Strange sound behavior... question of Simulator?

Similar Questions

• Satellite Pro A60: strange sound coming from speakers

  Hello.

  My brother has a Toshiba Satellite Pro A60 - my old laptop. However, it has a strange sound question. I wiped it a few months back, and the sound worked fine. However, after a week or two he suddenly started to sound like the speakers were blown out.

  I made the assumption that stakeholders were indeed blown and connected to external speakers - but they made the same noise! I was wondering, this sounds like a card his fries, or a drivers/software error?

  If it is a mistake to sound card, the sound card can be changed?

  Hello

  without changing the card its couldn t, it s on the motherboard and if you want to Exchange, you must exchange the motherboard together.

  First question: did you always guaranteed on this machine?

  Then my suggestion:

  Back up the data on the machine, the recover with the recovery CD and then the noise should be gone. If not, and if you still have warranty on this machine, so it would be better to bring the machine to a service partner for a checkup of material.

  Give some feedback if you have any additional questions.

  Welcome them

• Strange sounds coming from Tecra 9000

  I recently a Tecra 9000 it was swell until it began to Crackle. I'm 100% sure that it is not the speakers. The sound seems to come somewhere around the hardrive it self and after the ticking, the system goes to a blue screen similar to the one that you see when it crashes.

  Hello

  The strange sound could come from the HARD drive.
  I put t know how old your HARD drive is there but maybe s a beginning of the end!
  A strange rattling appeared on my laptop. After a BSOD, I wasn't able to boot up the laptop and the HARD drive was dead.
  It was a simple disc HARD head crash. Something happens after a long use of HARD drive. My HARD drive was about 6 years old.

  concerning

• Satellite L50D-B-13 q - strange sound question

  I bought my Toshiba laptop a few weeks ago and only recently did I try to watch a movie using the headphones Jack. I get the background but not the voice.

  I checked with other headphones and the same problem.

  And what's with build-in speakers? Is everything is OK when you are not using an external device?
  Have you tested with different video sources and video formats?

• Re: Satellite L40: strange sound USB

  Hi everyone :)
  First of all sorry for my English...

  I recently purchased a L40 - 17U satellite with vista home premium.

  Everything works fine, but I do not understand one thing...

  When I close the Panel/lid and computer goes to sleep/hibernate play a sound (exactly its system - as when disconecting usb). When I open the lid and computer wakes up and plays a sound too, as connection usb... but it's strange, the sound is without ALL the usb devices connected... There is no USB device connected to one of the three usb ports...

  All the works of devives (if logged in) usb very well before and after putting into hibernation, there is no problem with usb, next to that strange noise... There may be any internal device that is disconnected and connected when hibernate? It is not a RTL8187B wlan card (I found somewhere on the internet information, from a guy who has the same sound in his L40, he took off the wlan card and the noise was still there... but for this, no info on what causes this noise)

  I have in my fujitsu siemens Li2727 Office book, and there is no noise like that when going to Hibernate...

  And my question is:
  Is this normal? You have in your L40 the same? What is this mean sound?

  Thanks in advance
  Tom

  Eventually it s only a problem of Vista;

  I found this article Ms knowledge base:

  * + A USB device may no longer work correctly when Windows Vista comes out of standby or hibernation + *.
  http://support.Microsoft.com/kb/928631/en-us

  Check it out.
  Maybe it helps.

  Good bye

• Strange sound anomalies!

  Hello. I experienced a major problem during the recording of the hearing, which is probably a little difficult to explain.

  I get something, I don't know what to call it other than "black holes" in the recorded files. A few spikes of tiny that you hear the clicks are placed randomly in autour sound - when I look in the Spectrum Analyzer, it seems to be a small gap of "no sound".

  What is really strange on this subject, it's that when I Zoom in the waveform display, it seems to be nothing wrong with the audio file - no gap - no click, well observed from a distance it seems to be a little 'line' down in the waveform.

  These 'black holes' cause my computer to go crazy when I do a reading, and when mixdowns, WAV is normally just empty or white noise after that a black hole is present in the project.

  

  Another issue is strong crackling noise that happens to appear in sound files after 5 minutes of recording or more:

  

  I use TASCAM US-1641 and 2 USB microphones - I use ASIO driver - I have 8 GB of ram and an Intel E8500 CPU.

  works on Windows Vista 64-bit.

  Please help me!

  Hearing what version do you use?

  Your ASIO drivers are up to date for your TASCAM?  Is a control software for it?  If there is, try to raise the buffers on your sound card.

  USB microphones have been enough known to have questions.  Ditch these USB microphones.  The TASCAM has many microphone inputs and also uses the USB ports.

• Strange sound problem with Satellite L740 TV outputs

  I'm having a strange problem here... I googled this several times already, and I only found the same solution mentioned several times and the given solution * not * work is to me.

  I have a Toshiba Satellite L740 running Windows 7 Home Edition Premium, with a 64-bit Intel Core i5 - 2410M @ 2.30 GHz CPU and 4 GB of physical RAM. My problem is the following...

  There are two different TVs in my house that I regularly connect my laptop via HDMI cable.
  The first is mine, and I can get sound through the TV very well when I plug it in.

  Sometimes, however, I will disconnect the computer from my TV and not get any sound through the laptop because he's trying to output to external speakers to TV.

  More importantly, when I connect my laptop to my * roommate * TV (the same make as mine, you mind), I can not all the sounds of his TV at all.

  This is a recent problem. Until this morning, I was able to get noise from two TV very well and only sometimes had problems with sound through the laptop itself, which has been easily resolved by restarting.

  It's just a hunch, but it's almost like * doesn't realize that there are two different TVs * that it is connected to my computer. Maybe it's stupid, I don't know, but be it, it's frustrating...

  * ALSO: * I've seen dozens of suggestions that I put my HDMI audio as default device. Yes, I did. It wasn't the issue. Is the same to activate my audio drivers in Device Manager. They are all turned on, so it's not that either. Any ideas?

  It's a bit strange if you connect the laptop to two identical televisions and use the same HDMI cable to the TV.

  Unfortunately, it all works automatically and I put t know if you can force your laptop to recognize two TVs on the same path.

  In the worst case you have to do it manually in the sound properties > playback devices.
  If it works with four mouse clicks you can change.

  I tested my laptop with two different TVs.
  At home, I have a Toshiba TV and at the office we use Sony. On both automatically get sound on the TV speakers.

  If you will be able to find the solution please let us know.

• Satellite X 200 - strange sounds, close the cooler

  I have this x 200 for over a year now and for the last 10 days, I hear strange noises near the cooler which is located on the lower side right (the cooler in the cooler of the DVD).

  I don't know how to open this workbook for maybe clean the fan or Exchange it. It looks like a guide to disassemble for this machine.

  Thank you

  Sounds like the fan needs to be replaced.

  Is the system under warranty? I would send it to an ASP for repair. The X 200 is a complicated design and can be difficult/risky to pull out by the owners.

• Strange sound onTecra when using wireless

  Dear Sir.
  on my tecra M745 connecting to wireless internet (I use the other floor a router) and the connection is excellent 54 Mbps, sometimes a strange noise comes from the laptop, not allways: is there interference with other things (like the dect' phones, cd-drives,...)? I don't know, maybe should ask at the shop where I bought it?
  Thank you

  Hello

  It is very difficult to give a precise answer to your question. If there is a strange noise that sometimes comes, it is also possible that it may be the activity of the HARD drive or something like that.

  You hear this strange noise on speakers or elsewhere?

• "Whistling" strange sounds/noises after sleep

  Hello, everyone,

  everyone has heard this sound on the Mac? It's a short but quite noisy ' "whistle a few seconds after waking up from his sleep. It happens only once after the awakening of the iMac. Not at any other time and no not during bootup. It comes from the inside of the machine. Not related to software I see. Fan? Mysterious still. sounds pretty strange; This happens at 0:08:

  https://youtu.be/CQ471gUtLyo

  basic model of retina 5 k iMac late 2014. El Capitan, 'clean' install a few weeks ago.

  Any comments or ideas are undertaken.

  THX and sincere friendships,

  Andreas

  Hello

  It's healthy to iMessage connecting services

• Strange sound problem 1800-314

  A strange sort of wheezing sound is coming from the fan area, I suspect it's something to do with the processor.
  I recently set up a new fan (from the model 1800-914) which improved playback of DVD (no longer ignore), but the overall performance of the laptop are slow at times, especially when its been over 2 hours.
  What, if any, upgrades processor/replacements are available to me?
  How would I ask a new processor?

  Any help is much appreciatted!
  Cheers, L.

  Hello

  It may be that your old Fan has been damaged, but one simple change of another does not solve the problem.
  As far as I know Toshiba a different thermal glue do for different models and processors!

  So, it may be that false thermal scope glue causes failure even because the heat from the processor cannot be moved and the fan runs all the time!
  Also your processor can be damaged in the future!
  Normally only the same processor will work without problem in your 1800-314. Other processors can operate, but need it know for your own!

  Goodbye, TOK

• Another question of Simulator

  Hello

  I have a purchase order in my application and when I press the keyboard back button it automatically ask this question

  "Chages made!

  and with the three buttons options

  "Save", "Throw", "Cancel".

  My question:

  1 is happening only on Simulator or a real device as well because at the moment I don't have camera with me.

  2 If yes how can control this message, either stop it or change it.

  1. This will lead also in real aircraft.

  2. to avoid this message override onSavePrompt() in your screen. As:

  protected boolean onSavePrompt()
  {
    return true;
  }
  

  Concerning

  Bika

• Question of Simulator: white screen off center instead of application

  Hello

  I'm new on the BlackBerry community, the development of BlackBerry et al. Today, I downloaded the SDK to test the Tablet Simulator 0.9.2 but I already spent several hours trying to get something to run without success.

  The Simulator is installed without any apparent problems. I have read the forums today and I had none of the problems that others have mentioned, as a screen freezes or problems during startup.

  I use a trial version of VMWare Fusion 3.1.2 on Mac OS X 10.6.6.

  I don't have Adobe Flash Builder, so I use TextWrangler. I wrote an applescript script which, during the recording of my actionscript file, called a perl script (I know, sounds redundant, but it works) and fact the compilation for me as posted by Taylor Byrnes (amxmlc, blackberry-airpackager). I'm able to talk to the simulator that my output from compilation shows any errors (as far as I know), but my application appear in the Simulator without the icon that I have provided.

  When the application is started, all I get is a white screen off-center without content about it.

  I've also compiled the HelloWorld example provided. What I received was another app in the Simulator with the default icon that does exactly the same thing: a biased white screen. Whenever I have recompile a script with minor changes, the icons in the Simulator flash for a millisecond, and then I get the same off white screen.

  Someone knows something like that? Clues?

  There is obviously something I have to hurt. I can put my arguments to command-line and script if that helps. I tested my swf file in the Flash Player application and it shows. All what I have there is a red dwarf with a TextField on the top.

  Sorry for the comments and thanks for any help, you can provide.

  Daniel

  Are there spaces in folder names anywhere in the path to your project on your computer?  If so try to migrate your development to a folder that has no space in any folder named everywhere in its path.  Maybe it's not the cause of the problem, but in all cases, you should remove it as a possibility.  Windows users are discouraged to use the directory C:\Documents and Settings typical for Playbook dirs project.

  The other thing that went off to the top of some people using versions of command line is picky how the tools are.  In your command line, try using the - C option, and make sure it's between - package .bar and installApp -:

  I.e. instead of:

  blackberry-airpackager -package HelloWorld.bar -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]
  

  follow these steps:

  blackberry-airpackager -package HelloWorld.bar -C [YOUR PROJECT WORKING DIR} -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]
  

  The airpackager in the SDK 0.9.1 was picky about the order of the command line options.  I'm still not on 0.9.2 but see nothing in the notes to having fixed them thereon.

  Edit: Note; I've never had a center off white screen w/all of my command line compiling adventures, but before I got the mantra of the 'proper' command line, I got apps that showed a splash screen and then just went.  I'm on Windows (XP SP3), btw.

• Sony Sound bar question

  I just bought a bar of his Sony CT 370 that I have a TV sony xbr 65 810c if I want to have my sound bar lights up when I turn on my TV what should I do?

  Hi mars1954,

  Please use HDMI connection.

  Make sure that "Control for HDMI" is set on IT.

  Thank you

  > Joffrey

  If my post answered your question, please mark it as "accept as a Solution.

• Strange VM behavior high % USED, high IDLE, absolutely zero activity on vm

  After upgrade from 5.0 to 5.5, I see a strange behavior.  These VMS bit also clinging to 65% when using vMotion.  All are really important to the processor used and slowed DOWN.

  If I connect to the BONE, no activity of the guest.  I mean 0.0%us.  Proxies are CentOS 5.2 Linux, Jasper is Windows.  Jasper has default windows running processes and is completely idle.

  19:07:29 1 day 03:44 572 worlds, 10 VMs, vCPUs 16; CPU load average: 0.73, 0.72, 0.73

  PCPU USED (%): 59 70 54 57 51 53 73 71 AVG: 61

  PCPU UTIL (%): 68 81 64 70 56 61 82 82 AVG: 71

  ID NAME NWLD % USED GID % PERFORMANCE SYS % WAITING % VMWAIT % % IDLE % OVRLP % % MLMTD % SWPWT CSTP RDY

  512777 512777 cl-ivrproxy 8 141.94 139.26 1.16 646,57 0.34 14,05 187.08 0.62 0.00 0.00 0.00

  66472 66472 jasper (windows 7 140.34 138,41 0.04 0.11 554,68 6.78 197.28 0.37 0.00 0.00 0.00)

  438541 438541 cl-proxy 7 139.26 137,58 0.48 550,05 0.52 12.28 91.20 0.53 0.00 0.00 0.00

  I have another host with a few VM more behave in the same way.  The rest of the virtual machines on the host computers behave very well.

  The virtual Windows machine has two vCPUs and uses the multiprocessor HAL.

  Two proxies Linux are single vCPU, expect that two vCPU to see if it makes any difference, I've changed.  No difference.

  Any thoughts?

  Root cause found to be entered in the VMX files for these machines that vSphere 5.5 did not like.

  I believe that the model that was used to create these handful of machines started life as a VM Lab Manager long ago.

  As such, he had a lot of options additional vmx than a typical virtual machine, some of which were settings of mks.

  vSphere 5.0 does not seem to mind, but 5.5 has problems with them.

  Remove these seemed to solve the problem.