Another way to adapt to the question on the page

Similar Questions

• External hard drive does not work. Is there another way I could solve the problem without formatting the external hard drive?

  My external hard drive works. I tried to plug and when I tried to open it, it says to format the drive until I could use it. Everything works well as when I plugged the USB icon shown on the screen. When I check the disk management, it showed that the partition of the drive is there.

  I tried to change the drive letters, but still having the same problem. I also tried to run the disk check on the command prompt and the properties of the drive, but it still can not because there is error popping up saying that the disk check cannot be performed because Windows cannot access the disk.

  Is there another way I could solve the problem without formatting the external hard drive?

  I tried the first step in troubleshooting the hard drive, but it gives a
  error in saying that "hardware changes might not have been detected.

  So I tried the second method, and when I click on the "Check now" button his
  gives an error saying that "the disk check cannot be performed because .
  Windows can not access the disk".".

  So is there any other way or option?

  Thank you

  Jason

• My Visa has temporarily suspended my account; is there another way of payment as the cheque?

  Original title: billing

  My Visa has temporarily suspended my account; is there another way of payment as the cheque?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_programs/Windows-phone-number-for-billing-Dept/e35c95d4-2746-E011-9BAC-78e7d160ad4e

  UTC/GMT is 19:37 Tuesday, December 6, 2011

• Is there any way to "adapt to the size of the image" a bin of clips?

  I run a 1920 x 1080 doc project in first Pro CC with a range of sizes and types of media.  I purposely do NOT preset preference "default scale to the size of the image" to maintain the quality of my still image data base to allow pans and zooms.  I imported since, connected and sub cut a very large number of 720 x 486 QT stock of archive films.  After doing without presetting of the first scaling by default, I am experiencing now to apply "scale to the size of the image" to each edition in my sequence that I work.  Is there any way to "adapt to the size of the image" my bin of clips? or am I now stuck having to convert the original movies to 720 x 486 QT 1920 x 1080 and then reissue of links in first to keep all my data void cutting?

  What is in the bin, select the clip, remonter back towards the top of the screen and next to file and editing, select Clip

  Then go down to video Options

  Choose scale to the size of the image

  who do you want?

• 8600 AIO will not adapt to the page of sites like mapquest maps.

  Don't know what happenend, everything was fine, but all of a sudden my 8600AIO will not expand or adapt to the cards that I am posting on the websites of the page.  Even large maps on Mapquest print on a 4 x 4 block on a sheet of standard paper.  There is no settings I can change to expand or adapt to the page.  All of the suggestions.  Thank you

  Hi rrstu,

  I want to help you to be able to print with did it to page and/or expand features. I have a few questions to help us.

  • What browser are you using, and have you tried another browser?
  • When you print, you choose file, print or you choose the small printer icon on the web page that gives you the easy to print?
  • Please guide me through the steps you take to print.

  I have played around with Map Quest and Internet Explorer and have found a way to make it work.

  In fact, I had to, click the printer icon little, not file print, and then click the new window/tab, I pointed out the map, click file print preview and changed the settings. Settings the most important was to choose as selected on the screen at the top. For the card that I'm viewing the best settings to use is the landscape, and basically, you need to change the size according to your needs. Adjust makes it seem small for me, I changed it to 150% it it looked perfect. Basically, I don't think it's a problem with the printer, I suspect that the problem is related to settings in the program you are printing from.

  To test the printer, you can make a copy of the front and choose the option to enlarge the image. If it works we know that's not the printer at the origin of the problem.

• What is the best way to deal with the pages being removed from the site in British Colombia?

  A customer wants a page removed from their Web site; What is the best way to go about removing/deleting a page in British Colombia and keep all attributed to the laid-off page SEO ranking?

  Should I delete the page and then add URL redirect via the module to redirect BC a relevant page.

  or

  I have to keep the page alive but 301 redirect using the property of the redirection page 301 in addition to Options?

  One is better than the other?

  Redirect via the page is there if you want to keep the page for any reason content wise, etc. in the admin. Web site wise is no different. A 301 redirect is a redirect 301 Grant, there is no difference.

• is there a way to check if the page request was made by specific URL?

  I need locking a page so it responds only to when a form is sent to our payment gateway

  Is there a way to check WHO sent the page request

  That is to say. If the page request to was provider of payment process form

  I'm already check if the form fields are valid by xreffing with our own details

  I check if the request was for the HTTPS version of our page

  I would now like to check whether the application was the URL of our payment gateway

  I use cgi.remote_addr and check the IP address, the only other thing you can use is the sponsor, but that can be easily spoofed.

• Problem of adaptability of the pages

  I just download Muse and really enjoy. I created a basic Web page and everything works well except when the browser window is closed down the width of the page below.

  He begins to collapse the page but everything gets mucked up. The pictures start to collapse with each other, the text is closed until the site appears truncated.

  What have I done wrong? I thought that the program will create a site that is adjustable so that it could be used on any browser size or laptop.

  Any help appreciated

  Hi Vincent,.

  I suggest that you go first through this tutorial links that can guide you better in understanding Responsive Muse.

  • Responsive web design in Adobe Muse
  • Create a sensitive site with Adobe Muse
  • Construction of a sensitive site in Adobe Muse | YouTube

  After watching all the links now start creating your website once again, I hope this will help you a lot.

  Kind regards

  Ankush

• I read the messages on the screen split prooblem I have. I read the posts and I do not have the separator module of fox. Is there another way I can eliminate the split screen?

  I have firefox installed on both computers. The office displays not the split screen, but the laptop don't. I checked the posts and I have not the separator module of fox but still get the split screen when I click on a second site.

  Firefox has no built-in opportunity to split the screen. There are several add-ons that can split the screen to solve this to know what originally, using the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  Another possibility is that you have a few set bookmarks to open in the sidebar. If this only happens for a few bookmarks, right-click on the bookmark, and then select Properties. Make sure that the "Load this bookmark in the sidebar" option is not selected.

• How to use SQL or another way to check if the assets have been post GL?

  Hi all:
  I wan to ask, how to use SQL statements or any other way to check iif assets have been post GL?
  
  
  my environment is oracle 11.5.9
  
  
  
  
  
  
  Concerning
  Terry

  to create entries and transfer to GL
  assets: -.
  (1) (log N entries)-> standard
  (2) complete the setting and submit.

  to check if the assets have been post GL
  Journal:--
  (1) magazines-> Enter
  (2) in the form of research journals Source LOV, select 'Assets', then enter
  (3) you will find all transferred assets (Addition or depreciation) magazines, and the status of the batch is (Unposted), then review and Post

  Published by:! ALotfy September 2, 2010 08:54

• Is there a way to only show the pages with a color label?

  I'm working on a document and I have several pages with colorful labels (gold, blue)

  I ask if there is a way not to show my pages gold for example, so I have an overview of these pages?

  Thank you

  There is no ability to filter these pages.

• Is there a way to detect whether the page is in edit mode or not? [Toilet frame]

  I can't find any bean system to provide this information. If anyone knows, it would be very useful.
  
  
  It comes to Webcenter Framwork (no space). and by "edit mode", I hear when the user press Ctrl + Shift + C and the blue dotted lines appear.
  
  
  Thanks in advance
  
  Published by: Chris_Jo on January 25, 2012 12:16

  Suite EL will do what you want:

  #{composerContext.inEditMode}
  

  In other words, the composerContext bean is available even in a WebCenter portal application. If you take a look at the default template (pagetemplate_globe.jspx) that is created when you create a portal webcenter application. On line 16, you will see an example of the use.

  Edit: sorry... I didn't know you meant method of contribution...

  Change the mode is by pressing ctrl + shift + e
  CTRL + SHIFT + c is called contribution mode...

  I just looked at the source code of the content presenter taskflow and this is what they use to show the dotted line:

  inlineStyle="#{composerContext.subView == 'contentContribution' ? 'border:2px dashed blue' : ''}">
  

  So I guess that #{composerContext.subView == "contentContribution"} will return true if you're in input mode. This should work as well in areas such as framework.

  I hope this helps.

  Published by: Yannick Ongena on January 25, 2012 20:10

• Other ways to access to the control center

  I'm a quadriplegic and can't touch to the iPad, but I use the switch access. That leaves several things that I can't because you have to do some kind of shot or another action.

  I was trying to find another way to bring up the control center, since I can't slide with my finger. I actually found a several months ago and put in a recipe under switches, but something went past and disappeared and I don't remember what I did. Any ideas?

  Also, I need to be able to implement all applications running in the background that must be killed. I can't double click on the home button. It any suggestions?

  I use the command with 2 switches. If that helps anything.

  Thank you! -Doug

  Hello WDMaples,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to access all the features of your iPad, and I have an article that should help you to implement the control you are looking for with your switch access. This article should help guide you through setting up the recipe to replicate hitting swipe and double click on the home button.

  Switch control: Basic Techniques

  If you experience any problems or have any questions, please let us know. The entire community is here to help.

  -Best regards-

• HP Split: Port HP Split HTMI spoiled, any other way to connect to the external display

  HTMI HP Split connector seems weak and unable to detect the external display. Troubleshooted HTMI and HTMI port to the monitor cable to be ok. May need another way to connect to the screen, otherwise repair port (don't know not so easy to fix). Enjoy the century lights.

  2 way possible. There is such a thing as a usb adapter to HDMI.

  http://www.Amazon.com/cable-matters-SuperSpeed-adapter-2560x1440/DP/B00BPEV1XK/ref=sr_1_2?ie=UTF8&QID=1428145993&SR=8-2&keywords=USB+to+HDMI

  USB 3.0 models provide a very good experience. Also if your laptop has the right hardware (Intel processor and wifi card, usually) you can use WiDi (Wireless Display), but unless you connect to a Smart TV with built-in WiDi you need a WiDi adapter.

  http://www.Amazon.com/NETGEAR-Push2TV-wireless-Miracast-certified/DP/B00904JILO/ref=sr_1_2?ie=UTF8&QID=1428146112&SR=8-2&keywords=WIDI+adapter

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Page background to adapt to the content of the page.

  Hello!

  I would like to know how it is possible to make the background of page resize based on its contents. Here is an example of what I'm trying to achieve:

  

  Thank you! I really appreciate your help.

  (A) open the "rectangle in master" layout page, place a block of text above, start a preview of the browser and minimize the browser window. All work as expected.

  It is best to place the rectangle on the page layout (instead of the master page), because if you resize items that should remain in the bounding box, or if you add items, you must resize the bounding box in page view.

  The dynamic adaptation of the size goes on your finished page or in preview mode.

  

  (B) another way to reach a height of actual dynamic page:

  Open your setting in page (and not his mistress), open the "Page/Page Properties" menu and uncheck the option "Sticky Footer". In this case, the page height is not determined by the height of the browser window, but by the content of the page. In other words: move or items down will push the bottom of the page down as well (that long these element are not specified as "Footer" elements).