W520 Trackpoint dead, pad and lower buttons OK - reinstalled Driver/utility

Similar Questions

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• Dynamic action on upper and lower region button

  I have a dynamic action where when I click on my first button (add a LINE) I want a 2nd button to be disabled (DELETE).  My second button as the button position "Up and down the region", so that the button is displayed above and below my report.

  After you create the dynamic action, when I click on my first button (add a line), the top of the page button DELETE is disabled, but it does not neutralize my button at the bottom.  When I set up my action dynamic and he say what button to assign, it only shows a button in the list of the button (MULTI-RANG-DEL).  In other words when I set up the button like "Up and down the region" it does not show 2 as the selection in dynamic action buttons, one button.

  So how can access this button down in my dynamic action?

  Using APEX 4.2.4

  Thanks in advance!

  John

  jfosteroracle wrote:

  I have a dynamic action where when I click on my first button (add a LINE) I want a 2nd button to be disabled (DELETE).  My second button as the button position "Up and down the region", so that the button is displayed above and below my report.

  After you create the dynamic action, when I click on my first button (add a line), the top of the page button DELETE is disabled, but it does not neutralize my button at the bottom.  When I set up my action dynamic and he say what button to assign, it only shows a button in the list of the button (MULTI-RANG-DEL).  In other words when I set up the button as "The top and bottom of the region", it shows 2 buttons as choices in dynamic action, a single button.

  So how can access this button down in my dynamic action?

  Use the property Class CSS button button to add a class name (for example delete ) for the button. Change the DA Sélection Type selector to jQueryand jQuery Selector to something like button.delete (the exact required selector will depend on the template theme and used button).

• Where are minimize them, fullscreen and exit buttons?

  The reduction, full screen, and exit buttons are completely absent in Firefox 29.0.1.
  Also I am not able to customize the icons in the toolbar, the way I like them. For example, I like the page refresh/stop button to the left of the window loading url. Other tool icons are missing too.

  Have you tried to activate the title bar as well as (in the screenshot, button from the title bar on the lower left)?

• Portege R930 - Touch Pad on / off button does not work

  Hello

  R930 nine (PT330A) and a minor but annoying thing... the small button above the touch pad and below the space bar for the Touch Pad on / off does not work. I can't find the configuration options for this anywhere. Fn + F9 works very well.

  Not much, but I like things to work! And this button would be very convenient for a quick switch.

  Thank you
  Mark

  Can you use the Toshiba? I think you should have the button eco and presentation on this machine.

  Check please if you can enable/disable these keys in the HWsetup tool.
  I don t have Win8 machine, but I think that all these buttons can be enabled/disabled.

  Please, check and send comments.

• New back button and reload buttons

  That happened with the "back" button and the button reload.

  The "back" button and the next button used to have a little low if clicked would display previously cached pages. Why I don't see this more. I can't find any where to install it.

  The button reload and stop button are now moved to the right of the page and I want to bring it back to the left. Is it possible to do this?

  I am running Firefox 4.0.1

  Drop-front/rear marker
  
  The drop-down list marker was removed from the Back/Forward button in Firefox 4.

  You can do one of the following:

  • Click the previous/next button to display the drop-down list
  • While on the front/rear button, HOLD down the mouse left click pressed until the drop-down list is displayed
  • install this module to add the marker drop-down list on the previous/next button: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/

  Stop/Reload buttons
  
  Firefox 4.0 has a Go/Reload/Stop combined button that is placed at the right end of the address bar.

  • During the process of loading page it shows as a stop button and once the charging button is replaced by a reload button. If you type in the address bar this button would then become a button go.
  • You can middle click on this button to duplicate the current tab in a new tab.
  • In Firefox 4.0, you can move the Stop/Reload button out of the address bar and put them where you want on the toolbar. You can also make it appear as separate buttons on the toolbar.
    • Open the window to customize the toolbars to move them out of the address bar.
      • Click the Firefox button > Options > toolbars
      • If you use the Menu bar: click on view > toolbars > customize
    • Swap the two buttons or move them to their previous position to the left of the address bar.
    • If the order is 'Reload - Stop' to get a combined "Stop/Reload" button.
    • Switch the order to 'Stop - Reload' or separate them otherwise to get two separate buttons.

  You need to update the following:

  • Adobe PDF plugin for Firefox and Netscape
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
     • There are links to tests specific plugin available on this page:
       • http://KB.mozillazine.org/Testing_plugins
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• How do I output up to 8 high and low?

  Hello

  I'm still new to Labview, and I can't seem to find a way to do something fairly simple.

  I have a device that has 8 entries, and each entry is "lit" by providing a high signal (5V).  I would like to use Labview to provide that these high and low signals to these 8 output pins.  An additional intracacy is that each channel will have to be activated or deactivated by pressing a button of Labview.  What commands/functions labview I should use to provide this feature?  Are there related examples in Labview or online?  Thank you very much.

  I use a NI 9401 to provide these 8 output channels.  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/208809

  John

  You can search for examples on how to produce digital signals.  Go to help - find examples and numeric type and get labeled examples "write dig Chan".  There is an example that will run on the 9401.  Then, you can adapt it for your use.

• Print dialog box low buttons are hidden Windows 7

  When I try to print something from Adobe Reader X low buttons of the box print dialog are cut off or are hidden behind the taskbar. He won't let me not resize the print dialog box or even move. This also happens when I try to print something from some sites on the internet as if I try to print the postage on the USPS site. I don't know if this print dialog is part of Windows 7 or Adobe Reader X, I asked this question twice before, but because I mentioned it was problems with Adobe Reader X is perhaps the reason why I have not received a response yesterday when I posted two questions? Are there people from Microsoft are working today to answer this question?

  I just got done uninstall X drive and installed the previous version of 9.4 and the dialog box is returned to normal and it works fine. I don't know why the version X did this on my computer and a few others that I see after reading some forums. It seems that the problem is not due to an operating system or another. Or it does not seem that it is a kind of brand of computer. I now wonder if I should try to reinstall drive X and see if the problem persists. I don't think that a clean install is desirable because I think that my computer came with 9.4 and automatically installed the new X version without my permission?

• How to disable a license of Windows 7's Home Premium on a dead computer and activate the replacement

  I had bought a copy of the Family Pack Windows 7 Home Premium Upgrade retail and had activated the license on 3 computers. One of the computers suffered a power surge and had to be replaced. I did and installed a copy of Windows XP Professional, I had and then installed the upgrade to Windows 7 but it does not allow me to activate Windows now indicating I had exhausted the licenses. How can I deactivate the license on the computer now dead and transfer it to the new?

  No need to just remove the hard disk from the dead computer and if the drive is still functional:

  (1) copy the data files, you can keep.

  (2) to format the drive for someone else cannot retrieve your product keys.

  Now before you do the steps above after activate Windows by phone.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• The fence, restore down and minimize buttons cut with any theme I use on Windows 10.

  Hello

  A little history: I've always been a user of Chrome and thought I'd give Firefox a test desktop because mobile is so much faster than Chrome on mobile.

  Now to the question. I have 10 windows, and I use the latest version of Firefox. Now, every time I install a theme from the Firefox store, the close 'X' and restore buttons get cut and reduce the button is completely invisible. This is aa a few screenshots of different themes:

  http://imgur.com/qltW96u
  http://imgur.com/NqFENd3
  http://imgur.com/xqIuePc

  I read some posts similar to mine, but they related to Windows 7, and the suggestions he had to change the theme of Windows to the default. I did that as well, with no luck.

  Everyone knows these issues? Does anyone know how to fix this?

  Try setting browser.tabs.drawInTitlebar to false on the topic: config page to disable the display of the tabs in the title bar.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Close, minimize and resize buttons are inactive on the main window

  My email client is the beta version of 41. I just upgraded the sys op to version 10 of Windows version 7.

  The close, minimize and resize buttons are inactive on the Thunderbird main window when running on Windows version 10. These buttons are active on other windows such as the address book and new message. Ctrl W keys work on the main as Alt and then exit.

  Is there a reason that the buttons are inactive on the main window?

  https://support.Mozilla.org/questions/1082823

• Who ask us to Mozilla to bring SPACE and SEPARATOR buttons?

  Having to use Classic theme restaurateur is a drawback that brings other unwanted changes. We are only talking about the addition of a space and separator button. I understand the desire to refresh the appearance of Firefox, but some options of customization should be left alone. It is more difficult to be a loyal user when you constantly have to implement workarounds. Thank you.

  Note that flexible space and separators are still supported in current versions of Firefox.
  They are not present in the palette to customize and you install or activate an extension like CTR for the present in the palette to customize.
  Once you have trained in a toolbar, you can disable the CTR then you should still see these items in the toolbar (but is no longer in the palette to customize) after you restart Firefox.

• Minimize, maximize, and exit buttons are not on the theme.

  I installed a theme on Windows 7 and minimize it, maximize and exit buttons do not have Firefox, even with the default theme.
  Is it possible to make the keys not linked Windows, or simply corresponding to the theme?
  Imgur mirror: http://i.imgur.com/FSEJFH9.jpg

  Well, this is not possible. Minimize, maximize, and close theme button is defined by the system, or in your case Windows. So, if you want to change this theme to match with Firefox, you will need to change the theme of windows by a correspondent.
  Using the default windows theme is recommended for good match because the theme designers create their themes as standard. so, it must match each theme of Firefox. Using the default minimize, maximize, and close windows theme will perfectly match with the theme of your browser or change your theme of browsers to match with the theme of the system. Anyway your choice.
  Thank you.

• How can I add a right click Menu mouse to click 'CANCEL' * and * "REDO" button to change the text in Firefox?

  How can I add a Menu with the right mouse button to display a "UNDO" AND "REDO" button to change the text back in Firefox without losing or forgetting the changes as I can under Google Chrome? -OMG I told dinnt - SORRY!

  Glad you stuck with this issue cuz I pulled a real boner trying to fix. I was totally distraught on the main menu of * two * UNDO and REDO. If you remember that I tried to install the menu shortcut for UNDO them and REDO and totally rejected the idea that they might be under Edit on the crazy Main Menu which of course, they have been and worked like a charm. THANKS again man, you are a true hero!

• iPhone5s, about 3 years. My phone was in place. Whole phone freezes up and I have reset ("home" button and lock button)

  I have an iPhone5s for about 3 years now. My phone has been in place for some time now. My phone just hangs and I have to reset ("home" button and lock button) and when I unlock it after ALL my messages have disappeared or erasing their own messages and I get not notified when someone texts me. Help?

  Reset.

  Restoration.

  Restore as new.

  Standard troubleshooting steps. Have you tried one of them?