Ants inside

Similar Questions

• S2440L Ant inside cover of glass at the front

  I have a strange problem with my Dell S2440L Monitor - 2 opposes inside the front glass - one is an Ant and other is a tiny particle of pixel size of 3-4. I don't know how it came. The Ant is here today and he is roaming inside the screen. The other thing I noticed two days back. It is a white color and it appears as a black dot, when the monitor is turned on. I see clearly that it is behind the glass. What is the solution? How can I remove these things? I looked at the monitor carefully and could not find any difference between the glass and the plastic frame.

  It should not cause future problems. Since you have not bought the monitor directly from Dell, you must do so at the time wherever she would need replacing...

  * For your country, please contact Dell order Support. They will have to contact Dell by internal Chat team WHILE you're on the phone with them. Provide the following information to the representative of the support order so that they can feed data to Dell via Chat team:
  Brick or = online store
  Purchase date =
  Monitor model =.
  Number of digit alphanumeric PPID monitor 20 =
  [Your]
  Email =
  Name =
  Shipping address =
  Phone =
  * The team will attempt to create a unique order number linking you to the PPID number monitor Dell. Once this done, can anyone support order then the installation program has to monitor as Exchange.

• Ant fails to compile the modules that use the interfaces

  Hi, I have a major problem to compile flex with ANT modules.

  I'll try to give ALL the necessary information, so we can avoid unnecessary questions novice days.

  I have an application that uses a lot of modules.  They compile perfectly in flash builder.

  First question.  How can I get flashbuilder 4.7 to show me the command line that he uses for mxmlc?  If I could see it, I could do it all myself.

  Second question: what is the problem with my work below?

  I have a module that looks like this:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Module ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  Implements = "com. Hof.lobby.modules.IVolatileAssets ".

  Width = "400" height = "300".

  creationComplete = "onDummy (event)" "

  >

  Inside this module, I have several other properties that are themselves instances of type various other interfaces.

  When I build the main application, all right.

  I created a macrodef of ANT to build all my modules effectively.

  < name macrodef = "buildModule" >

  < attribute name = "module name" default = "none" / >

  < attribute name = "module-package" default = "none" / >

  < attribute name = "out-path" default = "'." / > "

  < sequence >

  < echo message = "building @{module-name} for @{out-path}/@{module-name}.swf" / >} "

  "< file="${APP_ROOT}/src/@{module-package}/@{module-name}.mxml mxmlc ".

  output="${DEPLOY_DIR}/@{out-path}/@{module-name}.swf".

  Keep-generated-actionscript = "false".

  incremental = "false".

  Debug = 'true '.

  fork = "true".

  external load-trainees = "${ANT_ROOT}" / link - report.xml ' "

  optimize = "false".

  >

  < filename="${FLEX_HOME}/frameworks/flex-config.xml"/ load-config >

  < path-element source-path = "${FLEX_HOME} / frameworks" / >

  < compile .library-path dir = "${HOF_COMMON_ROOT}" append = "true" >

  < name = 'bin' / >

  < / compile .library-path >

  < compile .library-path dir = "${APP_ROOT} ' append ="true">

  < name = 'java' / >

  < / compile .library-path >

  < compile .library-path dir = "${FLEX_HOME} ' / managers ' append ="true">"

  < name = 'java' / >

  "" < name = "... /bundles/ {local}" / >

  < / compile .library-path >

  < path-element source-path = "${APP_ROOT} / src/locale / {local}" / >

  < / mxmlc >

  < / sequential >

  < / macrodef >

  < target name = "modulesDebug" depends = "lobbyDependencies" description = "Building the Hall modules for debug" >

  <!-< buildModule-module = module package "InboxDlg" name = "com/hof/Hall/modules/dlgs" off-path = "modules3/dlgs" / >-->

  < buildModule-name of the module = module package 'VolatileAssets' = ' com/hof/Hall/modules' off-path = "modules3" / >

  < / target >

  Then, when I run this goal, I get the following result:

  modulesDebug:

  [echo] building modules3/VolatileAssets.swf VolatileAssets

  [mxmlc] F:\var\sdk\flex_sdk_4.5.1.21328A\frameworks\flex-config.xml configuration file

  [mxmlc] F:\var\projects\hof\svn2.---.com\lobby\branches\3.1.39.0\src\com\hof\lobby\modules\Vola tileAssets.mxml(-1): Error: IVolatileAssets Interface was not found.

  [mxmlc] <? XML version = "1.0" encoding = "utf-8"? >

  BUILD FAILED

  F:\var\projects\hof\svn2.---.com\lobby\branches\3.1.39.0\build.XML:98: The following error occurred during the execution of this line:

  F:\var\projects\hof\svn2.---.com\lobby\branches\3.1.39.0\build.XML:51: mxmlc task impossible.

  Total time: 7 seconds

  If I remove the implements attribute in the definition of the module component, then I get a failure cascaded to EVERY SINGLE interface in the module.

  Basically something is causing ANT to fail to load the def for ANY interface class in the module.

  What on earth am I doing wrong?

  Help, please.

  Thank you.

  I answer my own thread because I absolutely HATE when I see a message with the problem I have and no response.

  Here is the answer to the problem:

  I had to create an external configuration file and load it with

  the content of ModuleConfig.xml re - defines almost every configuration framework.  None of them seem to non-standard for me...

  Basically I defined just to be what it SHOULD be and responsible for the config file after I applied the default flex - config.xml in the SDK.

  do what I posted below and it will work.

  so now my macrodef is:

  output="${DEPLOY_DIR}/@{out-path}/@{module-name}.swf".

  Keep-generated-actionscript = "false".

  incremental = "true".

  Debug="@{debug}.

  fork = "true".

  optimize = "false".

  Size-Report="${basedir}/Reports/@{module-Name}-size_report. XML ".

  >

  and my ModuleConfig file:

  http://www.Adobe.com/2006/flex-config">

  fake

  true

  flash.fonts.JREFontManager

  flash.fonts.BatikFontManager

  flash.fonts.AFEFontManager

  flash.fonts.CFFFontManager

  ${basedir} / src/locale / {local}

  ${basedir} / src

  true

  ${FLEX_HOME}frameworks/themes/Spark/spark.css

  http://ns.Adobe.com/MXML/2009

  ${FLEX_HOME} frames/mxml-2009 - manifest.xml

  Library://ns.Adobe.com/Flex/spark

  Frames/spark - manifest.xml ${FLEX_HOME}

  Library://ns.Adobe.com/Flex/MX

  Frames/mx - manifest.xml ${FLEX_HOME}

  http://www.Adobe.com/2006/MXML

  Frames/mxml - manifest.xml ${FLEX_HOME}

  Managers or the locale ${FLEX_HOME} / {local}

  ${FLEX_HOME}frameworks/libs/rpc.swc

  ${FLEX_HOME}frameworks/libs/osmf.swc

  ${FLEX_HOME}frameworks/libs/spark.swc

  ${FLEX_HOME}frameworks/libs/charts.swc

  ${FLEX_HOME}frameworks/libs/framework.swc

  ${FLEX_HOME}frameworks/libs/spark_dmv.swc

  ${FLEX_HOME}frameworks/libs/sparkskins.swc

  ${FLEX_HOME}frameworks/libs/textLayout.swc

  ${FLEX_HOME}frameworks/libs/advancedgrids.swc

  ${FLEX_HOME}frameworks/libs/authoringsupport.swc

  ${FLEX_HOME}frameworks/libs/flash-integration.swc

  ${FLEX_HOME}frameworks/libs/mx/mx.swc

  -owners libs - redacted-

  ${FLEX_HOME}frameworks/libs/player/10.2/playerglobal.swc

  en_US

  es_ES

  en_US

  IT_IT

  10.2

  11

  fake

  ${FLEX_HOME}frameworks/libs/framework.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/framework_4.5.1.21489.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  framework_4.5.1.21489.SWZ

  ${FLEX_HOME}frameworks/libs/textLayout.swc

  http://fpdownload.Adobe.com/pub/SWZ/tlf/2.0.0.232/textLayout_2.0.0.232.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  textLayout_2.0.0.232.swz

  ${FLEX_HOME}frameworks/libs/osmf.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/osmf_1.0.0.16316.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  osmf_1.0.0.16316.SWZ

  ${FLEX_HOME}frameworks/libs/spark.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/spark_4.5.1.21489.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  spark_4.5.1.21489.SWZ

  ${FLEX_HOME}frameworks/libs/sparkskins.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/sparkskins_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  sparkskins_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/rpc.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/rpc_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  rpc_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/charts.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/charts_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  charts_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/spark_dmv.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/spark_dmv_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  spark_dmv_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/mx/mx.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/MX_4.5.1.21489.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  MX_4.5.1.21489.SWZ

  ${FLEX_HOME}frameworks/libs/advancedgrids.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/advancedgrids_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  advancedgrids_4.5.1.21328.SWZ

  ${APP_ROOT}/src/@{module-package}/@{module-name}.mxml

  ${DEPLOY_DIR}/@{out-path}/@{module-name}.swf

• MacBook Pro with question mark inside a folder after fix

  So I have Macbook Pro 2012 13 "with a 500GB SSD and 8 GB of ram. In may, my computer would not boot into the operating system without previous indications of possible failure. It would display an exclamation mark inside a folder at startup (later, I thought means that the hard drive is a problem). I took it to Apple-authorized repair Tech on my campus and they were unable to understand the source of the problem, but said it was possible that my OS has been corrupted. After some searching myself, I started to think it was the TRIM bug which has been a known issue with Samsung. Samsung has gladly replaced my hard drive. I have connected the new hard drive and I fell again on the same issue. I started to consider the water of the hard drive has been the question... So I replaced that and was able to start again! Fast forward to today, several months later, and I have the same problem. However, now I can start in the OS sometimes while sometimes it will show the flashing icon. If the hard drive ribbon cable I bought was of bad quality, or that would indicate a bigger, more serious problem? I'm confused as to how to proceed to solve this problem. Any help is greatly appreciated!

  Yes, I suspect a problem with the new ribbon cable or its connection to the logic board.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Mac Book Pro cracked screen inside, no damage to the outside

  Hello

  I woke up this morning with mac book open and off. I have seen that my screen was quite dirty and decided I have to clean fingerprints on it. I used a Clorox and a paper towel to clean. Once I finished I turned an and saw my screen cracked. When I rubbed my finger on the screen it there's no indication on the front or the back of the screen he was hit there. It is only within the screen. I took it to apple and they said it was an accident, when I washed only the screen, as I did with several Mac Book Pro, I bought in the past. I have Applecare, but he does not apparently. No where else on my mac does show that I have damage and I did a diagnosis, and there is nothing else wrong with my system. They said that I am $ 800 and it's just scandalous due to a stream for the super screen thin on the inside. I don't know where to go from here, but I've used Apple products in my life and being a college student, I don't have that kind of money to fix. This problem should of never happened. I do all my graphics and coding on my Mac and have always loved. I also have a case of black Tech21 surrounding for added protection so something like this has not happened. Please if there is any help I can get here, it would be highly appreciated.

  Benjamin Schmidt

  Make your case to a store manager, but it is difficult to claim "just happened by itself." Be nice to the staff of the store, you are basically arguing for special treatment.

  It does not mean you did anything on purpose, but the MacBook was responsible, if you are responsible for. The cause could be anything from a drop of abrupt changes in temperature. Who knows...

  Good luck!

• ANT or heart Bluetooth Monitor strap compatibility?

  That is, compatibility with A separate more specific ANT/Bluetooth Heart Monitor strap?

  Hello

  If preferred to use the integrated heart rate monitor, Apple Watch can measure your heart rate via an external pair Bluetooth chest strap cardiofrequence-meter.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

• 'Stuck' inside an application with No Way Out

  I recently bought an iPad Mini 4, my first iOS device after years of Android. There is much to say about the iPad, and I can see why it has become so popular. There are things that I have to "unlearn" on Android to succeed with the iPad, and that is what is talking about this issue.

  When you work with the apps I sometimes find myself 'stuck' inside an application with no way to go back where I was before. There is no visible controls that move to be back, and swipe left/right/up/down does not help. The only thing I can do is quit the application by pressing the Home button.

  In Android, I can press the previous to go back to where I was before. I can go back in a full application to the first screen. Can I do this with my iPad Mini 4?

  Double-click the home button, then tap the application you want to switch to.

  --------

  iPad User Guide - web site:

  https://help.Apple.com/iPad/9/#

  iPad User Guide - iBook:

  https://iTunes.Apple.com/us/book/iPad-user-guide-for-iOS-9.3/id1035374126?Mt=11

• Duplicate a clip inside a compound

  I work with clips inside a compound Clip.  There's a part initially grayed out indicating the area that is not currently displayed on the parent timeline.  (for example the first minute of 00:00:00:00 to 00:01:00:00 is grey).

  Is it possible to duplicate the clip of scenario and position the copy for the departure to 00:00:00:00 - which is inside the greyed area?  FCPx won't let me slide the clip copied earlier to align with the original, instead, forcing them to start after the part greyed out 00:01:00:00 as soon as possible.

  Please don't ask why I need to do... it's complicated ;-), but it would be a great help if I could.

  See you soon,.

  Geoff

  What happens if you temporarily change the compensation in the parent timeline, edit the compound as you wish, then cut it to the original departure time?

  Oh, sorry... I can't resist but... Why?

• I moved my MBP (early 2015 model) on the side side by hearing something moving inside. Is this normal?

  My macbook has hit a metal on his front bench side (near the trackpad) while he was inside a foam case (the case was in a bag). I am worried about possible internal damage because they have no external damage to the unit. I also ran a test of the material in which you have to restart the computer and press the ' key; the results, said he did nothing wrong. But I noticed that a slight noise as if something was moving in the MBP I had moved it (or she gently shook), is this ok?

  Move the MBP should not create any noise.  If you can not open the MBP and inspect the inside of yourself, make an appointment with an Apple store genius bar and ask them to do.  It will be for FREE >

  Ciao.

• 1 TB SSD/Flash internal, more room inside?

  Howdy Yall,

  I just bought an iMac 27 "and went with a 1 TB hard drive"Flash"or SSD internal.  I realize that a hard 'Flash' is not really a 'hard' at least not in the traditional sense.  But...

  My question is... is there room inside the iMac 27 inches to install another drive "Flash"?  Or should I go with an external SSD if I want more space?

  If I need to go with an external, what is the best factor of form or style?  I know that it would be preferable to be style crush and not USB 3...  Can anyone recommend some current SSD that would be a good complement to the 1 TB internal SSD/Flash I already have?

  Thank you

  Damballa

  Do you mean that you went with a hybrid HDD/SSD or disc Fusion? The first is a HARD drive with a small amount of flash memory used for cached data. Although a bit faster than a HARD drive, it is much slower than a full SSD. The new iMacs don't use standard 2.5-inch SSD. They use variable size PCIe flash drives. This flash memory is combined with the internal HARD disk to make the Fusion drive. There's no room inside to add an another SSD.

  You can have added storage by connecting an external drive of any factor of size and shape of give. For maximum speed, use an external SSD connected using Thunderbolt. For a little more slow speed using USB 3.0. The latter is less expensive.

  The best naked SSD is OCZ, OWC, and Samsung.

• IMovie: video inside images

  Before in my Ipad, it was possible to put the video inside the images in the movie, but now I don't know how to do Mac. Help. Thank you

  You may think themes. Themes provide models of the image that you can insert your videos for a total look for your movie. In the timeline on the right, click settings. Then click No theme and will open a window of the themes.

• Does someone have a MagSafe 2 power adapter whose serial number is located inside the space where the two pins?

  Hi guys!

  I want to know if the power adapter of MagSafe2 that I just bought is genuine or counterfeit.

  I bought a MagSafe2 power adapter that has its serial number located inside the space where the two pins. Its model # is A1424. All the power MagSafe adapters I've seen always have serial number located under the round metal head big (I guess it's called head male or female?). Please see photo for reference.

  If any of you have or had any Apple Store, can you let me know?

  Thank you!

  

  My 85 Magsafe is exactly identical to your image.   It was 'inside the box' with a new MBP computer.

• There was a change today... And now I can not open my Ant Video Player... I can download it but I can't open the drive

  Firefox did some update today and now I can't open my Ant Video Player... I use it a ton so that it would be nice to solve this problem. Please / thank you

  Hi drk132, directly contact developers extension through their homepage support condition - they can probably give you more detailed advice and are the only ones who can fix bugs or make necessary adjustments in the addon for new versions of firefox. Thank you...

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• Why all the account folders are created inside my Inbox instead of on the same plane?

  Adding 2 accounts in Thunderbird it will only create the folders, trash, Junk, sent, Archive and models inside the Inbox. I want that they all on the same level as the Inbox as in my other 3 accounts.

  This is usually defined by the IMAP server, that some have so on one level, others insist that they hang out of the Inbox.

  Take a look in the menu (alt + T) tools > account settings > server settings > advanced

  Under the personal namespace, try inserting "Inbox" but make sure that you enable allow the server to roll over. If this is the Inbox, change to «» Sometimes these work, sometimes they do not. Really depends on the server.