Answers shows the dimension columns and separate hierarchies

Similar Questions

• an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  Hi mdsavol,

  Your observations are accurate. The 'suggestions' are previous entries in the same column that correspond to what has been entered so far in the active cell. The only direct user control is to activate the function turn on or off in numbers preferences > general.

  There are other ways to include or exclude items of suggestions:

  • To remove typos in the suggestions list, the user must correct the typos in the cell above the active cell. If they are more in the list, they won't be presented as suggestions.
  • To include selections added to the list, the user must enter these suggestions in the individual cells above the active cell and column where they are wanted as suggestions.

  There was a request here a while there is a list of suggestion 'live' similar to those of some websites, which offers a descending list of possible entries as a type in an input box.

  The only way I see to reach a solution similar to what you have asked is to use as many lines at the top of the non-en-tete of the table section to list the items likely to repeat in your table, and then hide the lines. You'll need a list for each column where you want to use this feature with a list previously planted. Existing items will then require a likely hit up to three, then a click to choose from a list small enough to enter a value into a cell. News he will need to enter in full the first time, but after that it will be put on the list and answer the same thing as the terms preseeded.

  While your setting upward (or decide not to do), consider going on the menu of number (in numbers), choosing to provide feedback from numbers and writing a feature in Apple request. Describe what you want. Explain how he could help the average user numbers, and then hope for the best.

  Kind regards

  Barry

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Now, all the applications on my Mac air show the same icon and doesn't open, please help!

  I did a quick cleaning on my Mac and now all my applications show the same icon and does not open! TIA :-)

  "quick clean up"...

  It seems that you may have removed some system files, you shouldn't have.

  If your Mac is running v10.7 Lion or later, you can restore OS X using OS X Recovery.

• Problems to show the driver IVI and property loader error messages when you use a type of operator interface

  I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

  Hello, Johann,.

  I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

  concerning

  Samuel

• I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu.

  I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu. I'm on a Mac Pro 2013. Latest version at all.

  Looks like without the audio element is a nested element.  You will need to restore the audio signal in order to see the wave forms.

  I have the same problem (sometimes):

  https://forums.Adobe.com/message/8527998#8527998

  Without rhyme or reason, as far as I can tell.

• Hi, I'm in the Brazil, I wanted to buy the student cloud criative adobe because of the promotion, but when I bought (the website to direct me to the links showing the promo together and how it has 60% discount) and when I click on buy in fact the prod

  Hi, I'm in the Brazil, I wanted to buy the student cloud criative adobe because of the promotion, but when I bought (the website to direct me to the links showing the promo together and how it has 60% discount) and when I click to purchase the product, it says its not available in the Brazil and I don't not knowwhat to do , because the site says it has here, so please help

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Places http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf

  -Adobe resellers http://adobedealreg.force.com/PartnerSearch?lang=en

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• I installed photoshop CS4 on a new PC with the original CD. Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target". Thanks for your help!

  I installed photoshop CS4 on a new PC with the original CD.

  Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target".

  Thanks for your help!

  

  As you can see, you are using version 5.0, who can't stand still not instant in it.

  Please check for updates in Photoshop > help.

  Concerning

  Sarika

• In our application, we RESUME Builder and after, we want to show the pdf format. and also, we want to save and send option.

  In our application, we RESUME Builder and after, we want to show the pdf format. and also, we want to save and send option.

  1. for the PDF see TCPDF

  2. for the record, see PHP insert data in MySQL

  3. to send see Basic PHP mail() code function to send e-mail from a form. InMotion Hosting

• Animate FancyBox iframe in Edge - do not show the correct height and width

  Hi all

  Can someone please provide advice or a solution to this problem.

  I tried to use the edge Fancybox.js animate to call an iframe (as a pop up album).

  However when I try this it does not show the correct height and width properties - even though I am their definition.

  When I test this on my hard drive it works fine in Chrome and Firefox. But when tried on line on a test server I get a slim pop up that has not properly set the height.

  Would be - because the iframe is pre-configured before composition/html page first affecting the size?

  Help, please

  CODE USED:

  $. fancybox.open)

  {

  type: "iframe"

  autoScale: 'false. '

  height: '600'.

  Width: '600',

  HREF: 'llink.htm site publication. "

  }, {

  padding: 0

  });

  Other references: http://businessanywhere.biz/blog/2013/03/adding-a-lightbox-to-edge-animate/

  See you soon,.

  Jason

  HI koyissa,

  Thank you for your response to this.

  I worked on what was the problem - my external publication that was created to animate dashboard was centered horizontally and vertically.

  He created the problem. When I took this out of the box of fancy worked well.

  See you soon,.

  Jason

• In EPMA: What is the difference between the dimensions time and periods?

  In EPMA: What is the difference between the dimensions time and periods?

  The time dimension, I believe only applies to the epma essbase dimensions and creates a time dimension essbase.
  The period dimension can be applied to planning, essbase, consolidation.

  So if you create an application of epma essbase and want the functionality of a time dimension, then you create a time dimension.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Relation to the total column and row grand totals

  Hello world
  
  I have requirement I need to create a statement of expenses with BI Publisher in Siebel. I need to group the items of expense by date and have a show total amount for the row and column. The report should look like this when done:
  
  FEES
  Date of... Meals... Entertainment... Total
  06/19/09.........75......................175............................250
  06/20/09.........50 ..................... 50..............................100
  ------------------------------------------------------------------------
  Total... 125....................225............................350
  
  
  I do not know how to address the issue since the amounts for the "meal" and "Entertainment" is not stored in separate columns, but instead of this, there is a 'Category' column and a column 'amount '. The XML should look like this:
  
  
  < EXPENSE_REPORT >
  < ID > 232 / < ID >
  < NAME > fresh June < / NAME >
  
  < EXPENSE_ITEMS >
  < DATE > 19/06/09 < / DATE >
  MEAL < CATEGORY > < / CATEGORY >
  < > 25 < / AMOUNT >
  < / EXPENSE_ITEM >
  
  < EXPENSE_ITEMS >
  < DATE > 19/06/09 < / DATE >
  ENTERTAINMENT < CATEGORY > < / CATEGORY >
  < AMOUNT > 50 < / AMOUNT >
  < / EXPENSE_ITEM >
  
  < EXPENSE_ITEMS >
  < DATE > 20/06/09 < / DATE >
  MEAL < CATEGORY > < / CATEGORY >
  < AMOUNT > 50 < / AMOUNT >
  < / EXPENSE_ITEM >
  
  < / EXPENSE_REPORT >
  
  
  Any suggestions on how I should approach this? Thanks in advance.
  Fred
  
  Published by: Fred_1 on September 21, 2009 22:30

  Fred/Kumar,

  1. it should be simple enough to BEEP model too.
  2. a glance the link thread above, I answered how do in Datatemplate.
  3 Db rollup is also good option

  Look at this

  http://winrichman.blogspot.com/2009/09/cross-tab-summation-in-RTF.html

  Take a look at these too, it will help you for sure.

  http://winrichman.blogspot.com/search/label/cross%20tab
  http://winrichman.blogspot.com/search/label/BIP%20Vertical%20sum
  http://winrichman.blogspot.com/search/label/cross-tab
  http://winrichman.blogspot.com/search/label/summation%20In%20BIP

• Cannot show the dimensions of the image on a Mac?

  Hello

  I know in the 'Pictures' folder, you can select "Show view options" and then "view info point" and it will show dimensions photo... but it is not possible in a different directory, not to mention that the pictures folder?

  I photograph weddings for a living, and I'm fairly new to mac. Naturally, all my images are stored on external drives... I don't see the dimensions of the image? It seems that I have to open each image individually within the preview, and then press CTRL + I to see! Please tell me I'm wrong.

  4 K - end iMac 2014

  You can right-click (command-click a button or the trackpads) on the image file and select information.

  The title of the chapter more information, one of the entries is dimensions

  

  Alternatively, if you set the display of the viewfinder to the list, is one of the optional columns to Dimensions. Command-click on the column headers to add or remove columns.

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.