Another problem of horizontal menu SPRY with IE7

I've posted this before, with no responses, but I think I narrowed down it to a problem of CSS with IE7.0 response. If you view the attached link with Firefox or Opera, the background color of menu responds correctly on the bottom of the fall. In IE7, the background color is ignored, causing the menu to be translucent and, uh, ugly. Does anyone else has had a problem with the CSS background-color in the horizontal menu css SPRY attribute does not?

HELLLLLP! and, uh, thank you.
Karl

Prototype link using spry, css, ajax sprites and other magic.

I posted on the forum Spry in Adobe labs and got the answer. He resided in the z-index of the horizontal menu style. I invite you to consult the answer suggested in this forum. I tried 3 times to put a link in this response and it wrong three times. Sorry "about it.

Karl

Tags: Dreamweaver

Similar Questions

  • Please help with my problem of Bar Menu Spry Dreamweaver CS5

    Hello

    I would be really grateful if you could help me with my problem. I use dreamweaver CS5 (design mode) on PC and I use spry menus bar as my browsing. for some reason when I go to the sub menu there's going behind the text on the side of it. This can be seen here: http://www.moneymakingmonkey.co.uk/

    How can I change this?

    can someone help me? I'm sure its simple but I'm new on this (as you can probably since my site up to this HA)

    Thank you very much

    Liam

    Sorry to be the bearer of bad news, but the use of ridicule of absolute positioning is the problem, not the Spry Menu.

    If you change the z-index in apDiv14 as later, it should help the menu to be at the top

    {#apDiv14}

    position: absolute;

    left: 89px;

    top: 110px;

    Width: 221px;

    height: 237px;

    z index:900.

    visibility: visible;

    }

    GRAMPS

  • column width of cells using the horizontal menu spry

    Hello

    Try to set the column width of cells using the Horizontal Spry DWCS5.5 menu.

    View-source: http://www.roatan.ws/spry-menu-bob

    I used the help to get directions and I think I did it correctly, but I don't know about you.

    / * Container of menu items are same fixed width parent * /.

    UL. MenuBarHorizontal ul li

    {

    background-color: #356A 68.

    float: none;

    background-color: transparent;

    height: auto;

    Width: auto;

    }

    Try to clean up my site and make things just one in search of work.

    Any suggestions appreciated

    Bob

    Spry menus contain all the columns in the table or cells.    They are just lists

    • with CSS style tags.

      UL. MenuBarHorizontal li

      {

      margin: 0;

      padding: 0;

      list-style-type: none;

      do-size: 12px;

      position: relative;

      text-align: center;

      cursor: pointer;

      Width: 8th; / * adjust top-menu width * /.

      float: left;

      text-decoration: underline;

      }

      UL. MenuBarHorizontal ul

      {

      margin: 0;

      padding: 0;

      list-style-type: none;

      do-size: 10px;

      z index: 1020;

      cursor: default;

      Width: 8th; / * Adjust submenu width * /.

      position: absolute;

      left:-1000em;

      background-color: #356A 68.

      }

      Nancy O.

      ALT-Web Design & Publishing

      Web | Graphics | Print | Media specialists

      http://ALT-Web.com/

      http://Twitter.com/ALTWEB

      http://ALT-Web.blogspot.com/

  • Menu Spry, horizontal submenu, must fall down in front of flash player in Internet Explorer

    I am building a Web site that contains a horizontal menu spry with submenus on some of the tabs. On one page of the Web site, there is a flash drive in the upper part and for some reason any IE puts the drop-down list behind the flash player. I guess I need to change the CSS files for Spry menu, but I don't know where to start? How can I tell IE to display all of the Spry elements on top?  Any ideas? Just a side note... all other browsers display the menu correctly.

    I use Dreamweaver CS4 on Mac.

    Thank you

    I'm curious! Please take a look here http://kb2.adobe.com/cps/142/tn_14201.html

    GRAMPS

  • Problem of formatting in the content with the horizontal menu widget area

    I use a regular horizontal menu widget with several different taps within an empty page.  I lived as if the content field under the first tap, for example, is 300 pixels long, all other fields of content under other taps will inherit the same height.  Because I have different amounts of text in various taps, I need to be able to REDUCE the height of the text field. But it won't let me.

    Any input is much appreciated!

    Fred

    Hi ACW100,

    Please select size spacing: uniform point in the menu dropdown.

    It does not resize the tabs separately, but it might serve your purpose (spacing problems).

    Kind regards

    Akshay

  • menu Spry displays behind the video content

    Hi guys, I built a horizontal menu spry just above a section that contains a video as the first element. The menu is just above this area, and when I test on Firefox and Safari, the menu goes behind the video. IE 7 works correctly display the menu of the video object. I've seen other posts with problems in front where IE does not display the menu on the rest of the content. Any suggestions with the video problem?

    That's ok. And by the way, there is no index-z involved in this. It's that
    Flash is constantly redrawn on the page, so the content assets.

    --
    Murray - ICQ 71997575
    Adobe Community Expert
    (If you * MUST * write me, don't don't LAUGH when you do!)
    ==================
    http://www.dreamweavermx-templates.com - template Triage!
    http://www.projectseven.com/go - DW FAQs, tutorials & resources
    http://www.dwfaq.com - DW FAQs, tutorials & resources
    http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
    ==================

    "deesadler" wrote in message
    News:fcphma$k4q$1@forums. Macromedia.com...
    > Sorry Murray (Adobe Community Expert, not ACE) ;) I saw all your
    > response.
    > Dee

  • Dropdowns Menu Spry flicker/Disappeing with IE7

    Hello Experts Spry,

    I worked to find a solution to this problem for weeks and have search many forums on how to not fix or none this result. Of course, FireFox works fine, but IE7 has a flickering problem / endangered on the Spry drop and it seems to happen only when it is contained directly below. This leads me to believe that it is a matter of z-index CSS that IE7 does not agree with. I use Spry pre-release 1.6 and my temporary Internet files from IE 7 automatically checks for newer versions. When the cursor is in the meantime drop IE menu items seems to want to active the "hideDelay" action comes from the SpryMenuBar.js file. If you select the first item in the menu drop-down menu to wait one second and then select the next item below and wait again, you can slow down also move downward without the drop endangered. However, this will not do for navigation and quickly irritate users.

    Here is a link to demonstrate the problem of flicker/disappearance in IE 7. http://www.obtain.com/WebTest/TopSideNavPage.html.

    This link shows that no content under the menu bar drop-down menus work perfectly.
    http://www.obtain.com/WebTest/TopSideNavPageNoContent.html.

    I really need a solution and fast, I appreciate this forum can provide any assistance.

    Kael

    Found the answer on another forum. It seems IE must have all instances of 'li' and 'a' tags defined with display: block in CSS. Now everything works fine.

  • connect horizontal vertical spry menu

    Hello

    I'm a beginner, so maybe that's a stupid question... But here we go

    Is it possible to 'connect' bars of horizontal and vertical menus between them?

    I'll try to give an example...

    The horizontal (main menu, in the header of the page) is:

    Article 1 article 2 article 3 article 4

    (void 1.1)      (as 2.1)

    (in 1.2)      (under 2.2)

    Now, when you click on one of the links, say "Sub 2.2", I would like to have the sidebar show this:

    Point 2

    void 2.1

    void 2.2

    subsub 2.2.1

    SubSub 2.2.2

    SubSub 2.2.3

    void 2.3

    ...

    Where 'Item 2' remains fixed as a title, and submarines form a menu accordion revealing sub-du submenu (you can open and jump on an another auxiliary by clicking on it)

    Now, the easy way to do this is to create a separate page with a menu accordion separated in the sidebar for each of the 'Elements '. But this means that when I change something (add a submenu, change its name, change a link, etc.), I needed to change the pages separate as well.

    Is there a not too complicated way of linking them together? So that the point 2 in the sidebar is not just a Word only a menu and the menu at the bottom. not separated, but refer to the horizontal menu located in the header? In other words, I would like to create a single list with 'Everything', 'Subs' and 'Sub subs"that I can see and use them in places and formats spry.

    Thanks in advance!

    Tom

    Short answer, no way to do this with Spry menus.  Spry is also dead.  Adobe abandons this concept in 2012 and removed Spry in DW CC because he lost it utility and is not mobile friendly.

    You might want to consider a different approach to navigation as a jQuery Mega Menu.

    5 best jQuery CSS3 Mega navigation Menus | Marie Claude Chandonnet

    Nancy O.

  • Horizontal menu with a higher level having pages below.

    I examined the response to a similar post and reviewed the settings as shown in the picture. My problem is that I want this a menu item to display pages vertically and not fall down and display on the right. I tried all means to set the preferences on the menu I can think and she won't do not impact on the menu as a whole. This includes unchecking the checkbox that allows individual changes. Can someone give me a step by step procedure to do my a top-level menu item displays pages falls down vertically to selection as opposed to low and to the right of text? It is the latest version of Muse. The menu widget was created allowing him to detect the pages the way they were put in design mode.

    OK just in case other users new to dream have the same problem with a horizontal menu that need to have one of the top level links a vertical of the menu drop-down below. Initially in bird's eye view, that I had created the top-level page and all other pages below stacked vertically. What I did to display the way I wanted is to remove the vertically stacked pages and place them on the same horizontal line. See below...

  • horizontal menu with horizontal submenu

    I am trying to create a horizontal menu with a submenu horizontally directly underneath.  Thus, when you hover over the items in the top menu, the list of subitems appears as a horizontal menu directly below the top menu.  I was able to change the widget spry Panel tabs to do for the most part, but there must be a better way. It seems that the widget menu spry for the horizontal menu has just a drop of water to the bottom of the sub-elements in a vertical list below the top menu item.   I searched but not found the answer.  Could someone please help me with suggestions?  Thank you.

    Tutorial:

    http://www.sohtanaka.com/Web-design/horizontal-sub-nav-with-CSS-jQuery/

    Example:

    http://www.sohtanaka.com/Web-design/examples/horizontal-subnav/

  • Perhaps another problem with Css

    I think this is another problem with my CSS is applied because of a problem but I have really no idea.

    The site is Alliance of injuries. The problem is with the images in the middle of the page. They are supposed to be in three rows of 3-3-2, but for some reason some they just below the other. When I click on Home.css in the "View Source", it is titled 'Page not found' don't know why.

    Anyone who has any ideas I would appreciate it.

    Brad

    First thing - you must stop using filenames with spaces in them.  That can get you into trouble.  Use only letters, numbers, dash or underscore - nothing else.

    Next thing, the image and CSS links in this page (located at the root of the site) are all (except two) wrong links related document, for example,.

    
    
    
    
    If the page is already at the root of the site, there is no ".." as possible.  It is sure to cause you problems.  All these links need to be just like this one (which is correct)-
    
    
    
    (although the Home.CSS file does not appear on the server!)
    The reason why your images are displayed in a vertical table is that each of them is contained in a
    container with no specified width (was this width specified in the Home.css file does not exist?).  So that they appear along a horizontal line, you need to specify the width of the div and float tag he left.
  • [Adobe Muse] How to make a horizontal menu with drop down horizontal?

    Hi all

    I would like to make a horizontal menu, but have drop them the low go horizontally rather than the default and the vertical level, like the model I made in photoshop. Can someone help me with this? Thank you!

    Screen Shot 2015-02-04 at 15.44.19.png

    My recommendation is to watch the following video of Adobe's Terry White, explaining how to make a custom horizontal menu (use the techniques and adapt):

    How to design a Custom Mega Menu in Adobe Muse CC - YouTube

    If you have any questions after watching, will try my best to answer, but feel that his explanation will be much better than any I can give here in writing.

  • manage the z-index property in the chrome browser (was: is there another problem with Chrome?)

    Hello

    I wonder is there another problem with Edge and Chrome.

    I know that something got sorted out but now I have a problem with rectangles (such as the hitboxes) not appearing is not in Chrome.

    Anyone know why this is happening?

    Hi Robyn,

    Looks like a problem with chrome. He is not able to manage the z-index property (although set) in this case. Due to which the user is not able to click on the button that is hidden by another element.

    There is a workaround solution you can do on board animate:

    You simply select the item named "s_cpl_fa_nav_x2" in the Panel edge ' Elements' animate and drag just below the element named "s_cpl_fa_0_guide_page1" and delete the selected item. This will place the first below the latter, with regard to the stacking order of the UI, and so the click event will work.

    I hope this works.

  • I created a horizontal menu with a submenu it grows downwards, it is possible to extend to a maximum?

    I created a horizontal menu with a submenu it grows downwards, it is possible to extend to a maximum?

    My menu is at the bottom of the page and there is no space to lay down.

    Hello

    As it has already been mentioned that you can achieve this by using a tab panel widget or composition.

    In addition, you can use this menu widget, try turning the widget which will give you the options of the menu upwards.

    http://Muse.Adobe.com/exchange-library/menu-vertical-Accordion-widget-1

    Thank you

    Sanjit

  • My CS3 spry horizontal menu does not work in Everybody, my swap image behavior does not dry. If anyone can help. Thank you.

    My CS3 spry horizontal menu does not work in Everybody, my swap image behavior does not dry. Can anyone help? Thank you.

    To the place where I put before (and burst out of the container foot...), put it below:



    Beth

Maybe you are looking for

  • 3 GPU in a C20?

    I will mount two Quadro 410 in my C20 for help in the calculation of BOINC. If I get another Quadro in the third slot PCI Express (X 4) will I have the advantage of it as a coprocessor? Thank you Dan (Mod edit: corrected the title to avoid confusion

  • PROGRAM COMPATIBILITY ASSISTANT

    Have advice that guard appearing indicating PROGRAM COMPATIBILITY WIZARD THIS PROGRAM has KNOWN COMPATIBILITY ISSUEScheck online with Microsoft ACER UPDATER PROGRAMEDITOR ACER INCORPERATEDLOCATION c. / PROGRAMS ACER / ACERePOWER MANAGEMENT/e POWER PL

  • How can I find out how much RAM I can put on my Aspire M3450?

    I have 6 GB ddr3 and what to know if I can put more on my Aspire M3450 - UR10P, I have Windows 7 Home Premium 64-bit with 1 TB of HDD and a processor of eight cores AMD FX 8100. I tried searching the Acer site and cannot find anywhere telling me any

  • HP Officejet Pro 8600 Plus: cartridge problem 8600

    Message seemed to change all cartridges - I changed two a couple of days, so they need not all change - black was about due for a change, so I took them all out - replaced black... had the same message... Replaced all - same message now also "one or

  • dv6748us problem of input audio speakers downgraded.

    I lowered my pavilion dv6748us notebook PC XP, Vista and everything works but I can't get my speakers to cut when I plug the headphone... No one knows how to fix this problem or driver that I could download? Thank you...