed to upgrade the PSU. I preferred using the extra $100 for the video card rather than the 970-1070.

  Now, reading around forums, I continue to see comments that the recommended food for a GTX 1070 is 600 Watts (by guru3d.com).

  I still have time to cancel the order because it is very recent.  Do I need to worry about this power supply?  How would I know if it is not sufficient for use?  The frame rate would be low, or the stability of the system would show signs?

  Hello

  Yes, the 460W will work well if is unique. Check the image below and let me know if you need anything else:

  

• Another post "this set of operation will be OK for CS5.5?

  This again is another question "is the computer I want to be good enough for CS5.5." Before I ask you to please forgive my ignorance and the length of this post. I am new to having to worry about hardware. In the past any decent PC meets my needs, but I find that this is the case I now need to edit video.

  So I'll start with my special needs. I need portability. I am a student and directing a summer camp. In my role at the camp, I identified the need to improve our hardware promotional camp, and that's where video editing comes into play. I will be filming and editing of several short promotional films and a couple of short documentary style using DSLR footage and perhaps a small camcorder or two. After much research and play with some free trial software, I have it set on CS5.5, but there is that one problem, my computer is not up to the task. Conveniently enough, my current computer has seen better days, and it's time to spend anyway, so I was searching and shopping around trying to find a suitable computer. That portability is a must and I can't afford a decent desktop and a laptop (and even if I could it would be boring data transfer back), I've been looking at laptops. It seems that any mobile off - the shelf that is well suited to run adobe isn't really all that portable. Of course, you can carry it much easier that a computer desk, but you can't expect to get a full day in the life of the battery out of it, are not a reasonable weight to carry around the creation (my point is that a computer 17 "laptop is out). I did some digging, and after reading a lot of posts on this forum and a lot of information from other sources, I think I came up with a solution. I am looking for admission in any people of enthusiasts see potential problems with my idea, and for dell sales representatives are not tech savvy, so I thought it was a good place to discover how well adobe would go on my set - up proposed (I'm not a pro and won't be of feature films (, edition, so I don't think that I need the same performance that your desktop wearing I have just need to perform well with as few hold ups as possible).

  Here's what I came with:

  Dell XPS 14z:

  • Intel core i-7 2640 M (2.8 GHz, with "turbo boost" up to 3.50 GHz)
  • 8 GB Dual Channel DDR3 SDRAM
  • 750 GB SATA, HDD 7200 RPM
  • NVIDIA Geforce 520 M 1 GB graphics card
  • The only information about the screen resolution I could find on the site web of Dell were "true 720 p HD display" after reading a few reviews, I found the specs are lower that the minimum recommended by Adobe, I forget exactly what they are.

  If this computer is no longer that I never needed for my needs no video editing. On paper, it's a nice small laptop, a little expensive ($1300!), but they can be had at a very reasonable price ($700 - $800) refurbished Dell online workshop. None-the-less, I see several problems with this configuration.

  First is the screen: it is not enough. Which is easily solved using an external monitor, and you can get a pretty decent screen off tiger direct for less than $200. I can tolerate a video editing at a desk, I need portability to other applications.

  Second is the hard drive. Reading this forum, I understand that editing with a single hard disk can slow things down a bit. I was wondering how big a deal it really is for the occasional Editor? There are adapters that allow you to place a second hard drive, where the optical drive is in this laptop. If necessary, I intend to put a second 750 GB 7200 rpm HARD drive where is the optical drive. Problem solved, right? Did anyone see any problem with this idea? My next question on the subject of the hard drive is: how would a third hard drive really benefit me? And data transfer using a with a USB 3.0 external HARD drive connection be fast enough to be a viable option for a third drive? Anyway I could take an appropriate hard drive and caddy for a little less than $175 and $100 for a USB 3.0 external HARD drive to be used as a third drive if necessary.

  The third potential problem is the RAM. It seems there are a lot of opinions out there about how much is enough. 8 GB is enough? According to the website of intel, this particular processor is compatible with up to 16 GB of RAM, and after searching the forums I found a few cases of people expand their RAM on this computer to 16 GB with no problems. I understand that I can replace the 2 x 4 GB current implemented with 1x4Go + 1X8GB or 2x8GB to give a total of 12 or 16 GB of RAM. Is it necessary or even beneficial?  8 GB would be more than enough for anything else I do, and since I have some experience with video editing I thought I would ask those who know. Need an upgrade of RAM? By using this configuration, I could update the RAM 12 GB for about $100 and 16 GB for about $200.

  Finally, the graphics card that is provided with this computer is not on the list of cards recommended by Adobe. I understand that this is because it only supports CUDA, how much of an issue is it? I'll be able to edit video without recommended card effectively?

  The point of all numbers is as follows: 800 + 200 + 175 + 100 = 1, 275. $ 1275ish seems to me that I could get a very reasonable video editing set up which is always portable. It is less than the price of the tile on these laptops and much less than a Mac book pro, which is the world's first recommendation when I mention that I want to use the computer for video editing. This looks like a very reasonable price for a laptop with a processor intel 2.8 GHz i7, two 750 GB 7200 rpm HDD, 12 GB of RAM, and an external monitor when I want to sit and change. Am I delusional thinking it would go well with CS5.5?

  So I guess the point is the following. Life is any compromise, since I need portability and I am not a professional (just an anal consumer with high standards :), I am willing to trade a little performance for improved portability of video editing. I want the opinion of those who have experience using CS5.5 with different layouts, my proposed set-up seems like a reasonable compromise? Improvements are still needed? They would be sufficient to provide a reasonable editing experience? All the other tips (not to mention than buying a desktop computer or a computer wicked expensive 17 "laptop which weighs two to three times more expensive and chews through the battery life)?

  Thank you for sticking with it and give me any comments. We appreciate it!

  Benson,

  Trying to stick with your original objectives and I think I can see where you're going, I have some tips and suggestions...

  -Since the SLR CAMERAS and camcorders (I guess as ACHDV) are very difficult codecs; I suggest that you consider only Intel QM 32nm processors (i.e. i7 2670QM w / 4 carrots + hyperthreading); Having twice the nuclei is HUGE for CS5/5.5

  -Suggest that go with a 14 "display 1600 x 900 for a good compromise between size, weight and cost

  -A video installation of nVidia level "gamers" will allow the massively useful EMT be put on (carrots GPU cuda)

  -8 GB of RAM will work; of course the 16 GB would allow for faster burns to DVD, but I don't feel that to be a need

  -Supports for the conversion of optical Bay NewModeUS are asesome to add a 2.5 "2nd if you need to change on the fly, but since you said you don't need this capability I suggest you get the external drive USB3.0 to 7200 RPM bigger, more formidable, you can plug in when you change. Of course a RAID 0 (disk 2) peripheral USB 3.0 would be even more ideal, but it can also break your budget.

  -Dell Alienware M14x meets all of these criteria; Yes, it will be a little heavier. Yes, it will be more expensive. But, more important still, it will get the job done. Any laptop ' thin, light and smooth "and which includes the current more little line of Macbook Pro won't be so IMHO.

  Kind regards

  Jim

• SYSTEM WILL NOT RESPOND FOR 1 MIN AFTER THE CONNECTION

  Once connected to my system after a reboot it will not respond for atlesat 1 minute. I can open some software like firefox... but I can't open Control Panel or modify a system

  Hi mohdrafi,.

  (a) since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

  This problem may occur because of the conflict between the hardware or programs on the computer.

  To refine the question, I suggest you try the following steps:

  Disconnect all external devices, mainly USB devices except for devices such as the mouse and keyboard.

  Check if the problem persists,

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once the test is completed.

  Step 2: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If everything works properly in safe mode, you can deduce that some third-party services are at the origin of the problem.

  Step 3: Put the computer to boot to figure out program causing problem.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  For more information, see the link below:

  What to do if Windows does not start successfully

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  This might interest you:

  5 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cs5 serial number will not work for cs5.5

  I have cs5 design creative premuim on my old laptop, but he struggled to run it. Recently I got a new laptop and that you want to put on there, only to find, I have misplaced the disc and tried downlaoding but I can't download cs5 more. I have dowlaoded cs5.5 but my cs5 serial number works help I need to use it as soon as possible and the trial has run out

  Cs5 serial number will not work in cs5.5, they are dependent on version.

  You can download the cs5 'prodesigntools.com' and then install the software.

  Write a DVD or make a backup of the files downloaded for later use.

• Subscription will not work for CS5

  Recently, I tried to re - install Photoshop CS5 on my computer and my series is legitimate or accepted, Photoshop leads me to the statements that he cannot start my subscription and will be propmt me once I restart photoshop to start of such subscription. However, when I try to do, it starts the process. What's wrong?

  You did not no information system, or none of that, so generic questions activation to something on your system interfere all that we can do is guess autour. In any case, this kind of things is better managed by calling support. Also, check on your account that your subscription is actually still active.

  Mylenium

• This computer will be sufficient for cf8?

  Hi all
  Just a small one pairing from Dell 1420, are its specs is allowed for the application described above? Is the Intel Pentium Dual Core processor for cf8 ok?
  Also windows vista will give me headaches with cf8? Thank you
  
  Processor Intel® Pentium® Dual Core T2310 (1.46 GHz/533 Mhz FSB/1 MB cache)
  
  Memory: 1 GB Doble shared channel DDR2, 667 MHz
  
  Hard drive SATA storage of up to 80 GB has 5400 RPM

  Vista is a stupid idea (IMHO). I just bought a laptop for a Christmas gift and made sure it came with XP instead. I do know that if I would exclude your development system, I would certainly add a gig of ram if you can.

• HP Pavilion 15-n013ca: HP Pavilion - system will not ask for a user connection

  Had a virus - malware.  load malwarebytes and cleared.  I was able to reboot and log in.  I had too many running - Kaspersky, Mcafee and Windows virus protection systems.  Kaspersky has expired, then started the uninstall, frozen system.  I had to do a hard reboot.  I am now in a situation where when I start the laptop, the system receives the background color shows the date and time, but ask not my user name and password.  I can't connect to the laptop at all.

  I don't have a set of boot disks to this system.  I bought with windows 7, improved a couple of years of Windows 8 and never got to create a bootable cd.  What are my options?  I don't know if it's the windows registry which is damaged or not.

  Any help would be greatly appreciated!

  Hello

  As you started to uninstall Kaspersky, the system should created a restore point, if you can try to restore it as follows.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Choose the restore point created before you uninstall Kaspersky and then proceed to the system restore.

  Kind regards

  DP - K

• effects of alternative for CS5

  Hello

  Can anyone recommend any good effects for CS5 software.

  Baz

  Discover Pixelan (six pack 3D, SpiceMaster, AnyFX, CreativeEase) or Digieffects (DELIRIUM will be available for CS5 this fall) or some of the Trapcode/red giant plugins (shine, Starglow, etc.).

  You don't really specify what kind of effects you're after, but it's a start.

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• I'm a student of Adobe CS5 version and there are a few updates to download, but not install.  I have enough active licenses.  What can I do to install these updates.  CS5 is sufficient for my needs.  I needed to go back to OEM and everything and reinstall

  I had to find my computer OEM conditions.  I have a copy of the Adobe CS5 student version.  It is sufficient for my needs.  Only, I reloaded CS5 and tried to get the basis for program updates.  They have downloaded, but then they not have installed.  I would like to install these updates of Basic.  I have valid licenses for the product.  Please help if you can.

  Try direct updates

  https://www.Adobe.com/downloads/updates/

• What specific products are part of the complete abo for cs5-client, which will be the price after one year and will be the rice price information early enough to cancel the contract? Best regards Jürgen

  What specific products are part of the complete abo for cs5-client, which will be the price after one year and will be the rice price information early enough to cancel the contract? Best regards Jürgen

  For details please see the link below:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  Otherwise, you can reach the Adobe sales as well.

• Try to update Camera Raw for CS5 on Mac - which will open the Canon 7 d Mark II (Mod: originally described as the 7 d) raw files?

  I can't open my a Canon 7 d raw files (moderator edit: actually a Mark II).  Mac running Yosemite 10.10.5 I tarea to update Camera Raw Plugin for CS5 12.0.4

  Update should I use?

  
  

  I am running:

  Mac Yosemite 10.10.5

  Photoshop CS5 12.0.4

  Current Raw plugin is the 6.7.1.340 version

  
  

  What updates should I do to be able to open my raw files?

  the 7 d mark ii is not the same as the 7 d.

  the mark ii has cr 8.7 or better and ps cs5 can not be updated beyond cr 6.7.

  your options are to continue to use the dng converter or upgrade ps (cs6 or better).

• System restarts continuously after installed CS5

  I have a workstation CS5 here I took out of service a few months ago because he was showing signs of corruption of the operating system and possibly a virus. After you play with it for a while, I did a rebuild of bare metal, start of shaped both drives and reset the default system BIOS. The system has worked well for 6-7 hours during the installation of Windows and configuration, driver DL and update, etc. After that I installed CS5 Master Collection, he returned to his old behavior.

  ASUS M4A88T-M mobo, Athlon II CPU, 8 GB of RAM, 250 GB boot drive, data of 1 TB, crappy mobo ATi graphics card with NVidia GTX260 primary, Win7 Home Premium disc.

  The system starts and gives a login screen, if I do nothing, 2 minutes later he made a stop and restart. If I connect to one of the two users accounts, he gets to load the Office before saying "Disconnection" and then stop and restart. This is the behavior that led me to consider out of service (and resisted all attempts to fix-I couldn't even turn off before CS5 it would turn). It runs in safe mode a bit longer (in fact, it would HAVE before--did not since reconstruction), but by selecting "not automatically restart" at the time of the start-up has no effect.

  It is possible that it is a hardware fault or firmware, but the quirk of the system works fine until CS5 was installed points to something has changed to a configuration of boot/startup/initial level, well before any CS5 app is started.

  I moved since long CS5.5 and CC, but I maintain this system for work on some shared customer projects. I have little need back up soon. If anyone has any better ideas I'll try a new card mother and (if necessary) an another reconstruction. Very frustrating...

  ANY ideas on what aspect of CS5 could be the cause and how to enter and fix it without yet another reconstruction and another license to success that will probably require a call to Adobe of difficulty? I think it must be some remaining fragment of the instructions of the Windows Installer, try to finish a step of the installation and not come out. Or...?

  Found. It was an incredibly evasive bootkit TDSS virus who survived a format of bare metal and OS install and expressed only by chance. Headless Windows malware tool he and TDSSkiller stomped out. All updates not installed, no other problems. The question, and more of the virus has been actively doing, was that it prevented a security update critical installer, which has created one list of other problems related to the update.

  By far, the malware nastiest I ever had to deal with. But fixed.

  Kudos to Kaspersky to make the available TDDS remover for free.

• Frame7.1 will not import Photoshop CS5.1 .jpg file

  I'm (reluctantly) in the migration process from Windows XP +.

  Photoshop CS V8.0 for Windows 7/64 bit + Photoshop CS5.1.

  FrameMaker 7.1 works well on XP and W7/64, including the generation

  PDF file. I can import .jpg files written by Photoshop CS. etc.

  ... except...

  If I open a (already imported) .jpg file checked using Photoshop

  CS5.1 and, without making any changes, save it, Framemaker may not

  more import it, either directly or by reference:

  "The filter has encountered an error and could not complete the.

  translation. "

  It seems that the Photoshop CS5.1 writes a file format different .jpg

  Photoshop CS (rhetoric: How can it be acceptable for CS5.1 to)

  change the format of a Basic .jpg file? but I digress...).

  Review the .jpg file original vs the .jpg file of CS5 I think:

  -The new file is smaller (79KB vs 82KO) - Note the two are small!

  -Content (reviewed by using a binary editor) is quite different.

  -Two versions of the same view, in CS and CS5.1 and in

  many viewers.

  I tried various experiments, try to understand this and have

  had no luck. I can open the CS5 Photoshop CS .jpg file and save it

  Once again but Framemaker will not open this version or the other, same error.

  This isn't a question of size of RAM (8GB), to space swap or something else

  associated with computer equipment. All SW updates are up-to-date, etc..

  I have tried to import into a new, by default the template file, etc.

  So, I tried recording in .bmp format and the first time I tried to import it

  FrameMaker died immediately: no trace of the stack, no error message, the

  Framework process had just disappeared. After the reboot, the 2nd attempt, I got one

  black rectangle size correct, but all black = not usable.

  Photoshop CS + Framemaker has worked well for several years, so I don't know

  It is a question of CS5.

  Anyone has any ideas on how to make CS5.1 to generate a file .jpg 'standard '.

  file?

  Anyone has any ideas on how to import images CS5.1 using

  FrameMaker 7.1?

  Please don't advocate the Framemaker to V10 upgrade... Adobe provides a zero

  information on migration (from any version) and the last time that we did

  This cost us several months of work to 'fix' 14 + 50 pages +.

  manuals. We'll stay with XP/CS and 'eat' the new W7/CS5 system

  before FM10.

  Thank you

  Previously (all works)

  Windows XP/SP3

  Photoshop CS V8.0

  7.1P116, unstructured FrameMaker

  Today:

  Windows 7/64-bit SP1

  Photoshop CS5.1

  7.1P116, unstructured FrameMaker

  I'm embarrassed... I should have tried more of .jpg and .bmp.

  I went to .tif and select .jpg compression and

  (a) I can import the file

  (b) the file is only slightly larger (92 KB vs 82 KB)

  (c) renders it same as before in the PDF file.

  Arnis thanks...