Ants in my laptop

Similar Questions

• Partition on HARD drive disappeared after formatting using the product recovery disc

  My laptop came with a partitioned hard drive C and D drives.

  After formatting my hard drive using the recovery disk of the supplied product with my computer, I don't have any option to partition the HARD drive, only for the 1. 46 GB for some recommended backup, and the remainder became the C drive.
  D drive disappeared. Now, when I put the USB ant in my laptop, it reads as D drive.
  Can you please help, I need to have my hard drive partitioned into C and D drives, and flash memory can be any subsequent letter.

  Hello Richard

  Is it so complicated to tell us which model of laptop you have exactly?
  Anyway, when you use recovery Toshiba you cannot lose score. After using the recovery media, you'll have to factory settings and the structure of the HARD disk will be the same as on the first day.
  Something like that is definitely not possible.

  > I don't have no option to partition the HARD disk
  This option doesn't exist. On some older models of laptops, just an option to set up the first score ability there.
  After the first start, you can go to disk management and activate the second partition. All that s!

  Please tell me what model of laptop have you then I can tell you more about the partitions.

• How can I capture video on Mac that works in Windows Premiere Elements?

  Hello. My PC is not a FireWire device because the FireWire card does not fit after I installed 2 video cards for crossfire, so the way to there, to capture video with my camera HD is on my Mac via FireWire. The problem is that video files captured on

  Mac do not work in Windows. My ideal configuration is one where I use the Mac simply to capture, and I say video programs like QuickTime or iMovie, to record the video captured on my pc (because my pc and Mac are connected via Ethernet). However, how can I enter in a way that makes the windows-compatible video files, without recourse to having to convert the videos every time? If I install first items in my Mac, will be able to capture in a way that makes the videos compatible with premiere elements on my PC?

  VideoHero

  I had the same problem when my old ant crashed the laptop a new was not equipped with firewire.

  As I use Elements I installed the software on 2 computers: my iMac and my Windows PC.

  It's perfectly legal, you can have the software on 2 personal equipment if you do not use at the

  same time (it's an installation DVD in my case) with a single license.

  When I capture on MAC with Premiere Elements, mpg files are created. You can use them to clip PC editing.

  In some cases I use iMovie to capture software natively time code splitting, that you can not with

  Elements with HDV footage. In this case, I need to convert files (with MPEG Streamclip) to be able to change

  with other software.

  ATR: it is a classic in Mac environment, because problem as the MPEG2 codec is not natively installed on the system,

  for the sake of license. You can buy an add-on (component MPEG2 Quicktime for Mac) on the apple store to be able to read MPEG2

  format QuickTime or iMovie, but it does not allow to write in this format. Apple has specific format used for HDV formats

  capture (a kind of extended MPEG2) in order to have the modification of the file with the HDV participation with iMovie.

  Best regards

  JM France

• Computer laptop MT cannot detect network Ant! My wireless works on all my other computers

  My computer laptop compac vista was working fine... then the next day it would not connect to my network. He cannot find a network. It is said that a cable is unplugged?

  Hi Riskmgr,

  I suggest you to uninstall the drivers for the computer's wireless card and update package newer driver by visiting the manufacturer's Web site.

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. the network adapter search for the driver of the wireless card.

  c. right-click on it and select uninstall.

  d. restart the computer and check.

  For more information, see the following article:

  Updated a hardware driver that is not working properly

  Compaq support

  Hope this information is useful.

• My observation - my 3 laptops Toshiba are fantastic job

  Just an observation, not a question.

  My first was a Satellite Pro 460CDT (W95)
  Second Tecra 8000 (W98SE)
  Third Satellite L300 - 1 g 6 (Vista Home Premium)

  All three still work as good as the day they were purchased.
  Never crashed or gave problems.
  Fantastic.

  Hi Ant

  Thanks for this review.
  I have 2 laptops a U400, satellite A210 and both are run correctly
  I installed Win XO too and noticed a good performance.

  Welcome them

• How can I export my connections Active and my list of extensions for my new laptop ((I use Firefox 3.6.4 and Win 7 on both))

  I want to just export my list of big "login" as the cause of firefox remembers and automatically type it again I've forgotten many of them! so if I can move this list to my laptop, it would be easier and more to connect on each site and each ant I have joined and join again and lose my Member or I have to request a new password for each site, then go to my email and connect, then change the password to the old It is very bad to do all of my connections!

  and also I can't move my extensions installed with currently option for firefox in my laptop with the same version of firefox "3.6.4" or I need to install again in the laptop?

  Note: both my computer and the new laptop running on Windows 7 Professional OEM and have the same version of firefox

  See http://kb.mozillazine.org/Password_Manager#Backing_up_and_restoring_passwords

  Password exporter: https://addons.mozilla.org/firefox/addon/2848

  http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  http://KB.mozillazine.org/Moving_your_profile_folder

  http://KB.mozillazine.org/Profile_backup

• Satellite A100-521 - white screen but the laptop works through external monitor

  The laptop above belongs to a friend of mine. Please can you advise if the screen is defective or possibly backlight?

  The laptop is a standard specification that is running xp home.

  I agree with Akuma. There must be a hardware problem.
  Of course, it is not easy to say with certainty what can be the problem.
  LCD
  FL inverter
  Display cable
  Who knows?

  Visit nearest service Ant that they test your laptop. they can say with certainty what the problem is here.

• wireless signal is low by next computer laptop

  wireless signal is low compared to adjacent laptop.  Can what adjustments or changes I make to wireless setup to eventually receive a signal stronger?

  Hi Steve,.

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, I see that you have found the laptop low wireless signal.

  For you help you please answer these questions:

  1. what operating system do you use?

  2. What is the brand and model of the laptop that has the problem?

  3. you Ant changes made to the computer before the show?

  I suggest you refer to the article provided:

  Why the my wireless signal strength is so low?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-wireless-signal-strength-so-low

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

• USB wireless adapter for computer laptop problem

  Hello:

  The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

  When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

  NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

  My question is;

  How to install the USB Netgear adapter for laptop?

  Thank you for your help in advance.

  Hello

  The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

  According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

  As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Have Windows Vista on laptop. Windows does not... message is received. "Configuring updates: stage 3 of 3-0% complete" and then nothing

  Windows Vista will not charge in my laptop.  Receiver of message, "Configuration of update: stage 3 3-0% complete" and "do npot disable competitor."

  This message stays on 2-3 minutes then disappears and screen becomes white., after a few minutes more the restart process restarts and crosses th same process again, again and again.  Ant suggestions?

  Hi Francis,.

  Try the following and see if it helps.

   

  Method 1:

  Rename the Pending.xml file, and then change the registry.

  
  Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) how to back up and restore the registry in Windows)

  To rename the Pending.xml file, and edit the registry, follow these steps.

  
  (A) start Windows Vista and go to system recovery options:

  1. Insert the Windows Vista installation disk into the disk drive and restart the computer.

  2. When you are prompted to restart from the disc, press any key.

  3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.

  4. on the page to install Windows, click on repair your computer.

  5. on the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next.

  B) use the system recovery options to rename the Pending.xml file and edit the registry:

  1. in the System Recovery Options page, click command prompt.

  2 type cd C:\windows\winsxs, and then press ENTER.

  3 type ren pending.xml pending.old, and then press ENTER.

  4. type regedit and press ENTER.

  5. select HKEY_LOCAL_MACHINE.

  6. on the file menu, click on load the hive.

  7. look for the following folder:

  C:\windows\system32\config\components

  8. When you are prompted for a name, type Offline_Components.

  9. in the registry editor, find and delete the following registry subkey:

  HLKM\Offline Components\AdvancedInstallersNeedResolving

  HKLM\Offline Components\PendingXmlIdentifier

  C) exit the Registry Editor:

  1. at the command prompt, type exit to quit the registry editor.

  2. press ENTER.

  3. click on restart.

  
  Method 2:

  Refer to the steps in the following Microsoft article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  Notes:

  Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope that the information provided is useful.

• 15 touch want: computer laptop recovery of cant

  My laptop has started to become unstable and very quickly everything that happens on a restart was a blue screen with an error 0xc00002e3. Now I Ant to get to the login screen and when I go to the recovery option advanced to try a system restore or recovery I get an error message indicating that no adminastrator are registerd and then he tries to take me to the login screen, which causes the error until I can connect. If I seem to be stuck in this loop. How can I make a recovery

  Wayne791 wrote:

  No I did not he that the laptop was already setup when I got, so I've never seen this request. I also didn't know on this subject until I started to study this problem. It is therefore a lesson hard for me. What I did was to order their part HP recovery support I hope it will work. Train your comment should I first copy all the important data of the player to the factory image recovery

  It's a shame that one who has implemented the specification says nothing about creating media recovery for you.

  Yes.  It is very important that you back up everything you don't want to lose a device to external storage or to another PC. A Factory image recovery is a destructive process that removes all the partitions.

  The recovery is expected to take care of it. You should receive the upgrade OEM HP USB stick recovery.

• How do I reboot my HP laptop

  Hello

  Hello would like to know how to reboot HP laptop or any body can give me a number for customer service thank you

  Hey oscarboy101,

  This could help you.

  Recovery -http://goo.gl/drcal

  Restore-(passez à la section qui dit «Restaurer Windows à un point antérieur») http://goo.gl/prfeT

  THX

• Ants inside

  Few days back ants were inside my laptop, after that they all came out, it will be harmful on my laptop? I don't think that ants still inside? the ants are really harmful for laptop inside parts? Pls answer

  Hello

  Depending on how long they remained there, if they built a colony in there, unless you clean properly worried.

  I hope this helps.

• Market of the revolting ants - walking AND flashing/flickering

  I work on my laptop on a photo safari in Utah. I took a few pictures of CR2 with my 7DII. Adobe Creative cloud indicates that the PS is updated.  Using Win 7 64 bit with 16 GB of RAM.

  I open the images in Photoshop CC (2015). When I make a selection using quick selection, diagonal elliptical marquee, lasso, or any other Ant market settings I have a problem. The moving dotted line steps not only but also flickers / flashes. Flashing, it is difficult to judge where is the border of the selection.

  Change of material significant only that I did is that I replaced my HDD with a SSD. I don't remember seeing this problem after I made the change; but I n ' reminder using PS, after I made the change.

  No other program on my laptop shows curious effects. The SSD certainly improves the performance of the system.

  Does anyone have any ideas or suggestions?

  Thanks for reading!

  Try to uncheck the box in the preferences > performance > graphics processor use, then by restarting Photoshop. If this solves the problem, check with the manufacturer about a possible update.

• How can I connect my 1Connectez 1st generation iPod (original iPod) to a laptop

  I have an original iPod and it has a screen old port how to connect it to a laptop and they don't have these kind of show ports more

  Not sure what you mean by "display port"...  The dock connector of the original iPod (2001) is a FireWire port.  You really have an original 1st gen iPod, with a (not key or click) scroll wheel that physically turns a circle?  Looks like this

  

  If so, it can connect to a computer equipped with a FireWire port .  To do this, not to connect to a USB port.  There are "scam" products that claim to be a USB-to-FireWire adapter cable, but they don't work; they can even cause damage to the iPod if used.  FireWire and USB work very differently (and even use different power supply voltages); You cannot connect them just by changing the shape of the connector.

  If your computer is a Mac (no FireWire port) with a Thunderbolt port, Apple sells a Thunderbolt-to-FireWire adapter.  On a Windows PC, to connect to the 1st (or 2nd) gen iPod, you add an expansion card of a certain type that provides an actual FireWire interface.  For more details, please provide more information on your situation.