Another question of Simulator
Hello
I have a purchase order in my application and when I press the keyboard back button it automatically ask this question
"Chages made!
and with the three buttons options
"Save", "Throw", "Cancel".
My question:
1 is happening only on Simulator or a real device as well because at the moment I don't have camera with me.
2 If yes how can control this message, either stop it or change it.
1. This will lead also in real aircraft.
2. to avoid this message override onSavePrompt() in your screen. As:
protected boolean onSavePrompt()
{
return true;
}
Concerning
Bika
Tags: BlackBerry Developers
Similar Questions
-
Yes, another question regarding the freezing of Safari - EtreCheck report included
Yes, another question regarding the freezing of Safari.
From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.
I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.
Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.
Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.
Thank you in advance.
Ben
-----------
EtreCheck version: 2.9.11 (264)
Report generated 2016-04-28 22:48:58
Download EtreCheck from https://etrecheck.com
Time 05:45
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Click on the link [check files] help with unknown files.
Problem: Apps are broken
Description:
Safari freeze when opening new tabs / switching between the tabs.
MacBook Pro (15-inch, mid 2009)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro5, 3
1 2.66 GHz Intel Core 2 Duo CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = battery check - Cycle count = 389
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
NVIDIA GeForce 9600M GT - VRAM: 256 MB
OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour
FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-ST DVD - RW GS23N)
Built-in ISight from Apple Inc..
Card reader Apple
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Mac App Store and identified developers
~/Library/LaunchAgents/com. GoodShop.updater.plist
~/Library/application support/GoodShop/updater
A unknown file found. [Check files]
/ Library/Application Support/Symantec/virus
[no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]
/ Library/Extensions
[no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]
[loading] expressvpn.tun (20150118 - 2016-04-12) [Support]
/ System/Library/Extensions
[no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]
com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]
com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]
com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]
CMA: path: / Library/StartupItems/cma
RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon
Startup items are obsolete in OS X Yosemite
[loaded] 8 tasks Apple
[loading] 165 tasks Apple
[operation] 65 tasks Apple
[loaded] 45 tasks Apple
[loading] 161 tasks Apple
[operation] 83 tasks Apple
[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]
[operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]
[loading] com.epson.esua.launcher.plist (2015-06-29) [Support]
[operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]
[loading] com.google.keystone.agent.plist (2016-03-01) [Support]
[operation] com.mcafee.menulet.plist (2016-03-23) [Support]
[operation] com.mcafee.reporter.plist (2016-03-23) [Support]
[loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]
[operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]
[operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]
[loading] com.adobe.fpsaud.plist (2016-04-15) [Support]
com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]
[loading] com.expressvpn.tap.plist (2016-01-27) [Support]
[loading] com.expressvpn.tun.plist (2016-01-27) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-01) [Support]
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]
[operation] com.mcafee.cspd.plist (2015-05-08) [Support]
com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]
com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]
[operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]
[loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]
[loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]
[loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]
[loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]
[loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]
[operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]
[loading] com.symantec.navapd.plist (2009-09-14) [Support]
[loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]
[operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]
[operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]
[operation] com.symantec.symdaemon.plist (2009-03-27) [Support]
[operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]
com [running]. GoodShop.updater.plist (2013-09-24) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]
[failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Application of Google Reader (Google Drive.app/Applications /)
Dropbox application (/ Applications/Dropbox.app)
ExpressVPN application (/ Applications/ExpressVPN.app)
CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)
[ongoing] com.DYMO.pnpd
[ongoing] com.getdropbox.dropbox.83552
[ongoing] com.google.GoogleDrive.81632
[ongoing] com.macpaw.CleanMyMac3.Menu.80672
[ongoing] com.mcafee.ssm.ScanManager
[ongoing] com.mcafee.virusscan.ssm.ScanFactory
[loading] 420 tasks Apple
[operation] 193 tasks Apple
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
Default browser: 601 - SDK 10.11 (2016-04-18)
Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]
DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]
QuickTime Plugin: 7.7.3 (2016-04-12)
Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
iPhotoPhotocast: 7.0 (2010-11-15)
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]
SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]
JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)
Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)
GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)
SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)
PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)
Flash Player (2016-04-15) [Support]
Flip4Mac WMV (2012-05-15) [Support]
Growl (2015-09-16) [Support]
Java (2016-04-18) [Support]
Norton\nQuickMenu (2010-11-16) [Support]
Trusteer Endpoint Protection (2016-04-18) [Support]
Time Machine not configured!
5% WindowServer
1% kernel_task
0% fontd
0% SymDaemon
Top of page process of memory: ⓘ
445 MB kernel_task
Mdworker (18) 430 MB
164 MB Google Reader
Dropbox 123 MB
VShieldScanner (4) 66 MB
106 MB free RAM
4.15 GB used RAM (770 MB cache)
6 MB used Swap
April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash
com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck
28 April 2016, 22:21:42 self-test - spent
April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash
April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash
April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash
April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash
/Library/rapport/*/rapportd.app/Contents/MacOS/rapportd
April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang
/Applications/Safari.app/Contents/MacOS/Safari
April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]
/ System/Library/CoreServices/SubmitDiagInfo
April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang
April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang
April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash
April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]
/ Applications/Airmail 2.app/Contents/MacOS/Airmail 2
26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang
Remove all apps viruses you have
Symantec, McAfee, Norton...
CleanMyMac3
-
Another Question... Pasted the first album... but does not work properly
Hello-
Another question - I stuck my first file (wpa without loss) from the album on my rocket and when I go to him, he travels only (so 1,2,3, etc. and then it again.) The songs look like they have any length, if that makes sense. The bottom bar is from 0:00 0:00. The strange thing is the player will play all music pre-loaded there, and when I tried to copy a song the player on the computer off, he played. It is therefore not the file of the song itself I guess.
What I've done wrong? And how to fix it?
Thank you very much!! This forum is very useful for a beginner!
WMA Lossless is not a supported audio format. Which means that it won't work. You will need to re-Ripper in plain ' ol .wma, .mp3, .ogg or .flac format.
-
Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if do leave LR or my car, I get the message; "Disc burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone can find out if there is something I can do. Or could it be that my computer just can't handle it? Help! So frustrating! I have a Lenovo PC, I don't know if that makes a difference. Any ideas? Thanks a lot for your help!
You burned discs with other programs using this computer? Are you sure that you have a drive that will burn the disks?
-
Hi, I have another question regarding the use of the field date in Adobe Designer 8. I have the updated domain in place so that the person can enter the date, lets say, 12/12/11 and it will convert to December 12, 2011, or, the user can click on the calendar that is attached to the date field and make a date selection. My question is this. Is there a way that can not only the calendar go to any date by selecting < or >, but can also go to an exercise < < or > >? We have contracts that extend from 2 to 3 years and want this option to be available.
Thanks for any help you can provide.
Here is how I currently have my date fields in place.
In the field section:
View model: MMMM D, YYYY
Edit pattern: M-D-AA
Section of the value:
MMMM D, YYYY
Date must be entered as per example, 12 January 2012
Liaison section:
MMMM D, YYYY
The calendar widget allows you to select other years.
When you open the calendar, click on the name of the month, the calendar will show you every month of the current year.
When you then click on the year, it shows you all the years of the current decade.
-
Hi guys...
I had this posted in another question I raised yesterday... so thought that I should probably get a question by discussion
A year after double view and month appear on the structure folders after you import the photo
See things like
Folder Image count
10 2009
2009 480 p
If I import files with the correct creation date year etc... Why LR would create two folders with the same name...
See you soon
Steve
Hi I think I've sorted it... Folder locations are the same as in
C:\Documents and settings\stemcg\my Documents\My pictures\
I looked at the link at the top... when I right click on the files and selecetd add a parent folder that it changed the view of annual records being next to each other for example...
5 2010
2010 5000
4 2011
2011 4096
It separated like this
upper part
1996
2000
....
2009
2010 5000
2011 4096
My Documents
My photos
2009
......
5 2010
4 2011
I then right click on the folder with the least number of photos in there for example
My perso\Mon pictures\2010 I selected update folder location.
I pointed out the Selection tool in the same folder that is my perso\Mon pictures\2010. Then, he gave me a prompt to merge the files... It merged then deleted the My Pictures folder and added photos in the folder above... it looks like now
upper part
1996
2000
....
2009
2010 5005
2011 4100
My Documents
My photos
2009
......
The folders listed under my photos with the count in the records of the year preceding has increased in quantity... IE 2010 went from 5 000 to 5 005 photos...
result!
Thanks for the pointers guys...
(one day I'll have the shot of LR!)
-
Dell Optiplex 320 yet an another Question of Ram
Hello
I have an Optiplex 320 and it seems do not like this kind of ram. I tried this and several other modules I had to hang out with the exact specifications of same. My question is, what makes Hynix so special that it works with the optiplex? Is there something owner seeks the mobo?
With the Hynix ram the machine starts fine, no problem. With the Kingston (and other brands) of PC2-5300 it don't POST and gives me the 1-3-2 beep code.
Here's what I did to solve problems. (I've got 2 identical Optiplex 320 I did this troubleshooting)
- Reinstall and reinstall the modules of resettlement
- Install the latest version of the BIOS. (ending in12)
- Delete and remove cmos
- I tried PC2-6400
- CUSS at it
- Deleted graphics card
- Attempt 1 module at a time
Basically, what is the difference?
Any ideas would be greatly appreciated.
Thank you.
Work RAM
RAM does not
I mentioned that I'm a huge ASUS and Corsair fan. :-) I swear by the two.
Corsair has a "memory Finder" page.
See the link below.
Corsair has done the job to see what is compatible with common systems. Of course, they have listed Dell systems.
That's what I used when getting memory for my 8900 XPS.
Yes, the DRAM is can be a huge pain for materials developers. "Today", most hardware designers use models tested beforehand and DRAM pre-approved and layouts. But not all of us have this chance. There are times when custom DRAM controllers are needed. And someone has to do the designs which use a lot of other hardware engineers. :-) Then, the DRAM manufacturers provide detailed hardware simulation models and precise signal integrity models.
I'm a fan of Intel, not so much a fan of the DRAM factory. So I look at it, it's basically like this, that the Intel chips have good tolerances. This is the DRAM chips which vary tolerances and more.
Also, is the "fastest" DRAM * not * always work in a system that isn't spec'd for it. The fastest DRAM also "can carry data more quickly after the clock (one of many waiting time parameters). So in this case, it depends if that specific DRAM contains the data a bit longer (this fine and in spec), or this memory controller specific Intel is able to work with data held not valid so that requires the Intel specification.
Also, voltage, temperature, aging, all come into play in the electronics of the real life and tolerances.
Then, you can see why some people say "XYZ" works in _my_ system. But, who can * not * always be the case with each system. It can work in 90% of the systems, and then these 10% are screwed. So this is why * I * have different opinions on which suggests improvements.
* I * don't want these 10%, 20%, 70%, either, to screw.I see the Corsair Memory recommended as work for? ~ 99.99%? of the people. So, maybe 1 in 10,000 will be out of luck trying the upgrade?
My _guess_ is that Dell has between a 5-sigma and sigma-6 rates of their PC and max upgrades memory failure.5-sigma failure rate: 0.023% (99.977 good)
6-sigma failure rate: 0.00034% (99.99966 good) -
An another Question of license Windows
I purchased a copy of Windows 7 retail and installed on a laptop computer to upgrade this laptop Windows XP.
Unfortunately, this laptop was stolen.
I still have the CD with Windows 7, however, and want to use it to upgrade another computer laptop Win XP.
Question is this.
Doesn't the person who stole my laptop stolen also my Win 7 license rights or the fact that he (or she) has stolen software makes him an illegal user of license and my rights to the license to stay with me?
If you have proof of purchase you can get a replacement product key.
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246You can also try Windows Genuine Advantage Support (scroll down to find your country)
http://customercarecontacts.com/contact-Microsoft-support-phone-of-Microsoft-Corporation/
US phone numbers: Windows 7: 1-866-530-6364
Windows Vista: 1-866-530-6599
Windows XP: 1-866-530-6599
Microsoft Office: 1-866-530-6599
All other products: 1-866-530-6599J W Stuart: http://www.pagestart.com
-
Strange sound behavior... question of Simulator?
I have an app where I replied the cowbell with their C + c++ demo / .pro files (except my context property is "app") and ImageButtons to call sounds so much like the demo of Bell, I have:
ImageButton { ... onTouch: { if (event.isDown()) { app.playSound("bark1.wav"); } } }It will play a sound, but sometimes my file "bark1.wav" sounds deaf/one time sometimes and other times sounds as it should. Another similar button, I use the "meow.wav" and no sound at all out. As a last test, I used the "moo.wav" of the demo, and which works better (less muffled survey / playing each time). So is this my .wav files? (They all work fine on Windows Media Player) What is the Simulator? Thoughts?
(all the three .wav files attached)
-Brian
Same behavior on Simulator and dev alpha.
Stuart
-
Another Question regarding the IPC in the BB platform (secure process for RuntimeStore)
In my scenario,.
Process one will constantly be voicemails from somewhere and put it in a table in a RuntimeStore, named _store.
B process, there is a thread T will waitFor the ID of the table in the _store. If succeeds, then copy to another location, i.e.,.
persisting an object and then eaten after this, the thread will remove the ID of the table in the _store.
I wonder if it is safe for both processes simultaneously access the _store.
Wrote in the store. B is read and write to the store.
If someone could help? Very well appreciated.
I am a bear with very little brain and can never remember the right way of doing things. I'm sure that someone will take the holes in what follows and suggest the best ways and it would be fantastic.
I think there are two issues here:
(a) simultaneous access
(b) persistence
(a) the simultaneous access to an object in the persistent store are no different from any object, they are located in PersistentStore, RuntimeStore or RAM.
Thus, for example, let's say we have a vector in PersistentStore, we use just like a queue to a single server (then only add to the tail and remove the head), with a separate 'lock' in RuntimeStore object. Synchronize us on the lock object before we add an element, or remove an item, our access is perfectly safe
(b) persistence
Yes I agree, this aspect is not clear. I always thought I want to commit an object placed partially updated, so in this example, would make the validation in the context of add or remove the treatment.
Of course, things become a little more complicated if you start to talk about data updated in the queue, but I do not think that these problems are related to PersistentStore as a result, I think that these are issues of a general nature and there is probably many places on the web where are discussed different mechanisms to make sure that it works well.
A few other points:
(1) I understand that the treatment of validation is "atomic" on the BlackBerry and the "wound", so if you make an object you will persist all changes to this object. Usually, I maintain a collection that is associated with an Application for validation, points specific in the treatment of requests to ensure that the data associated with an application conform to the battery be fired immediately after a commit.
(2) you can see updates of persistent objects, even if they are not posted. These changes will be lost if they are not posted. So if you have a line like the one above, and two Clients add entries in the queue without committing, the server see the two entries in the queue until the battery is removed. When the server restarts, the two went.
Does that answer the question?
-
Question of Simulator: white screen off center instead of application
Hello
I'm new on the BlackBerry community, the development of BlackBerry et al. Today, I downloaded the SDK to test the Tablet Simulator 0.9.2 but I already spent several hours trying to get something to run without success.
The Simulator is installed without any apparent problems. I have read the forums today and I had none of the problems that others have mentioned, as a screen freezes or problems during startup.
I use a trial version of VMWare Fusion 3.1.2 on Mac OS X 10.6.6.
I don't have Adobe Flash Builder, so I use TextWrangler. I wrote an applescript script which, during the recording of my actionscript file, called a perl script (I know, sounds redundant, but it works) and fact the compilation for me as posted by Taylor Byrnes (amxmlc, blackberry-airpackager). I'm able to talk to the simulator that my output from compilation shows any errors (as far as I know), but my application appear in the Simulator without the icon that I have provided.
When the application is started, all I get is a white screen off-center without content about it.
I've also compiled the HelloWorld example provided. What I received was another app in the Simulator with the default icon that does exactly the same thing: a biased white screen. Whenever I have recompile a script with minor changes, the icons in the Simulator flash for a millisecond, and then I get the same off white screen.
Someone knows something like that? Clues?
There is obviously something I have to hurt. I can put my arguments to command-line and script if that helps. I tested my swf file in the Flash Player application and it shows. All what I have there is a red dwarf with a TextField on the top.
Sorry for the comments and thanks for any help, you can provide.
Daniel
Are there spaces in folder names anywhere in the path to your project on your computer? If so try to migrate your development to a folder that has no space in any folder named everywhere in its path. Maybe it's not the cause of the problem, but in all cases, you should remove it as a possibility. Windows users are discouraged to use the directory C:\Documents and Settings typical for Playbook dirs project.
The other thing that went off to the top of some people using versions of command line is picky how the tools are. In your command line, try using the - C option, and make sure it's between - package
.bar and installApp -: I.e. instead of:
blackberry-airpackager -package HelloWorld.bar -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]
follow these steps:
blackberry-airpackager -package HelloWorld.bar -C [YOUR PROJECT WORKING DIR} -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]
The airpackager in the SDK 0.9.1 was picky about the order of the command line options. I'm still not on 0.9.2 but see nothing in the notes to having fixed them thereon.
Edit: Note; I've never had a center off white screen w/all of my command line compiling adventures, but before I got the mantra of the 'proper' command line, I got apps that showed a splash screen and then just went. I'm on Windows (XP SP3), btw.
-
[newbie question] JavaCard simulator - JCOP cards
Hello
I just started developing my first javacard applet and I'm stuck with a few questions:
- First of all, I would like to simulate the applet with the Eclipse plugin, but as far as I understand, most of the cryptographic primitives (1024-bit RSA, ECDSA,...) is not supported the JCWDE Simulator. I also tried jCardSim, which has great cryptographic support, but apparently does not support extended APDU... How to develop and test your applets?
Is there a simulator that supports the specification complete javacard 2.2.2? For example, I heard about JCOPtool but did not find much info... Is there a simulator with full support?
- According to certain specifications for the JCOP J2A080 javacard I found (http://www.commoncriteriaportal.org/files/epfiles/0674b_pdf.pdf), this card supports ECC on GF (p) for the keys up to 320 bits, as well as SHA - 256. This means that the card supports the signing mode ECDSA such as ALG_ECDSA_SHA256, given that this mode is not part of the specification of the javacard 2.2.2 API (as far as I can see: http://www.win.tue.nl/pinpasjc/docs/apis/jc222/javacard/security/Signature.html#ALG_ECDSA_SHA ).
Do you know where I can find a good overview of the javacard specifications and where to buy javacards in small quantities (10-50)?
Thanks for your clarification!
NXP has still the JCOP environment in active development, but he can't give everyone access to the tools. These tools include a simulator complete functions with debugging support. Maybe this isn't such a bad idea to contact them. For small amounts of cards, you must however try and find a dealer of the cards. A quick search on Google found to buy Smart SDK here, cards card base, JAVA, Mifare fingerprints digital... Note that as long as you don't block cards Manager or to destroy the cards otherwise, you can reuse the cards. Tests are normally made using the Simulator anyway.
ECDSA with SHA256 can certainly be implemented on JCOP J2A80. Once again, please contact NXP for more details.
-
Another question about hard drive setup
Thank you all for the info on PC and installation material. I have download the first CS4 trial version and it is awesome! I have one last question? I read the rules for storage and editing platform.
I noticed in the project settings, as there
captured video
Audio captured
video excerpts
Audio previews
And in the preferences
media database cache
media cache files
Correct me if this is incorrect
Drive a my OS and files in project
My second drive pagefile and media cache database and media file cache.
Third disc captured video & audio and video previews and audio previews
This system uses a combination of DV, AVCHD material. I would add another hard drive? I may be using raid 0 for the audio captured video edge.
No problem. Especially for raid0 configuration, you can easily use the on-board raid functions. No sense getting a controller separated for this card.
-
Another question about dbms_metadata.get_ddl
Hello
Recorded in as 'sys as sysdba' I tried to get the DDL for the EMP table in the SCOTT schema. Here is the output I got:
Remove the reference to SCOTT, we get another error (no surprise):1* select scott.dbms_metadata.get_ddl('TABLE', 'EMP') from dual SQL> / select scott.dbms_metadata.get_ddl('TABLE', 'EMP') from dual * ERROR at line 1: ORA-00904: "SCOTT"."DBMS_METADATA"."GET_DDL": invalid identifier
Question: How the ADMINISTRATOR bring the DDL for a table without having to sign in as a user that owns the schema?ORA-31603: object "EMP" of type TABLE not found in schema "SYS"
Thank you
John.He must inform the owner of this object when running DBMS_METADATA of SYS.
If we describe DBMS_METADATA
FUNCTION GET_DDL RETURNS CLOB Argument Name Type In/Out Default? ------------------------------ ----------------------- ------ -------- OBJECT_TYPE VARCHAR2 IN NAME VARCHAR2 IN SCHEMA VARCHAR2 IN DEFAULT VERSION VARCHAR2 IN DEFAULT MODEL VARCHAR2 IN DEFAULT TRANSFORM VARCHAR2 IN DEFAULTSo there must be another SCHEMA parameter when running DBMS_METADATA of SYS.
-
Another question on the appeal of a Web Form to a form of Client-Server
Thanks to this forum, I was able to get my Client-Server (6i) form to call a Web Form and pass it a parameter. Unfortunately, this code displays the user name and password in the Internet Explorer address bar. Although not critical, I would like to delete the user name and password to be visible. I am able to do this in the Web form code below because it calls JavaScript that will hide the address bar - but the WEB. Function SHOW_DOCUMENT is not available in the form of Client-Server.
So my question is whether it is possible to convert the code 'Customer Forms Server' below which is called my Web form using similar JavaScript functionality that is present in the 'Web Forms Code' example below? I want the server code to use the javascript functionality because I want to hide the address bar (which currently shows the users Username and Password).
Code client server Forms (able to use when you call this a form of Client Server Web form):
CL: = "cmd /c start iexplore.exe" http://9.35.32.205:7777/forms/frmservlet? " pageTitle = trial email Reporting & config = TTMSMENU & form=./forms_test/TrialMailReporting & otherparams = p_prospect = X 110679 & userid =' | the user | » /'|| GET_APPLICATION_PROPERTY (PASSWORD). » @' || : overall. DB_Instance |' » ' ;
host (cl);
Web Forms Code (able to use when you call this Web to another Web form form):
WEB. SHOW_DOCUMENT ("JavaScript: void (window.open ("http://'|| ") ip_port | "/ forms/frmservlet? pageTitle = dropper E/M & config = TTMSMENU & form=./forms_test/TrialMailReporting & userid =' | the user | » /'|| GET_APPLICATION_PROPERTY (PASSWORD). » @' || : overall. (("DB_Instance |'", "", "resizable = Yes, location = no, Toolbar = no, MenuBar = no, Status = no,")); self. Close () ',' _blank');
Any help would be greatly appreciated!
Published by: Buechler on April 8, 2009 15:57Looks like Forms 6i PL/SQL version does not correctly convert to hex.
That's what you can do:
Create a db stored functionCREATE OR REPLACE FUNCTION to_hex (p_string VARCHAR2) RETURN VARCHAR2 IS v_hex VARCHAR2 (1000); BEGIN FOR i IN 1 .. LENGTH (p_string) LOOP v_hex := v_hex|| '%' || LTRIM (TO_CHAR (ASCII (SUBSTR (p_string, i, 1)), 'XX')); END LOOP; RETURN v_hex; END;cl := 'cmd /c start iexplore.exe "http://9.35.32.205:7777/forms/frmservlet?pageTitle=Trial Mail Reporting&config=TTMSMENU&form=./forms_test/TrialMailReporting&otherparams=p_prospect=X110679&userid='||to_hex(v_conn)||'"';
Maybe you are looking for
-
Scroll down out of view again button, 42 FF?
I had this problem there are several versions and no me remember not that he was treated properly. Think of it this way... FF think are auto Windows task bar and spread its windows inside as well. Maxing out the window helps, but only for this sessio
-
Firefox won't download PDF files with javascript:doDownload();
I just installed Firefox version 9.0.1, hoping that it would solve this problem, but no luck. My bank allows me to download and print my credit in the form of PDF files on their site. I checked the code and the button that I click implements a javasc
-
How can I play titans mahjong on windows xp
Can I download mahong titans on windows xp
-
The above security update just settles I have automatic updates had implemented, but although he tries to install (more than 30 times) I had to disable the automatic updates in order to turn off the computer and do not have to wait for the update try
-
I received a zipped file and I can not unpack it so therefore impossible to extract information. Please can someone help?