Any external device to record and store the video?

I need an external device (card reader, USB dongle, no matter) allows me to directly record and store video on this subject. My iPhone is already full, so I can't use something like an ordinary lightning flash drive, because he always would force me to record videos in my iPhone and then move it from there.

Any ideas?

An external device that can record and store video? Look like a video camera for me.

Tags: iPhone

Similar Questions

Download picture of URL link and store the Image in a Local folder in BB10 Webworks

Hello

I want to download the image of URL link and store the image in a local folder in Webworks BB10.
But I did not get the code for this.

If such knowledge code or have any solution then please help me...

Thank you best regards &,.

Laurent Subudhi

NitishSubudhi wrote:
I go through this code... but it is throwing the exception. That is to say "ReferenceError: Webworks is undefined '." "

According to the device/operating system, you need to add the extension of your installation of WebWorks as explained here for OS SmartPhone BB or PlayBook OS.

To use read the samples provided, they must work somehow. When I worked with the extension on PlayBook I only copy + pasted the provided source code and changed the attributes for the function call:
```
// You need to define "remotePath", "localPath", "onProgress", "onError", "options" like shown in documentationblackberry.io.fileTransfer.downloadFile(remotePath, localPath, onProgress, onError, options);
```
For OS SmartPhone BB the function call looks like this:
```
// You need to define "options" like shown in documentationwebworks.io.FileDownloader.download(options);
```
All think that all information provide here, try to follow and cela should operate.

How to acquire and store the values of DAQmx analog voltage (I do not want the graphic, but strings and values in a chart)?

Hello

How acquire and store the values of voltage DAQmx?

I tried several code example, but they can't get the chart. I don't want to chart. I want to measure exactly the analog voltage values and record these values - as an excel chart, that contains the selected channels and voltage values.

What the example code that I can use?

My hardware is NI PCI-6251.

Thank you very much.

Parsing xml and store the details in the hierarchical tables

Hi all
I'm trying to parse a xml code and store the details in the hierarchical tables, however, I am unable to analyze the child attributes of tags and store the details in relational format.
Oracle - 11.2.0.4 version
My XML looks like in below:
```
<Root>
<ParentTag name="JobName" attrib1="Text" attrib2="SomeOtherText">
  <ChildTag childAttrib1="SomeValue1" childAttrib2="SomeValue2" />
  <ChildTag childAttrib1="SomeValue3" childAttrib2="SomeValue4" />
  <ChildTag childAttrib1="SomeValue5" childAttrib2="SomeValue6" />

  <OtherChildTag childAttrib1="SomeValue1" childAttrib2="SomeValue2" />
</ParentTag>
</Root>
```
The table structure is as follows:

create the table parent_details
(
job_id number primary key,
VARCHAR2 (100) job_name,.
job_attrib1 varchar2 (100),
job_attrib2 varchar2 (100)
);

create the table child_details
(
child_id number primary key,
number of parent_job_id
child_attrib1 varchar2 (100),
child_attrib2 varchar2 (100),
Constraint fk_child_details foreign key (parent_job_id) refers to parent_details (job_id)
);

After analysis, I would expect the data to be stored in the format below:
```
Table Name:-
parent_details
ID Name     Attribute1  Attribute2
1  JobName  Text        SomeOtherText


ChildTable (Store Child Tag details)
ID Parent ID Attribute1  Attribute2
1  1         SomeValue1  SomeValue2
2  1         SomeValue3  SomeValue4
3  1         SomeValue5  SomeValue6
```
I tried following SQL, but it does not work. Please suggest if the same SQL can be improved to get the details in the expected format or should I use another solution.
```
select job_details.*
  from test_xml_table t,
       xmltable ('/Root/ParentTag'
                  passing t.col 
                  columns 
                    job_name varchar2(2000) path '@name',
                    attribute1 varchar2(2000) path '@attrib1',
                    attribute2 varchar2(2000) path '@attrib2',
                    childAttribute1 varchar2(2000) path '/ChildTag/@childAttrib1'
                ) job_details;
```
I'm not forced to have a SQL solution, but would if it can be in SQL.
Kind regards
Laureline.
Post edited by: Jen K - added the SQL, I tried to build.

Well, the XML contains hierarchical data, and SQL is a "dish" of data, so it's up to you to treat lines that are coming out of the flat style and determine how to get that in separate tables.

Suppose that we have several nodes of ParentTag each containing several nodes of ChildTag...

SQL > ed
A written file afiedt.buf

1 with t (xml) as (select xmltype ('))
2
3
4
5
6
7
8
9
10
11
12
13 ') of double)
14-
15 end of test data
16-
17 select x.p
18, x.name, x.attrib1, x.attrib2
19, including
20, y.childattrib1, y.childattrib2
21 t
22, xmltable ('/ Root/ParentTag ')
23 passage t.xml
p 24 columns for ordinalite
25, path name varchar2 (10) '. / @name'
26, path of varchar2 (10) of attrib1 '. / @attrib1 '

27, way to varchar2 (10) of attrib2 '. / @attrib2 '
28 children xmltype road '.'
29                 ) x
30, xmltable ('/ ParentTag/ChildTag ')
passage 31 x.children
c 32 columns for ordinalite
33, path of varchar2 (10) of childattrib1 '. / @childAttrib1 '
34 road of varchar2 (10) of childattrib2 '. / @childAttrib2 '
35*                ) y
SQL > /.

P NAME ATTRIB1 ATTRIB2 C CHILDATTRI CHILDATTRI
---------- ---------- ---------- ---------- ---------- ---------- ----------
1 text JobName SomeOtherT 1 SomeValue1 value2
1 text JobName SomeOtherT 2 SomeValue3 SomeValue4
1 text JobName SomeOtherT 3 SomeValue5 SomeValue6
JobName2 TextX SomeOtherT 1 SomeValue6 SomeValue8 2
JobName2 TextX SomeOtherT 2 SomeValue7 SomeValue9 2

Using the 'ordinalite' gives us the line number for this node in the XML file, so that you can identify each parent as well as to say who is the first record of this parent (because it will have a child with the ordinalite 1).

An INSERT ALL tuition assistance we can insert into two different tables at the same time to keep related data... for example

SQL > create table tbl1 (pk number, name varchar2 (10), attrib1 varchar2 (10), attrib2 varchar2 (10))
2.

Table created.

SQL > create table tbl2 (parent_pk number, attrib1 varchar2 (10), attrib2 varchar2 (10))
2.

Table created.

SQL > insert all
2 when c = 1 then
3 in the tbl1 (pk, attrib1, attrib2)
4 values (p, attrib1, attrib2)
When 5 1 = 1 then
6 in the tbl2 (parent_pk, attrib1, attrib2)
7 values (p, childattrib1, childattrib2)
8 with t (xml) as (select xmltype ('))
9
10
11
12
13
14
15
16
17
18
19
20 ') of double)
21 select x.p
22, x.name, x.attrib1, x.attrib2
23, including
24, y.childattrib1, y.childattrib2
25 t
26, xmltable ('/ Root/ParentTag ')
27 passage t.xml
p 28 columns for ordinalite
29, path name varchar2 (10) '. / @name'
30, path of varchar2 (10) of attrib1 '. / @attrib1 '
31, path of varchar2 (10) of attrib2 '. / @attrib2 '
32 children xmltype road '.'
33                 ) x
34, xmltable ('/ ParentTag/ChildTag ')
passage 35 x.children
c 36 columns for ordinalite
37, path of varchar2 (10) of childattrib1 '. / @childAttrib1 '
38, path of varchar2 (10) of childattrib2 '. / @childAttrib2 '
39                 ) y
40.

7 lines were created.

SQL > select * from tbl1;

PK ATTRIB1 ATTRIB2 NAME
---------- ---------- ---------- ----------
1 text JobName SomeOtherT
2 JobName2 TextX SomeOtherT

SQL > select * from tbl2.

PARENT_PK ATTRIB1 ATTRIB2
---------- ---------- ----------
1 SomeValue1 value2
1 SomeValue3 SomeValue4
1 SomeValue5 SomeValue6
SomeValue6 2 SomeValue8
SomeValue7 2 SomeValue9

Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

Hello

I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

Disable the anti-virus software

http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

Enable or disable Windows Firewall

http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

For reference:

Set up a computer-to-computer (ad hoc) network

http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

Note: The notes section through the link above.

My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

Hi chbradshaw,

Instead of filling & signature, tool, use the text comment comment tool, KB doc option. using comments in the PDF, Adobe Acrobat DC files (keyword: Add a text comment).

Kind regards

Nicos

I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video. Any suggestions?

As Tom SC replied, you must contact the company that manufactured your computer. In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

You should probably use a video capture card that can capture from HDMI source,

How to download and store the file in the device

I need to download and save a file to the server. Can any one go code me for this example.

Example of solution download a file via the URL: http://supportforums.blackberry.com/t5/Cascades-Development/How-to-download-zip-file-And-also-open-e...
It stores the file in your sandbox app directory. After that you can move anywhere.

Someone advise me on how to record and remember the actual information from a group of combo boxes?

I have a set of combo boxes save a devices status information. I would like to record and remind all selections. I know there are properties to access the selected items, but the research on, I do not know the technique to do so. I want to save/recall in XML format. I made an attempt, and he saved the combo box data, but not the selections. Thanks for any help.

Check the external hard drive (safely) and viruses the application of TPM security chip

Hello.

Context, to complain:

I had some problems with my new lenovo R61. But today, all right, the downgrade to xp okay, okay graphics card driver, partitioning ok. Westerday I was in the same point with Avast anti virus installed, install comodo firewall. I decide to install spybot and check an external hard drive. I allowed the choice of spybot to do something with some "dangerous" files After that point I didn't have the right to do nothing in the computor. "your not allowed to shut down the computer. "you may not... contact admin". "your unauthorized...

I forced reboot, press blue, recovered the system and decide to accept the help of norton, so I have norton installed.

Request1:

I want to check my external drive with any risk to the system, what I can do, I'm I might because I connect?

Request2:

Second small problem, when I try to registered my finger, it ask me to code of TPM which I did not. Is it safe to go into the bios and clear the security chip, I see a warning in the doc.

Thank you

Tom

compensation security chip is correct, but make sure that you do not have any password that you know, turn off all power on, the passwords for the supervisor/master before doing anything with security features.

Assistance needed for the registration of the application and store the values in a table

Hello

Hope that this explanation is not confusing. I explained my application you want in the text below and also attached a skeleton VI + screenshot hoping that he will clarify

I try to do a VI that does the following:
1. some code (blue Subvi) runs every 200ms
2. every 200ms, a random number is generated
3. the random numbers are stored in a table in intervals of time s 0.8 ("iterations")
4. at any time, the (blue Subvi) code needs to have access to the random numbers generated in 'the previous iteration.

To clarify, the iterations are as follows:
Iteration #1: 0 - 1.8 s
Iteration #2: 2 - 2. 8 s
Iteration #3: 3 - 3.8 s

Iteration #4: 4 - 4.8 s
..
And so on...

So for each iteration: the blue (Subvi) needs to have access to the random numbers generated in the previous iteration, for example:

Iteration #1 (0 - 1.8 s): The blue (Subvi) Gets an array that contains only the zero (random numbers are recorded for the first time)
Iteration #2 (2s - 2 8 s): The code gets an array containing random numbers of iteration #1
Iteration #3 (3 s - s 3.8): the code gets an array containing random numbers of iteration #2
Iteration #4 (3 s - s 3.8): the code gets an array containing random numbers of iteration #3
..
And so on...

At any given time in time;
-The code gets an array that contains all the random, recorded during the previous iteration numbers
-Values since before her previous iteration are ignored and not stored anywhere

Thus, for example, to the #7 iteration:

-The values during the iteration #6 are made available to the code in the form of a table

-Values of #1 to #5 iterations have been deleted and not stored anywhere

It is important that all values since before recording the previous iteration are deleted because they are not necessary because VI actaual will work for a long period of storage of numbers a lot more than I have indicated here

Screenshot of the skeleton VI:

I tried to play with the paintings, the structures of the case and the registers at offset, but everytime I try I get something wrong

The skeleton VI is also attached (Iteration_VI and Code_SubVI)

Any suggestions?

Thank you!

Yes, I agree that you need help. First of all, you really do need to learn more about LabVIEW - spend a few hours with the tutorials, such as those mentioned on the first page of the Forums. Oops - links to the tutorials which had been present for years seem to have been moved "elsewhere" with August 2016 LabVIEW community reorganization. But look for them...

Here are a few screws that basically implement what I described above (with some minor modifications). First of all, this is a Top level VI which runs at 5 Hz (200 msec waits). It starts with an array of 5 elements of 0, then once per second, this is replaced by a table of random numbers generated by the Random 5-table sub - VI 5 elements. Note that I do not use a loop timed - those who are really designed for LabVIEW RT, but use the simplest functions on the Palette of the timer.

Can't you see how that works? The array to initialize on the left begins you with a table of 5 elements of 0. The Timer inside the loop, it runs at 5 Hz, 'Index' counts 1, 2, 3,... to tell you where you are, and 5 shows you everything that lives on the shift register.

Now sub - VI Random 5-table is supposed to do the following - if she was called to 5, 10, 15,..., it must return a (new) array of 5 random numbers, otherwise, it must return the array that was passed in. So if all "works", table 5 shows 0, 0, 0, 0, 0 for the first second, a table at random for the second second (which is not superfluous!), a different for the third random picture second and so on. I have already said a way to build this, but I chose a slightly different method (equivalent).

Whenever it is called, a new random element is generated and added at the end of a (growing) random table stored in the shift register. If size become 5, we send this Random-table-of-5 out through Out table and reset the register shift to an empty array.

The case by default (when the size is not equal to 5) is shown below - we just return the array of entry to and accumulate new random table in full growth.

These code fragments extracted from VI. If you have LabVIEW 2016 (see the "2016" at the top right of the image? This shows that it is a snippet of code LabVIEW 2016), you can open a blank diagram and drag this image, where magic OR converts it to a VI. Otherwise, the code yourself and try out it.

Caution - it is designed to run once. If you run the program of high level, a second time, you may find that the new Random 5 - table appears to 0.4 ", 1.4", 2.4"(instead of 1", 2 ", 3"). I leave as an exercise for understand you to (a) why he is and (b) fix the code. If you can't do that, then move an another 3-4 hours with the LabVIEW tutorials (or start playing with this code, edit it in some small way and to understand how it works).

Bob Schor

What program to use to record and burn the DVD in Windows 8.1

Help, please. I had VISTA and he had a program to record and burn DVD do I need to duplicate this program for Windows 8? Thank you

Original title: Mackman

Hello Larry,.

Thanks for posting your query in Microsoft Community.

I understand that you have issues with the burning software for Windows 8.1. We will certainly help you with the same.

You can use the link below to burn a CD or DVD in Windows Media Player. You can burn audio or video files through this program.

Burn a CD or DVD in Windows Media Player

http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

Check also in store Windows there are some DVD burning software are available.

Check out the link:

http://Windows.Microsoft.com/en-in/Windows-8/Windows-store#1TC=T1

You can also use your favorite web browser and install the free DVD burning software.

Note: using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

I hope this helps. Feel free to write us again for assistance and we will be happy to help you come.

Double click and get and store the value in the variable.
Hello

It is my intention when I double click on a particular record on a table, I want to enter or store the specific record value in a variable and call this variable in the print/preview PLSQL code button.

Below, I show the screenshot that contains a preview in the form of table and print button. After filling in the data. user double click the code officer LC354 and click Print Preview/mode button, it should display the report for only the
Code of the agent of LC354(it's what I want). But normally when I click Preview before printing it affects wil see the report of the code of the agent of LC354 and LC325(which I don't).

http://ImageShack.us/photo/my-images/811/printpb.PNG/

My problem is how to capture the value ((*LC354*)) particular registration after double click the code(*LC354*) agent?

I tried to store the agent code in the variable AG_CNT in mouse double click trigger with after the plsql code. but it dosent work.
```
declare
AG_CNT varchar2(10);
begin
*AG_CNT* :=GET_ITEM_PROPERTY('RFQ_AGENT_DETAILS.AGENT_CODE',CURRENT_RECORD);
end;
```
After that pass this AG_CNT value in *: AG_CODE *. the code below is in the Print/Preview button.
```
     cursor c1 is select nvl(count(ENQUIRY_NO),0) from scott.EXP_QUOTE_STATUS 
     where ltrim(rtrim(upper(job_status))) like 'APPROVED%' and ENQUIRY_NO = :REQ_FOR_QUOT.ENQUIRY_NO
AND AGENT_CODE=*:AG_CODE* ;
```
How to do this?

SKUD.
Hello

When you click a folder, the focus moves to that record. To get the values of each element, just use the standard:
```
:value := block.item ;
```
François

Help needed to create a POP UP window and stores the values of the custom tab
Hello

I have a requirement to store a program competing in a custom table name.

Fields are concurrent_program_name, user_concurrent_program_name (of fnd_concurrent_programs_vl) and end_user_column_name (fnd_descr_flex_col_usage_vl setting) I finished the job of script to fill the value in the table.

Now the problem is that I have to design a creation page which have concurrent_program_name (LOV) and user_concurrent_program_name (MTI) and setting (link)

If the user selects the value in concurrent_program_name means LOV it should display a relevant user_concurrent_program_name (in MTI) and (window) settings.

So I create card LOV in Concurrent_program_name as follows: 1. the concurrent_program_name card 2. Map of the user_concurrent_program_name.

Now I select an LOV concurrent_program_name and it shows a user_concurrent_program_name in MTI. (Works fine)

I need help how to go ahead with parameters.

If the user clicks on the link he must navigate the window pop up and displays the values of the settings, now I need to keep the close button (if the close button hit the user navigates to page creation.) and if the user hit the button Save page create then it should record the following values of custom table (concurrent_program_name user_concurrent_program_name and settings).

Pls give me an idea to go ahead and also give me some articles about it.

Thank you

Corinne Bertrand
check out this blog to create a popup window http://mukx.blogspot.com/2007/07/javascript-in-oa-framework.html

You can create a button with 'Window.Close ()' to close the window...
You can get the parameters of CP in the following query

SELECT * from fnd_descr_flex_col_usage_vl
where as descriptive_flexfield_name ' $srs$. CONCURRENT_PROGRAM'
AND APPICATION_ID = xx

Warning : do not do transactions with the pop-up window.

For information about how to create the page, see Create exercise...

Prasanna-

Can I include a signature hosted on a remote server, create the signature in Tunderbird and store the file locally?

I want to insert a signature that I hosted on a web server without having to create and save the local html file on my computer, is it possible? I know that I can insert a picture from a web server as part of my signature, which is not what I'm asking. Is there an add-on or anything else that can help me to insert my signature from a web server directly, without having to host the file locally?

You do not have to store the signature on your computer, but Thunderbird will not bind to a text or HTML signature on a remote server file.

Thunderbird is waiting for you to provide a simple signature to provide the URL to the 'IMAGE' stored on the remote server and this link should be included in Thunderbird, if not how to be referenced in the message?

You can always include a link to the text that is stored remotely or a HTML signature in your message, but the recipient will activate it? Once again this link would be stored in the message

TB - 38, 3 Win10-PC

Any external device to record and store the video?

Similar Questions

Maybe you are looking for