Another Treo 800W battery problem

Similar Questions

• BLUETOOTH to the HELP of ACTIVESYNC Treo 800w: BIG PROBLEM

  SUDDENLY UNABLE to CONNECT to ACTIVESYNC via BLUETOOTH: suddenly, last night, I am now UNABLE to connect. The Green thing running for 10 seconds approximately and then tells me "cannot connect via Bluetooth to a PC that supports ActiveSync. You can be out of reach. You want to create a partnership with another PC Bluetooth? »

  I don't quite understand... for the past month (and since I had the camera), I was able to connect. Now all of a sudden!

  Please help if possible.

  Thanks - Mike

  You can xfer files from the PC to the Treo?

  Try restarting the pc and soft reset the Treo and make sure the phone and the PC has bluetooth.

  Message is about: Treo 650 (unlocked GSM)

• Problem with Treo 800w and 2008 Nissan Altima

  I can get my treo 800w for pairing with my 2008 Nissan Altima, he tells me again my battery and the singal strength, I can even answer the calls. But when I answer a call or make a call you can not hear the person at the other end, nor they can hear me. I know that this is not a problem with the car, because the other phones work very well. Please let me know if there is a fix for this or if it's something in the works.

  Thank you

  Rodrigo

  So I went to the dealership and they were basically looking at my like I'm a fool. They said that they could not do the update, because they have never heard of him. I went home and called Nissan Bluetooth support and they told me that I have to buy Navigation DVD 7.4 in order to get the update. The price is $ 299 at the dealer and $190 of navteq. So I asked the guy to support if I buy the drive on mine it will fix my problem, he said no because when you buy the merchant, they will check your system to make sure that it is compatible with the new dvd navigation and perform the updates. I think its crap they have simply not do the update with the charge me for a new navigation dvd. The tech support guy remind me and offered me a work-around to get bluetooth working on the car. This isn't the best solution, but it works. Basically, pair you the phone and make your call. When the call is in course/ringtone, click the button on the screen to switch to your device, that it will be set on your phone. Then click phone on the wheel button, and everything will work correctly. I tired it and it works. This leads me to believe it's a problem with Nissan and not WM, but I'm not an expert.

  Message is about: Treo 800w (Sprint)

• Treo 800W Yahoo Messenger problem (unsolved problem)

  I contacted Yahoo about the problem of Messenger on the phone reading a (error 500 - Server is not available) and they said that it wasn't on their end and that sprint would have to tech the problem, their software / call them.

  However, after a long and tedious call tech to sprint, they were unable to resolve the problem and put it on the list of "pending issues".

  AIM and MSN messenger to start properly and the connection, however, Yahoo has this 'error 500' message every time and don't ever work even if the phone was totally given to zero with the help of technology. My yahoo account has been verified for checking the connection by online technology and was fine.

  Someone has this problem and if so, is there any resolution out there yet? I really want to communicate with friends across the country over my day, and unless it is resolved I have that access.

  Thanks for reading

  Nothing seemed to work with the original name of Yahoo I held long and can connect using the Web on a pc, but not with the phone. When a new ID has been created for the web and the phone pda gained access. Had to be something with the configuration on the end of yahoo with the old name.

  Problem solved! Thanks for the suggestions folks when you fell, you're alone, trying to solve a problem like this its great knowledge is out there who care enough to help out.

  Message is about: Treo 800w (Sprint)

• Battery status icon disappeared on my Treo 800w

  Hi all

  My battery on my Treo 800w status icon is missing on the top of the screen.  Where it's going and how do I get it back.  mysteriously, it was replaced by a volume icon.  I've looked everywhere to try to recover.  This is probably a simple solution?

  Hard reset.

  Message relates to: None

• WiFi not appearing icon does not treo 800w

  My bluetooth icon and the phone display, but the wifi does not work someone can direct me on how to solve this problem?

  I called and set up a technical for calling me and found support as the TREO 800W (#1 replacement) is defective.  He apparently has a 'defective radio '.  The tech walked me through a hard reset and that was supposed to be the fix, it wasn't.  The Palm experience is depressing that I just got this phone as a replacement for a TREO 800W purchased in October 2008.   Another replacement is ahead.

  I have no idea what the problem with the first phone was except that she would charge is no longer and the replacement works with the original charger and battery.  The phone that is shipped on January 8 will be the third phone in less than 90 days.  I am not satisfied with this phone.

  Message is about: Treo 800w (Sprint)

• Treo 800w not found in Device Manager and does not connect to ActiveSync

  I just got my Treo 800w and I have ActiveSync it once.  After that, I had a lot of trouble trying to get activesync to say that it was connected to the computer.  After doing some research on Google and help forums looking around, I discovered that the Treo should appear in my device manager when you are connected to the computer.  I went to my device manager and of course, it wasn't there.  After a lot of time trying to make it work, I found that the best thing to do is remove the battery and plug it in again.  Then the computer will find again.

  However, I also learned what was causing my problem and I don't know if it's a windows or a problem of palm, but it is a question.  If you connect a Treo 800w on a WinXP (I don't have Vista so I don't know if this problem exists) and even if you touch it connected the power button on all Windows POPs a message saying a USB device has malfunctioned and will cease to recognize the device.  I then told my wife (the main user of the Treo) to never touch the power button and even less the Treo at all while it is plugged into the computer.

  If this question has already been posted... I'm sorry that I'm not looking for it...

  If you read my entire post it says I already found the solution.  Try all the things you listed didn't work for my problem.  I write only because I believe that it is a bug/problem with palm or windows and the device.  Take the battery, put the battery back in, and reconnect the unit is the only thing that works.

  I also tried to uninstall ActiveSync, reboot, install ActiveSync and the battery... it works too, but it's much faster to just remove the battery then put it back and reconnect the device.

  To answer your other question on ActiveSync Yes, I've got 4.5.

  Message is about: Treo 800w (Sprint)

• Satellite P300-172 battery problems

  Hello.

  Hope you all had a good Christmas and can hopefully help out me.

  I bought a laptop P300-172 awhile back.
  Now, even after the sinking of a large number of power settings, the battery life was poor.

  So I ordered a replacement from ebay (part 3rd battery) the battery is identical to the Toshiba battery in everyway of course the only difference is there was not an a toshiba.

  in any case, when the battery arrived I plugged it and the battery LED came on to show that he was charging, when I booted up my laptop (with vista) windows showed that there was no battery connected, I thought strange. But I did back and let it load, after an hour or two charging orange led started flashing which it never did.

  Still, I booted up vista and windows showed there is no battery connected. I have contcated the seller and assumes that the battery was faulty, as chance would have, he repaid the article and I went back to the normal toshiba battery.

  I had another battery, ordered through work and that is identical in every way, once again, except that it was another 3rd party battery and which does exactly the same thing.

  Can anyone help?

  I've updated to the latest version of the BIOS (3.9) and have tried many steps as leaving the laptop without the battery for 30 minutes and then insert the battery. update the bios.

  Well that's about all I can think and have read through the forums.

  I appreciate may give any information you guys! Sorry for the long message.

  If I were you I wouldn't assume more battery problems and return the phone to the place of purchase, if you can.

  The problem is out of your control, as you have tried multiple batteries. Just give him place of purchase to watch. Then less grief for you.

  Good luck.

• EliteBoook HP 8530w battery problems

  I am running Windows 7 Professional on my Elitebook and having battery problems.

  What happens when the computer is plugged into the wall it will load and allow for laptop turn on or stay even if the battery is removed.

  If it's just the battery and not cap it not turn on or cut the power, if it's on.

  The battery is relatively new, I just replaced 2 months ago.

  Recently, I did a clean install of Windows 7 in 3 weeks when this problem started to occur. I had the battery works for a week or so, by removing the drivers for the battery. However, I have reinstalled the drivers yesterday for the media card and all of a sudden the battery does not work yet. I tried to do a system restore to before installing the drivers card media and it does not work. I tried to remove the drivers for the battery again like last time and that did not work.

  I installed HP Battery Check and it says that my battery is ok.

  If anyone can give me a help any with this problem I would be very happy! Thank you

  If you would like more information on the computer, please do not hesitate to ask I'll try to provide it.

  You are so very welcome Jobbernowle!

  The battery has a part number or product number on there?

  To be honest, since the battery worked when you installed it in another laptop that implies, for me, it works.  As a general rule, this means that the connection of the battery to the laptop was having problems.  However, normally in this case the battery is not recognized at all.

  So, I would like to confirm that the battery is recognized when you have the laptop on the sector.  You mentioned in your original post that the battery check said, it was beautiful, but I would like just to confirm once again.

  Have you tried updating your BIOS to the latest version?  It is a good step to take in material related to issues like this that sometimes the BIOS can have strange problems.  In my opinion, This is the latest version of the BIOS.

  Let me know the result.  I'll be waiting for your response.

• camera battery problems

  I have a Canon EOS T3i rebel who has not had problems over the years I've had up to now where it will not recognize a fully charged battery.  I have an extra battery and have tried both after recharging the.  I can get off a shot and then the red light turns on and doesn't let me go ahead.  I take the battery, re - insert and it will give me another shot.  On the screen the battery icon shows a fully charged battery.   Help.

  Thanks for the help on this site of problem solving.  It turns out that someone recommended checkinh map as the red light indicated to write to the card, more battery problem.  I'll definitely keep this site for future use.  Thanks again

• Treo 800w cannot assign OneNote to hardware button

  I just upgraded to a 755 p of a Treo 800w (after owning a 650, 600, Palm Vx and Palm Pilot before that).  For the most part, I was very happy.  Frankly, the only real issues I had have been with Windows Mobile Device Center.  The rest of the transition has been very well, except the YEARS of change of habits.

  Here's my question.  I am trying to assign OneNote Mobile to a hardware button, but OneNote is not in the list of available applications to assign.  Other ROM apps and installed applications are present, including other Office Mobile applications, simply no OneNote.  This could be the cause of this problem?

  Here's what I do: go to start--> settings--> personal--> buttons.  Click on the button I want.  Search in the "assign a program:" drop-down list.

  Thank you

  David

  The OneNote Mobile icon is in Windows/Start Menu/Office Mobile. I copied the icon OneNote Mobile for Windows/Start Menu/Programs. OneNote then appeared in to assign applications.

  I didn't have to do this before because that Word, Excel and Powerpoint all appeared in the list of applications to assign and their shortcuts are only in the Office Mobile directory. Guess I need to think outside of the box on Windows Mobile...

  Message is about: Treo 800w (Sprint)

• POWEREDGE 2800 memory/battery problem

  Hello

  The server DELL POWEREDGE 2800 our company with windows sbs 2003 suddeenly server has restarted yesterday and stuck in the POST gives the error"

  Memory/battery problems were detected.

  The adapter has recovered, but cached data have been lost.

  Press a key to continue. "

  I have three times restarted the server by pressing a button to continue. All three time loading of bones preserved for a long time and restarted the same screen of the error.

  ATLAST I turned off the server and checked for any loose contacts according to the suggestion of dell. I removed the disk 0, 2 HHD, HDD3 in channel one o and replugged in and started the server. Same system has occurred. 1 HARD disc is already failed in RAID 5 and the place so that the disc is empty, I suspected may be another disk HARD in the same row is a failure and so I removed HDD 0 and rebooted the server. the same symptom (2003 loaded and stuck). turned off the server ' reconnected HDD0 and removed HDD2 and restarted the server, but the same symptom.

  Reconnected the HDD 2 and disconnected HDD3 after restarting the server, it gives error loading operating system.

  There are disk HARD 4 and 5 two more hard drive HARD drive in another channel 1

  How to recover from this problem and our secure server data?

  Please help me with this because I'm helpless and the server must be brought im production tomorrow

  Thank you & best regards

  Margot

  If your LCD is blue and you get the error of memory/battery on each startup, then you need to replace memory RAID (99% chance that it is rarely a defective battery or the riser).  The operating system will not usually start in this scenario.

  If your LCD is amber and a message about the scrolling ROMB battery voltage, you should replace the RAID battery (sometimes it's because of riser).  The operating system will usually start and work very well in this scenario.

  First of all, stop playing with readers and replace the memory RAID (and battery and lift to be 100% sure).  Once it is replaced, due to all mixture player you have done, you might have a few steps very careful to recover your data and make your table online.  When you're ready to do this (again, it is useless before repairing the message memory/battery), call Dell technical support - it's always free on servers, regardless of the status of the guarantee.

• Battery problem. How to reach 100% battery?

  Seem to be able to have 100% battery power, have message when click on the battery icon of "battery 50% available (plugged in, does not support).»   How to reach 100% battery?

  Hello

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  ================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Treo 800W Wifi - possible to force the Wifi to stay on?

  Is there a way to keep the WIFI while option in the Office with the Palm Treo 800w?

  It turns off when the screen saver is activated.

  What is a power saving option.

  Thank you

  Hi milani,.

  Welcome to the Palm Forums. The default setting is for WiFi turn on whenever screen only. It is an energy saving feature. The theory behind this is the following: If the screen is not on, then you probably don't have a connection because you aren't interacting with the device.

  That being said, you can disable this feature. Click Start-> settings-> connections-> WiFi Prefs tab. On one of the tabs (I think it's power settings), there will be an option for always.

  I highly recommend NOT doing, your battery life will collapse, but the option is there if you still want to continue.

  Message relates to: None

• Treo 800w - Internet access?

  Hello

  I'm a newbie in the world of mobile wireless.  I am unable to connect to the internet using my Treo 800.  It always shows a message, "cannot find the page.  Check the spelling. "or something like that.  My spelling was correct for Web pages.

  Is the internet connection through my wireless phone, or do I need to be connected to Wifi?

  Help, please!

  Rebecca

  Hello!

  As long as the phone has been correctly supplied by Sprint, all you have to do is turn on the raidio cell and go in internet explore for your internet needs.  WiFi is another option, but it's another option to connect to wifi access points.  The Treo 800w can do both cell and Wi - Fi for internet.  Try a soft reset of the phone, turn the cellular radio back to see if that does the trick.  Also make sure you have a suitable signal coverage and the wifi or the radio cell is running while waiting on you desired method of connectivity.

  Message is about: Treo 650 (unlocked GSM)