Just starting to use flash CC pro using a PC. The mouse does not work on all popup windows. It works very well on the selection of everything etc, but not on the pop-up windows? Any advice? Thanks, Jim

Similar Questions

• My HP officejet 4500 works very well on my laptop (my computer alone), but windows has an error message saying that the printer is not a dirver. How can I fix this message?

  My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver.  How to stop this message?

  Visit the HP website and download the driver you need.

  Good luck.

• I have the UI which downloads the file in file multiprt transfer in chuncks. It worked very well in a previous version of firefox, but now ajax calls gets abandoned?

  I have the UI which downloads the file in file multiprt transfer in chuncks (blob file). It worked very well in a previous version of firefox when we send chuncks 10 MB for each ajax calls. But now in the last version of firefox, its get rejected for 10Mo chuncks with every call, but allowing only 4 KB be sent for each call. You guys could help me. I also tried with the Application (/ octectstream). It also works very well in all browsers.

  Hi Sivasathy, support.mozilla.org is intended for management of the end user. If you have questions about web development please refer to the place to go for support the developers instead. Thank you for your understanding!

• Flash CS4 crashes when you publish SWF big who previously worked very well

  Hi all

  It drives me crazy, I tried to look in the FAQ from Adobe and other places within this site but can't find a good solution to this, in fact I found people asking the same question. The fact is Im do a game that after publication is 7Mo SWF, it was working great and in fact I did no critical change here, only put to update a text field with typo (without code), then when I tried to publish it crashed (other great games I did make Flash crash too) and blocks even by hitting CTRL + ENTER or just by selecting file > > publish or file > > settings publication > > publish, I reinstalled all CS4 6 or 7 times and even had a tool from here to uninstall the player (I thought that it uninstalled the drive used IDE but its apparently the browser plugin) asuming the question might be there, but still crashes after I re - install, curiously small FLA files may seem, I looked into CS5 FAQ and saw that they can set the size of the cache there but I can't not find in CS4, and Im so uncertain, it's because of this but just my guess after all I've read about this, could someone help me please? Thank you very much in advance, I'm fighting this for 4 days almost without sleep

  
  

  IM using just as2 code in these projects I meantioned, and I have Windows Vista on this machine, only if this allows the resolve, once again, thank you for any clue

  
  

  
  

  Edit: Im not sure if this is the correct section or not, please receive my apologies if its wrong place that maybe it's intended only the code doubts but I couldn't find the right section to ask for it then please move to place cases when you can and I'm sorry for the inconvenience
  

  Re-create the preferences

• I have a html file and in it, I have a PHP contact form. However, the html code does not run php. pls help... Thank you

  I wrote a simple html Web page with menus and pull-down (using Dreamweaver) which also includes a contact form. The contact form is in PHP. However, when I run the html file, all right and that the contact form appears, however, she does not run PHP code. Do I have to make any changes of setting or download all the files? Thank you very much

  If you run your own apache server, then you need also a mail server, but if you use a hosted service then your host should have the scripts and HTML on their Web site.  Otherwise, you can use Wufoo free version and you can create your own form and code (JavaScript) that can be integrated into your HTML page. I used Wufoo in Joomla sites and it works very well.

• Satellite Pro L300-1FL - WLAN network adapter does not exist

  Model: Satellite Pro L300-1FL (PSLB9E)
  Operating system: XP Pro SP2
  Wireless card: PA3616u-1mpc (atheros AR5007)

  the laptop came with pre-installed vista, everything worked very well (including wireless), although a little slowly, but decided to downgrade to xp. integrated SATA drivers into my xp with nlite installation disc. XP installed fine. visited the toshiba support site and downloaded all the drivers for xp and install.

  Despite the installation of the wireless driver there is still no present in the wireless network card device driver. It is an "unknown" device listed, which I think is the wireless card.

  at first I was not sure what card appeared so systematically installed that all options of wlan of the toshiba download page [intel/atheros/realtek], none has worked. little more digging autour and discovery was a then reinstalled atheros atheros wlan client on the toshiba site. still did not work. found a update atheros ar5007 driver installed, still no joy.

  forward wireless switch is on [the orange light] and has been throughout the process. have you tried enabling / disabling fn + F8, which doesn't do anything.

  I think I read somewhere (having read much too many post on this over the last few days!) that update the BIOS to version 2.4 can solve the problem. However the version offered for my model by the toshiba page BIOS update is 2.1 (which I've updated when you install all drivers in xp) and I'm not that eager to update the BIOS to a version that is not supported by toshiba, because I have no idea how fix an incorrect BIOS prevents starting the computer.

  When you look at the BIOS option "wake we wireless" is grayed out and not selectable. There is no other network without wire/related parameters. This might infer that the BIOS does not recognize the card wireless for some reason any. whereas he should have before, I started to lose its time, as worked it fine under vista wireless. so I think that upgrading the BIOS might have broken, although I can't be sure that I've updated the BIOS until I realize that the without wire did not work under XP, so it could have been broken before the BIOS update. Does this sound plausible? also, I have no idea how if is take to solve this - you can downgrade the BIOS?

  any help greatly appreciated - have been pulling on my hair for 2 days now and there is only so much googling, you can do before find yourself you constantly re - visiting the same sites over and over again!

  Thank you

  ~ andy

  worried that he may have been conflict for different drivers wlan I had initially installed, so have done a complete re - format and re-installation of xp. Install the drivers, including the wlan driver atheros. but still no adapter wlan in Device Manager.

  the unknown device in the other section of the Device Manager is listed as an ethernet controller; However glancing upward from the PCI/VEN # (C & DEV_001C 168) on the basis of data from the provider PCI identifies that this is indeed the atheros card.

  This means that it is not a hardware/BIOS problem as I previously suspected. XP can 'see' the device, but for some reason, the driver won't work. Hmm

  someone at - it had a similar problem? is it just a matter of finding the "correct" driver

  Thank you

  ~ a

• On March 28, my ipad 2 use osi 9.2.1 air would not allow internet browsing so I updated to 9.3... I always have the same question. Any advice?

  On March 28, my ipad 2 use osi 9.2.1 air would not allow internet browsing so I updated to 9.3... I always have the same question. Any advice?

  Unfortunately, this is a common problem.

  Try turning off JavaScript under settings - Safari - Advanced.

  You can find more information at the link:

  For those having issues with the iOS 9.3 update please read...

  New construction of iOS with the latest bugfixes 9.3 is now available for download

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• I just started to use the Muse for our design agency and learn to build us a new site, I managed to create a basic Viewer that contains sliding images based on what I have to do now is have a window POP that goes into the details of the pr

  I just started to use the Muse for our design agency and learning how to build us a new site, I managed to create a basic Viewer that contains sliding images, what I have to do now is have a PDP window that goes into details on projects, what I want is a piece of text or icon that when you ride on it , and then click a separate window opens with additional information in, once finished reading the news, you can click to close the box, any advice on how to do this?

  The best way to do what you ask is with the widget of Composition. Start with the ToolTip predefined, which by default displays the info on working capital. You can change the display option to click, which is what you are looking for. You can also add the close button or the info disappear in slowing.

  David

• I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

  You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

  Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

  Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

• Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.

  Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.

  Hello

  Please try following the steps and see if it helps

  1. Please work through this guide.

  https://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html

  Follow the instructions in the guide on the provision of the dxdiag report and additional information on what you tested and observed.

  2 turn off hardware acceleration in the settings. Steps are mentioned in the link below

  How to disable or enable hardware acceleration?

  Thank you

• Use Firefox with flash 10.3.183.75 20.0.1, can not see the video if its built-in Flash. Can see perfectly if they are not incorporated. Chrome works very well.

  http://64.165.34.7:8134 / videoplayer3.html works well, but http://64.165.34.7:8134 / flash_ready.html does not load video in Firefox (black screen with the plug-in is needed, when you try to install "couldn't find any plugin"). Chrome works very well. IE shows an outline of the flan.

  flash_ready.html
  <!DOCTYPE html>
      <html>
          <head runat="server">
              <title>
                  HTML5 sample video player
              </title>
  </head>
  <body>
   <form id="Schedule" runat="server">
      <div >
  	  <EMBED height=500 width=700 src=http://64.165.34.7:8134/videoplayer3.html allowscriptaccess="always" wmode="transparent" allowFullScreen="true">
          </EMBED>
  		</div>
  		</form>
  </body>
  </html>
  
  videoplayer3.html
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <title>Sample HTML5 Video player</title>
  
  </head>
  
  <body>
  
  <h1>Sample HTML5 Video player demo</h1>
  
  <object type="application/x-shockwave-flash" data="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" width="640" height="360">
  	<param name="movie" value="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" />
  	<param name="allowFullScreen" value="true" />
  	<param name="wmode" value="transparent" />
  	<param name="flashVars" value="controls=true&amp;poster=http%3A%2F%2Fsandbox.thewikies.com%2Fvfe-generator%2Fimages%2Fbig-buck-bunny_poster.jpg&amp;src=http%3A%2F%2Fclips.vorwaerts-gmbh.de%2Fbig_buck_bunny.mp4" />
  	<img alt="Big Buck Bunny" src="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360" title="No video playback capabilities, please download the video below" />
  </object>
  <p>
  	<strong>Download video:</strong> <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4">MP4 format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.ogv">Ogg format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.webm">WebM format</a>
  </p>
  </body>
  </html>

  I used this instead of < embed >. He began working

  < object type = "text/html" data = "http://64.165.34.7:8134 / videoplayer3.html" style = "width: 460px;" "height: 260px" > < / object >

• How the hell a toolbar? I just started to use Firefox on my laptop and I don't yet have the hang of it!

  I just started to use Firefox on my laptop and I don't yet have the hang of it!

  See:

  • https://support.Mozilla.com/en-us/KB/uninstalling%20add-ons#w_how-to-disable-extensions0-personassf-and-plugins

• I just started to use a new version of Illustrator and the text I've created has a pink box behind, seems to be on the depth of the normal linespace, it is not visible in outline view, only in the preview. What is this and how do I get rid of him?

  I just started to use a new version of Illustrator and the text I've created has a pink box behind, seems to be on the depth of the normal linespace, it is not visible in outline view, only in the preview. What is this and how do I get rid of him?

  A pink box indicates that the font is not installed. This is a file that you have worked before, or is this a new file?